/* * pmbus.h - Common defines and structures for PMBus devices * * Copyright (c) 2010, 2011 Ericsson AB. * Copyright (c) 2012 Guenter Roeck * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef PMBUS_H #define PMBUS_H #include #include /* * Registers */ enum pmbus_regs { PMBUS_PAGE = 0x00, PMBUS_OPERATION = 0x01, PMBUS_ON_OFF_CONFIG = 0x02, PMBUS_CLEAR_FAULTS = 0x03, PMBUS_PHASE = 0x04, PMBUS_CAPABILITY = 0x19, PMBUS_QUERY = 0x1A, PMBUS_VOUT_MODE = 0x20, PMBUS_VOUT_COMMAND = 0x21, PMBUS_VOUT_TRIM = 0x22, PMBUS_VOUT_CAL_OFFSET = 0x23, PMBUS_VOUT_MAX = 0x24, PMBUS_VOUT_MARGIN_HIGH = 0x25, PMBUS_VOUT_MARGIN_LOW = 0x26, PMBUS_VOUT_TRANSITION_RATE = 0x27, PMBUS_VOUT_DROOP = 0x28, PMBUS_VOUT_SCALE_LOOP = 0x29, PMBUS_VOUT_SCALE_MONITOR = 0x2A, PMBUS_COEFFICIENTS = 0x30, PMBUS_POUT_MAX = 0x31, PMBUS_FAN_CONFIG_12 = 0x3A, PMBUS_FAN_COMMAND_1 = 0x3B, PMBUS_FAN_COMMAND_2 = 0x3C, PMBUS_FAN_CONFIG_34 = 0x3D, PMBUS_FAN_COMMAND_3 = 0x3E, PMBUS_FAN_COMMAND_4 = 0x3F, PMBUS_VOUT_OV_FAULT_LIMIT = 0x40, PMBUS_VOUT_OV_FAULT_RESPONSE = 0x41, PMBUS_VOUT_OV_WARN_LIMIT = 0x42, PMBUS_VOUT_UV_WARN_LIMIT = 0x43, PMBUS_VOUT_UV_FAULT_LIMIT = 0x44, PMBUS_VOUT_UV_FAULT_RESPONSE = 0x45, PMBUS_IOUT_OC_FAULT_LIMIT = 0x46, PMBUS_IOUT_OC_FAULT_RESPONSE = 0x47, PMBUS_IOUT_OC_LV_FAULT_LIMIT = 0x48, PMBUS_IOUT_OC_LV_FAULT_RESPONSE = 0x49, PMBUS_IOUT_OC_WARN_LIMIT = 0x4A, PMBUS_IOUT_UC_FAULT_LIMIT = 0x4B, PMBUS_IOUT_UC_FAULT_RESPONSE = 0x4C, PMBUS_OT_FAULT_LIMIT = 0x4F, PMBUS_OT_FAULT_RESPONSE = 0x50, PMBUS_OT_WARN_LIMIT = 0x51, PMBUS_UT_WARN_LIMIT = 0x52, PMBUS_UT_FAULT_LIMIT = 0x53, PMBUS_UT_FAULT_RESPONSE = 0x54, PMBUS_VIN_OV_FAULT_LIMIT = 0x55, PMBUS_VIN_OV_FAULT_RESPONSE = 0x56, PMBUS_VIN_OV_WARN_LIMIT = 0x57, PMBUS_VIN_UV_WARN_LIMIT = 0x58, PMBUS_VIN_UV_FAULT_LIMIT = 0x59, PMBUS_IIN_OC_FAULT_LIMIT = 0x5B, PMBUS_IIN_OC_WARN_LIMIT = 0x5D, PMBUS_POUT_OP_FAULT_LIMIT = 0x68, PMBUS_POUT_OP_WARN_LIMIT = 0x6A, PMBUS_PIN_OP_WARN_LIMIT = 0x6B, PMBUS_STATUS_BYTE = 0x78, PMBUS_STATUS_WORD = 0x79, PMBUS_STATUS_VOUT = 0x7A, PMBUS_STATUS_IOUT = 0x7B, PMBUS_STATUS_INPUT = 0x7C, PMBUS_STATUS_TEMPERATURE = 0x7D, PMBUS_STATUS_CML = 0x7E, PMBUS_STATUS_OTHER = 0x7F, PMBUS_STATUS_MFR_SPECIFIC = 0x80, PMBUS_STATUS_FAN_12 = 0x81, PMBUS_STATUS_FAN_34 = 0x82, PMBUS_READ_VIN = 0x88, PMBUS_READ_IIN = 0x89, PMBUS_READ_VCAP = 0x8A, PMBUS_READ_VOUT = 0x8B, PMBUS_READ_IOUT = 0x8C, PMBUS_READ_TEMPERATURE_1 = 0x8D, PMBUS_READ_TEMPERATURE_2 = 0x8E, PMBUS_READ_TEMPERATURE_3 = 0x8F, PMBUS_READ_FAN_SPEED_1 = 0x90, PMBUS_READ_FAN_SPEED_2 = 0x91, PMBUS_READ_FAN_SPEED_3 = 0x92, PMBUS_READ_FAN_SPEED_4 = 0x93, PMBUS_READ_DUTY_CYCLE = 0x94, PMBUS_READ_FREQUENCY = 0x95, PMBUS_READ_POUT = 0x96, PMBUS_READ_PIN = 0x97, PMBUS_REVISION = 0x98, PMBUS_MFR_ID = 0x99, PMBUS_MFR_MODEL = 0x9A, PMBUS_MFR_REVISION = 0x9B, PMBUS_MFR_LOCATION = 0x9C, PMBUS_MFR_DATE = 