33db298d70
* Update the Wistron platform support in master branch Signed-off-by: RogerX87 <RogerX87@gmail.com>
151 lines
6.9 KiB
Plaintext
151 lines
6.9 KiB
Plaintext
# Sample configuration file for smartd. See man smartd.conf.
|
|
|
|
# Home page is: http://www.smartmontools.org
|
|
|
|
# smartd will re-read the configuration file if it receives a HUP
|
|
# signal
|
|
|
|
# The file gives a list of devices to monitor using smartd, with one
|
|
# device per line. Text after a hash (#) is ignored, and you may use
|
|
# spaces and tabs for white space. You may use '\' to continue lines.
|
|
|
|
# You can usually identify which hard disks are on your system by
|
|
# looking in /proc/ide and in /proc/scsi.
|
|
|
|
# The word DEVICESCAN will cause any remaining lines in this
|
|
# configuration file to be ignored: it tells smartd to scan for all
|
|
# ATA and SCSI devices. DEVICESCAN may be followed by any of the
|
|
# Directives listed below, which will be applied to all devices that
|
|
# are found. Most users should comment out DEVICESCAN and explicitly
|
|
# list the devices that they wish to monitor.
|
|
#DEVICESCAN -d removable -n standby -m root -M exec /usr/share/smartmontools/smartd-runner
|
|
|
|
# Alternative setting to ignore temperature and power-on hours reports
|
|
# in syslog.
|
|
#DEVICESCAN -I 194 -I 231 -I 9
|
|
|
|
# Alternative setting to report more useful raw temperature in syslog.
|
|
#DEVICESCAN -R 194 -R 231 -I 9
|
|
|
|
# Alternative setting to report raw temperature changes >= 5 Celsius
|
|
# and min/max temperatures.
|
|
#DEVICESCAN -I 194 -I 231 -I 9 -W 5
|
|
|
|
# First ATA/SATA or SCSI/SAS disk. Monitor all attributes, enable
|
|
# automatic online data collection, automatic Attribute autosave, and
|
|
# start a short self-test every day between 2-3am, and a long self test
|
|
# Saturdays between 3-4am.
|
|
#/dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03)
|
|
|
|
# Monitor SMART status, ATA Error Log, Self-test log, and track
|
|
# changes in all attributes except for attribute 194
|
|
#/dev/sdb -H -l error -l selftest -t -I 194
|
|
|
|
# Monitor all attributes except normalized Temperature (usually 194),
|
|
# but track Temperature changes >= 4 Celsius, report Temperatures
|
|
# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
|
|
# Send mail on SMART failures or when Temperature is >= 55 Celsius.
|
|
#/dev/sdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
|
|
|
|
# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
|
|
# ATA Translation (SAT) layer is between the OS and the device then
|
|
# this can be flagged with the '-d sat' option. This situation may
|
|
# become common with SATA disks in SAS and FC environments.
|
|
# /dev/sda -a -d sat
|
|
|
|
# A very silent check. Only report SMART health status if it fails
|
|
# But send an email in this case
|
|
#/dev/sdc -H -C 0 -U 0 -m admin@example.com
|
|
|
|
# First two SCSI disks. This will monitor everything that smartd can
|
|
# monitor. Start extended self-tests Wednesdays between 6-7pm and
|
|
# Sundays between 1-2 am
|
|
#/dev/sda -d scsi -s L/../../3/18
|
|
#/dev/sdb -d scsi -s L/../../7/01
|
|
|
|
# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
|
|
# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
|
|
# and 4-5 am.
|
|
# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
|
|
# is DEPRECATED. Use the /dev/tweN character device interface instead.
|
|
# For example /dev/twe0, /dev/twe1, and so on.
|
|
#/dev/sdc -d 3ware,0 -a -s L/../../7/01
|
|
#/dev/sdc -d 3ware,1 -a -s L/../../7/02
|
|
#/dev/sdc -d 3ware,2 -a -s L/../../7/03
|
|
#/dev/sdc -d 3ware,3 -a -s L/../../7/04
|
|
|
|
# Monitor 2 ATA disks connected to a 3ware 9000 controller which
|
|
# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
|
|
# between 1-2 and 3-4 am.
|
|
#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
|
|
#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
|
|
|
|
# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
|
|
# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
|
|
# between 1-2 and 3-4 am.
|
|
# On FreeBSD /dev/tws0 should be used instead
|
|
#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
|
|
#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
|
|
|
|
# Same as above for Windows. Option '-d 3ware,N' is not necessary,
|
|
# disk (port) number is specified in device name.
|
|
# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
|
|
#/dev/hdc,0 -a -s L/../../2/01
|
|
#/dev/hdc,1 -a -s L/../../2/03
|
|
#
|
|
# Monitor 2 disks connected to the first HP SmartArray controller which
|
|
# uses the cciss driver. Start long tests on Sunday nights and short
|
|
# self-tests every night and send errors to root
|
|
#/dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
|
|
#/dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
|
|
|
|
# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
|
|
# self-tests Sundays between 1-2, 2-3, and 3-4 am.
|
|
#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
|
|
#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
|
|
#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
|
|
|
|
# Monitor 2 ATA disks connected to the same PMPort which connected to the
|
|
# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
|
|
#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
|
|
#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
|
|
|
|
# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
|
|
# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
|
|
#
|
|
# -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
|
|
# -T TYPE set the tolerance to one of: normal, permissive
|
|
# -o VAL Enable/disable automatic offline tests (on/off)
|
|
# -S VAL Enable/disable attribute autosave (on/off)
|
|
# -n MODE No check. MODE is one of: never, sleep, standby, idle
|
|
# -H Monitor SMART Health Status, report if failed
|
|
# -l TYPE Monitor SMART log. Type is one of: error, selftest
|
|
# -f Monitor for failure of any 'Usage' Attributes
|
|
# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
|
|
# -M TYPE Modify email warning behavior (see man page)
|
|
# -s REGE Start self-test when type/date matches regular expression (see man page)
|
|
# -p Report changes in 'Prefailure' Normalized Attributes
|
|
# -u Report changes in 'Usage' Normalized Attributes
|
|
# -t Equivalent to -p and -u Directives
|
|
# -r ID Also report Raw values of Attribute ID with -p, -u or -t
|
|
# -R ID Track changes in Attribute ID Raw value with -p, -u or -t
|
|
# -i ID Ignore Attribute ID for -f Directive
|
|
# -I ID Ignore Attribute ID for -p, -u or -t Directive
|
|
# -C ID Report if Current Pending Sector count non-zero
|
|
# -U ID Report if Offline Uncorrectable count non-zero
|
|
# -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
|
|
# -v N,ST Modifies labeling of Attribute N (see man page)
|
|
# -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
|
|
# -F TYPE Use firmware bug workaround. Type is one of: none, samsung
|
|
# -P TYPE Drive-specific presets: use, ignore, show, showall
|
|
# # Comment: text after a hash sign is ignored
|
|
# \ Line continuation character
|
|
# Attribute ID is a decimal integer 1 <= ID <= 255
|
|
# except for -C and -U, where ID = 0 turns them off.
|
|
# All but -d, -m and -M Directives are only implemented for ATA devices
|
|
#
|
|
# If the test string DEVICESCAN is the first uncommented text
|
|
# then smartd will scan for devices.
|
|
# DEVICESCAN may be followed by any desired Directives.
|
|
/dev/nvme0n1 -a
|