#!/bin/bash ######################################################################## # Copyright (c) 2020 Mellanox Technologies. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the names of the copyright holders nor the names of its # contributors may be used to endorse or promote products derived from # this software without specific prior written permission. # # Alternatively, this software may be distributed under the terms of the # GNU General Public License ("GPL") version 2 as published by the Free # Software Foundation. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # #==============================================================================# #= Global variable # #= #===== VERSION="1.3" #===== SWITCH_SSD_DEV="/dev/sda" UTIL_TITLE="This is MLNX SSD firmware update utility to read and write SSD FW. Version ${VERSION}" DEPENDECIES=("smartctl" "sha256sum" "tar" "/bin/bash" "gpg" "sed" "realpath" "dirname") TRUE="0" FALSE="1" ERR_MSG="ERR_MSG" INI_PREFIX="ini_section_" PUBLIC_CERT_NAME="trusted.gpg" CHECKSUM_NAME="checksum" SCRIPT_MODE="RELESE" # RELESE -or- DEBUG DEBUG_MSG="DEBUG" # remove all instance after script is ready. #===== PKG_EXTRACTED=$FALSE LOGGER_UTIL=$FALSE SSD_FW_VER="" SSD_DEVICE_MODEL="" SSD_SERIAL="" SSD_SIZE="" SECTIONS=() #===== ARG_IMAGE_FLAG=$FALSE ARG_IMAGE_VAL="" ARG_QUERY_FLAG=$FALSE ARG_YES_FLAG=$FALSE ARG_POWER_CYCLE_FLAG=$FALSE ARG_HELP_FLAG=$FALSE ARG_VERSION_FLAG=$FALSE ARG_PACKAGE_INFO_FLAG=$FALSE ARG_UPDATE_FLAG=$FALSE #==============================================================================# #= usage function. # #= function init_script() { # check if logger utility supported if [ -x "$(command -v logger)" ]; then LOGGER_UTIL=$TRUE else LOGGER_UTIL=$FALSE fi } #==============================================================================# #= usage function. # #= function usage() { echo echo -e "$UTIL_TITLE" echo echo -e "Usage:" echo -e "\tmlnx_ssd_fw_update.sh [OPTION]" echo -e "Commands:" echo -e "\t-i, --image\t\t Path to SSD FW package" echo -e "\t-q, --query\t\t Print SSD information (SSD model, serial number, version and size)" echo -e "\t\t\t\t Combined with image, comparison is made if update is required" echo -e "\t-p, --package-info\t Get package info" echo -e "\t-u, --update\t\t Upgrade firmware" echo -e "\t-y --yes\t\t Assume \"yes\" to all questions" echo -e "\t-V, --version\t\t Print utility version" echo -e "\t-h, --help\t\t Show this usage" echo -e "\t --power-cycle\t Execute power cycle at completion, even if not required" echo echo -e "Example:" echo -e "\tmlnx_ssd_fw_update.sh -q" echo -e "\tmlnx_ssd_fw_update.sh -q -i mlnx_ssd_fw_package.pkg" echo -e "\tmlnx_ssd_fw_update.sh -p -i mlnx_ssd_fw_package.pkg" echo -e "\tmlnx_ssd_fw_update.sh -u -i mlnx_ssd_fw_package.pkg" echo } #==============================================================================# #= Log function. # #= function LOG_MSG() { if [ $# -gt 0 ]; then LOG_STR=$1 if [[ $# -eq 1 ]]; then [[ "$LOGGER_UTIL" == "$TRUE" && "$LOG_STR" != "" ]] && logger -t mlnx_ssd_fw_update.sh -p user.notice $(echo "$LOG_STR" | sed 's/\\t//g') echo -e "$LOG_STR" elif [[ $# -eq 2 && "$2" == "$ERR_MSG" ]]; then [[ "$LOGGER_UTIL" == "$TRUE" && "$LOG_STR" != "" ]] && logger -t mlnx_ssd_fw_update.sh -p user.err $(echo "$LOG_STR" | sed 's/\\t//g') echo -e "$LOG_STR" elif [[ $# -eq 2 && "$2" == "$SCRIPT_MODE" ]]; then echo -e "DBG: $LOG_STR" fi fi } #==============================================================================# #= Log function. # #= function LOG_MSG_AND_EXIT() { LOG_MSG "$@" "$ERR_MSG" erase_extract_package "$extraction_path" LOG_MSG "Exiting..." exit 1 } #==============================================================================# #= This function check if given argument is valid and return boolean result. # #= function check_usage() { local argument_count=$# LOG_MSG "Number of argument:$argument_count" ${DEBUG_MSG} if [ $# -eq 0 ]; then LOG_MSG "Error: false usage given." usage exit 1 fi while [[ $# -gt 0 ]] do key="$1" case $key in -i|--image) ARG_IMAGE_FLAG=$TRUE ARG_IMAGE_VAL="$2" shift # past argument shift # past value ;; -q|--query) ARG_QUERY_FLAG=$TRUE shift # past argument ;; -y|--yes) ARG_YES_FLAG=$TRUE shift # past argument ;; -h|--help) ARG_HELP_FLAG=$TRUE shift # past argument ;; -V|--version) ARG_VERSION_FLAG=$TRUE shift # past argument ;; -u|--update) ARG_UPDATE_FLAG=$TRUE shift # past argument ;; -p|--package-info) ARG_PACKAGE_INFO_FLAG=$TRUE shift # past argument ;; --power-cycle) ARG_POWER_CYCLE_FLAG=$TRUE shift # past argument ;; *) LOG_MSG "Error: false usage given." usage exit 1 ;; esac done if [[ ("$ARG_IMAGE_FLAG" == "$TRUE" && ( $argument_count -lt 3 )) || ("$ARG_IMAGE_FLAG" == "$TRUE" && ( $argument_count -gt 5 )) || ("$ARG_PACKAGE_INFO_FLAG" == "$TRUE" && ( $argument_count -ne 3 )) || ("$ARG_QUERY_FLAG" == "$TRUE" && ( $argument_count -lt 1 )) || ("$ARG_QUERY_FLAG" == "$TRUE" && ( $argument_count -gt 3 )) || ("$ARG_HELP_FLAG" == "$TRUE" && ( $argument_count -gt 1 )) || ("$ARG_VERSION_FLAG" == "$TRUE" && ( $argument_count -gt 1 )) || ("$ARG_IMAGE_FLAG" == "$TRUE" && "$ARG_IMAGE_VAL" == "") || ("$ARG_UPDATE_FLAG" == "$TRUE" && "$ARG_IMAGE_FLAG" == "$FALSE") || ("$ARG_PACKAGE_INFO_FLAG" == "$TRUE" && "$ARG_IMAGE_FLAG" == "$FALSE") || ("$ARG_POWER_CYCLE_FLAG" == "$TRUE" && "$ARG_UPDATE_FLAG" == "$FALSE") || ("$ARG_UPDATE_FLAG" == "$TRUE" && "$ARG_PACKAGE_INFO_FLAG" == "$TRUE") ]]; then LOG_MSG "Error: false usage given." usage exit 1 fi ### Debug message remove when script is done. LOG_MSG "ARG_IMAGE_FLAG = ${ARG_IMAGE_FLAG}" ${DEBUG_MSG} LOG_MSG "ARG_IMAGE_VAL = ${ARG_IMAGE_VAL}" ${DEBUG_MSG} LOG_MSG "ARG_QUERY_FLAG = ${ARG_QUERY_FLAG}" ${DEBUG_MSG} LOG_MSG "ARG_YES_FLAG = ${ARG_YES_FLAG}" ${DEBUG_MSG} LOG_MSG "ARG_HELP_FLAG = ${ARG_HELP_FLAG}" ${DEBUG_MSG} LOG_MSG "ARG_VERSION_FLAG = ${ARG_VERSION_FLAG}" ${DEBUG_MSG} LOG_MSG "ARG_PACKAGE_INFO_FLAG = ${ARG_PACKAGE_INFO_FLAG}" ${DEBUG_MSG} LOG_MSG "ARG_POWER_CYCLE_FLAG = ${ARG_POWER_CYCLE_FLAG}" ${DEBUG_MSG} } #==============================================================================# # This function return SSD fw version using hdparm utility # # function get_ssd_fw_version() { [ $1 ] || { LOG_MSG_AND_EXIT "Wrong usage - ${FUNCNAME[0]}()"; } local device_fw_version device_fw_version=$(smartctl -i $SWITCH_SSD_DEV | grep -Po "Firmware Version: +\K[^,]+") LOG_MSG "device_fw_version: $device_fw_version" ${DEBUG_MSG} eval $1='$device_fw_version' } #==============================================================================# # This function return SSD device model using hdparm utility # # function get_ssd_device_model() { [ $1 ] || { LOG_MSG_AND_EXIT "Wrong usage - ${FUNCNAME[0]}()"; } local device_model_name device_model_name=$(smartctl -i $SWITCH_SSD_DEV | grep -Po "Device Model: +\K[^,]+") LOG_MSG "device_model_name: $device_model_name" ${DEBUG_MSG} eval $1='$device_model_name' } #==============================================================================# # This function return SSD size using hdparm utility # # function get_ssd_size() { [ $1 ] || { LOG_MSG_AND_EXIT "Wrong usage - ${FUNCNAME[0]}()"; } local device_size device_size=$(smartctl -i $SWITCH_SSD_DEV | grep -Po "User Capacity:.+bytes \[\K[^ ]+") LOG_MSG "device_size: $device_size" ${DEBUG_MSG} eval $1='$device_size' } #==============================================================================# # This function return SSD serial using hdparm utility # # function get_ssd_serial() { [ $1 ] || { LOG_MSG_AND_EXIT "Wrong usage - ${FUNCNAME[0]}()"; } local device_serial device_serial=$(smartctl -i $SWITCH_SSD_DEV | grep -Po "Serial Number: +\K[^,]+") LOG_MSG "device_serial: $device_serial" ${DEBUG_MSG} eval $1='$device_serial' } #==============================================================================# #= This function check if given argument is valid and return boolean result. # #= function get_ssd_info() { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} get_ssd_fw_version SSD_FW_VER get_ssd_device_model SSD_DEVICE_MODEL get_ssd_serial SSD_SERIAL get_ssd_size SSD_SIZE } #==============================================================================# #= This function check if given argument is valid and return boolean result. # #= function check_tool_dependencies() { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} for i in "${!DEPENDECIES[@]}" do if [ ! -x "$(command -v ${DEPENDECIES[$i]})" ]; then LOG_MSG_AND_EXIT "Error: This tool require the following utils to be installed ${DEPENDECIES[$i]}" fi done } #==============================================================================# #= This function parse package ini file and declare it attributes # #= function ini_parser { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} local filename="$1" LOG_MSG "filename:$filename" ${DEBUG_MSG} shopt -p extglob &> /dev/null CHANGE_EXTGLOB=$? if [ $CHANGE_EXTGLOB = 1 ] then shopt -s extglob fi ini="$(<$filename)" # read the file ini=${ini//$'\r'/} # remove linefeed i.e dos2unix ini="${ini//[/\\[}" ini="${ini//]/\\]}" IFS=$'\n' && ini=( ${ini} ) # convert to line-array ini=( ${ini[*]//\)/\\\)} ) # append / before any parenthesis ini=( ${ini[*]//\(/\\\(} ) # append / before any parenthesis ini=( ${ini[*]/#*([[:space:]]);*/} ) ini=( ${ini[*]/#*([[:space:]])\#*/} ) ini=( ${ini[*]/#+([[:space:]])/} ) # remove init whitespace ini=( ${ini[*]/%+([[:space:]])/} ) # remove ending whitespace ini=( ${ini[*]/*([[:space:]])=*([[:space:]])/=} ) # remove