/* * csu550.c - A driver for pmbus * * Copyright (c) 2010, 2011 Ericsson AB. * Copyright (c) 2019 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include #include "pmbus.h" /* * Find sensor groups and status registers on each page. */ static void pmbus_find_sensor_groups(struct i2c_client *client, struct pmbus_driver_info *info) { int page; /* Sensors detected on page 0 only */ if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN)) info->func[0] |= PMBUS_HAVE_VIN; if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN)) info->func[0] |= PMBUS_HAVE_IIN; if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN)) info->func[0] |= PMBUS_HAVE_PIN; if (info->func[0] && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) info->func[0] |= PMBUS_HAVE_STATUS_INPUT; if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { info->func[0] |= PMBUS_HAVE_FAN12; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) info->func[0] |= PMBUS_HAVE_STATUS_FAN12; } if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) info->func[0] |= PMBUS_HAVE_TEMP; if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) info->func[0] |= PMBUS_HAVE_TEMP2; if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) info->func[0] |= PMBUS_HAVE_TEMP3; if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3) && pmbus_check_byte_register(client, 0, PMBUS_STATUS_TEMPERATURE)) info->func[0] |= PMBUS_HAVE_STATUS_TEMP; /* Sensors detected on all pages */ for (page = 0; page < info->pages; page++) { if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) { info->func[page] |= PMBUS_HAVE_VOUT; if (pmbus_check_byte_register(client, page, PMBUS_STATUS_VOUT)) info->func[page] |= PMBUS_HAVE_STATUS_VOUT; } if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) { info->func[page] |= PMBUS_HAVE_IOUT; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_IOUT)) info->func[page] |= PMBUS_HAVE_STATUS_IOUT; } if (pmbus_check_word_register(client, page, PMBUS_READ_POUT)) info->func[page] |= PMBUS_HAVE_POUT; } } /* * Identify chip parameters. */ static int pmbus_identify(struct i2c_client *client, struct pmbus_driver_info *info) { int ret = 0; if (!info->pages) { /* * Check if the PAGE command is supported. If it is, * keep setting the page number until it fails or until the * maximum number of pages has been reached. Assume that * this is the number of pages supported by the chip. */ if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) { int page; for (page = 1; page < PMBUS_PAGES; page++) { if (pmbus_set_page(client, page) < 0) break; } pmbus_set_page(client, 0); info->pages = page; } else { info->pages = 1; } } if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) { int vout_mode; vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); if (vout_mode >= 0 && vout_mode != 0xff) { switch (vout_mode >> 5) { case 0: break; case 1: info->format[PSC_VOLTAGE_OUT] = vid; break; case 2: info->format[PSC_VOLTAGE_OUT] = direct; break; default: ret = -ENODEV; goto abort; } } } /* * We should check if the COEFFICIENTS register is supported. * If it is, and the chip is configured for direct mode, we can read * the coefficients from the chip, one set per group of sensor * registers. * * To do this, we will need access to a chip which actually supports the * COEFFICIENTS command, since the command is too complex to implement * without testing it. Until then, abort if a chip configured for direct * mode was detected. */ if (info->format[PSC_VOLTAGE_OUT] == direct) { ret = -ENODEV; goto abort; } /* Try to find sensor groups */ pmbus_find_sensor_groups(client, info); abort: return ret; } static int pmbus_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pmbus_driver_info *info; struct pmbus_platform_data *pdata = NULL; struct device *dev = &client->dev; info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), GFP_KERNEL); if (!info) return -ENOMEM; if (!strncmp(id->name, "dps460", sizeof("dps460")) || !strncmp(id->name, "fsp1200", sizeof("fsp1200")) || !strncmp(id->name, "dps550", sizeof("dps550"))) { pdata = kzalloc(sizeof(struct pmbus_platform_data), GFP_KERNEL); if (!pdata) { kfree(info); return -ENOMEM; } pdata->flags = PMBUS_SKIP_STATUS_CHECK; } info->pages = id->driver_data; info->identify = pmbus_identify; dev->platform_data = pdata; return pmbus_do_probe(client, id, info); } static const struct i2c_device_id pmbus_id[] = { {"csu550", 0}, {"csu800", 1}, {"fsp1200", 1}, {"dps550", 1}, {} }; MODULE_DEVICE_TABLE(i2c, pmbus_id); /* This is the driver that will be inserted */ static struct i2c_driver pmbus_driver = { .probe = pmbus_probe, .remove = pmbus_do_remove, .id_table = pmbus_id, .driver = { .name = "pmbus", }, }; module_i2c_driver(pmbus_driver); MODULE_AUTHOR("sonic_rd "); MODULE_DESCRIPTION("ruijie psupmbus driver"); MODULE_LICENSE("GPL");