sonic-buildimage/files/initramfs-tools/arista-convertfs.j2
andywongarista 6e0559d5fa
[Arista] Add initial support for 720DT-48S (#10656)
Added initial set of config files to allow for booting and partial traffic testing in SONiC on the 720DT-48S.

How to verify it
- Switch boots
- show interfaces status shows links up on interfaces Ethernet24-51
- Traffic flows with no errors on interfaces Ethernet24-51
2022-06-29 09:56:24 -07:00

255 lines
7.1 KiB
Django/Jinja

#!/bin/sh
case $1 in
prereqs)
exit 0
;;
esac
set -e
# set -x
total_mem=$(free | awk '/^Mem:/{print $2}')
tmpfs_size=$(( $total_mem / 20 * 17 ))
free_mem_thres=$(( $total_mem / 20 * 18 ))
tmp_mnt='/mnt/ramdisk-convfs'
root_mnt='/mnt/root-convfs'
root_dev=''
flash_dev=''
block_flash=''
aboot_flag=''
backup_file=''
prev_os=''
sonic_fast_reboot=false
in_kdump=false
# Wait until get the fullpath of flash device, e.g., /dev/sda
wait_get_flash_dev() {
local try_rounds=30
while [ $try_rounds -gt 0 ]; do
for dev in $(ls /sys/block); do
local is_mmc=$(echo "$dev" | grep 'mmcblk.*boot.*' | cat)
if [ -n "$is_mmc" ]; then
continue
fi
local devid="$(realpath "/sys/block/$dev/device")/"
local is_device=$(echo "$devid" | grep '^/sys/devices/' | cat)
local is_flash=$(echo "$devid" | grep "$block_flash" | cat)
if [ -n "$is_device" -a -n "$is_flash" ]; then
flash_dev="/dev/$dev"
return 0
fi
done
sleep 1
try_rounds=$(( $try_rounds - 1 ))
done
return 1
}
# Wait for root_dev to be ready
wait_for_root_dev() {
local try_rounds=30
while [ $try_rounds -gt 0 ]; do
if blkid | sed 's/"//g' | grep -q "$root_dev"; then
return 0
fi
if [ -e "$root_dev" ]; then
return 0
fi
sleep 1
try_rounds=$(( $try_rounds - 1 ))
done
return 1
}
# Alway run cleanup before exit
cleanup() {
if grep -q "$root_mnt" /proc/mounts; then
umount "$root_mnt"
fi
if grep -q "$tmp_mnt" /proc/mounts; then
umount "$tmp_mnt"
fi
[ -e "$root_mnt" ] && rmdir "$root_mnt"
[ -e "$tmp_mnt" ] && rmdir "$tmp_mnt"
}
trap cleanup EXIT
notification() {
cat << EOF
A failure happend in modifying the root file system which stopped the upgrade. Manual interventions are needed to fix the issue. Note that:
1) files in the old root file system may have been lost and the old partition table may have been corrupted;
2) The files in the old root file system were copied to $tmp_mnt;
3) The old partition table was dumped to the file $tmp_mnt/$backup_file by sfdisk;
4) Quitting the current shell will lose all files mentioned above permanently.
EOF
}
run_cmd() {
if ! eval "$1"; then
echo "$2"
notification
sh
exit 1
fi
}
fixup_flash_permissions() {
# properly set flash permissions for others
# this allows the sonic admin user to have read access on the flash
local flash_mnt="$1"
chmod o+rx "$flash_mnt"
# remove all the filesystem acls from the flash
setfacl -Rb "$flash_mnt"
}
# Update ROOT device referring to the path under block_flash
# This is for the occasional name swap between /dev/sda and /dev/sdb
update_root() {
# Check that root=/dev/*, ignoring any cases like root=UUID=*
[ "${ROOT#/dev}" = "${ROOT}" ] && return 0
# Replace the beginning chars of ROOT by the ones of flash_dev with same index
{% raw %}
prefix_length="${#flash_dev}"
{% endraw %}
part_id="${ROOT:$prefix_length}"
ROOT="$flash_dev$part_id"
echo "ROOT=$ROOT" > /conf/param.conf
}
# Extract kernel parameters
set -- $(cat /proc/cmdline)
for x in "$@"; do
case "$x" in
block_flash=*)
block_flash="${x#block_flash=}"
;;
Aboot=*)
aboot_flag="${x#Aboot=}"
