#!/bin/bash

debug_flag=0

fan_val=0
temp_val=0
ctrl_mode_val=0
fan_pwm_val=0
fan_rpm_val=0
init_threshold=0

byte_hex_test()
{
	if ! [[ $1  =~ ^[0-9A-Fa-f]{2}$ ]] ; then
		return 0
	else
		return 1
	fi
}


bmc_sensor_read()
{
	temp_val=$(ipmitool raw 0x30 0x88 2>>/dev/null)
	if [ $? -ne 0 ];then
		return 1
	fi

	fan_val=$(ipmitool raw 0x30 0x22 2>>/dev/null)
	if [ $? -ne 0 ];then
		return 1
	fi

	return 0
}

#$1=get(0)/set(1), $2=ctrl_mode(1:manual, 0:auto)
#get rtn: ctrl_mode_val, fan_pwm_val
bmc_fan_speed_ctrl()
{
	if [ -e /sys/bus/i2c/devices/0-0044/pwm ];then
		if [ $1 -eq 1 ];then
			#Set Fan Speed Control
			if [ $2 -eq 0 ];then
				ipmitool raw 0x30 0x21 0x0 0x0 1>/dev/null 2>/dev/null
			else
				fan_pwm_input=$(cat /sys/bus/i2c/devices/0-0044/pwm | awk '{printf $1}')
				fan_pwm_input=$( printf "%d" 0x$fan_pwm_input )
				ipmitool raw 0x30 0x21 0x1 $fan_pwm_input 1>/dev/null 2>/dev/null
			fi
		else
			#Get Fan Speed Control
			ctrl_mode_val=$(echo $fan_val | awk '{printf $1}')
			fan_pwm_val=$(echo $fan_val | awk '{printf $2}')
			byte_hex_test $ctrl_mode_val
			if [ $? -eq 0 ]; then
				return
			fi
			byte_hex_test $fan_pwm_val
			if [ $? -eq 0 ]; then
				return
			fi
			ctrl_mode_val=$( printf "%d" 0x$ctrl_mode_val )
			fan_pwm_val=$( printf "%d" 0x$fan_pwm_val )
			echo $fan_pwm_val > /sys/bus/i2c/devices/0-0044/pwm
		fi
	fi
}

bmc_fan_presence()
{
	if [ -e /sys/bus/i2c/devices/0-0044/fan1_present ];then
		for i in $(seq 0 6);
		do
			p=$((31+i))
			fan_pre_val=$(echo $fan_val | awk '{print $'"$p"'}')
			byte_hex_test $fan_pre_val
			if [ $? -eq 0 ]; then
				return
			fi
			fan_pre_val=$( printf "%d" 0x$fan_pre_val )
			echo $fan_pre_val > /sys/bus/i2c/devices/0-0044/fan$((i+1))_present
		done
	fi
}

bmc_fan_speed_rpm()
{
	if [ -e /sys/bus/i2c/devices/0-0044/fan1_input ];then
		for i in $(seq 0 6);
		do
			p1=$((3+i*2))
			p2=$((4+i*2))
			p3=$((17+i*2))
			p4=$((18+i*2))

			#front
			hi_byte=$(echo $fan_val | awk '{print $'"$p1"'}')
			lo_byte=$(echo $fan_val | awk '{print $'"$p2"'}')
			byte_hex_test $hi_byte
			if [ $? -eq 0 ]; then
				return
			fi
			byte_hex_test $lo_byte
			if [ $? -eq 0 ]; then
				return
			fi
			hi_byte=$( printf "%d" 0x$hi_byte )
			lo_byte=$( printf "%d" 0x$lo_byte )
			fan_rpm_val=$((hi_byte<<8))
			fan_rpm_val=`expr $fan_rpm_val + $lo_byte`
			echo $fan_rpm_val > /sys/bus/i2c/devices/0-0044/fan$((i+1))_input

