/* * An hwmon driver for the 3Y Power YM-2651Y Power Module * * Copyright (C) 2014 Accton Technology Corporation. * Brandon Chuang * * Based on ad7414.c * Copyright 2006 Stefan Roese , DENX Software Engineering * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #define MAX_FAN_DUTY_CYCLE 100 /* Addresses scanned */ static const unsigned short normal_i2c[] = { 0x58, 0x5b, I2C_CLIENT_END }; /* Each client has this additional data */ struct ym2651y_data { struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if registers are valid */ unsigned long last_updated; /* In jiffies */ u8 capability; /* Register value */ u16 status_word; /* Register value */ u8 fan_fault; /* Register value */ u8 over_temp; /* Register value */ u16 v_out; /* Register value */ u16 i_out; /* Register value */ u16 p_out; /* Register value */ u16 temp; /* Register value */ u16 fan_speed; /* Register value */ u16 fan_duty_cycle[2]; /* Register value */ u8 fan_dir[4]; /* Register value */ u8 pmbus_revision; /* Register value */ u8 mfr_id[10]; /* Register value */ u8 mfr_model[10]; /* Register value */ u8 mfr_revsion[3]; /* Register value */ u16 mfr_vin_min; /* Register value */ u16 mfr_vin_max; /* Register value */ u16 mfr_iin_max; /* Register value */ u16 mfr_iout_max; /* Register value */ u16 mfr_pin_max; /* Register value */ u16 mfr_pout_max; /* Register value */ u16 mfr_vout_min; /* Register value */ u16 mfr_vout_max; /* Register value */ }; static ssize_t show_byte(struct device *dev, struct device_attribute *da, char *buf); static ssize_t show_word(struct device *dev, struct device_attribute *da, char *buf); static ssize_t show_linear(struct device *dev, struct device_attribute *da, char *buf); static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, char *buf); static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, char *buf); static ssize_t show_ascii(struct device *dev, struct device_attribute *da, char *buf); static struct ym2651y_data *ym2651y_update_device(struct device *dev); static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, const char *buf, size_t count); static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value); enum ym2651y_sysfs_attributes { PSU_POWER_ON = 0, PSU_TEMP_FAULT, PSU_POWER_GOOD, PSU_FAN1_FAULT, PSU_FAN_DIRECTION, PSU_OVER_TEMP, PSU_V_OUT, PSU_I_OUT, PSU_P_OUT, PSU_P_OUT_UV, /*In Unit of microVolt, instead of mini.*/ PSU_TEMP1_INPUT, PSU_FAN1_SPEED, PSU_FAN1_DUTY_CYCLE, PSU_PMBUS_REVISION, PSU_MFR_ID, PSU_MFR_MODEL, PSU_MFR_REVISION, PSU_MFR_VIN_MIN, PSU_MFR_VIN_MAX, PSU_MFR_VOUT_MIN, PSU_MFR_VOUT_MAX, PSU_MFR_IIN_MAX, PSU_MFR_IOUT_MAX, PSU_MFR_PIN_MAX, PSU_MFR_POUT_MAX }; /* sysfs attributes for hwmon */ static SENSOR_DEVICE_ATTR(psu_power_on, S_IRUGO, show_word, NULL, PSU_POWER_ON); static SENSOR_DEVICE_ATTR(psu_temp_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_word, NULL, PSU_POWER_GOOD); static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); static SENSOR_DEVICE_ATTR(psu_over_temp, S_IRUGO, show_over_temp, NULL, PSU_OVER_TEMP); static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_linear, NULL, PSU_V_OUT); static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IRUGO, show_ascii, NULL, PSU_FAN_DIRECTION); static SENSOR_DEVICE_ATTR(psu_pmbus_revision, S_IRUGO, show_byte, NULL, PSU_PMBUS_REVISION); static SENSOR_DEVICE_ATTR(psu_mfr_id, S_IRUGO, show_ascii, NULL, PSU_MFR_ID); static SENSOR_DEVICE_ATTR(psu_mfr_model, S_IRUGO, show_ascii, NULL, PSU_MFR_MODEL); static SENSOR_DEVICE_ATTR(psu_mfr_revision, S_IRUGO, show_ascii, NULL, PSU_MFR_REVISION); static