/*
 * A hwmon driver for the CIG cs5435-54P Power Module
 *
 * Copyright (C) 2018 Cambridge, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/syscalls.h>
#include <linux/kthread.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include "i2c-algo-lpc.h"



#define MAX_FAN_DUTY_CYCLE 100

/* Address scanned */
static const unsigned short normal_i2c[] = {I2C_CLIENT_END };

/* This is additional data */
struct cs5435_54p_psu_data {
	struct device	*hwmon_dev;
	struct mutex	update_lock;
	char		valid;
	unsigned long	last_updated;	/* In jiffies */

	/* Registers value */
	u8	vout_mode;
	u16	v_in;
	u16	v_out;
	u16	i_in;
	u16	i_out;
	u16	p_in;
	u16	p_out;
	u16	temp_input[3];
	u8	temp_fault;
	u8	fan_fault;
	u16	fan_duty_cycle[2];
	u16	fan_speed[2];
	u8	mfr_id[8];
	u8	mfr_model[20];
	u8	mfr_serial[20];
	u8	psu_is_present;
	u8	psu_is_good;
	struct i2c_client	  *client;
	struct bin_attribute *bin;			/* eeprom data */
};

static int two_complement_to_int(u16 data, u8 valid_bit, int mask);
static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *dev_attr, const char *buf, size_t count);
static ssize_t for_linear_data(struct device *dev, struct device_attribute *dev_attr, char *buf);
static ssize_t for_fan_fault(struct device *dev, struct device_attribute *dev_attr, char *buf);
static ssize_t for_fan_warning(struct device *dev, struct device_attribute *dev_attr, char *buf);
static ssize_t for_temp_fault(struct device *dev, struct device_attribute *dev_attr, char *buf);
static ssize_t for_temp_warning(struct device *dev, struct device_attribute *dev_attr, char *buf);
static ssize_t for_vout_data(struct device *dev, struct device_attribute *dev_attr, char *buf);
static int cs5435_54p_psu_read_byte(struct i2c_client *client, u8 reg);
static int cs5435_54p_psu_read_word(struct i2c_client *client, u8 reg);
static int cs5435_54p_psu_write_word(struct i2c_client *client, u8 reg, u16 value);
static int cs5435_54p_psu_read_block(struct i2c_client *client, u8 command, u8 *data, int data_len);
static struct cs5435_54p_psu_data *cs5435_54p_psu_update_device(struct device *dev);
static ssize_t for_ascii(struct device *dev, struct device_attribute *dev_attr, char *buf);
static ssize_t for_status(struct device *dev, struct device_attribute *dev_attr, char *buf);

enum cs5435_54p_psu_sysfs_attributes {
	PSU_V_IN,
	PSU_V_OUT,
	PSU_I_IN,
	PSU_I_OUT,
	PSU_P_IN,
	PSU_P_OUT,
	PSU_TEMP1_INPUT,
	PSU_TEMP2_INPUT,
	PSU_TEMP3_INPUT,
	PSU_TEMP_FAULT,
	PSU_TEMP_WARN,
	PSU_FAN1_FAULT,
	PSU_FAN1_WARN,
	PSU_FAN1_DUTY_CYCLE,
	PSU_FAN1_SPEED,
	PSU_MFR_ID,
	PSU_MFR_MODEL,
	PSU_MFR_SERIAL,
	PSU_PRESENT,
	PSU_P_GOOD,
};

static int two_complement_to_int(u16 data, u8 valid_bit, int mask)
{
	u16  valid_data  = data & mask;

	bool is_negative = valid_data >> (valid_bit - 1);
	return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data;
}

static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute \
				*dev_attr, const char *buf, size_t count)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct i2c_client *client = to_i2c_client(dev);
	struct cs5435_54p_psu_data *data = i2c_get_clientdata(client);
	int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1;
	long speed;
	int error;

