# -*- coding: UTF-8 -*-
#-------------------------------------------------------------------------------
# Name: Ruijie python common module
# Purpose: called by other modules
#
# Author: rd
#
# Created: 02/07/2018
# Copyright: (c) rd 2018
#-------------------------------------------------------------------------------
################################driver-load-adaption#######################################################
# need to export interface
###################################################################################################
__all__ = ["fancontrol_loc", "fancontrol_config_loc", "GLOBALCONFIG", "MONITOR_CONST",
"RUIJIE_PART_NUMBER", "RUIJIE_LABEL_REVISION", "RUIJIE_ONIE_VERSION", "RUIJIE_MAC_SIZE",
"RUIJIE_MANUF_NAME", "RUIJIE_MANUF_COUNTRY", "RUIJIE_VENDOR_NAME", "RUIJIE_DIAG_VERSION",
"RUIJIE_SERVICE_TAG", "DEV_LEDS", "MEM_SLOTS", "LOCAL_LED_CONTROL", "FIRMWARE_TOOLS",
"STARTMODULE", "i2ccheck_params", "FANS_DEF", "factest_module", "MONITOR_TEMP_MIN",
"MONITOR_K", "MONITOR_MAC_IN", "MONITOR_DEFAULT_SPEED", "MONITOR_MAX_SPEED",
"MONITOR_MIN_SPEED", "MONITOR_MAC_ERROR_SPEED","MONITOR_FAN_TOTAL_NUM",
"MONITOR_MAC_UP_TEMP", "MONITOR_MAC_LOWER_TEMP","MONITOR_MAC_MAX_TEMP",
"MONITOR_FALL_TEMP","MONITOR_MAC_WARNING_THRESHOLD", "MONITOR_OUTTEMP_WARNING_THRESHOLD",
"MONITOR_BOARDTEMP_WARNING_THRESHOLD", "MONITOR_CPUTEMP_WARNING_THRESHOLD",
"MONITOR_INTEMP_WARNING_THRESHOLD", "MONITOR_MAC_CRITICAL_THRESHOLD",
"MONITOR_OUTTEMP_CRITICAL_THRESHOLD", "MONITOR_BOARDTEMP_CRITICAL_THRESHOLD",
"MONITOR_CPUTEMP_CRITICAL_THRESHOLD", "MONITOR_INTEMP_CRITICAL_THRESHOLD",
"MONITOR_CRITICAL_NUM", "MONITOR_SHAKE_TIME", "MONITOR_INTERVAL",
"MONITOR_MAC_SOURCE_SYSFS", "MONITOR_MAC_SOURCE_PATH", "MAC_AVS_PARAM",
"MAC_DEFAULT_PARAM", "MONITOR_SYS_LED", "MONITOR_SYS_FAN_LED", "MONITOR_FANS_LED",
"MONITOR_SYS_PSU_LED", "MONITOR_FAN_STATUS", "MONITOR_PSU_STATUS", "MONITOR_DEV_STATUS",
"MONITOR_DEV_STATUS_DECODE", "DEV_MONITOR_PARAM", "SLOT_MONITOR_PARAM", "fanloc",
"PCA9548START", "PCA9548BUSEND", "RUIJIE_CARDID", "RUIJIE_PRODUCTNAME", "FAN_PROTECT",
"rg_eeprom", "E2_LOC", "E2_PROTECT", "MAC_LED_RESET", "INIT_PARAM", "INIT_COMMAND",
"CPLDVERSIONS", "DRIVERLISTS", "DEVICE", "E2TYPE", "FRULISTS", "fanlevel_6510",
"fanlevel_6520", "fanlevel", "TEMPIDCHANGE", "FACTESTMODULE", "item1",
"test_sys_reload_item", "test_sys_item", "test_temp_item", "test_mem_item",
"test_hd_item", "test_rtc_item", "test_i2c_item", "test_cpld_item",
"test_portframe_item", "test_sysled_item", "test_fan_item", "test_power_item",
"test_usb_item", "test_prbs_item", "test_portbroadcast_item", "test_debug_level",
"test_log_level", "test_setmac", "test_setrtc", "log_level_critical", "log_level_debug",
"log_level_error", "log_level_info", "log_level_notset", "log_level_warning",
"test_e2_setmac_item", "test_bmc_setmac_item", "test_fan_setmac_item", "alltest",
"looptest", "diagtestall", "menuList", "TESTCASE", "PCIe_DEV_LIST", "PCIe_SPEED_ITEM"]
fancontrol_loc = "/usr/local/bin"
fancontrol_config_loc = "/usr/local/bin"
GLOBALCONFIG = "GLOBALCONFIG"
MONITOR_CONST = "MONITOR_CONST"
RUIJIE_PART_NUMBER = "RJ000001"
RUIJIE_LABEL_REVISION = "R01"
RUIJIE_ONIE_VERSION = "2018.02"
RUIJIE_MAC_SIZE = 3
RUIJIE_MANUF_NAME = "Ruijie"
RUIJIE_MANUF_COUNTRY = "CHN"
RUIJIE_VENDOR_NAME = "Ruijie"
RUIJIE_DIAG_VERSION = "0.1.0.15"
RUIJIE_SERVICE_TAG = "www.ruijie.com.cn"
DEV_LEDS = {}
MEM_SLOTS = []
LOCAL_LED_CONTROL = {
"CLOSE":{},
"OPEN":{}
}
FIRMWARE_TOOLS = {}
#start-up module
STARTMODULE = {
"fancontrol":1,
"avscontrol":1
}
i2ccheck_params = {"busend":"i2c-66","retrytime":6}
###################################################################################################