			#rear
			hi_byte=$(echo $fan_val | awk '{print $'"$p3"'}')
			lo_byte=$(echo $fan_val | awk '{print $'"$p4"'}')
			byte_hex_test $hi_byte
			if [ $? -eq 0 ]; then
				return
			fi
			byte_hex_test $lo_byte
			if [ $? -eq 0 ]; then
				return
			fi
			hi_byte=$( printf "%d" 0x$hi_byte )
			lo_byte=$( printf "%d" 0x$lo_byte )
			fan_rpm_val=$((hi_byte<<8))
			fan_rpm_val=`expr $fan_rpm_val + $lo_byte`
			echo $fan_rpm_val > /sys/bus/i2c/devices/0-0044/fan$((i+8))_input
		done
	fi
}

do_fan_update()
{
	#fan presence
	bmc_fan_presence

	#fan speed rpm
	bmc_fan_speed_rpm

	if [ $debug_flag -eq 0 ];then
		#Get Fan RPM
		bmc_fan_speed_ctrl 0
	else
		bmc_fan_speed_ctrl 1 1
	fi
}

do_thermal_update()
{
	if [ -e /sys/bus/i2c/devices/0-004f/temp1_input ];then

		local check_val=0
		#command return check
		for i in $(seq 8 7 57); do
			thermal_val=$(echo $temp_val | awk '{print $'"$i"'}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			check_val=$((check_val + thermal_val))
			if [ $check_val -gt 0 ]; then
				break
			fi
		done

		if [ $check_val -eq 0 ]; then
			return
		fi

		#mcp3425
		thermal_val=$(echo $temp_val | awk '{printf $8}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		echo $thermal_val > /sys/bus/i2c/devices/0-0068/temp1_input

		thermal_val=$(echo $temp_val | awk '{printf $15}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		echo $thermal_val > /sys/bus/i2c/devices/0-004a/temp1_input

		thermal_val=$(echo $temp_val | awk '{printf $22}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		echo $thermal_val > /sys/bus/i2c/devices/0-0049/temp1_input

		thermal_val=$(echo $temp_val | awk '{printf $29}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		echo $thermal_val > /sys/bus/i2c/devices/0-004b/temp1_input

		thermal_val=$(echo $temp_val | awk '{printf $36}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		echo $thermal_val > /sys/bus/i2c/devices/0-004c/temp1_input

		thermal_val=$(echo $temp_val | awk '{printf $43}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		echo $thermal_val > /sys/bus/i2c/devices/0-004f/temp1_input

		thermal_val=$(echo $temp_val | awk '{printf $50}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		echo $thermal_val > /sys/bus/i2c/devices/0-0048/temp1_input

		thermal_val=$(echo $temp_val | awk '{printf $57}')
		byte_hex_test $thermal_val
		if [ $? -eq 0 ]; then
			return
		fi
		thermal_val=$( printf "%d" 0x$thermal_val )
		thermal_val=`expr $thermal_val \* 1000`
		# fan tmp75 should be 0x49, but conflict
		echo $thermal_val > /sys/bus/i2c/devices/0-004d/temp1_input
	fi
}

do_thermal_threshold_init()
{
	if [ $init_threshold -eq 0 ]; then
		if [ -e /sys/bus/i2c/devices/0-004f/temp1_max ];then
			#mcp3425
			thermal_val=$(echo $temp_val | awk '{printf $13}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-0068/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $14}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-0068/temp1_crit

			thermal_val=$(echo $temp_val | awk '{printf $20}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004a/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $21}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004a/temp1_crit

			thermal_val=$(echo $temp_val | awk '{printf $27}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-0049/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $28}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-0049/temp1_crit

			thermal_val=$(echo $temp_val | awk '{printf $34}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004b/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $35}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004b/temp1_crit

			thermal_val=$(echo $temp_val | awk '{printf $41}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004c/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $42}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004c/temp1_crit

			thermal_val=$(echo $temp_val | awk '{printf $48}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004f/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $49}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004f/temp1_crit

			thermal_val=$(echo $temp_val | awk '{printf $55}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-0048/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $56}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-0048/temp1_crit

			thermal_val=$(echo $temp_val | awk '{printf $62}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004d/temp1_max
			thermal_val=$(echo $temp_val | awk '{printf $63}')
			byte_hex_test $thermal_val
			if [ $? -eq 0 ]; then
				return
			fi
			thermal_val=$( printf "%d" 0x$thermal_val )
			thermal_val=`expr $thermal_val \* 1000`
			echo $thermal_val > /sys/bus/i2c/devices/0-004d/temp1_crit

			init_threshold=1
		fi
	fi
}

FAN_Thermal_monitor()
{
	if [ $debug_flag -eq 1 ];then
		fan_pwm_input=100
		echo $fan_pwm_input > /sys/bus/i2c/devices/0-0044/pwm
	fi

	while true
	do
		#get bmc sensor value
		bmc_sensor_read
		if [ $? -eq 0 ];then
			do_fan_update
			do_thermal_update
			do_thermal_threshold_init
		fi

		sleep 1
	done
}

FAN_Thermal_monitor