	if (data->valid != 1)
	{
        return -ENODEV;
	}

	error = kstrtol(buf, 10, &speed);
	if (error)
		return error;

	if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE)
		return -EINVAL;


	mutex_lock(&data->update_lock);
	data->fan_duty_cycle[nr] = speed;
	cs5435_54p_psu_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]);
	mutex_unlock(&data->update_lock);

	return count;
}

static ssize_t for_linear_data(struct device *dev, struct device_attribute *dev_attr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);

	u16 value = 0;
	int exponent, mantissa;
	int multiplier = 1000;

	if (data->valid != 1)
	{
        return -ENODEV;
	}

	switch (attr->index) {
	case PSU_V_IN:
		value = data->v_in;
		break;
	case PSU_I_IN:
		value = data->i_in;
		break;
	case PSU_I_OUT:
		value = data->i_out;
		break;
	case PSU_P_IN:
		value = data->p_in;
		break;
	case PSU_P_OUT:
		value = data->p_out;
		break;
	case PSU_TEMP1_INPUT:
		value = data->temp_input[0];
		break;
	case PSU_TEMP2_INPUT:
		value = data->temp_input[1];
		break;
	case PSU_TEMP3_INPUT:
		value = data->temp_input[2];
		break;
	case PSU_FAN1_DUTY_CYCLE:
		multiplier = 1;
		value = data->fan_duty_cycle[0];
		break;
	case PSU_FAN1_SPEED:
		multiplier = 1;
		value = data->fan_speed[0];
		break;
	default:
		break;
	}

	exponent = two_complement_to_int(value >> 11, 5, 0x1f);
	mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff);

	return (exponent >= 0) ? sprintf(buf, "%d\n",	\
		(mantissa << exponent) * multiplier) :	\
	    sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent));
}

static ssize_t for_fan_fault(struct device *dev, struct device_attribute \
							*dev_attr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);

	if (data->valid != 1)
	{
        return -ENODEV;
	}

	u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6;

	return sprintf(buf, "%d\n", data->fan_fault >> shift);
}

static ssize_t for_fan_warning(struct device *dev, struct device_attribute \
							*dev_attr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);

	if (data->valid != 1)
	{
        return -ENODEV;
	}

	u8 shift = (attr->index == PSU_FAN1_WARN) ? 5 : 4;

	return sprintf(buf, "%d\n", data->fan_fault >> shift);
}

static ssize_t for_temp_fault(struct device *dev, struct device_attribute \
							*dev_attr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);

	if (data->valid != 1)
	{
        return -ENODEV;
	}



	return sprintf(buf, "%d\n", data->temp_fault >> 7);
}

static ssize_t for_temp_warning(struct device *dev, struct device_attribute \
							*dev_attr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);
	if (data->valid != 1)
	{
        return -ENODEV;
	}


	return sprintf(buf, "%d\n", data->temp_fault >> 6);
}
static ssize_t for_vout_data(struct device *dev, struct device_attribute \
		 					*dev_attr, char *buf)
{
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);
	int exponent, mantissa;
	int multiplier = 1000;
	if (data->valid != 1)
	{
        return -ENODEV;
	}


	exponent = two_complement_to_int(data->vout_mode, 5, 0x1f);
	mantissa = data->v_out;

	return (exponent > 0) ? sprintf(buf, "%d\n", \
		(mantissa << exponent) * multiplier) : \
		sprintf(buf, "%d\n", ((mantissa  * multiplier) >> (-exponent)));
}

static ssize_t for_ascii(struct device *dev, struct device_attribute \
	 						*dev_attr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);
	u8 *ptr = NULL;

	if (data->valid != 1)
	{
        return -ENODEV;
	}

	switch (attr->index) {
	case PSU_MFR_ID:
		ptr = data->mfr_id + 1;
		break;
	case PSU_MFR_MODEL:
		ptr = data->mfr_model + 1;
		break;
	case PSU_MFR_SERIAL:
		ptr = data->mfr_serial + 1;
		break;
	default:
		return 0;
	}
	return sprintf(buf, "%s\n", ptr);
}