##### fan board ID reference
###################################################################################################
FANS_DEF = {
0x8100:"M6500-FAN-F",
0x8101:"M6510-FAN-F",
0x8102:"M6520-FAN-F",
0x8103:"M6510-FAN-R"
}
factest_module = {
"sysinfo_showfanmsg":1,
"sysinfo_showPsumsg":1,
"sysinfo_showrestfanmsg":0,
"sysinfo_showrestpsumsg":0
}
#################fan adjustment parameters ##############################
MONITOR_TEMP_MIN = 38 # temperature before speed-adjustment
MONITOR_K = 11 # adjustment algorithm
MONITOR_MAC_IN = 35 # temperature difference between mac and chip(backup)
MONITOR_DEFAULT_SPEED = 0x60 # default speed
MONITOR_MAX_SPEED = 0xFF # maximum speed
MONITOR_MIN_SPEED = 0x33 # minimum speed
MONITOR_MAC_ERROR_SPEED = 0XBB # MAC abnormal speed
MONITOR_FAN_TOTAL_NUM = 4 # 3+1 redundancy design, report to syslog if there is a error
MONITOR_MAC_UP_TEMP = 50 # MAC compared with inlet up
MONITOR_MAC_LOWER_TEMP = -50 # MAC compared with outlet down
MONITOR_MAC_MAX_TEMP = 100 #
MONITOR_FALL_TEMP = 4 # adjustment reduced temperature
MONITOR_MAC_WARNING_THRESHOLD = 100 #100
MONITOR_OUTTEMP_WARNING_THRESHOLD = 85
MONITOR_BOARDTEMP_WARNING_THRESHOLD = 85
MONITOR_CPUTEMP_WARNING_THRESHOLD = 85
MONITOR_INTEMP_WARNING_THRESHOLD = 70 #70
MONITOR_MAC_CRITICAL_THRESHOLD = 105 #105
MONITOR_OUTTEMP_CRITICAL_THRESHOLD = 90 #90
MONITOR_BOARDTEMP_CRITICAL_THRESHOLD = 90 #90
MONITOR_CPUTEMP_CRITICAL_THRESHOLD = 100 #100
MONITOR_INTEMP_CRITICAL_THRESHOLD = 80 # 80
MONITOR_CRITICAL_NUM = 3 #retry times
MONITOR_SHAKE_TIME = 20 #anti-shake times
MONITOR_INTERVAL = 60
MONITOR_MAC_SOURCE_SYSFS = 0 #1 get mac temperature from sysfs ,0 get mac temperature from bcmcmd
MONITOR_MAC_SOURCE_PATH = None #sysfs path
###################################################################
#####################MAC调压parameters (B6510)####################################
MAC_AVS_PARAM ={
0x72:0x0384 ,
0x73:0x037e ,
0x74:0x0378 ,
0x75:0x0372 ,
0x76:0x036b ,
0x77:0x0365 ,
0x78:0x035f ,
0x79:0x0359 ,
0x7a:0x0352 ,
0x7b:0x034c ,
0x7c:0x0346 ,
0x7d:0x0340 ,
0x7e:0x0339 ,
0x7f:0x0333 ,
0x80:0x032d ,
0x81:0x0327 ,
0x82:0x0320 ,
0x83:0x031a ,
0x84:0x0314 ,
0x85:0x030e ,
0x86:0x0307 ,
0x87:0x0301 ,
0x88:0x02fb ,
0x89:0x02f5 ,
0x8A:0x02ee
}
# default 6520 configuration
MAC_DEFAULT_PARAM = {
"type": 1, # type 1 represents default if out of range / 0 represents no voltage-adjustment if out of range
"default":0x74, # should be used with type
"loopaddr":0x00, # AVS loop address
"loop":0x00, # AVS loop value
"open":0x00, # diasble write-protection value
"close":0x40, # enable write-protection value
"bus":2, # AVSI2C bus address
"devno":0x60, # AVS address
"addr":0x21, # AVS voltage-adjustment address
"protectaddr":0x10, # AVS write-protection address
"sdkreg":"DMU_PCU_OTP_CONFIG_8", # SDK register name
"sdktype": 1, # type 0 represents no shift operation / 1 represents shift operation
"macregloc":24 , # shift operation
"mask": 0xff # mask after shift
}
MONITOR_SYS_LED = [
{"bus":2,"devno":0x33, "addr":0xb2, "yellow":0x06, "red":0x02,"green":0x04},
{"bus":2,"devno":0x32, "addr":0x72, "yellow":0x06, "red":0x02,"green":0x04}]
MONITOR_SYS_FAN_LED =[
{"bus":2,"devno":0x33, "addr":0xb4, "yellow":0x06, "red":0x02,"green":0x04},
]
MONITOR_FANS_LED = [
{"bus":2,"devno":0x32, "addr":0x23, "green":0x09, "red":0x0a},
{"bus":2,"devno":0x32, "addr":0x24, "green":0x09, "red":0x0a},
{"bus":2,"devno":0x32, "addr":0x25, "green":0x09, "red":0x0a},
{"bus":2,"devno":0x32, "addr":0x26, "green":0x09, "red":0x0a}]
MONITOR_SYS_PSU_LED =[
{"bus":2,"devno":0x33, "addr":0xb3, "yellow":0x06, "red":0x02,"green":0x04},
]
MONITOR_FAN_STATUS = [
{'status':'green' , 'minOkNum':4,'maxOkNum':4},
{'status':'yellow', 'minOkNum':3,'maxOkNum':3},