;;
loop=*)
x1="${x#loop=}"
image_dir="${x1%/*}"
;;
docker_inram=*)
docker_inram="${x#docker_inram=}"
;;
prev_os=*)
prev_os="${x#prev_os=}"
;;
SONIC_BOOT_TYPE=warm*|SONIC_BOOT_TYPE=fast*)
sonic_fast_reboot=true
;;
systemd.unit=kdump-tools.service)
in_kdump=true
;;
esac
done
# Check aboot
[ -z "$aboot_flag" ] && exit 0
# Check kdump
[ "$in_kdump" = true ] && exit 0
# Skip this script for warm-reboot/fast-reboot from sonic
[ "$sonic_fast_reboot" = true ] && [ "$prev_os" != eos ] && exit 0
# Get flash dev name
if [ -z "$block_flash" ]; then
echo "Error: flash device info is not provided"
exit 1
fi
if ! wait_get_flash_dev; then
echo "Error: flash device is not found"
exit 1
fi
# If root=/dev/*, update ROOT to the device under block_flash
update_root
root_dev="$ROOT"
if [ -z "$root_dev" ]; then
echo "Error: root device name is not provided"
exit 1
fi
if ! wait_for_root_dev; then
echo "Error: timeout in waiting for $root_dev"
exit 1
fi
# exit when the root is ext4
if ! blkid | grep "$root_dev.*vfat" -q; then
mkdir -p "$root_mnt"
mount -t ext4 "$root_dev" "$root_mnt"
fixup_flash_permissions "$root_mnt"
umount "$root_mnt"
rmdir "$root_mnt"
exit 0
fi
# Check memory size for tmpfs
free_mem=$(free | awk '/^Mem:/{print $4}')
if [ "$free_mem" -lt "$free_mem_thres" ]; then
echo "Error: memory is not enough"
exit 1
fi
# Backup partition table
mkdir -p "$root_mnt"
mount "$root_dev" "$root_mnt"
backup_file=backup.$(date +%Y-%m-%d.%H-%M-%S)
sfdisk -d "$flash_dev" > "$root_mnt/$backup_file"
# Check total size of files in root
total_file_size=$(du -s "$root_mnt" | awk '{print $1}')
if [ "$total_file_size" -gt "$tmpfs_size" ]; then
echo "Error: total file size is too large"
exit 1
fi
# Create tmpfs, and copy files to tmpfs
mkdir -p "$tmp_mnt"
mount -t tmpfs -o size="${tmpfs_size}k" tmpfs "$tmp_mnt"
cp -a "$root_mnt/." "$tmp_mnt/"
umount "$root_mnt"
#### Lines below will modify the root file system, so any failure will be trapped to shell for manual interventions.
if [ $(echo -n "$root_dev" | tail -c 1) == "1" ]; then
# Create a new partition table (content in flash_dev will be deleted)
err_msg="Error: Failed to zero out first MB"
cmd="dd if=/dev/zero of=$flash_dev bs=512 count=2048"
run_cmd "$cmd" "$err_msg"
err_msg="Error: repartitioning $flash_dev failed"
cmd="echo '2048' | sfdisk $flash_dev || (sleep 3; blockdev --rereadpt $flash_dev && fdisk -l $flash_dev | grep -q ${root_dev}.*Linux)"
run_cmd "$cmd" "$err_msg"
fi
sleep 2
err_msg="Error: timeout in waiting for $root_dev after repartition"
cmd="wait_for_root_dev"
run_cmd "$cmd" "$err_msg"
err_msg="Error: formatting to ext4 failed"
cmd="/usr/local/sbin/mke2fs -t ext4 -F -O '^huge_file,^metadata_csum' $root_dev"
run_cmd "$cmd" "$err_msg"
err_msg="Error: mounting $root_dev to $root_mnt failed"
cmd="mount -t ext4 $root_dev $root_mnt"
run_cmd "$cmd" "$err_msg"
if [ x"$docker_inram" != x"on" ]; then
err_msg="Error: extract docker directory"
cmd="[ -f $tmp_mnt/$image_dir/{{ FILESYSTEM_DOCKERFS }} ] && rm -rf $root_mnt/$image_dir/{{ DOCKERFS_DIR }} && mkdir -p $root_mnt/$image_dir/{{ DOCKERFS_DIR }} && tar xzf $tmp_mnt/$image_dir/{{ FILESYSTEM_DOCKERFS }} -C $root_mnt/$image_dir/{{ DOCKERFS_DIR }} && rm -f $tmp_mnt/$image_dir/{{ FILESYSTEM_DOCKERFS }}"
run_cmd "$cmd" "$err_msg"
fi
err_msg="Error: copying files form $tmp_mnt to $root_mnt failed"
cmd="cp -a $tmp_mnt/. $root_mnt/"
run_cmd "$cmd" "$err_msg"
fixup_flash_permissions "$root_mnt"