SENSOR_DEVICE_ATTR(psu_mfr_vin_min, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MIN); static SENSOR_DEVICE_ATTR(psu_mfr_vin_max, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MAX); static SENSOR_DEVICE_ATTR(psu_mfr_vout_min, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MIN); static SENSOR_DEVICE_ATTR(psu_mfr_vout_max, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MAX); static SENSOR_DEVICE_ATTR(psu_mfr_iin_max, S_IRUGO, show_linear, NULL, PSU_MFR_IIN_MAX); static SENSOR_DEVICE_ATTR(psu_mfr_iout_max, S_IRUGO, show_linear, NULL, PSU_MFR_IOUT_MAX); static SENSOR_DEVICE_ATTR(psu_mfr_pin_max, S_IRUGO, show_linear, NULL, PSU_MFR_PIN_MAX); static SENSOR_DEVICE_ATTR(psu_mfr_pout_max, S_IRUGO, show_linear, NULL, PSU_MFR_POUT_MAX); /*Duplicate nodes for lm-sensors.*/ static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, show_linear, NULL, PSU_P_OUT_UV); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); static struct attribute *ym2651y_attributes[] = { &sensor_dev_attr_psu_power_on.dev_attr.attr, &sensor_dev_attr_psu_temp_fault.dev_attr.attr, &sensor_dev_attr_psu_power_good.dev_attr.attr, &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, &sensor_dev_attr_psu_over_temp.dev_attr.attr, &sensor_dev_attr_psu_v_out.dev_attr.attr, &sensor_dev_attr_psu_i_out.dev_attr.attr, &sensor_dev_attr_psu_p_out.dev_attr.attr, &sensor_dev_attr_psu_temp1_input.dev_attr.attr, &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, &sensor_dev_attr_psu_fan_dir.dev_attr.attr, &sensor_dev_attr_psu_pmbus_revision.dev_attr.attr, &sensor_dev_attr_psu_mfr_id.dev_attr.attr, &sensor_dev_attr_psu_mfr_model.dev_attr.attr, &sensor_dev_attr_psu_mfr_revision.dev_attr.attr, &sensor_dev_attr_psu_mfr_vin_min.dev_attr.attr, &sensor_dev_attr_psu_mfr_vin_max.dev_attr.attr, &sensor_dev_attr_psu_mfr_pout_max.dev_attr.attr, &sensor_dev_attr_psu_mfr_iin_max.dev_attr.attr, &sensor_dev_attr_psu_mfr_pin_max.dev_attr.attr, &sensor_dev_attr_psu_mfr_vout_min.dev_attr.attr, &sensor_dev_attr_psu_mfr_vout_max.dev_attr.attr, &sensor_dev_attr_psu_mfr_iout_max.dev_attr.attr, /*Duplicate nodes for lm-sensors.*/ &sensor_dev_attr_power1_input.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_temp1_fault.dev_attr.attr, NULL }; static ssize_t show_byte(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ym2651y_data *data = ym2651y_update_device(dev); return (attr->index == PSU_PMBUS_REVISION) ? sprintf(buf, "%d\n", data->pmbus_revision) : sprintf(buf, "0\n"); } static ssize_t show_word(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ym2651y_data *data = ym2651y_update_device(dev); u16 status = 0; switch (attr->index) { case PSU_POWER_ON: /* psu_power_on, low byte bit 6 of status_word, 0=>ON, 1=>OFF */ status = (data->status_word & 0x40) ? 0 : 1; break; case PSU_TEMP_FAULT: /* psu_temp_fault, low byte bit 2 of status_word, 0=>Normal, 1=>temp fault */ status = (data->status_word & 0x4) >> 2; break; case PSU_POWER_GOOD: /* psu_power_good, high byte bit 3 of status_word, 0=>OK, 1=>FAIL */ status = (data->status_word & 0x800) ? 0 : 1; break; } return sprintf(buf, "%d\n", status); } static int two_complement_to_int(u16 data, u8 valid_bit, int mask) { u16 valid_data = data & mask; bool is_negative = valid_data >> (valid_bit - 1); return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; } static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct i2c_client *client = to_i2c_client(dev); struct ym2651y_data *data = i2c_get_clientdata(client); int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; long speed; int error; error = kstrtol(buf, 10, &speed); if (error) return