{'status':'red' , 'minOkNum':0,'maxOkNum':2},
]
MONITOR_PSU_STATUS = [
{'status':'green' , 'minOkNum':2,'maxOkNum':2},
{'status':'yellow', 'minOkNum':1,'maxOkNum':1},
{'status':'red' , 'minOkNum':0,'maxOkNum':0},
]
MONITOR_DEV_STATUS = {}
MONITOR_DEV_STATUS_DECODE = {}
DEV_MONITOR_PARAM = {}
SLOT_MONITOR_PARAM = {}
fanloc = {"name":"fanset","location":"0-0032/fan_speed_set"}
#####################MAC-Voltage-Adjustment-Parameters####################################
####================================Adaption-Area================================
#### RUIJIE_COMMON common configuration head
#### “platform” specific configuration head
####
PCA9548START = 11
PCA9548BUSEND = 74
RUIJIE_CARDID = 0x00004040
RUIJIE_PRODUCTNAME = "ruijie_b6510"
FAN_PROTECT = {"bus":0, "devno":0x32, "addr":0x19, "open":0x00, "close":0x0f}
rg_eeprom = "2-0057/eeprom"
E2_LOC = {"bus":2, "devno":0x57}
E2_PROTECT ={"bus":2, "devno":0x33, "addr":0xb0, "open":0, "close":1}
MAC_LED_RESET = {"pcibus":8, "slot":0, "fn":0, "bar":0, "offset":64, "reset":0x98}
INIT_PARAM = [
{"loc":"1-0034/sfp_enable","value": "01"},
{"loc":"2-0035/sfp_enable2","value":"ff"},
{"loc":"2-0033/mac_led", "value":"ff"},
{"loc":"1-0034/sfp_txdis1","value":"00"},
{"loc":"1-0034/sfp_txdis2","value":"00"},
{"loc":"1-0034/sfp_txdis3","value":"00"},
{"loc":"1-0036/sfp_txdis4","value":"00"},
{"loc":"1-0036/sfp_txdis5","value":"00"},
{"loc":"1-0036/sfp_txdis6","value":"00"},
{"loc":fanloc["location"], "value":"80"}
]
INIT_COMMAND = [
]
CPLDVERSIONS = [
{"loc":"2-0033/cpld_version","des":"MAC Board 上CPLDA"},
{"loc":"2-0035/cpld_version","des":"MAC Board 上CPLDB"},
{"loc":"2-0037/cpld_version","des":"CPU Board 上cpld"}
]
## Driver List
##
DRIVERLISTS = [
"i2c_dev",
"i2c_algo_bit",
"i2c_gpio",
"i2c_mux",
"i2c_mux_pca9641",
"i2c_mux_pca954x", # force_deselect_on_exit=1
"eeprom",
"at24",
"ruijie_platform",
"rg_cpld",
"rg_fan",
"rg_psu",
"csu550",
"rg_gpio_xeon",
#IPMIdriver
"ipmi_msghandler",
"ipmi_devintf",
"ipmi_si",
]
DEVICE = [
{"name":"pca9641","bus":0 ,"loc":0x10 },
{"name":"pca9548","bus":2 ,"loc":0x70 },
{"name":"lm75","bus": 2, "loc":0x48 },
{"name":"lm75","bus": 2, "loc":0x49 },
{"name":"lm75","bus": 2, "loc":0x4a },
{"name":"24c02","bus":2 , "loc":0x57 },
{"name":"rg_cpld","bus":2 ,"loc":0x33 },
{"name":"rg_cpld","bus":2 ,"loc":0x35 },
{"name":"rg_cpld","bus":2 ,"loc":0x37 },
{"name":"pca9548","bus":1,"loc":0x70 },
{"name":"pca9548","bus":1,"loc":0x71 },
{"name":"pca9548","bus":1,"loc":0x72 },
{"name":"pca9548","bus":1,"loc":0x73 },
{"name":"pca9548","bus":1,"loc":0x74 },
{"name":"pca9548","bus":1,"loc":0x75 },
{"name":"pca9548","bus":1,"loc":0x76 },
{"name":"pca9548","bus":1,"loc":0x77 },
{"name":"rg_fan","bus":3,"loc":0x53 },
{"name":"rg_fan","bus":4,"loc":0x53 },
{"name":"rg_fan","bus":5,"loc":0x53 },
#{"name":"rg_fan","bus":6,"loc":0x53 }, #specific fan
{"name":"rg_psu","bus":7 ,"loc":0x50 },
{"name":"csu550","bus":7 ,"loc":0x58 },
{"name":"rg_psu","bus":8 ,"loc":0x53 },
{"name":"csu550","bus":8 ,"loc":0x5b },
]
#####################FRU-Info-Adaption#################################
E2TYPE = {"1": "tlveeprom",
"2": "x86cpueeprom",
"3": "bmceeprom",
"4": "cpueeprom",
"5": "maceeprom",
"6": "sloteeprom",
"7": "fanconnecteeprom",
"8": "M1HFANI-F",
"9": "M1HFANI-R",
"A": "M2HFANI-F",
"B": "M2HFANI-R",
"C": "psu"}
FRULISTS = []
################################Manufacturing-Test-Adaption-Area#######################################################
# need to export interface
fanlevel_6510 = {
"level":[51,150,255],
"low_speed":[500,7500,17000],
"high_speed":[11000,22500,28500]
}
fanlevel_6520 = {
"level":[75,150,255],
"low_speed":[750,4250,6750],
"high_speed":[4500,7500,10000]
}
fanlevel = fanlevel_6520
TEMPIDCHANGE = {
