fec80293dd
* ZTP infrastructure changes to support DHCP discovery provisioning data - Dynamically generate DHCP client configuration based on current ZTP state - Added support to request and process hostname when using DHCPv6 - Do not process graphservice url dhcp option if ZTP is enabled, ZTP service will process it - Generate /e/n/i file with all active interfaces seeking address assignment via DHCP. Only interfaces that are created in Linux will be added to /e/n/i. Also DHCP is started only on linked up in-band interfaces. Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
69 lines
1.7 KiB
Plaintext
69 lines
1.7 KiB
Plaintext
# set classless routes based on the format specified in RFC3442
|
|
# e.g.:
|
|
# new_rfc3442_classless_static_routes='24 192 168 10 192 168 1 1 8 10 10 17 66 41'
|
|
# specifies the routes:
|
|
# 192.168.10.0/24 via 192.168.1.1
|
|
# 10.0.0.0/8 via 10.10.17.66.41
|
|
|
|
RUN="yes"
|
|
|
|
|
|
if [ "$RUN" = "yes" ]; then
|
|
if [ -n "$new_rfc3442_classless_static_routes" ]; then
|
|
if [ "$reason" = "BOUND" ] || [ "$reason" = "REBOOT" ]; then
|
|
|
|
set -- $new_rfc3442_classless_static_routes
|
|
|
|
while [ $# -gt 0 ]; do
|
|
net_length=$1
|
|
via_arg=''
|
|
|
|
case $net_length in
|
|
32|31|30|29|28|27|26|25)
|
|
net_address="${2}.${3}.${4}.${5}"
|
|
gateway="${6}.${7}.${8}.${9}"
|
|
shift 9
|
|
;;
|
|
24|23|22|21|20|19|18|17)
|
|
net_address="${2}.${3}.${4}.0"
|
|
gateway="${5}.${6}.${7}.${8}"
|
|
shift 8
|
|
;;
|
|
16|15|14|13|12|11|10|9)
|
|
net_address="${2}.${3}.0.0"
|
|
gateway="${4}.${5}.${6}.${7}"
|
|
shift 7
|
|
;;
|
|
8|7|6|5|4|3|2|1)
|
|
net_address="${2}.0.0.0"
|
|
gateway="${3}.${4}.${5}.${6}"
|
|
shift 6
|
|
;;
|
|
0) # default route
|
|
net_address="0.0.0.0"
|
|
gateway="${2}.${3}.${4}.${5}"
|
|
shift 5
|
|
;;
|
|
*) # error
|
|
return 1
|
|
;;
|
|
esac
|
|
|
|
# take care of link-local routes
|
|
if [ "${gateway}" != '0.0.0.0' ]; then
|
|
via_arg="via ${gateway}"
|
|
fi
|
|
|
|
# set route (ip detects host routes automatically)
|
|
if echo $interface | grep -v Ethernet ; then
|
|
ip -4 route add "${net_address}/${net_length}" \
|
|
${via_arg} dev "${interface}" table default >/dev/null 2>&1
|
|
else
|
|
ip -4 route add "${net_address}/${net_length}" \
|
|
${via_arg} dev "${interface}" >/dev/null 2>&1
|
|
fi
|
|
done
|
|
fi
|
|
fi
|
|
fi
|