static ssize_t for_status(struct device *dev, struct device_attribute *dev_attr, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
	struct cs5435_54p_psu_data *data = cs5435_54p_psu_update_device(dev);
	u8 *ptr = NULL;

    u8 status = 0;

    if (attr->index == PSU_PRESENT) {
		status = data->psu_is_present;
    }
    else { /* PSU_POWER_GOOD */
        if (!data->valid) {
            return -ENODEV;
        }

		status = data->psu_is_good;
    }

    return sprintf(buf, "%d\n", status);
}


static int cs5435_54p_psu_read_byte(struct i2c_client *client, u8 reg)
{
	return i2c_smbus_read_byte_data(client, reg);
}

static int cs5435_54p_psu_read_word(struct i2c_client *client, u8 reg)
{
	return i2c_smbus_read_word_data(client, reg);
}

static int cs5435_54p_psu_write_word(struct i2c_client *client, u8 reg, \
								u16 value)
{
	union i2c_smbus_data data;
        data.word = value;
        return i2c_smbus_xfer(client->adapter, client->addr,
				client->flags |= I2C_CLIENT_PEC,
                              	I2C_SMBUS_WRITE, reg,
                              	I2C_SMBUS_WORD_DATA, &data);

}

static int cs5435_54p_psu_read_block(struct i2c_client *client, u8 command, \
							u8 *data, int data_len)
{
	int result = i2c_smbus_read_i2c_block_data(client, command, data_len,
									data);
	if (unlikely(result < 0))
		goto abort;
	if (unlikely(result != data_len)) {
		result = -EIO;
		goto abort;
	}

	result = 0;
abort:
	return result;

}

struct reg_data_byte {
	u8 reg;
	u8 *value;
};

struct reg_data_word {
	u8 reg;
	u16 *value;
};



#define EEPROM_NAME				"psu_eeprom"
#define EEPROM_SIZE				256	/*	256 byte eeprom */

/* Platform dependent --- */
static ssize_t psu_eeprom_write(struct i2c_client *client, u8 command, const char *data,
			  int data_len)
{
	int status, retry = 3;

	if (data_len > I2C_SMBUS_BLOCK_MAX) {
		data_len = I2C_SMBUS_BLOCK_MAX;
	}

	while (retry) {
		status = i2c_smbus_write_i2c_block_data(client, command, data_len, data);
		if (unlikely(status < 0)) {
			msleep(100);
			retry--;
			continue;
		}

		break;
	}

	if (unlikely(status < 0)) {
		return status;
	}

	return data_len;

}


static ssize_t psu_page_write(struct i2c_client *client,const char *buf, loff_t off, size_t count)
{
	ssize_t retval = 0;

	if (unlikely(!count)) {
		return count;
	}

	/*
	 * Write data to chip, protecting against concurrent updates
	 * from this host, but not from other I2C masters.
	 */


	while (count) {
		ssize_t status;

		status = psu_eeprom_write(client, off, buf, count);
		if (status <= 0) {
			if (retval == 0) {
				retval = status;
			}
			break;
		}
		buf += status;
		off += status;
		count -= status;
		retval += status;
	}


	return retval;
}



static ssize_t psu_bin_write(struct file *filp, struct kobject *kobj,
				struct bin_attribute *attr,
				char *buf, loff_t off, size_t count)
{
	int present;
	struct cs5435_54p_psu_data *data;
	ssize_t retval = 0;
	struct i2c_client *client;

	data = dev_get_drvdata(container_of(kobj, struct device, kobj));
	client = to_i2c_client(container_of(kobj, struct device, kobj));

	mutex_lock(&data->update_lock);
	retval =  psu_page_write(client, buf, off, count);
	mutex_unlock(&data->update_lock);
	return retval;
}


