#!/bin/bash

### BEGIN INIT INFO
# Provides:          setup-board
# Required-Start:    $portmap
# Required-Stop:
# Should-Start:
# Should-Stop:
# Default-Start:     S
# Default-Stop:      0 6
# Short-Description: Setup DX010 board.
### END INIT INFO

function export_gpio {
label=$3
gpio_dir=$2
gpio_num=$1
gpio_base=`( cat /sys/class/gpio/gpiochip*/base | head -1 ) 2>/dev/null`
gpio_label=`( cat /sys/class/gpio/gpiochip*/label | head -1 ) 2>/dev/null`
if [[ "X$gpio_base" == "X" ]] ||
( [[ "X$label" != "X" ]] && [[ "$label" != "$gpio_label" ]] ); then
        echo "Platform driver error: No gpiochip found!"
        exit 1;
fi
ionum=$((gpio_base+gpio_num))
echo $ionum > /sys/class/gpio/export
if [ $? -ne 0 ]; then
        echo "Platform driver error: Cannot export gpio$ionum!"
        exit 1;
fi
if [[ "X$gpio_dir" != "X" ]]; then
        echo $gpio_dir > /sys/class/gpio/gpio${ionum}/direction
        if [ $? -ne 0 ]; then
                echo "Platform driver error: Cannot set direction of gpio$ionum!"
                exit 1;
        fi
fi
}

case "$1" in
start)
        echo -n "Setting up board... "

        modprobe i2c-dev
        modprobe i2c-mux-pca954x force-deselect-on-exit=1
        modprobe dx010_wdt
        modprobe leds-dx010
        modprobe lm75
        modprobe slx_gpio_ich

        found=0
        for devnum in 0 1; do
                devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name`
                # iSMT adapter can be at either dffd0000 or dfff0000
                if [[ $devname == 'SMBus iSMT adapter at '* ]]; then
                        found=1
                break
                fi
        done

        [ $found -eq 0 ] && echo "cannot find iSMT" && exit 1

        i2cset -y ${devnum} 0x70 0x10 0x00 0x01 i
        sleep 1

        # Attach PCA9548 0x71 Channel Extender for Main Board
        echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-${devnum}/new_device
        sleep 1

        # Attach PCA9548 0x73 Channel Extender for CPU Board
        echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-${devnum}/new_device
        sleep 1

        # Attach PCA9548 0x77 Channel Extender for Fan's EEPROMs
        echo pca9548 0x77 > /sys/bus/i2c/devices/i2c-${devnum}/new_device
        sleep 1

        # Attach syseeprom
        echo 24lc64t 0x50 > /sys/bus/i2c/devices/i2c-12/new_device

        # Attach temperature sensors
        echo lm75b 0x48 > /sys/bus/i2c/devices/i2c-5/new_device
        echo lm75b 0x49 > /sys/bus/i2c/devices/i2c-6/new_device
        echo lm75b 0x4a > /sys/bus/i2c/devices/i2c-7/new_device
        echo lm75b 0x48 > /sys/bus/i2c/devices/i2c-14/new_device
        echo lm75b 0x4e > /sys/bus/i2c/devices/i2c-15/new_device

        # Attach fans
        echo emc2305 0x2e > /sys/bus/i2c/devices/i2c-13/new_device
        echo emc2305 0x4d > /sys/bus/i2c/devices/i2c-13/new_device

        # Attach PSUs
        echo dps460 0x5a > /sys/bus/i2c/devices/i2c-10/new_device
        echo dps460 0x5b > /sys/bus/i2c/devices/i2c-11/new_device

        # Attach PCA9506 GPIO expander for 40 pins
        echo pca9505 0x20 > /sys/bus/i2c/devices/i2c-17/new_device

        modprobe dx010_cpld
        sleep 2

        # Export platform gpio sysfs
        export_gpio 10 "in" # Fan 1 present
        export_gpio 11 "in" # Fan 2 present
        export_gpio 12 "in" # Fan 3 present
        export_gpio 13 "in" # Fan 4 present
        export_gpio 14 "in" # Fan 5 present

        export_gpio 15 "in" # Fan 1 direction
        export_gpio 16 "in" # Fan 2 direction
        export_gpio 17 "in" # Fan 3 direction
        export_gpio 18 "in" # Fan 4 direction
        export_gpio 19 "in" # Fan 5 direction

        export_gpio 22 "in" # PSU L PWOK
        export_gpio 25 "in" # PSU R PWOK
        export_gpio 27 "in" # PSU L ABS
        export_gpio 28 "in" # PSU R ABS

        export_gpio 29 "out" # Fan 1 LED: Red
        export_gpio 30 "out" # Fan 1 LED: Yellow
        export_gpio 31 "out" # Fan 2 LED: Red
        export_gpio 32 "out" # Fan 2 LED: Yellow
        export_gpio 33 "out" # Fan 3 LED: Red
        export_gpio 34 "out" # Fan 3 LED: Yellow
        export_gpio 35 "out" # Fan 4 LED: Red
        export_gpio 36 "out" # Fan 4 LED: Yellow
        export_gpio 37 "out" # Fan 5 LED: Red
        export_gpio 38 "out" # Fan 5 LED: Yellow

        # Turn off/down lpmod by defult (0 - Normal, 1 - Low Pow)
        echo 0x00000000 > /sys/devices/platform/dx010_cpld/qsfp_lpmode

        # Attach 32 instances of EEPROM driver QSFP ports
        for ((n=26;n<=58;n++));
        do
                echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-$n/new_device
        sleep 0.1
        done

        /bin/sh /usr/local/bin/platform_api_mgnt.sh init

        echo "done."
        ;;

stop)
        echo "done."
        ;;

force-reload|restart)
        echo "Not supported"
        ;;

*)
        echo "Usage: /etc/init.d/platform-modules-dx010.init {start|stop}"
        exit 1
        ;;
esac

exit 0