"lm75in":"inlet",
"lm75out":"outlet",
"lm75hot":"hot-point",
"inlet":"lm75in",
"outlet":"lm75out",
"hot-point":"lm75hot",
}
# Manufacturing-Test module
FACTESTMODULE = { }
##################################Manufacturing-Test-Menu
item1 = {"name":"Single Test", "deal" :"test_signal", "childid":1}
test_sys_reload_item = {"name":"reset-system", "deal" :"test_sys_reload"}
test_sys_item = { "name":"Product information test", "deal" :"test_sysinfo"}
test_temp_item = { "name":"temperature test", "deal" :"test_tempinfo"}
test_mem_item = { "name":"Memory test", "deal" :"test_cpumemoryinfo"}
test_hd_item = { "name":"Hard disk test", "deal" :"test_hard"}
test_rtc_item = { "name":"RTC test ", "deal" :"test_rtc"}
test_i2c_item = { "name":"I2c test ", "deal" :"test_i2c"}
test_cpld_item = { "name":"CPLD test", "deal" :"test_cpld"}
test_portframe_item = { "name":"Port transmit-receive frame test", "deal" :"test_portframe"}
test_sysled_item = { "name":"System led test", "deal" :"test_led"}
test_fan_item = { "name":"Fan status test", "deal" :"test_fan"}
test_power_item = { "name":"PSU status test", "deal" :"test_power"}
test_usb_item = { "name":"USB test", "deal" :"test_usb"}
test_prbs_item = { "name":"PRBS test", "deal" :"test_prbs"}
test_portbroadcast_item = { "name":"Port broadcast", "deal" :"test_portbroadcast"}
test_debug_level = {"name":"Change debug level", "deal" :"test_setdebug"}
test_log_level = {"name":"Log output level", "deal" :"test_loginfolevel"}
test_setmac = {"name":"setmac", "deal" :"test_setmac"}
test_setrtc = {"name":"Set RTC", "deal" :"test_set_rtc"}
log_level_critical = {"name":"CRITICAL", "deal" :"test_log_critical"}
log_level_debug = {"name":"DEBUG", "deal" :"test_log_debug"}
log_level_error = {"name":"ERROR", "deal" :"test_log_error"}
log_level_info = {"name":"INFO", "deal" :"test_log_info"}
log_level_notset = {"name":"NOTSET", "deal" :"test_log_notset"}
log_level_warning = {"name":"WARNING", "deal" :"test_log_warning"}
test_e2_setmac_item = {"name":"E2SETMAC", "deal" :"test_e2_setmac"}
test_bmc_setmac_item = {"name":"BMCSETMAC", "deal" :"test_bmc_setmac"}
test_fan_setmac_item = {"name":"fan SETMAC", "deal" :"test_fan_setmac"}
alltest = [
test_sys_item,
test_temp_item,
test_mem_item,
test_hd_item,
test_rtc_item,
test_i2c_item,
test_cpld_item,
test_portframe_item,
test_sysled_item,
test_fan_item,
test_power_item,
test_usb_item,
test_prbs_item,
test_portbroadcast_item
]
looptest = [
test_sys_item,
test_temp_item,
test_mem_item,
test_hd_item,
test_rtc_item,
test_i2c_item,
test_cpld_item,
test_portframe_item,
test_fan_item,
test_power_item,
test_usb_item,
test_prbs_item,
test_portbroadcast_item ,
]
diagtestall = [
]
menuList =[
{
"menuid":0, "value":[
{"name":"Single test", "deal" :"test_signal", "childid":1},
{"name":"All test", "deal" :"test_all"},
{"name":"Loop test", "deal" :"test_loop"},
#{"name":"Check loop-test result", "deal" :"test_loop_read"},
#{"name":"Delete loop-test result", "deal" :"test_loop_delete"},
# {"name":"Load configuration", "deal" :"test_config"},
test_sys_reload_item,
{"name":"System Configuration", "deal" :"test_sysconfig","childid":2},
]
},
{
"menuid":1, "parentid":0, "value":[
test_sys_item ,
test_temp_item ,
test_mem_item ,
test_hd_item ,
test_rtc_item ,
test_i2c_item ,
test_cpld_item ,
test_portframe_item ,
test_sysled_item ,
test_fan_item ,
test_power_item ,
test_usb_item ,
test_prbs_item ,
test_portbroadcast_item ,
]},
{
"menuid":2, "parentid":0, "value":[
test_debug_level,
test_log_level ,
test_setmac ,
test_setrtc ,
]},
{
"menuid":3, "parentid":2, "value":[
log_level_critical ,
log_level_debug ,
log_level_error ,
log_level_info ,
log_level_notset ,
log_level_warning ,
]},
{
"menuid":4, "parentid":2, "value":[