static ssize_t psu_eeprom_read(struct i2c_client *client, u8 command, u8 *data,
			  int data_len)
{
	int status, retry = 3;

	if (data_len > I2C_SMBUS_BLOCK_MAX) {
		data_len = I2C_SMBUS_BLOCK_MAX;
	}

	while (retry) {
		status = i2c_smbus_read_i2c_block_data(client, command, data_len, data);
		if (unlikely(status < 0)) {
			msleep(100);
			retry--;
			continue;
		}

		break;
	}

	if (unlikely(status < 0)) {
		goto abort;
	}
	if (unlikely(status != data_len)) {
		status = -EIO;
		goto abort;
	}

abort:
	return status;
}



static ssize_t psu_page_read(struct i2c_client *client,char *buf, loff_t off, size_t count)
{
	ssize_t retval = 0;

	if (unlikely(!count)) {
		printk("Count = 0, return");
		return count;
	}
	/*
	 * Read data from chip, protecting against concurrent updates
	 * from this host, but not from other I2C masters.
	 */


	while (count) {
		ssize_t status;

		status = psu_eeprom_read(client, off, buf, count);
		if (status <= 0) {
			if (retval == 0) {
				retval = status;
			}
			break;
		}

		buf += status;
		off += status;
		count -= status;
		retval += status;
	}


	return retval;

}


static ssize_t psu_bin_read(struct file *filp, struct kobject *kobj,
			struct bin_attribute *attr,
			char *buf, loff_t off, size_t count)
{
	int present;
	struct cs5435_54p_psu_data *data;
	struct i2c_client *client;
	ssize_t retval = 0;

	data = dev_get_drvdata(container_of(kobj, struct device, kobj));
	client = to_i2c_client(container_of(kobj, struct device, kobj));
	mutex_lock(&data->update_lock);
	retval = psu_page_read(client, buf, off, count);
	mutex_unlock(&data->update_lock);

	return retval;
}



static int psu_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom)
{
	int err;

	sysfs_bin_attr_init(eeprom);
	eeprom->attr.name = EEPROM_NAME;
	eeprom->attr.mode = S_IWUSR | S_IRUGO;
	eeprom->read	  = psu_bin_read;
	eeprom->write	  = psu_bin_write;
	eeprom->size	  = EEPROM_SIZE;

	/* Create eeprom file */
	err = sysfs_create_bin_file(kobj, eeprom);
	if (err) {
		return err;
	}

	return 0;
}


static int psu_sysfs_eeprom_cleanup(struct kobject *kobj, struct bin_attribute *eeprom)
{
	sysfs_remove_bin_file(kobj, eeprom);
	return 0;
}


static int psu_i2c_check_functionality(struct i2c_client *client)
{
	return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK);
}



static int psu_eeprom_probe(struct i2c_client *client, const struct i2c_device_id *dev_id)
{
	int status;

	struct cs5435_54p_psu_data *data;

	if (!psu_i2c_check_functionality(client)) {
		status = -EIO;
		goto exit;
	}

	data = kzalloc(sizeof(*data), GFP_KERNEL);
	if (!data) {
		status = -ENOMEM;
		goto exit;
	}

	i2c_set_clientdata(client, data);
	data->valid = 0;
	mutex_init(&data->update_lock);

	data->bin = kzalloc(sizeof(struct bin_attribute), GFP_KERNEL);
	if (!data->bin) {
		status = -ENOMEM;
		goto eeprom_bin_error;
	}