error; if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) return -EINVAL; mutex_lock(&data->update_lock); data->fan_duty_cycle[nr] = speed; ym2651y_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t show_linear(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ym2651y_data *data = ym2651y_update_device(dev); u16 value = 0; int exponent, mantissa; int multiplier = 1000; switch (attr->index) { case PSU_V_OUT: value = data->v_out; break; case PSU_I_OUT: value = data->i_out; break; case PSU_P_OUT_UV: multiplier = 1000000; /*For lm-sensors, unit is micro-Volt.*/ /*Passing through*/ case PSU_P_OUT: value = data->p_out; break; case PSU_TEMP1_INPUT: value = data->temp; break; case PSU_FAN1_SPEED: value = data->fan_speed; multiplier = 1; break; case PSU_FAN1_DUTY_CYCLE: value = data->fan_duty_cycle[0]; multiplier = 1; break; case PSU_MFR_VIN_MIN: value = data->mfr_vin_min; break; case PSU_MFR_VIN_MAX: value = data->mfr_vin_max; break; case PSU_MFR_VOUT_MIN: value = data->mfr_vout_min; break; case PSU_MFR_VOUT_MAX: value = data->mfr_vout_max; break; case PSU_MFR_PIN_MAX: value = data->mfr_pin_max; break; case PSU_MFR_POUT_MAX: value = data->mfr_pout_max; break; case PSU_MFR_IOUT_MAX: value = data->mfr_iout_max; break; case PSU_MFR_IIN_MAX: value = data->mfr_iin_max; break; } exponent = two_complement_to_int(value >> 11, 5, 0x1f); mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); } static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ym2651y_data *data = ym2651y_update_device(dev); u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; return sprintf(buf, "%d\n", data->fan_fault >> shift); } static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, char *buf) { struct ym2651y_data *data = ym2651y_update_device(dev); return sprintf(buf, "%d\n", data->over_temp >> 7); } static ssize_t show_ascii(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ym2651y_data *data = ym2651y_update_device(dev); u8 *ptr = NULL; switch (attr->index) { case PSU_FAN_DIRECTION: /* psu_fan_dir */ ptr = data->fan_dir; break; case PSU_MFR_ID: /* psu_mfr_id */ ptr = data->mfr_id; break; case PSU_MFR_MODEL: /* psu_mfr_model */ ptr = data->mfr_model; break; case PSU_MFR_REVISION: /* psu_mfr_revision */ ptr = data->mfr_revsion; break; default: return 0; } return sprintf(buf, "%s\n", ptr); } static const struct attribute_group ym2651y_group = { .attrs = ym2651y_attributes, }; static int ym2651y_probe(struct i2c_client *client, const struct i2c_device_id *dev_id) { struct ym2651y_data *data; int status; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) { status = -EIO; goto exit; } data = kzalloc(sizeof(struct ym2651y_data), GFP_KERNEL); if (!data) { status = -ENOMEM; goto exit; } i2c_set_clientdata(client, data); mutex_init(&data->update_lock); dev_info(&client->dev, "chip found\n"); /* Register sysfs hooks */ status = sysfs_create_group(&client->dev.kobj, &ym2651y_group); if (status) { goto exit_free; } data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { status = PTR_ERR(data->hwmon_dev); goto exit_remove; } dev_info(&client->dev, "%s: psu '%s'\n", dev_name(data->hwmon_dev), client->name); return 0; exit_remove: sysfs_remove_group(&client->dev.kobj, &ym2651y_group); exit_free: kfree(data); exit: return status; } static int ym2651y_remove(struct i2c_client *client) { struct ym2651y_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &ym2651y_group); kfree(data); return 0; } static const struct i2c_device_id ym2651y_id[] = { { "ym2651", 0 }, {} }; MODULE_DEVICE_TABLE(i2c, ym2651y_id); static struct i2c_driver