# -*- coding: UTF-8 -*- # ------------------------------------------------------------------------------- # Name: Ragile python common module # Purpose: called by other modules # # Author: support # # Created: 02/07/2018 # Copyright: (c) rd 2018 # ------------------------------------------------------------------------------- ################################driver-load-adaption####################################################### # need to export interface ################################################################################################### __all__ = [ "fancontrol_loc", "fancontrol_config_loc", "GLOBALCONFIG", "MONITOR_CONST", "RAGILE_PART_NUMBER", "RAGILE_LABEL_REVISION", "RAGILE_ONIE_VERSION", "RAGILE_MAC_SIZE", "RAGILE_MANUF_NAME", "RAGILE_MANUF_COUNTRY", "RAGILE_VENDOR_NAME", "RAGILE_DIAG_VERSION", "RAGILE_SERVICE_TAG", "DEV_LEDS", "MEM_SLOTS", "LOCAL_LED_CONTROL", "FIRMWARE_TOOLS", "STARTMODULE", "i2ccheck_params", "FANS_DEF", "factest_module", "MONITOR_TEMP_MIN", "MONITOR_K", "MONITOR_MAC_IN", "MONITOR_DEFAULT_SPEED", "MONITOR_MAX_SPEED", "MONITOR_MIN_SPEED", "MONITOR_MAC_ERROR_SPEED", "MONITOR_FAN_TOTAL_NUM", "MONITOR_MAC_UP_TEMP", "MONITOR_MAC_LOWER_TEMP", "MONITOR_MAC_MAX_TEMP", "MONITOR_FALL_TEMP", "MONITOR_MAC_WARNING_THRESHOLD", "MONITOR_OUTTEMP_WARNING_THRESHOLD", "MONITOR_BOARDTEMP_WARNING_THRESHOLD", "MONITOR_CPUTEMP_WARNING_THRESHOLD", "MONITOR_INTEMP_WARNING_THRESHOLD", "MONITOR_MAC_CRITICAL_THRESHOLD", "MONITOR_OUTTEMP_CRITICAL_THRESHOLD", "MONITOR_BOARDTEMP_CRITICAL_THRESHOLD", "MONITOR_CPUTEMP_CRITICAL_THRESHOLD", "MONITOR_INTEMP_CRITICAL_THRESHOLD", "MONITOR_CRITICAL_NUM", "MONITOR_SHAKE_TIME", "MONITOR_INTERVAL", "MONITOR_MAC_SOURCE_SYSFS", "MONITOR_MAC_SOURCE_PATH", "MAC_AVS_PARAM", "MAC_DEFAULT_PARAM", "MONITOR_SYS_LED", "MONITOR_SYS_FAN_LED", "MONITOR_FANS_LED", "MONITOR_SYS_PSU_LED", "MONITOR_FAN_STATUS", "MONITOR_PSU_STATUS", "MONITOR_DEV_STATUS", "MONITOR_DEV_STATUS_DECODE", "DEV_MONITOR_PARAM", "SLOT_MONITOR_PARAM", "fanloc", "PCA9548START", "PCA9548BUSEND", "RAGILE_CARDID", "RAGILE_PRODUCTNAME", "FAN_PROTECT", "rg_eeprom", "E2_LOC", "E2_PROTECT", "MAC_LED_RESET", "INIT_PARAM", "INIT_COMMAND", "CPLDVERSIONS", "DRIVERLISTS", "DEVICE", "E2TYPE", "FRULISTS", "fanlevel_6510", "fanlevel_6520", "fanlevel", "TEMPIDCHANGE", "FACTESTMODULE", "item1", "test_sys_reload_item", "test_sys_item", "test_temp_item", "test_mem_item", "test_hd_item", "test_rtc_item", "test_i2c_item", "test_cpld_item", "test_portframe_item", "test_sysled_item", "test_fan_item", "test_power_item", "test_usb_item", "test_prbs_item", "test_portbroadcast_item", "test_debug_level", "test_log_level", "test_setmac", "test_setrtc", "log_level_critical", "log_level_debug", "log_level_error", "log_level_info", "log_level_notset", "log_level_warning", "test_e2_setmac_item", "test_bmc_setmac_item", "test_fan_setmac_item", "alltest", "looptest", "diagtestall", "menuList", "TESTCASE", "PCIe_DEV_LIST", "PCIe_SPEED_ITEM", ] fancontrol_loc = "/usr/local/bin" fancontrol_config_loc = "/usr/local/bin" GLOBALCONFIG = "GLOBALCONFIG" MONITOR_CONST = "MONITOR_CONST" RAGILE_PART_NUMBER = "RJ000001" RAGILE_LABEL_REVISION = "R01" RAGILE_ONIE_VERSION = "2018.02" RAGILE_MAC_SIZE = 3 RAGILE_MANUF_NAME = "Ragile" RAGILE_MANUF_COUNTRY = "CHN" RAGILE_VENDOR_NAME = "Ragile" RAGILE_DIAG_VERSION = "0.1.0.15" RAGILE_SERVICE_TAG = "www.ragile.com" DEV_LEDS = {} MEM_SLOTS = [] LOCAL_LED_CONTROL = {"CLOSE": {}, "OPEN": {}} FIRMWARE_TOOLS = {} # start-up module STARTMODULE = {"fancontrol": 1, "avscontrol": 1} i2ccheck_params = {"busend": "i2c-66", "retrytime": 6} ################################################################################################### ##### fan board ID reference ################################################################################################### FANS_DEF = { 0x8100: "M6500-FAN-F", 0x8101: "M6510-FAN-F", 0x8102: "M6520-FAN-F", 0x8103: "M6510-FAN-R", } factest_module = { "sysinfo_showfanmsg": 1, "sysinfo_showPsumsg": 1, "sysinfo_showrestfanmsg": 0, "sysinfo_showrestpsumsg": 0, } #################fan adjustment parameters ############################## MONITOR_TEMP_MIN = 38 # temperature before speed-adjustment MONITOR_K = 11 # adjustment algorithm MONITOR_MAC_IN = 35 # temperature difference between mac and chip(backup) MONITOR_DEFAULT_SPEED = 0x60 # default speed MONITOR_MAX_SPEED = 0xFF # maximum speed MONITOR_MIN_SPEED = 0x33 # minimum speed MONITOR_MAC_ERROR_SPEED = 0xBB # MAC abnormal speed MONITOR_FAN_TOTAL_NUM = 4 # 3+1 redundancy design, report to syslog if there is a error MONITOR_MAC_UP_TEMP = 50 # MAC compared with inlet up MONITOR_MAC_LOWER_TEMP = -50 # MAC compared with outlet down MONITOR_MAC_MAX_TEMP = 100 # MONITOR_FALL_TEMP = 4 # adjustment reduced temperature MONITOR_MAC_WARNING_THRESHOLD = 100 # 100 MONITOR_OUTTEMP_WARNING_THRESHOLD = 85 MONITOR_BOARDTEMP_WARNING_THRESHOLD = 85 MONITOR_CPUTEMP_WARNING_THRESHOLD = 85 MONITOR_INTEMP_WARNING_THRESHOLD = 70 # 70 MONITOR_MAC_CRITICAL_THRESHOLD = 105 # 105 MONITOR_OUTTEMP_CRITICAL_THRESHOLD = 90 # 90 MONITOR_BOARDTEMP_CRITICAL_THRESHOLD = 90 # 90 MONITOR_CPUTEMP_CRITICAL_THRESHOLD = 100 # 100 MONITOR_INTEMP_CRITICAL_THRESHOLD = 80 # 80 MONITOR_CRITICAL_NUM = 3 # retry times MONITOR_SHAKE_TIME = 20 # anti-shake times MONITOR_INTERVAL = 60 # 1 get mac temperature from sysfs ,0 get mac temperature from bcmcmd MONITOR_MAC_SOURCE_SYSFS = (0) MONITOR_MAC_SOURCE_PATH = None # sysfs path MAC_AVS_PARAM = { 0x72: 0x0384, 0x73: 0x037E, 0x74: 0x0378, 0x75: 0x0372, 0x76: 0x036B, 0x77: 0x0365, 0x78: 0x035F, 0x79: 0x0359, 0x7A: 0x0352, 0x7B: 0x034C, 0x7C: 0x0346, 0x7D: 0x0340, 0x7E: 0x0339, 0x7F: 0x0333, 0x80: 0x032D, 0x81: 0x0327, 0x82: 0x0320, 0x83: 0x031A, 0x84: 0x0314, 0x85: 0x030E, 0x86: 0x0307, 0x87: 0x0301, 0x88: 0x02FB, 0x89: 