0x9D, PMBUS_MFR_SERIAL = 0x9E, /* * Virtual registers. * Useful to support attributes which are not supported by standard PMBus * registers but exist as manufacturer specific registers on individual chips. * Must be mapped to real registers in device specific code. * * Semantics: * Virtual registers are all word size. * READ registers are read-only; writes are either ignored or return an error. * RESET registers are read/write. Reading reset registers returns zero * (used for detection), writing any value causes the associated history to be * reset. * Virtual registers have to be handled in device specific driver code. Chip * driver code returns non-negative register values if a virtual register is * supported, or a negative error code if not. The chip driver may return * -ENODATA or any other error code in this case, though an error code other * than -ENODATA is handled more efficiently and thus preferred. Either case, * the calling PMBus core code will abort if the chip driver returns an error * code when reading or writing virtual registers. */ PMBUS_VIRT_BASE = 0x100, PMBUS_VIRT_READ_TEMP_AVG, PMBUS_VIRT_READ_TEMP_MIN, PMBUS_VIRT_READ_TEMP_MAX, PMBUS_VIRT_RESET_TEMP_HISTORY, PMBUS_VIRT_READ_VIN_AVG, PMBUS_VIRT_READ_VIN_MIN, PMBUS_VIRT_READ_VIN_MAX, PMBUS_VIRT_RESET_VIN_HISTORY, PMBUS_VIRT_READ_IIN_AVG, PMBUS_VIRT_READ_IIN_MIN, PMBUS_VIRT_READ_IIN_MAX, PMBUS_VIRT_RESET_IIN_HISTORY, PMBUS_VIRT_READ_PIN_AVG, PMBUS_VIRT_READ_PIN_MIN, PMBUS_VIRT_READ_PIN_MAX, PMBUS_VIRT_RESET_PIN_HISTORY, PMBUS_VIRT_READ_POUT_AVG, PMBUS_VIRT_READ_POUT_MIN, PMBUS_VIRT_READ_POUT_MAX, PMBUS_VIRT_RESET_POUT_HISTORY, PMBUS_VIRT_READ_VOUT_AVG, PMBUS_VIRT_READ_VOUT_MIN, PMBUS_VIRT_READ_VOUT_MAX, PMBUS_VIRT_RESET_VOUT_HISTORY, PMBUS_VIRT_READ_IOUT_AVG, PMBUS_VIRT_READ_IOUT_MIN, PMBUS_VIRT_READ_IOUT_MAX, PMBUS_VIRT_RESET_IOUT_HISTORY, PMBUS_VIRT_READ_TEMP2_AVG, PMBUS_VIRT_READ_TEMP2_MIN, PMBUS_VIRT_READ_TEMP2_MAX, PMBUS_VIRT_RESET_TEMP2_HISTORY, PMBUS_VIRT_READ_VMON, PMBUS_VIRT_VMON_UV_WARN_LIMIT, PMBUS_VIRT_VMON_OV_WARN_LIMIT, PMBUS_VIRT_VMON_UV_FAULT_LIMIT, PMBUS_VIRT_VMON_OV_FAULT_LIMIT, PMBUS_VIRT_STATUS_VMON, }; /* * OPERATION */ #define PB_OPERATION_CONTROL_ON BIT(7) /* * CAPABILITY */ #define PB_CAPABILITY_SMBALERT BIT(4) #define PB_CAPABILITY_ERROR_CHECK BIT(7) /* * VOUT_MODE */ #define PB_VOUT_MODE_MODE_MASK 0xe0 #define PB_VOUT_MODE_PARAM_MASK 0x1f #define PB_VOUT_MODE_LINEAR 0x00 #define PB_VOUT_MODE_VID 0x20 #define PB_VOUT_MODE_DIRECT 0x40 /* * Fan configuration */ #define PB_FAN_2_PULSE_MASK (BIT(0) | BIT(1)) #define PB_FAN_2_RPM BIT(2) #define PB_FAN_2_INSTALLED BIT(3) #define PB_FAN_1_PULSE_MASK (BIT(4) | BIT(5)) #define PB_FAN_1_RPM BIT(6) #define PB_FAN_1_INSTALLED BIT(7) /* * STATUS_BYTE, STATUS_WORD (lower) */ #define PB_STATUS_NONE_ABOVE BIT(0) #define PB_STATUS_CML BIT(1) #define PB_STATUS_TEMPERATURE