whitespace around = ini=( ${ini[*]/#\\[/\}$'\n'"$INI_PREFIX"} ) # set section prefix ini=( ${ini[*]/%\\]/ \(} ) # convert text2function (1) ini=( ${ini[*]/=/=\( } ) # convert item to array ini=( ${ini[*]/%/ \)} ) # close array parenthesis ini=( ${ini[*]/%\\ \)/ \\} ) # the multiline trick ini=( ${ini[*]/%\( \)/\(\) \{} ) # convert text2function (2) ini=( ${ini[*]/%\} \)/\}} ) # remove extra parenthesis ini=( ${ini[*]/%\{/\{$'\n''ini_unset ${FUNCNAME/#'$INI_PREFIX'}'$'\n'} ) # clean previous definition of section ini[0]="" # remove first element ini[${#ini[*]} + 1]='}' # add the last brace eval "$(echo "${ini[*]}")" # eval the result [ $? -ne 0 ] && LOG_MSG_AND_EXIT "Error: failed to parse package content." SECTIONS="$(echo ${ini[*]} | grep -Po "$INI_PREFIX+\K[\w]+")" if [ $CHANGE_EXTGLOB = 1 ] then shopt -u extglob fi } #==============================================================================# #= This function unset parse ini section and variables # #= function ini_unset { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} SECTION=$1 OLDIFS="$IFS" IFS=' '$'\n' if [ -z "$SECTION" ] then fun="$(declare -F)" else fun="$(declare -F $INI_PREFIX$SECTION)" if [ -z "$fun" ] then echo "section $SECTION not found" 1>&2 return fi fi fun="${fun//declare -f/}" for f in $fun; do [ "${f#$INI_PREFIX}" == "${f}" ] && continue item="$(declare -f ${f})" item="${item##*\{}" # remove function definition item="${item##*FUNCNAME*$INI_PREFIX\};}" # remove clear section item="${item/\}}" # remove function close item="${item%)*}" # remove everything after parenthesis item="${item});" # add close parenthesis vars="" while [ "$item" != "" ] do newvar="${item%%=*}" # get item name vars="$vars $newvar" # add name to collection item="${item#*;}" # remove readed line done for var in $vars; do unset $var done done IFS="$OLDIFS" } #==============================================================================# #= This function check package signing and returns back true or false # #= function check_package_signing() { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} [ $1 ] || { LOG_MSG_AND_EXIT "Wrong usage - ${FUNCNAME[0]}()"; } local package_path=$1 local checksum_unsigned_file="$package_path/$CHECKSUM_NAME" local checksum_signed_file="$package_path/$CHECKSUM_NAME.sig" local public_cert_file="$package_path/$PUBLIC_CERT_NAME" ### Check if unsigned checksum file exists [ ! -f "$checksum_unsigned_file" ] && LOG_MSG_AND_EXIT "Error: fail to find unsigned checksum file to verify package signing." ### Check if signed checksum file exists [ ! -f "$checksum_signed_file" ] && LOG_MSG_AND_EXIT "Error: fail to find sign checksum file to verify package signing." ### Check if public key exists [ ! -f "$public_cert_file" ] && LOG_MSG_AND_EXIT "Error: fail to find public certificate to verify package signing." LOG_MSG "public_cert_file: ${public_cert_file}" ${DEBUG_MSG} LOG_MSG "checksum_signed_file: ${checksum_signed_file}" ${DEBUG_MSG} LOG_MSG "checksum_unsigned_file: ${checksum_unsigned_file}" ${DEBUG_MSG} gpg --keyring "$public_cert_file" --verify "$checksum_signed_file" "$checksum_unsigned_file" > /dev/null 