#!/bin/sh -x # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. SONIC_VERSION=$(cat /etc/sonic/sonic_version.yml | grep "build_version" | sed -e "s/build_version: //g;s/'//g") FIRST_BOOT_FILE="/host/image-${SONIC_VERSION}/platform/firsttime" # Move sonic-environment to /etc/sonic SONIC_CONFIG_DIR="/host/image-${SONIC_VERSION}/sonic-config" SONIC_ENV_FILE=${SONIC_CONFIG_DIR}/sonic-environment if [ -d ${SONIC_CONFIG_DIR} -a -f ${SONIC_ENV_FILE} ]; then echo "moving file ${SONIC_ENV_FILE} to /etc/sonic" 1>&2 mv ${SONIC_ENV_FILE} /etc/sonic fi # In case the unit is migrating from another NOS, save the logs log_migration() { echo $1 >> /host/migration/migration.log } # Import files from another NOS's partition onto SONiC nos_migration_import() { [ -f $1 ] && cp $1 $2 || log_migration "ERROR: $1 not found!" } # While migrating form another NOS, we need to preserve the MAC addresses # of eth0 (and eventually switchports). # Update the eth0 mac and also the EEPROM using ethtool so that subsequent # reboots use the NOS's mac. # Input : mgmt_interface.cfg file imported from the previous NOS. update_mgmt_interface_macaddr() { mgmt_config=$1 if [ ! -f "$mgmt_config" ]; then log_migration "ERROR : unable update eth0 MAC : $mgmt_config not found!" return fi # Save the previous NOS's mac old_mac=`ip link show eth0 | grep ether | awk '{print $2}'` [ -z "$old_mac" ] && log_migration "Unable to retrieve old mac address !" && return # Extract, validate and set the eth0's mac address for the current session new_mac=$(grep "macaddr" $mgmt_config | awk -F'=' '{print $2}') log_migration "Setting eth0 mac as $new_mac." if [ `echo $new_mac | egrep "^([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}$"` ]; then ip link set eth0 down ip link set eth0 address $new_mac ip link set eth0 up else log_migration "ERROR: mac imported from NOS is invalid : $new_mac !" return fi # Get the ethtool magic and offset for changing the mac address in the EEPROM ethtool_magic=$(grep "ethtool_magic" $mgmt_config | awk -F'=' '{print $2}') ethtool_offset=$(grep "ethtool_offset" $mgmt_config | awk -F'=' '{print $2}') if [ -z "$ethtool_magic" ] || [ -z "$ethtool_offset" ]; then log_migration "Unable to retrieve ethtool params ($ethtool_magic,$ethtool_offset)" return fi log_migration "eth0 mac in EEPROM before update:" ethtool -e eth0 offset $ethtool_offset length 6 >> /host/migration/migration.log # Update the mac address in the EEPROM for subsequent reboots # Write only changed octets for i in 1 2 3 4 5 6; do offset=$(($ethtool_offset+$i-1)) old_mac_octet="$(echo $old_mac | cut -d":" -f$i)" new_mac_octet="$(echo $new_mac | cut -d":" -f$i)" if [ "$old_mac_octet" != "$new_mac_octet" ]; then ethtool -E eth0 magic $ethtool_magic offset $offset value 0x$new_mac_octet if [ $? != 0 ]; then log_migration "ERROR: unable to update eth0 EEPROM!" log_migration "index $i, magic $ethtool_magic offset $offset, value $new_mac_octet" return fi fi done log_migration "eth0 mac in EEPROM after update:" ethtool -e eth0 offset $ethtool_offset length 6 >> /host/migration/migration.log } migrate_nos_configuration() { rm -rf /host/migration mkdir -p /host/migration # Extract the previous NOS's partition that contains the migration artifacts set -- $(cat /proc/cmdline) for x in "$@"; do case "$x" in nos-config-part=*) nos_dev="${x#nos-config-part=}" ;; SONIC_BOOT_TYPE=fast*) sonic_fast_reboot=true ;; esac done if [ -n "$nos_dev" ]; then # remove nos-config-part from cmdline sed -r -i.bak "s/nos-config-part=[^[:space:]]+//" /host/grub/grub.cfg # Mount the previous NOS's partition NOS_DIR=/mnt/nos_migration MG_GZFILE=$NOS_DIR/minigraph.xml.gz.base64.txt MG_FILE=$NOS_DIR/minigraph.xml