test_e2_setmac_item ,
test_bmc_setmac_item,
test_fan_setmac_item,
]},
]
TESTCASE={
"CPLD":[
{"name":"CONNECT BOARD CPLD-A" ,"cases":[
{"name":"cpld32", "cmd":"grtd_test.py cpld_check 0 0x32 0xAA"},
{"name":"cpld37", "cmd":"grtd_test.py cpld_check 2 0x37 0xAC"},
]
},
{"name":"MAC BOARD CPLD-A" ,"cases":[
{"name":"cpld33", "cmd":"grtd_test.py cpld_check 2 0x33 0xAB"},
{"name":"cpld34", "cmd":"grtd_test.py cpld_check 1 0x34 0xAA"},
]
},
{"name":"MAC BOARD CPLD-B" ,"cases":[
{"name":"cpld36", "cmd":"grtd_test.py cpld_check 1 0x36 0xAA"},
{"name":"cpld35", "cmd":"grtd_test.py cpld_check 2 0x35 0xAB"},
]
},
],
"TEMPERATURE":[
{
"name":"-->temperature test" , "cases":[
{"name":"inlet","cmd":"grtd_test.py temp 2-0048/hwmon/hwmon1/temp1_input"},
{"name":"outlet","cmd":"grtd_test.py temp 2-0049/hwmon/hwmon2/temp1_input"},
{"name":"hot-point","cmd":"grtd_test.py temp 2-004a/hwmon/hwmon3/temp1_input"},
]
}
],
"MEMTORY":{
"cases":[
{"name":"->memory test 1M","cmd":"memtester 1M 1"},
{"name":"->memory test 2M","cmd":"memtester 2M 1"},
{"name":"->memory test 8M","cmd":"memtester 8M 1"},
# {"name":"->memory test 16M","cmd":"memtester 16M 1"},
# {"name":"->memory test 256M","cmd":"memtester 256M 1"},
]
},
"SMARTCTLCMDS":{
"cases":[
{"name":"->Check Hard Disk Info", "cmd":"smartctl -i /dev/sda"},
{"name":"->Check Hard Disk Monitor Status", "cmd":"smartctl -H /dev/sda"},
]
},
"LED":[
{"name":"Light Port Led test","cases":[
{"name":"-> Red Led Off", "cmd":"grtd_test.py led loc 1-0034/sfp_led1_red,1-0034/sfp_led2_red,1-0034/sfp_led3_red,1-0034/sfp_led8_red,1-0036/sfp_led4_red,1-0036/sfp_led5_red,1-0036/sfp_led6_red,1-0036/sfp_led7_red 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00"},
{"name":"-> Red Led On", "cmd":"grtd_test.py led loc 1-0034/sfp_led1_red,1-0034/sfp_led2_red,1-0034/sfp_led3_red,1-0034/sfp_led8_red,1-0036/sfp_led4_red,1-0036/sfp_led5_red,1-0036/sfp_led6_red,1-0036/sfp_led7_red 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff"},
{"name":"-> Recovery Red Led Off", "cmd":"grtd_test.py led loc 1-0034/sfp_led1_red,1-0034/sfp_led2_red,1-0034/sfp_led3_red,1-0034/sfp_led8_red,1-0036/sfp_led4_red,1-0036/sfp_led5_red,1-0036/sfp_led6_red,1-0036/sfp_led7_red 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00"},
{"name":"-> Yellow Led Off", "cmd":"grtd_test.py led loc 1-0034/sfp_led1_yellow,1-0034/sfp_led2_yellow,1-0034/sfp_led3_yellow,1-0034/sfp_led8_yellow,1-0036/sfp_led4_yellow,1-0036/sfp_led5_yellow,1-0036/sfp_led6_yellow,1-0036/sfp_led7_yellow 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00"},
{"name":"-> Yellow Led On", "cmd":"grtd_test.py led loc 1-0034/sfp_led1_yellow,1-0034/sfp_led2_yellow,1-0034/sfp_led3_yellow,1-0034/sfp_led8_yellow,1-0036/sfp_led4_yellow,1-0036/sfp_led5_yellow,1-0036/sfp_led6_yellow,1-0036/sfp_led7_yellow 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff"},
{"name":"-> Recovery Yellow Led Off", "cmd":"grtd_test.py led loc 1-0034/sfp_led1_yellow,1-0034/sfp_led2_yellow,1-0034/sfp_led3_yellow,1-0034/sfp_led8_yellow,1-0036/sfp_led4_yellow,1-0036/sfp_led5_yellow,1-0036/sfp_led6_yellow,1-0036/sfp_led7_yellow 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00"},
]
},
{"name":"fan 1 Led" ,"cases":[
{"name":"-> LedOff", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x0b"},
{"name":"-> Red Led ", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x0a"},
{"name":"-> Green Led ", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x09"},
{"name":"-> Yellow Led ", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x08"},
{"name":"-> Red Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x0e"},
{"name":"-> Green Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x0d"},