	/* init eeprom */
	status = psu_sysfs_eeprom_init(&client->dev.kobj, data->bin);
	if (status) {
		status = -ENOMEM;
		goto sys_init_error;
	}

	dev_info(&client->dev, "psu eeprom '%s'\n", client->name);

	return 0;

	sys_init_error:
		kfree(data->bin);

	eeprom_bin_error:
		kfree(data);

	exit:
		return status;
}




static struct cs5435_54p_psu_data *cs5435_54p_psu_update_device(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct cs5435_54p_psu_data *data = i2c_get_clientdata(client);


	mutex_lock(&data->update_lock);


	if (time_after(jiffies, data->last_updated)) {
		int i, status;
		u8 command;
		struct reg_data_byte regs_byte[] = {
				{0x20, &data->vout_mode},
				{0x81, &data->fan_fault},
				{0x7d, &data->temp_fault},
		};
		struct reg_data_word regs_word[] = {
				{0x88, &data->v_in},
				{0x8b, &data->v_out},
				{0x89, &data->i_in},
				{0x8c, &data->i_out},
				{0x96, &data->p_out},
				{0x97, &data->p_in},
				{0x8d, &(data->temp_input[0])},
				{0x8e, &(data->temp_input[1])},
				{0x3b, &(data->fan_duty_cycle[0])},
				{0x90, &(data->fan_speed[0])},
		};
		data->valid = 1;

		dev_dbg(&client->dev, "start data update\n");

		/* one milliseconds from now */
		data->last_updated = jiffies + HZ / 1000;

		for (i = 0; i < ARRAY_SIZE(regs_byte); i++) {
			status = cs5435_54p_psu_read_byte(client,
							regs_byte[i].reg);
			if (status < 0) {
				dev_dbg(&client->dev, "reg %d, err %d\n",
					regs_byte[i].reg, status);
				*(regs_byte[i].value) = 0;
		        data->valid = 0;
			} else {
				*(regs_byte[i].value) = status;
			}
		}

		for (i = 0; i < ARRAY_SIZE(regs_word); i++)
		{
			status = cs5435_54p_psu_read_word(client,regs_word[i].reg);
			if (status < 0)
			{
				dev_dbg(&client->dev, "reg %d, err %d\n",
					regs_word[i].reg, status);
				*(regs_word[i].value) = 0;
		        data->valid = 0;
			}
			else
			{
				*(regs_word[i].value) = status;
			}
		}

		command = 0x99;		/* PSU mfr_id */
		status = cs5435_54p_psu_read_block(client, command,
		data->mfr_id, ARRAY_SIZE(data->mfr_id) - 1);
    	data->mfr_id[ARRAY_SIZE(data->mfr_id) - 1] = '\0';
    	if (status < 0) {
        	dev_dbg(&client->dev, "reg %d, err %d\n", command, status);
        	memset(data->mfr_id, 0, sizeof(data->mfr_id));
	        data->valid = 0;
    	}

		command = 0x9a;		/* PSU mfr_model */
		status = cs5435_54p_psu_read_block(client, command,
		data->mfr_model, ARRAY_SIZE(data->mfr_model) - 1);
    	data->mfr_model[ARRAY_SIZE(data->mfr_model) - 1] = '\0';
    	if (status < 0) {
        	dev_dbg(&client->dev, "reg %d, err %d\n", command, status);
        	memset(data->mfr_model, 0, sizeof(data->mfr_id));
        	data->valid = 0;
    	}

    	command = 0x9e;		/* PSU mfr_serial */
    	status = cs5435_54p_psu_read_block(client, command,
    	            data->mfr_serial, ARRAY_SIZE(data->mfr_serial) - 1);
    	data->mfr_serial[ARRAY_SIZE(data->mfr_serial) - 1] = '\0';
    	if (status < 0) {
        	dev_dbg(&client->dev, "reg %d, err %d\n", command, status);
        	memset(data->mfr_serial, 0, sizeof(data->mfr_id));
        	data->valid = 0;
   		}

		data->psu_is_present = strlen(data->mfr_id) > 1 ? 1:0;
		if(data->psu_is_present)
		{
			data->psu_is_good = ((data->fan_fault) || (data->temp_fault))? 0:1;
		}
		else
		{
		    data->valid = 0;
			data->psu_is_good = 0;
		}
	}

	mutex_unlock(&data->update_lock);

	return data;