BIT(2) #define PB_STATUS_VIN_UV BIT(3) #define PB_STATUS_IOUT_OC BIT(4) #define PB_STATUS_VOUT_OV BIT(5) #define PB_STATUS_OFF BIT(6) #define PB_STATUS_BUSY BIT(7) /* * STATUS_WORD (upper) */ #define PB_STATUS_UNKNOWN BIT(8) #define PB_STATUS_OTHER BIT(9) #define PB_STATUS_FANS BIT(10) #define PB_STATUS_POWER_GOOD_N BIT(11) #define PB_STATUS_WORD_MFR BIT(12) #define PB_STATUS_INPUT BIT(13) #define PB_STATUS_IOUT_POUT BIT(14) #define PB_STATUS_VOUT BIT(15) /* * STATUS_IOUT */ #define PB_POUT_OP_WARNING BIT(0) #define PB_POUT_OP_FAULT BIT(1) #define PB_POWER_LIMITING BIT(2) #define PB_CURRENT_SHARE_FAULT BIT(3) #define PB_IOUT_UC_FAULT BIT(4) #define PB_IOUT_OC_WARNING BIT(5) #define PB_IOUT_OC_LV_FAULT BIT(6) #define PB_IOUT_OC_FAULT BIT(7) /* * STATUS_VOUT, STATUS_INPUT */ #define PB_VOLTAGE_UV_FAULT BIT(4) #define PB_VOLTAGE_UV_WARNING BIT(5) #define PB_VOLTAGE_OV_WARNING BIT(6) #define PB_VOLTAGE_OV_FAULT BIT(7) /* * STATUS_INPUT */ #define PB_PIN_OP_WARNING BIT(0) #define PB_IIN_OC_WARNING BIT(1) #define PB_IIN_OC_FAULT BIT(2) /* * STATUS_TEMPERATURE */ #define PB_TEMP_UT_FAULT BIT(4) #define PB_TEMP_UT_WARNING BIT(5) #define PB_TEMP_OT_WARNING BIT(6) #define PB_TEMP_OT_FAULT BIT(7) /* * STATUS_FAN */ #define PB_FAN_AIRFLOW_WARNING BIT(0) #define PB_FAN_AIRFLOW_FAULT BIT(1) #define PB_FAN_FAN2_SPEED_OVERRIDE BIT(2) #define PB_FAN_FAN1_SPEED_OVERRIDE BIT(3) #define PB_FAN_FAN2_WARNING BIT(4) #define PB_FAN_FAN1_WARNING BIT(5) #define PB_FAN_FAN2_FAULT BIT(6) #define PB_FAN_FAN1_FAULT BIT(7) /* * CML_FAULT_STATUS */ #define PB_CML_FAULT_OTHER_MEM_LOGIC BIT(0) #define PB_CML_FAULT_OTHER_COMM BIT(1) #define PB_CML_FAULT_PROCESSOR BIT(3) #define PB_CML_FAULT_MEMORY BIT(4) #define PB_CML_FAULT_PACKET_ERROR BIT(5) #define PB_CML_FAULT_INVALID_DATA BIT(6) #define PB_CML_FAULT_INVALID_COMMAND BIT(7) enum pmbus_sensor_classes { PSC_VOLTAGE_IN = 0, PSC_VOLTAGE_OUT, PSC_CURRENT_IN, PSC_CURRENT_OUT, PSC_POWER, PSC_TEMPERATURE, PSC_FAN, PSC_NUM_CLASSES /* Number of power sensor classes */ }; #define PMBUS_PAGES 32 /* Per PMBus specification */ /* Functionality bit mask */ #define PMBUS_HAVE_VIN BIT(0) #define PMBUS_HAVE_VCAP BIT(1) #define PMBUS_HAVE_VOUT BIT(2) #define PMBUS_HAVE_IIN BIT(3) #define PMBUS_HAVE_IOUT BIT(4) #define PMBUS_HAVE_PIN BIT(5) #define PMBUS_HAVE_POUT BIT(6) #define PMBUS_HAVE_FAN12 BIT(7) #define PMBUS_HAVE_FAN34 BIT(8) #define PMBUS_HAVE_TEMP BIT(9) #define PMBUS_HAVE_TEMP2 BIT(10) #define PMBUS_HAVE_TEMP3 BIT(11) #define PMBUS_HAVE_STATUS_VOUT BIT(12) #define PMBUS_HAVE_STATUS_IOUT BIT(13) #define PMBUS_HAVE_STATUS_INPUT BIT(14) #define PMBUS_HAVE_STATUS_TEMP BIT(15) #define PMBUS_HAVE_STATUS_FAN12 BIT(16) #define PMBUS_HAVE_STATUS_FAN34 BIT(17) #define PMBUS_HAVE_VMON BIT(18) #define PMBUS_HAVE_STATUS_VMON BIT(19) enum pmbus_data_format { linear = 