ym2651y_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "ym2651", }, .probe = ym2651y_probe, .remove = ym2651y_remove, .id_table = ym2651y_id, .address_list = normal_i2c, }; static int ym2651y_read_byte(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } static int ym2651y_read_word(struct i2c_client *client, u8 reg) { return i2c_smbus_read_word_data(client, reg); } static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value) { return i2c_smbus_write_word_data(client, reg, value); } static int ym2651y_read_block(struct i2c_client *client, u8 command, u8 *data, int data_len) { int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); if (unlikely(result < 0)) goto abort; if (unlikely(result != data_len)) { result = -EIO; goto abort; } result = 0; abort: return result; } struct reg_data_byte { u8 reg; u8 *value; }; struct reg_data_word { u8 reg; u16 *value; }; static struct ym2651y_data *ym2651y_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct ym2651y_data *data = i2c_get_clientdata(client); mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { int i, status; u8 command; u8 fan_dir[5] = {0}; struct reg_data_byte regs_byte[] = { {0x19, &data->capability}, {0x7d, &data->over_temp}, {0x81, &data->fan_fault}, {0x98, &data->pmbus_revision}}; struct reg_data_word regs_word[] = { {0x79, &data->status_word}, {0x8b, &data->v_out}, {0x8c, &data->i_out}, {0x96, &data->p_out}, {0x8d, &data->temp}, {0x3b, &(data->fan_duty_cycle[0])}, {0x3c, &(data->fan_duty_cycle[1])}, {0x90, &data->fan_speed}, {0xa0, &data->mfr_vin_min}, {0xa1, &data->mfr_vin_max}, {0xa2, &data->mfr_iin_max}, {0xa3, &data->mfr_pin_max}, {0xa4, &data->mfr_vout_min}, {0xa5, &data->mfr_vout_max}, {0xa6, &data->mfr_iout_max}, {0xa7, &data->mfr_pout_max}}; dev_dbg(&client->dev, "Starting ym2651 update\n"); /* Read byte data */ for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { status = ym2651y_read_byte(client, regs_byte[i].reg); if (status < 0) { dev_dbg(&client->dev, "reg %d, err %d\n", regs_byte[i].reg, status); } else { *(regs_byte[i].value) = status; } } /* Read word data */ for (i = 0; i < ARRAY_SIZE(regs_word); i++) { status = ym2651y_read_word(client, regs_word[i].reg); if (status < 0) { dev_dbg(&client->dev, "reg %d, err %d\n", regs_word[i].reg, status); } else { *(regs_word[i].value) = status; } } /* Read fan_direction */ command = 0xC3; status = ym2651y_read_block(client, command, fan_dir, ARRAY_SIZE(fan_dir)-1); if (status < 0) { dev_dbg(&client->dev, "reg %d, err %d\n", command, status); } strncpy(data->fan_dir, fan_dir+1, ARRAY_SIZE(data->fan_dir)-1); data->fan_dir[ARRAY_SIZE(data->fan_dir)-1] = '\0'; /* Read mfr_id */ command = 0x99; status = ym2651y_read_block(client, command, data->mfr_id, ARRAY_SIZE(data->mfr_id)-1); data->mfr_id[ARRAY_SIZE(data->mfr_id)-1] = '\0'; if (status < 0) dev_dbg(&client->dev, "reg %d, err %d\n", command, status); /* Read mfr_model */ command = 0x9a; status = ym2651y_read_block(client, command, data->mfr_model, ARRAY_SIZE(data->mfr_model)-1); data->mfr_model[ARRAY_SIZE(data->mfr_model)-1] = '\0'; if (status < 0) dev_dbg(&client->dev, "reg %d, err %d\n", command, status); /* Read mfr_revsion */ command = 0x9b; status = ym2651y_read_block(client, command, data->mfr_revsion, ARRAY_SIZE(data->mfr_revsion)-1); data->mfr_revsion[ARRAY_SIZE(data->mfr_revsion)-1] = '\0'; if (status < 0) dev_dbg(&client->dev, "reg %d, err %d\n", command, status); data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; } module_i2c_driver(ym2651y_driver); MODULE_AUTHOR("Brandon Chuang "); MODULE_DESCRIPTION("3Y Power YM-2651Y driver"); MODULE_LICENSE("GPL");