}

/* sysfs attributes for hwmon */
static SENSOR_DEVICE_ATTR(psu_v_in, S_IRUGO, for_linear_data, NULL, PSU_V_IN);
static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, for_vout_data,   NULL, PSU_V_OUT);
static SENSOR_DEVICE_ATTR(psu_i_in, S_IRUGO, for_linear_data, NULL, PSU_I_IN);
static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, for_linear_data, NULL, PSU_I_OUT);
static SENSOR_DEVICE_ATTR(psu_p_in, S_IRUGO, for_linear_data, NULL, PSU_P_IN);
static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, for_linear_data, NULL, PSU_P_OUT);
static SENSOR_DEVICE_ATTR(psu_temp1_input,	S_IRUGO, for_linear_data,	NULL, PSU_TEMP1_INPUT);
static SENSOR_DEVICE_ATTR(psu_temp2_input,	S_IRUGO, for_linear_data,	NULL, PSU_TEMP2_INPUT);
static SENSOR_DEVICE_ATTR(psu_temp3_input,	S_IRUGO, for_linear_data,	NULL, PSU_TEMP3_INPUT);
static SENSOR_DEVICE_ATTR(psu_temp_fault,	S_IRUGO, for_temp_fault, 	NULL, PSU_TEMP_FAULT);
static SENSOR_DEVICE_ATTR(psu_temp_warning,	S_IRUGO, for_temp_warning, 	NULL, PSU_TEMP_WARN);
static SENSOR_DEVICE_ATTR(psu_fan1_fault,	S_IRUGO, for_fan_fault, 	NULL, PSU_FAN1_FAULT);
static SENSOR_DEVICE_ATTR(psu_fan1_warning,	S_IRUGO, for_fan_warning, 	NULL, PSU_FAN1_WARN);
static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, for_linear_data, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE);
static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, for_linear_data,	NULL, PSU_FAN1_SPEED);
static SENSOR_DEVICE_ATTR(psu_mfr_id, 	S_IRUGO, for_ascii, NULL, PSU_MFR_ID);
static SENSOR_DEVICE_ATTR(psu_mfr_model, 	S_IRUGO, for_ascii, NULL, PSU_MFR_MODEL);
static SENSOR_DEVICE_ATTR(psu_mfr_serial,	S_IRUGO, for_ascii, NULL, PSU_MFR_SERIAL);
static SENSOR_DEVICE_ATTR(psu_present,	S_IRUGO, for_status, NULL, PSU_PRESENT);
static SENSOR_DEVICE_ATTR(psu_power_good,	S_IRUGO, for_status, NULL, PSU_P_GOOD);



static struct attribute *cs5435_54p_psu_attributes[] = {
	&sensor_dev_attr_psu_v_in.dev_attr.attr,
	&sensor_dev_attr_psu_v_out.dev_attr.attr,
	&sensor_dev_attr_psu_i_in.dev_attr.attr,
	&sensor_dev_attr_psu_i_out.dev_attr.attr,
	&sensor_dev_attr_psu_p_in.dev_attr.attr,
	&sensor_dev_attr_psu_p_out.dev_attr.attr,
	&sensor_dev_attr_psu_temp1_input.dev_attr.attr,
	&sensor_dev_attr_psu_temp2_input.dev_attr.attr,
	&sensor_dev_attr_psu_temp3_input.dev_attr.attr,
	&sensor_dev_attr_psu_temp_fault.dev_attr.attr,
	&sensor_dev_attr_psu_temp_warning.dev_attr.attr,
	&sensor_dev_attr_psu_fan1_fault.dev_attr.attr,
	&sensor_dev_attr_psu_fan1_warning.dev_attr.attr,
	&sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr,
	&sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr,
	&sensor_dev_attr_psu_mfr_id.dev_attr.attr,
	&sensor_dev_attr_psu_mfr_model.dev_attr.attr,
	&sensor_dev_attr_psu_mfr_serial.dev_attr.attr,
	&sensor_dev_attr_psu_present.dev_attr.attr,
    &sensor_dev_attr_psu_power_good.dev_attr.attr,
	NULL
};