{"name":"-> Yellow Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x0c"},
{"name":"-> Recovery Green Led ", "cmd":"grtd_test.py led loc 0-0032/fan0_led 0x09"},
]
},
{"name":"fan 2 Led" ,"cases":[
{"name":"-> LedOff", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x0b"},
{"name":"-> Red Led ", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x0a"},
{"name":"-> Green Led ", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x09"},
{"name":"-> Yellow Led ", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x08"},
{"name":"-> Red Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x0e"},
{"name":"-> Green Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x0d"},
{"name":"-> Yellow Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x0c"},
{"name":"-> Recovery Green Led ", "cmd":"grtd_test.py led loc 0-0032/fan1_led 0x09"},
]
},
{"name":"fan 3 Led" ,"cases":[
{"name":"-> LedOff", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x0b"},
{"name":"-> Red Led ", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x0a"},
{"name":"-> Green Led ", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x09"},
{"name":"-> Yellow Led ", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x08"},
{"name":"-> Red Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x0e"},
{"name":"-> Green Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x0d"},
{"name":"-> Yellow Led Flashing", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x0c"},
{"name":"-> Recovery Green Led ", "cmd":"grtd_test.py led loc 0-0032/fan2_led 0x09"},
]
},
{"name":"Front panel CPU Led", "cases":[
{"name":"-> LedOff", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x00"},
{"name":"-> Green Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x01"},
{"name":"-> Red Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x02"},
{"name":"-> Yellow Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x03"},
{"name":"-> Green Led 1/4sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x11"},
{"name":"-> Green Led 1/2sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x21"},
{"name":"-> Green Led 1sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x41"},
{"name":"-> Green Led 2sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x81"},
{"name":"-> Red Led 1/4sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x12"},
{"name":"-> Red Led 1/2sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x22"},
{"name":"-> Red Led 1sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x42"},
{"name":"-> Red Led 2sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x82"},
{"name":"-> Yellow Led 1/4sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x13"},
{"name":"-> Yellow Led 1/2sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x23"},
{"name":"-> Yellow Led 1sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x43"},
{"name":"-> Yellow Led 2sFlashing ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x83"},
{"name":"-> Recovery Green Led ", "cmd":"grtd_test.py led loc 2-0035/broad_front_cpu 0x01"},
]
},
{"name":"Front panel BMC Led" ,"cases":[
{"name":"-> LedOff", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x00"},
{"name":"-> Red Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x01"},
{"name":"-> Red Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x02"},
{"name":"-> Green Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x03"},
{"name":"-> Green Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x04"},
{"name":"-> Yellow Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x05"},
{"name":"-> Yellow Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x06"},
{"name":"-> Recovery Green Led ", "cmd":"grtd_test.py led loc 2-0035/broad_front_bmc 0x04"},
]
},
{"name":"Front panel location Led" , "cases":[
