# sfputil.py
#
# Platform-specific SFP transceiver interface for SONiC
#

try:
    import time
    from sonic_sfp.sfputilbase import SfpUtilBase
except ImportError as e:
    raise ImportError("%s - required module not found" % str(e))


class SfpUtil(SfpUtilBase):
    """Platform-specific SfpUtil class"""

    PORT_START = 0
    PORT_END = 63 
    PORTS_IN_BLOCK = 64

    EEPROM_OFFSET = 29

    _port_to_eeprom_mapping = {}

    _logic_to_phy_port_mapping = {
           0: 0,
           1: 1,
           2: 4,
           3: 5,
           4: 8,
           5: 9,
           6: 12,
           7: 13,
           8: 16,
           9: 17,
           10: 20,
           11: 21,
           12: 24,
           13: 25,
           14: 28,
           15: 29,
           16: 32,
           17: 33,
           18: 36,
           19: 37,
           20: 40,
           21: 41,
           22: 44,
           23: 45,
           24: 48,
           25: 49,
           26: 52,
           27: 53,
           28: 56,
           29: 57,
           30: 60,
           31: 61,
           32: 2,
           33: 3,
           34: 6,
           35: 7,
           36: 10,
           37: 11,
           38: 14,
           39: 15,
           40: 18,
           41: 19,
           42: 22,
           43: 23,
           44: 26,
           45: 27,
           46: 30,
           47: 31,
           48: 34,
           49: 35,
           50: 38,
           51: 39,
           52: 42,
           53: 43,
           54: 46,
           55: 47,
           56: 50,
           57: 51,
           58: 54,
           59: 55,
           60: 58,
           61: 59,
           62: 62,
           63: 63
    }

    @property
    def port_start(self):
        return self.PORT_START

    @property
    def port_end(self):
        return self.PORT_END

    @property
    def qsfp_ports(self):
        return range(0, self.PORTS_IN_BLOCK + 1)

    @property
    def port_to_eeprom_mapping(self):
        return self._port_to_eeprom_mapping

    def __init__(self):
        eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom"

        for x in range(0, self.port_end + 1):
            phy_port = self._logic_to_phy_port_mapping[x]
            self._port_to_eeprom_mapping[x] = eeprom_path.format(phy_port + self.EEPROM_OFFSET)

        SfpUtilBase.__init__(self)

    def get_presence(self, port_num):
        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

    # logic port to physical port mapping
        port_num = self._logic_to_phy_port_mapping[port_num]

        try:
            reg_file = open("/sys/devices/platform/ingrasys-s9200-cpld.0/qsfp_modprs")
        except IOError as e:
            print "Error: unable to open file: %s" % str(e)
            return False

        content = reg_file.readline().rstrip()

        # content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Mask off the bit corresponding to our port
        mask = (1 << port_num)

        # ModPrsL is active low
        if reg_value & mask == 0:
            return True

        return False

    def get_low_power_mode(self, port_num):
        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

    # logic port to physical port mapping
        port_num = self._logic_to_phy_port_mapping[port_num]

        try:
            reg_file = open("/sys/devices/platform/ingrasys-s9200-cpld.0/qsfp_lpmode")
        except IOError as e:
            print "Error: unable to open file: %s" % str(e)

        content = reg_file.readline().rstrip()

        # content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Mask off the bit corresponding to our port
        mask = (1 << port_num)

        # LPMode is active high
        if reg_value & mask == 0:
            return False

        return True

    def set_low_power_mode(self, port_num, lpmode):
        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

    # logic port to physical port mapping
        port_num = self._logic_to_phy_port_mapping[port_num]
    
        try:
            reg_file = open("/sys/devices/platform/ingrasys-s9200-cpld.0/qsfp_lpmode", "r+")
        except IOError as e:
            print "Error: unable to open file: %s" % str(e)
            return False

        content = reg_file.readline().rstrip()
    

        # content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Mask off the bit corresponding to our port
        mask = (1 << port_num)

        # LPMode is active high; set or clear the bit accordingly
        if lpmode is True:
            reg_value = reg_value | mask
        else:
            reg_value = reg_value & ~mask

        # Convert our register value back to a hex string and write back
        content = format(reg_value, 'x')

        reg_file.seek(0)
        reg_file.write(content)
        reg_file.close()

        return True

    def reset(self, port_num):
        QSFP_RESET_REGISTER_DEVICE_FILE = "/sys/devices/platform/ingrasys-s9200-cpld.0/qsfp_reset"

        # Check for invalid port_num
        if port_num < self.port_start or port_num > self.port_end:
            return False

    # logic port to physical port mapping
        port_num = self._logic_to_phy_port_mapping[port_num]

        try:
            reg_file = open(QSFP_RESET_REGISTER_DEVICE_FILE, "r+")
        except IOError as e:
            print "Error: unable to open file: %s" % str(e)
            return False

        content = reg_file.readline().rstrip()

        # File content is a string containing the hex representation of the register
        reg_value = int(content, 16)

        # Mask off the bit corresponding to our port
        mask = (1 << port_num)

        # ResetL is active low
        reg_value = reg_value & ~mask

        # Convert our register value back to a hex string and write back
        content = format(reg_value, 'x')

        reg_file.seek(0)
        reg_file.write(content)
        reg_file.close()

        # Sleep 1 second to allow it to settle
        time.sleep(1)

        # Flip the bit back high and write back to the register to take port out of reset
        try:
            reg_file = open(QSFP_RESET_REGISTER_DEVICE_FILE, "w")
        except IOError as e:
            print "Error: unable to open file: %s" % str(e)
            return False

        reg_value = reg_value | mask
        content = format(reg_value, 'x')

        reg_file.seek(0)
        reg_file.write(content)
        reg_file.close()

        return True

    def get_transceiver_change_event(self):
        """
        TODO: This function need to be implemented
        when decide to support monitoring SFP(Xcvrd)
        on this platform.
        """
        raise NotImplementedError