static const struct attribute_group cs5435_54p_psu_group = {
	.attrs = cs5435_54p_psu_attributes,
};


static int  psu_register_probe(struct i2c_client *client,
				const struct i2c_device_id *id)
{
	int status;


	struct cs5435_54p_psu_data *data;

	if (!psu_i2c_check_functionality(client)) {
		status = -EIO;
		goto exit;
	}

	data = kzalloc(sizeof(*data), GFP_KERNEL);
	if (!data) {
		status = -ENOMEM;
		goto exit;
	}

	i2c_set_clientdata(client, data);
	data->valid = 0;
	mutex_init(&data->update_lock);

	/* Register sysfs hooks */
	status = sysfs_create_group(&client->dev.kobj, &cs5435_54p_psu_group);
	if (status)
			goto exit_sysfs_create_group;

	cs5435_54p_sysfs_add_client(client);

	data->hwmon_dev = hwmon_device_register(&client->dev);
	if (IS_ERR(data->hwmon_dev)) {
		status = PTR_ERR(data->hwmon_dev);
		goto exit_hwmon_device_register;
	}

	/* init eeprom */

	return 0;

	exit_hwmon_device_register:
		sysfs_remove_group(&client->dev.kobj, &cs5435_54p_psu_group);
	exit_sysfs_create_group:
		kfree(data);
	exit:
		return status;

}


static int cs5435_54p_psu_probe(struct i2c_client *client,
				const struct i2c_device_id *id)
{
	int status;

	if((client->addr == 0x52) ||(client->addr == 0x53))
	{
		status = psu_eeprom_probe(client, id);
	}
	else if((client->addr == 0x5a) ||(client->addr == 0x5b))
	{
		status = psu_register_probe(client, id);
	}
	return status;
}

static int cs5435_54p_psu_remove(struct i2c_client *client)
{
	cs5435_54p_sysfs_remove_client(client);

	if((client->addr == 0x52) ||(client->addr == 0x53))
	{
		struct cs5435_54p_psu_data *data;
		data = i2c_get_clientdata(client);
		psu_sysfs_eeprom_cleanup(&client->dev.kobj,data->bin);
		kfree(data);
	}
	else if((client->addr == 0x5a) ||(client->addr == 0x5b))
	{
		struct cs5435_54p_psu_data *data;
		data = i2c_get_clientdata(client);
		hwmon_device_unregister(data->hwmon_dev);
		sysfs_remove_group(&client->dev.kobj, &cs5435_54p_psu_group);
		kfree(data);
	}

	return 0;
}

enum psu_index
{
    cs5435_54p_psu1,
    cs5435_54p_psu2
};

static const struct i2c_device_id cs5435_54p_psu_id[] = {
    { "cs5435_54p_psu1", cs5435_54p_psu1 },
    { "cs5435_54p_psu2", cs5435_54p_psu2 },
    {}
};
MODULE_DEVICE_TABLE(i2c, cs5435_54p_psu_id);

static struct i2c_driver cs5435_54p_psu_driver = {
    .class        = I2C_CLASS_HWMON,
    .driver = {
        .name     = "cs5435_54p_psu",
    },
    .probe        = cs5435_54p_psu_probe,
    .remove       = cs5435_54p_psu_remove,
    .id_table     = cs5435_54p_psu_id,
    .address_list = normal_i2c,
};

module_i2c_driver(cs5435_54p_psu_driver);

MODULE_AUTHOR("Zhang Peng <zhangpeng@cigtech.com>");
MODULE_DESCRIPTION("cs5435_54p_psu driver");
MODULE_LICENSE("GPL");