{"name":"-> LedOff","cmd":"grtd_test.py led loc 2-0035/broad_front_lct 0xff"},
{"name":"-> LedOn","cmd":"grtd_test.py led loc 2-0035/broad_front_lct 0xfe"},
{"name":"->Recovery LedOff","cmd":"grtd_test.py led loc 2-0035/broad_front_lct 0xff"},
]
},
{"name":"Front panel pwr Led" ,"cases":[
{"name":"-> LedOff", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x00"},
{"name":"-> Red Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x01"},
{"name":"-> Red Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x02"},
{"name":"-> Green Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x03"},
{"name":"-> Green Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x04"},
{"name":"-> Yellow Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x05"},
{"name":"-> Yellow Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x06"},
{"name":"-> Recovery Green Led ", "cmd":"grtd_test.py led loc 2-0035/broad_front_pwr 0x04"},
]
},
{"name":"Front panel fan Led" ,"cases":[
{"name":"-> LedOff", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x00"},
{"name":"-> Red Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x01"},
{"name":"-> Red Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x02"},
{"name":"-> Green Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x03"},
{"name":"-> Green Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x04"},
{"name":"-> Yellow Led Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x05"},
{"name":"-> Yellow Led not Flashing", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x06"},
{"name":"-> Recovery Green Led ", "cmd":"grtd_test.py led loc 2-0035/broad_front_fan 0x04"},
]
},
],
"I2C":[
####type 1 represents value obtained compated with value
####type 2 represents return True or False
{"name":"I2C device test" ,"cases":[
{"name":" PCA9641 test", "cmd":"grtd_test.py dev_rd 0 10 0","deal_type":2},
{"name":" cpld32 test", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" cpld33 test", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" cpld34 test", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" cpld35 test", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" cpld36 test", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" cpld37 test", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" inlet LM75", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" outlet LM75", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" hot-point LM75", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" EEPROM", "cmd":"grtd_test.py dev_rd 0 32 0","deal_type":2},
{"name":" Port 1", "cmd":"grtd_test.py dev_rd 11 0050 0","deal_type":2},
{"name":" Port 2", "cmd":"grtd_test.py dev_rd 12 0050 0","deal_type":2},
{"name":" Port 3", "cmd":"grtd_test.py dev_rd 13 0050 0","deal_type":2},
{"name":" Port 4", "cmd":"grtd_test.py dev_rd 14 0050 0","deal_type":2},
{"name":" Port 5", "cmd":"grtd_test.py dev_rd 15 0050 0","deal_type":2},
{"name":" Port 6", "cmd":"grtd_test.py dev_rd 16 0050 0","deal_type":2},
{"name":" Port 7", "cmd":"grtd_test.py dev_rd 17 0050 0","deal_type":2},
{"name":" Port 8", "cmd":"grtd_test.py dev_rd 18 0050 0","deal_type":2},
{"name":" Port 9", "cmd":"grtd_test.py dev_rd 19 0050 0","deal_type":2},
{"name":" Port 10", "cmd":"grtd_test.py dev_rd 20 0050 0","deal_type":2},
{"name":" Port 11", "cmd":"grtd_test.py dev_rd 21 0050 0","deal_type":2},
{"name":" Port 12", "cmd":"grtd_test.py dev_rd 22 0050 0","deal_type":2},
{"name":" Port 13", "cmd":"grtd_test.py dev_rd 23 0050 0","deal_type":2},
{"name":" Port 14", "cmd":"grtd_test.py dev_rd 24 0050 0","deal_type":2},
{"name":" Port 15", "cmd":"grtd_test.py dev_rd 25 0050 0","deal_type":2},
{"name":" Port 16", "cmd":"grtd_test.py dev_rd 26 0050 0","deal_type":2},