2>&1 [ $? -ne 0 ] && LOG_MSG_AND_EXIT "Error: fault package signing." LOG_MSG "cd into: ${package_path}" ${DEBUG_MSG} cd $package_path > /dev/null 2>&1 sha256sum -c $CHECKSUM_NAME > /dev/null 2>&1 [ $? -ne 0 ] && LOG_MSG_AND_EXIT "Error: fault package SHA signing, file has been compromised" LOG_MSG "backing back:" ${DEBUG_MSG} cd - > /dev/null 2>&1 LOG_MSG "exiting:" ${DEBUG_MSG} } #==============================================================================# #= This function prints supported SSD from package ini # #= function string_supported_model() { local section=$1 if [[ ! -z "${Vendor[*]}" ]] && [[ ! -z "${SSD_FW_Model[*]}" ]] && [[ ! -z "${SSD_FW_Version[*]}" ]] \ && [[ ! -z "${SSD_Size[*]}" ]] && [[ ! -z ${Shutdown_Policy[*]} ]]; then printf 'o %-10s | %-30s | %-12s | %-6sGB | %-7s |\n' \ "$( IFS=$'\n'; echo "${Vendor[@]}" )" "$( IFS=$'\n'; echo "${SSD_FW_Model[@]}" )" \ "${SSD_FW_Version[@]}" "${SSD_Size[@]}" "${Shutdown_Policy[@],,}" fi } #==============================================================================# #= This function extract SSD FW package into /tmp # #= function extract_package() { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} local filename=$1 LOG_MSG "filename:$filename" ${DEBUG_MSG} ### Check if file exists [ ! -f $filename ] && LOG_MSG_AND_EXIT "Error: given file ($filename) not found." ### Check if tmp available [ ! -d "/tmp" ] && LOG_MSG_AND_EXIT "Error: directory /tmp DOES NOT exists." local base_filename="${filename##*/}" local folder_name="/tmp/""${base_filename%%.*}" ### Check if full path available if [ -d $folder_name ]; then LOG_MSG "Path:$folder_name already exists, removing folder." ${DEBUG_MSG} rm -rf ${folder_name} [ $? -ne 0 ] && LOG_MSG_AND_EXIT "Error: folder:$folder_name is already in use and can't be overwrite, please remove it and retry." fi mkdir ${folder_name} && tar xf ${filename} -C ${folder_name} --strip-components 1 --warning=no-timestamp > /dev/null 2>&1 #tar -xf $filename --directory /tmp/ --warning=no-timestamp > /dev/null 2>&1 ### Check if untar succeed. [ $? -ne 0 ] && LOG_MSG_AND_EXIT "Error: fail to extract given package ($filename)." ### return the path file extraction is # local base_filename="${filename##*/}" # local folder_name="/tmp/""${base_filename%%.*}" eval $2="$folder_name" PKG_EXTRACTED=$TRUE check_package_signing $folder_name LOG_MSG "successfully untar file." ${DEBUG_MSG} } #==============================================================================# #= This function extract SSD FW package into /tmp # #= function erase_extract_package() { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} [[ "$PKG_EXTRACTED" == "$FALSE" ]] && return local folder_name=$1 LOG_MSG "folder_name: $folder_name" ${DEBUG_MSG} ### Check if folder exists if [ ! -d "$folder_name" ]; then LOG_MSG "Error: directory $folder_name DOES NOT exists." "$ERR_MSG" LOG_MSG "Exiting..." exit 1 fi rm -rf $folder_name ### Check if untar succeed. if [ $? -ne 0 ]; then LOG_MSG "Error: fail to delete $folder_name folder." "$ERR_MSG" LOG_MSG "Exiting..." exit 1 fi PKG_EXTRACTED=$FALSE LOG_MSG "successfully removed