ACL_GZFILE=$NOS_DIR/acl.json.gz.base64.txt ACL_FILE=$NOS_DIR/acl.json SNMP_FILE=$NOS_DIR/snmp.yml mkdir -p $NOS_DIR mount $nos_dev $NOS_DIR if [ $? != 0 ]; then log_migration "ERROR: cannot mount $nos_dev" else # decode & unzip minigraph.xml.gz.base64.txt [ -f $MG_GZFILE ] && /usr/bin/base64 -d $MG_GZFILE | /bin/gunzip > $MG_FILE [ -f $ACL_GZFILE ] && /usr/bin/base64 -d $ACL_GZFILE | /bin/gunzip > $ACL_FILE # Copy relevant files nos_migration_import $NOS_DIR/mgmt_interface.cfg /host/migration nos_migration_import $MG_FILE /host/migration nos_migration_import $ACL_FILE /host/migration nos_migration_import $SNMP_FILE /host/migration if [ "$sonic_fast_reboot" == true ]; then mkdir -p /host/fast-reboot nos_migration_import $NOS_DIR/arp.json /host/fast-reboot nos_migration_import $NOS_DIR/fdb.json /host/fast-reboot nos_migration_import $NOS_DIR/default_routes.json /host/fast-reboot fi umount $NOS_DIR rmdir $NOS_DIR fi [ -f /host/migration/mgmt_interface.cfg ] && update_mgmt_interface_macaddr /host/migration/mgmt_interface.cfg migration="TRUE" fi } firsttime_exit() { rm -rf $FIRST_BOOT_FILE exit 0 } # Given a string of tuples of the form field=value, extract the value for a field # In : $string, $field # Out: $value value_extract() { set -- $string for x in "$@"; do case "$x" in $field=*) value="${x#$field=}" esac done } program_console_speed() { speed=$(cat /proc/cmdline | grep -Eo 'console=ttyS[0-9]+,[0-9]+' | cut -d "," -f2) if [ -z "$speed" ]; then CONSOLE_SPEED=9600 else CONSOLE_SPEED=$speed fi sed -i "s|\-\-keep\-baud .* %I| $CONSOLE_SPEED %I|g" /lib/systemd/system/serial-getty@.service systemctl daemon-reload } #### Begin Main Body #### logger "SONiC version ${SONIC_VERSION} starting up..." # If the machine.conf is absent, it indicates that the unit booted # into SONiC from another NOS. Extract the machine.conf from ONIE. grub_installation_needed="" if [ ! -e /host/machine.conf ]; then onie_dev=$(blkid | grep ONIE-BOOT | head -n 1 | awk '{print $1}' | sed -e 's/:.*$//') mkdir -p /mnt/onie-boot mount $onie_dev /mnt/onie-boot onie_grub_cfg=/mnt/onie-boot/onie/grub/grub-machine.cfg if [ ! -e $onie_grub_cfg ]; then log_migration "$onie_grub_cfg not found" else . ./$onie_grub_cfg grep = $onie_grub_cfg | sed -e 's/onie_//' -e 's/=.*$//' | while read var ; do eval val='$'onie_$var echo "onie_${var}=${val}" >> /host/machine.conf done grub_installation_needed="TRUE" fi umount /mnt/onie-boot fi migrate_nos_configuration . /host/machine.conf program_console_speed if [ -f $FIRST_BOOT_FILE ]; then echo "First boot detected. Performing first boot tasks..." if [ -n "$aboot_platform" ]; then platform=$aboot_platform elif [ -n "$onie_platform" ]; then platform=$onie_platform else echo "Unknown SONiC platform" firsttime_exit fi # Try to take old configuration saved during installation # and create a flag in /tmp/ to let updategraph service know if [ -d /host/old_config ]; then mv -f /host/old_config /etc/sonic/ rm -rf /etc/sonic/old_config/old_config touch /tmp/pending_config_migration elif [ -f /host/minigraph.xml ]; then mkdir -p /etc/sonic/old_config mv /host/minigraph.xml /etc/sonic/old_config/ [ -f /host/acl.json ] && mv /host/acl.json /etc/sonic/old_config/ [ -f /host/snmp.yml ] && mv /host/snmp.yml /etc/sonic/old_config/ touch /tmp/pending_config_migration elif [ -n "$migration" ] && [ -f /host/migration/minigraph.xml ]; then mkdir -p /etc/sonic/old_config mv /host/migration/minigraph.xml /etc/sonic/old_config/ [ -f /host/migration/acl.json ] && mv /host/migration/acl.json /etc/sonic/old_config/ [ -f /host/migration/snmp.yml ] && mv /host/migration/snmp.yml /etc/sonic/old_config/ touch /tmp/pending_config_migration [ -f /etc/sonic/updategraph.conf ] && sed -i -e "s/enabled=false/enabled=true/g" /etc/sonic/updategraph.conf else touch /tmp/pending_config_initialization fi # Notify firstboot to Platform, to use it for reboot-cause touch /tmp/notify_firstboot_to_platform # Create /host/reboot-cause/platform/ directory # can be used to track last reboot reason by some platforms if [ ! -d /host/reboot-cause/platform ]; then mkdir -p /host/reboot-cause/platform fi if [ -d /host/image-$SONIC_VERSION/platform/$platform ]; then dpkg -i /host/image-$SONIC_VERSION/platform/$platform/*.deb fi sync # If the unit booted into SONiC from another NOS's grub, # we now install a grub for SONiC. if [ -n "$onie_platform" ] && [ -n "$grub_installation_needed" ]; then grub_bin=$(ls /host/image-$SONIC_VERSION/platform/x86_64-grub/grub-pc-bin*.deb 2> /dev/null) if [ -z "$grub_bin" ]; then log_migration "Unable to locate grub package !" firsttime_exit fi dpkg -i $grub_bin > /dev/null 2>&1 if [ $? != 0 ]; then log_migration "Unable to install grub package !" firsttime_exit fi # Determine the block device to install grub sonic_dev=$(blkid | grep SONiC-OS | head -n 1 | awk '{print $1}' | sed -e 's/[0-9]:.*$//') if [ -z "$sonic_dev" ]; then log_migration "Unable to determine sonic partition !" firsttime_exit fi grub-install --boot-directory=/host --recheck $sonic_dev 2>/dev/null if [ $? != 0 ]; then log_migration "grub install failed !" firsttime_exit fi # The SONiC "raw" build mode has already generated a proto grub.cfg # as part of the migration. Platform specific constants need to be # retrieved from installer.conf (if present) and assigned. . /usr/share/sonic/device/$platform/installer.conf if [ ! -z "$CONSOLE_PORT" ]; then field="\-\-port" string=$(grep $field /host/grub.cfg) value_extract $string $field console_port=$value if [ ! -z "$console_port" ] && [ "$console_port" != "$CONSOLE_PORT" ]; then sed -i -e "s/\-\-port=$console_port/\-\-port=$CONSOLE_PORT/g" /host/grub.cfg fi log_migration "grub.cfg console port=$console_port & installer.conf CONSOLE_PORT=$CONSOLE_PORT" fi if [ ! -z "$CONSOLE_DEV" ]; then field="console" string=$(grep $field /host/grub.cfg) value_extract $string $field console_dev_name=$(echo $value | sed -e "s/^.*=//" -e "s/,.*//") console_dev="${console_dev_name#ttyS}" if [ "$console_dev" != "$CONSOLE_DEV" ]; then sed -i -e "s/console=ttyS$console_dev/console=ttyS$CONSOLE_DEV/g" /host/grub.cfg fi log_migration "grub.cfg console dev=$console_dev & installer.conf CONSOLE_DEV=$CONSOLE_DEV" fi if [ ! -z "$VAR_LOG_SIZE" ]; then field="var_log_size" string=$(grep $field /host/grub.cfg) value_extract $string $field var_log_size=$value if [ ! -z "$var_log_size" ] && [ "$var_log_size" != "$VAR_LOG_SIZE" ]; then sed -i -e "s/var_log_size=$var_log_size/var_log_size=$VAR_LOG_SIZE/g" /host/grub.cfg fi log_migration "grub.cfg var_log_size=$var_log_size & installer.conf VAR_LOG_SIZE=$VAR_LOG_SIZE" fi # Set the root based on the label sonic_root=$(blkid | grep SONiC-OS | head -n 1 | awk '{print $1}' | sed -e 's/:.*$//') sonic_root=$(echo "$sonic_root" | sed 's/\//\\\//g') sed -i -e "s/%%SONIC_ROOT%%/$sonic_root/g" /host/grub.cfg # Add the Diag and ONIE entries mount $onie_dev /mnt/onie-boot . /mnt/onie-boot/onie/grub.d/50_onie_grub >> /host/grub.cfg umount /mnt/onie-boot # Initialize the SONiC's grub config mv /host/grub.cfg /host/grub/grub.cfg fi # Create dir where following scripts put their output files mkdir -p /var/platform # Kdump tools configuration sed -i -e "s/__PLATFORM__/$platform/g" /etc/default/kdump-tools firsttime_exit fi # Copy the fsck log into syslog if [ -f /var/log/fsck.log.gz ]; then gunzip -d -c /var/log/fsck.log.gz | logger -t "FSCK" rm -f /var/log/fsck.log.gz fi exit 0