{"name":" Port 17", "cmd":"grtd_test.py dev_rd 27 0050 0","deal_type":2},
{"name":" Port 18", "cmd":"grtd_test.py dev_rd 28 0050 0","deal_type":2},
{"name":" Port 19", "cmd":"grtd_test.py dev_rd 29 0050 0","deal_type":2},
{"name":" Port 20", "cmd":"grtd_test.py dev_rd 30 0050 0","deal_type":2},
{"name":" Port 21", "cmd":"grtd_test.py dev_rd 31 0050 0","deal_type":2},
{"name":" Port 22", "cmd":"grtd_test.py dev_rd 32 0050 0","deal_type":2},
{"name":" Port 23", "cmd":"grtd_test.py dev_rd 33 0050 0","deal_type":2},
{"name":" Port 24", "cmd":"grtd_test.py dev_rd 34 0050 0","deal_type":2},
{"name":" Port 25", "cmd":"grtd_test.py dev_rd 35 0050 0","deal_type":2},
{"name":" Port 26", "cmd":"grtd_test.py dev_rd 36 0050 0","deal_type":2},
{"name":" Port 27", "cmd":"grtd_test.py dev_rd 37 0050 0","deal_type":2},
{"name":" Port 28", "cmd":"grtd_test.py dev_rd 38 0050 0","deal_type":2},
{"name":" Port 29", "cmd":"grtd_test.py dev_rd 39 0050 0","deal_type":2},
{"name":" Port 30", "cmd":"grtd_test.py dev_rd 40 0050 0","deal_type":2},
{"name":" Port 31", "cmd":"grtd_test.py dev_rd 41 0050 0","deal_type":2},
{"name":" Port 32", "cmd":"grtd_test.py dev_rd 42 0050 0","deal_type":2},
{"name":" Port 33", "cmd":"grtd_test.py dev_rd 43 0050 0","deal_type":2},
{"name":" Port 34", "cmd":"grtd_test.py dev_rd 44 0050 0","deal_type":2},
{"name":" Port 35", "cmd":"grtd_test.py dev_rd 45 0050 0","deal_type":2},
{"name":" Port 36", "cmd":"grtd_test.py dev_rd 46 0050 0","deal_type":2},
{"name":" Port 37", "cmd":"grtd_test.py dev_rd 47 0050 0","deal_type":2},
{"name":" Port 38", "cmd":"grtd_test.py dev_rd 48 0050 0","deal_type":2},
{"name":" Port 39", "cmd":"grtd_test.py dev_rd 49 0050 0","deal_type":2},
{"name":" Port 40", "cmd":"grtd_test.py dev_rd 50 0050 0","deal_type":2},
{"name":" Port 41", "cmd":"grtd_test.py dev_rd 51 0050 0","deal_type":2},
{"name":" Port 42", "cmd":"grtd_test.py dev_rd 52 0050 0","deal_type":2},
{"name":" Port 43", "cmd":"grtd_test.py dev_rd 53 0050 0","deal_type":2},
{"name":" Port 44", "cmd":"grtd_test.py dev_rd 54 0050 0","deal_type":2},
{"name":" Port 45", "cmd":"grtd_test.py dev_rd 55 0050 0","deal_type":2},
{"name":" Port 46", "cmd":"grtd_test.py dev_rd 56 0050 0","deal_type":2},
{"name":" Port 47", "cmd":"grtd_test.py dev_rd 57 0050 0","deal_type":2},
{"name":" Port 48", "cmd":"grtd_test.py dev_rd 58 0050 0","deal_type":2},
{"name":" Port 49", "cmd":"grtd_test.py dev_rd 59 0050 0","deal_type":2},
{"name":" Port 50", "cmd":"grtd_test.py dev_rd 60 0050 0","deal_type":2},
{"name":" Port 51", "cmd":"grtd_test.py dev_rd 61 0050 0","deal_type":2},
{"name":" Port 52", "cmd":"grtd_test.py dev_rd 62 0050 0","deal_type":2},
{"name":" Port 53", "cmd":"grtd_test.py dev_rd 63 0050 0","deal_type":2},
{"name":" Port 54", "cmd":"grtd_test.py dev_rd 64 0050 0","deal_type":2},
{"name":" Port 55", "cmd":"grtd_test.py dev_rd 65 0050 0","deal_type":2},
{"name":" Port 56", "cmd":"grtd_test.py dev_rd 66 0050 0","deal_type":2},
{"name":" Port 57", "cmd":"grtd_test.py dev_rd 67 0050 0","deal_type":2},
{"name":" Port 58", "cmd":"grtd_test.py dev_rd 68 0050 0","deal_type":2},
{"name":" Port 59", "cmd":"grtd_test.py dev_rd 69 0050 0","deal_type":2},
{"name":" Port 60", "cmd":"grtd_test.py dev_rd 70 0050 0","deal_type":2},
{"name":" Port 61", "cmd":"grtd_test.py dev_rd 71 0050 0","deal_type":2},
{"name":" Port 62", "cmd":"grtd_test.py dev_rd 72 0050 0","deal_type":2},
{"name":" Port 63", "cmd":"grtd_test.py dev_rd 73 0050 0","deal_type":2},
{"name":" Port 64", "cmd":"grtd_test.py dev_rd 74 0050 0","deal_type":2},
]
},
],
}
PCIe_DEV_LIST = []
PCIe_SPEED_ITEM = []
################################Manufacturing-Test-Adaption-Area#######################################################