folder:$folder_name" ${DEBUG_MSG} } #==============================================================================# #= This function returns back ini section array. #= function call_ini_section() { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} local ini_section=$1 LOG_MSG "ini_section:$ini_section" ${DEBUG_MSG} [[ -z "$ini_section" ]] && LOG_MSG_AND_EXIT "Error: given INI section is null." [[ -z "$(declare -F "$INI_PREFIX$ini_section")" ]] && LOG_MSG_AND_EXIT "Error: $ini_section section is missing in INI file." eval "$(echo "$INI_PREFIX$ini_section")" # call given section function. } #==============================================================================# #= This function prints ssd info #= function print_ssd_info() { LOG_MSG "func: ${FUNCNAME[0]}()" ${DEBUG_MSG} local argument_count=$# if [ $argument_count -eq 2 ]; then local newer_fw_version=$1 local power_policy=$2 LOG_MSG "Device Model\t\t : $SSD_DEVICE_MODEL" LOG_MSG "Serial Number\t\t : $SSD_SERIAL" LOG_MSG "User Capacity\t\t : $SSD_SIZE GB" LOG_MSG "Current Firmware Version : $SSD_FW_VER" LOG_MSG "Available Firmware Version : $Newer_FW_Version" LOG_MSG "Power Cycle Required\t : $power_policy" LOG_MSG "Upgrade Required\t : yes" elif [ $argument_count -eq 1 ]; then local _upgrade_require=$1 LOG_MSG "Device Model\t : $SSD_DEVICE_MODEL" LOG_MSG "Serial Number\t : $SSD_SERIAL" LOG_MSG "User Capacity\t : $SSD_SIZE GB" LOG_MSG "Firmware Version : $SSD_FW_VER" LOG_MSG "Upgrade Required : $_upgrade_require" else LOG_MSG "Device Model\t : $SSD_DEVICE_MODEL" LOG_MSG "Serial Number\t : $SSD_SERIAL" LOG_MSG "User Capacity\t : $SSD_SIZE GB" LOG_MSG "Firmware Version : $SSD_FW_VER" fi } # Main # ------------------------------------------------------------------------------ init_script check_usage "$@" # show help if [ $ARG_HELP_FLAG == $TRUE ]; then usage exit 0 # show version elif [ $ARG_VERSION_FLAG == $TRUE ]; then echo $UTIL_TITLE exit 0 # show SSD info elif [ $ARG_QUERY_FLAG == $TRUE ]; then match_found=$FALSE check_tool_dependencies get_ssd_info if [ $ARG_IMAGE_FLAG == $TRUE ]; then extract_package $ARG_IMAGE_VAL extraction_path ini_parser "$extraction_path/list.ini" for section in $SECTIONS; do if [[ $section != "main" ]]; then call_ini_section $section if [[ "$SSD_DEVICE_MODEL" == "$( IFS=$'\n'; echo "${SSD_FW_Model[@]}" )" ]] && \ [[ "$SSD_FW_VER" == "${SSD_FW_Version[@]}" ]] && \ [[ "$SSD_SIZE" == "${SSD_Size[@]}" ]]; then match_found=$TRUE break fi ini_unset $section fi done erase_extract_package "$extraction_path" if [[ "$match_found" == "$FALSE" ]]; then #LOG_MSG "SSD FW upgrade not require, based on given package latest version is in used." print_ssd_info "no" echo -e "" exit 0 fi fi if [[ "$match_found" == "$TRUE" ]]; then print_ssd_info $Newer_FW_Version ${Shutdown_Policy[0],,} erase_extract_package "$extraction_path" else print_ssd_info fi echo -e "" exit 0 # show package version elif [ $ARG_PACKAGE_INFO_FLAG == $TRUE ]; then check_tool_dependencies extract_package $ARG_IMAGE_VAL extraction_path # 2. check signing ini_parser "$extraction_path/list.ini" call_ini_section "main" LOG_MSG "Package Name: $ARG_IMAGE_VAL" [[ ! -z ${description[@]} ]] && LOG_MSG "Description: ${description[@]}" [[ ! -z ${version[@]} ]] && LOG_MSG "Version: ${version[@]}" [[ ! -z ${release_date[@]} ]] && LOG_MSG "Release Date: ${release_date[@]}" LOG_MSG "Supported SSDs:" LOG_MSG " Vendor | Model | FW ver | Size | Pwr Cyc Req |" LOG_MSG "=============|================================|==============|==========|=============|" for section in $SECTIONS; do if [[ "$section" != "main" ]]; then call_ini_section $section supported_model=$(string_supported_model $section) LOG_MSG "$supported_model" ini_unset $section fi done echo -e "" erase_extract_package "$extraction_path" exit 0 # operate SSD fw update elif [ $ARG_UPDATE_FLAG == $TRUE ]; then check_tool_dependencies get_ssd_info extract_package $ARG_IMAGE_VAL extraction_path # 2. check signing UPDATE_DONE=$FALSE ini_parser "$extraction_path/list.ini" for section in $SECTIONS; do if [[ $section != "main" ]]; then call_ini_section $section if [[ "$SSD_DEVICE_MODEL" == "$( IFS=$'\n'; echo "${SSD_FW_Model[@]}" )" ]] && \ [[ "$SSD_FW_VER" == "${SSD_FW_Version[@]}" ]] && \ [[ "$SSD_SIZE" == "${SSD_Size[@]}" ]]; then UPDATE_DONE=$TRUE power_policy=${Shutdown_Policy[0],,} LOG_MSG "Power policy:$power_policy" ${DEBUG_MSG} print_ssd_info $Newer_FW_Version ${Shutdown_Policy[0],,} echo -e "" #[[ "yes" == "$power_policy" ]] && LOG_MSG "PLEASE NOTE: System will power-cycle automatically once SSD FW Update complete!" [[ "yes" == "$power_policy" || "$ARG_POWER_CYCLE_FLAG" == "$TRUE" ]] && LOG_MSG "Please note: Once SSD FW Update process ends, system will power-cycle automaticly and it will take up to 1 minute to access it back." # Prompt approval for FW update if ignore in case "yes" flag is on. if [[ "$ARG_YES_FLAG" == "$FALSE" ]]; then read -p "Do you want to continue? [Y/N]" -n 1 -r echo # (optional) move to a new line if [[ ! $REPLY =~ ^[Yy]$ ]]; then LOG_MSG_AND_EXIT "Aborting..." exit 0 fi fi # Check FWUpgrade scripts exists & if so call it. ssd_script_name=$Update_Script ssd_script_path="${extraction_path}/${section}/${ssd_script_name}" LOG_MSG "ssd_script_path: $ssd_script_path" ${DEBUG_MSG} if [ ! -f $ssd_script_path ]; then LOG_MSG_AND_EXIT "Error: fail to call upgrade script ($ssd_script_path)!" fi ( cd "${extraction_path}/${section}" > /dev/null 2>&1 || exit /bin/bash "$ssd_script_path" "${extraction_path}/${section}" #cd - > /dev/null 2>&1 || exit ) if [ $? -ne 0 ]; then LOG_MSG_AND_EXIT "Error: SSD FW update failed." else LOG_MSG "SSD FW update completed successfully." if [ $ARG_POWER_CYCLE_FLAG == $TRUE ]; then LOG_MSG "Execute power cycle..." sleep 1 sync power_cycle_script="${extraction_path}/common/mlnx_shutdown.sh" [ ! -f $power_cycle_script ]&& LOG_MSG_AND_EXIT "Error: failed to initiate power cycle." ($power_cycle_script "-s") [ $? -ne 0 ] && LOG_MSG_AND_EXIT "Error: failed to power cycle the system automatically." erase_extract_package "$extraction_path" fi fi break # Exit the for loop fi ini_unset $section fi done if [ $UPDATE_DONE == $FALSE ]; then LOG_MSG "SSD FW upgrade not require, based on given package latest version is in used." print_ssd_info "no" fi echo -e "" erase_extract_package "$extraction_path" exit 0 fi exit 0