#!/usr/bin/env python

try:
    import time
    import json
    from sonic_sfp.sfputilbase import SfpUtilBase 
except ImportError, e:
    raise ImportError (str(e) + "- required module not found")

attr_path = '/sys/class/hwmon/hwmon2/device/'
PLATFORM_INSTALL_INFO_FILE="/etc/sonic/platform_install.json"
PLATFORM_SFP_GROUPS = ['SFP-G01','SFP-G02','SFP-G03','SFP-G04','SFP-G05', 'SFP-G06', 'SFP-G07']

class SfpUtil(SfpUtilBase):
    """Platform specific SfpUtill class"""

    _port_start = 0
    _port_end = 55
    _qsfp_port_start = 48
    _port_in_block =56
    _port_to_eeprom_mapping = {}
    _global_port_pres_dict = {}

    def __init__(self):
        eeprom_path = "{}/eeprom"
        path_list = self.get_sfp_path()
        for x in range(self._port_start, self._port_end + 1):
            port_eeprom_path = eeprom_path.format(path_list[x])
            self._port_to_eeprom_mapping[x] = port_eeprom_path

        self.init_global_port_presence()        
        SfpUtilBase.__init__(self)

    def get_sfp_path(self):
        map = []
        with open(PLATFORM_INSTALL_INFO_FILE) as fd:
            install_info = json.load(fd)
            for sfp_group_name in PLATFORM_SFP_GROUPS:
                sfp_group = install_info[2][sfp_group_name]
                map = map + sfp_group['paths']
            return map
            
    def reset(self, port_num):
        # Check for invalid port_num
        if port_num < self._qsfp_port_start or port_num > self._port_end:
            return False

        path = attr_path+'ESQC610_QSFP/QSFP_reset'
        try:
            reg_file = open(path, 'w')
        except IOError as e:
            print( "Error: unable to open file: %s" % str(e))
            return False

        #toggle reset
        #reg_file.seek(0)
        reg_file.write(str(port_num-self._qsfp_port_start+1))
        #time.sleep(1)
        #reg_file.seek(0)
        #reg_file.write('0')
        reg_file.close()
        return True

    def set_low_power_mode(self, port_num, lpmode):
        # Check for invalid port_num
        if port_num < self._qsfp_port_start or port_num > self.port_end:
            return False

        path = attr_path+'ESQC610_QSFP/QSFP_low_power_'+str(port_num-self._qsfp_port_start+1)
        try:
            reg_file = open(path, 'w')
        except IOError as e:
            print( "Error: unable to open file: %s" % str(e))
            return False

        # the gpio pin is ACTIVE_HIGH
        if lpmode is True:
            val = "1"
        else:
            val = "0"

        # write value to gpio
        reg_file.seek(0)
        reg_file.write(val)
        reg_file.close()

        return True

    def get_low_power_mode(self, port_num):
        # Check for invalid port_num
        if port_num < self._qsfp_port_start or port_num > self._port_end:
            return False

        path = attr_path+'ESQC610_QSFP/QSFP_low_power_'+str(port_num-self._qsfp_port_start+1)
        try:
          reg_file = open(path, 'r')
        except IOError as e:
            print( "Error: unable to open file: %s" % str(e))
            return False 
       
        text_lines = reg_file.readline()
        reg_file.close()
        if text_lines.find('OFF') < 0:
            return True

        return False
        
    def get_presence(self, port_num):
        # Check for invalid port_num
        if port_num < self._port_start or port_num > self._port_end:
            return False

        if port_num >= self._qsfp_port_start:
            path = attr_path+'ESQC610_QSFP/QSFP_present'
            line = port_num - self._qsfp_port_start
        else:
            path = attr_path+'ESQC610_SFP/SFP_present'
            line = port_num
            
        try:
          reg_file = open(path, 'r')
        except IOError as e:
            print( "Error: unable to open file: %s" % str(e))
            return False
        text_lines = reg_file.readlines()
        reg_file.close()
        if text_lines[line].find('not') < 0:
            return True

        return False

    def init_global_port_presence(self):
        for port_num in range(self.port_start, (self.port_end + 1)):
            presence = self.get_presence(port_num)
            if(presence):
                self._global_port_pres_dict[port_num] = '1'
            else:
                self._global_port_pres_dict[port_num] = '0'  
 
    def get_transceiver_change_event(self, timeout=0):
        port_dict = {}
        while True:
            for port_num in range(self.port_start, (self.port_end + 1)):
                presence = self.get_presence(port_num)
                if(presence and self._global_port_pres_dict[port_num] == '0'):
                    self._global_port_pres_dict[port_num] = '1'
                    port_dict[port_num] = '1'
                elif(not presence and
                     self._global_port_pres_dict[port_num] == '1'):
                    self._global_port_pres_dict[port_num] = '0'
                    port_dict[port_num] = '0'

                if(len(port_dict) > 0):
                    return True, port_dict

            time.sleep(1)

    @property
    def port_start(self):
        return self._port_start

    @property
    def port_end(self):
        return self._port_end

    @property
    def qsfp_ports(self):
        return range(self._qsfp_port_start, self._port_in_block + 1)

    @property 
    def port_to_eeprom_mapping(self):
         return self._port_to_eeprom_mapping