0, direct, vid }; enum vrm_version { vr11 = 0, vr12, vr13 }; struct pmbus_driver_info { int pages; /* Total number of pages */ enum pmbus_data_format format[PSC_NUM_CLASSES]; enum vrm_version vrm_version[PMBUS_PAGES]; /* * Support one set of coefficients for each sensor type * Used for chips providing data in direct mode. */ int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ int b[PSC_NUM_CLASSES]; /* offset */ int R[PSC_NUM_CLASSES]; /* exponent */ u32 func[PMBUS_PAGES]; /* Functionality, per page */ /* * The following functions map manufacturing specific register values * to PMBus standard register values. Specify only if mapping is * necessary. * Functions return the register value (read) or zero (write) if * successful. A return value of -ENODATA indicates that there is no * manufacturer specific register, but that a standard PMBus register * may exist. Any other negative return value indicates that the * register does not exist, and that no attempt should be made to read * the standard register. */ int (*read_byte_data)(struct i2c_client *client, int page, int reg); int (*read_word_data)(struct i2c_client *client, int page, int reg); int (*write_word_data)(struct i2c_client *client, int page, int reg, u16 word); int (*write_byte)(struct i2c_client *client, int page, u8 value); /* * The identify function determines supported PMBus functionality. * This function is only necessary if a chip driver supports multiple * chips, and the chip functionality is not pre-determined. */ int (*identify)(struct i2c_client *client, struct pmbus_driver_info *info); /* Regulator functionality, if supported by this chip driver. */ int num_regulators; const struct regulator_desc *reg_desc; }; /* Regulator ops */ extern const struct regulator_ops pmbus_regulator_ops; /* Macro for filling in array of struct regulator_desc */ #define PMBUS_REGULATOR(_name, _id) \ [_id] = { \ .name = (_name # _id), \ .id = (_id), \ .of_match = of_match_ptr(_name # _id), \ .regulators_node = of_match_ptr("regulators"), \ .ops = &pmbus_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ } /* Function declarations */ void pmbus_clear_cache(struct i2c_client *client); int pmbus_set_page(struct i2c_client *client, u8 page); int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word); int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); int pmbus_write_byte(struct i2c_client *client, int page, u8 value); int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value); int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg, u8 mask, u8 value); void pmbus_clear_faults(struct i2c_client *client); bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, struct pmbus_driver_info *info); int pmbus_do_remove(struct i2c_client *client); const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client); #endif /* PMBUS_H */