0x02F5, 0x8A: 0x02EE, } # default 6520 configuration MAC_DEFAULT_PARAM = { "type": 1, # type 1 represents default if out of range / 0 represents no voltage-adjustment if out of range "default": 0x74, # should be used with type "loopaddr": 0x00, # AVS loop address "loop": 0x00, # AVS loop value "open": 0x00, # diasble write-protection value "close": 0x40, # enable write-protection value "bus": 2, # AVSI2C bus address "devno": 0x60, # AVS address "addr": 0x21, # AVS voltage-adjustment address "protectaddr": 0x10, # AVS write-protection address "sdkreg": "DMU_PCU_OTP_CONFIG_8", # SDK register name "sdktype": 1, # type 0 represents no shift operation / 1 represents shift operation "macregloc": 24, # shift operation "mask": 0xFF, # mask after shift } MONITOR_SYS_LED = [ {"bus": 2, "devno": 0x33, "addr": 0xB2, "yellow": 0x06, "red": 0x02, "green": 0x04}, {"bus": 2, "devno": 0x32, "addr": 0x72, "yellow": 0x06, "red": 0x02, "green": 0x04}, ] MONITOR_SYS_FAN_LED = [ {"bus": 2, "devno": 0x33, "addr": 0xB4, "yellow": 0x06, "red": 0x02, "green": 0x04}, ] MONITOR_FANS_LED = [ {"bus": 2, "devno": 0x32, "addr": 0x23, "green": 0x09, "red": 0x0A}, {"bus": 2, "devno": 0x32, "addr": 0x24, "green": 0x09, "red": 0x0A}, {"bus": 2, "devno": 0x32, "addr": 0x25, "green": 0x09, "red": 0x0A}, {"bus": 2, "devno": 0x32, "addr": 0x26, "green": 0x09, "red": 0x0A}, ] MONITOR_SYS_PSU_LED = [ {"bus": 2, "devno": 0x33, "addr": 0xB3, "yellow": 0x06, "red": 0x02, "green": 0x04}, ] MONITOR_FAN_STATUS = [ {"status": "green", "minOkNum": 4, "maxOkNum": 4}, {"status": "yellow", "minOkNum": 3, "maxOkNum": 3}, {"status": "red", "minOkNum": 0, "maxOkNum": 2}, ] MONITOR_PSU_STATUS = [ {"status": "green", "minOkNum": 2, "maxOkNum": 2}, {"status": "yellow", "minOkNum": 1, "maxOkNum": 1}, {"status": "red", "minOkNum": 0, "maxOkNum": 0}, ] MONITOR_DEV_STATUS = {} MONITOR_DEV_STATUS_DECODE = {} DEV_MONITOR_PARAM = {} SLOT_MONITOR_PARAM = {} fanloc = {"name": "fanset", "location": "0-0032/fan_speed_set"} #####################MAC-Voltage-Adjustment-Parameters#################################### ####================================Adaption-Area================================ #### RAGILE_COMMON common configuration head #### "platform" specific configuration head #### PCA9548START = 11 PCA9548BUSEND = 74 RAGILE_CARDID = 0x00004040 RAGILE_PRODUCTNAME = "ragile_ra-b6510" FAN_PROTECT = {"bus": 0, "devno": 0x32, "addr": 0x19, "open": 0x00, "close": 0x0F} rg_eeprom = "2-0057/eeprom" E2_LOC = {"bus": 2, "devno": 0x57} E2_PROTECT = {"bus": 2, "devno": 0x33, "addr": 0xB0, "open": 0, "close": 1} MAC_LED_RESET = {"pcibus": 8, "slot": 0, "fn": 0, "bar": 0, "offset": 64, "reset": 0x98} INIT_PARAM = [ {"loc": "1-0034/sfp_enable", "value": "01"}, {"loc": "2-0035/sfp_enable2", "value": "ff"}, {"loc": "2-0033/mac_led", "value": "ff"}, {"loc": "1-0034/sfp_txdis1", "value": "00"}, {"loc": "1-0034/sfp_txdis2", "value": "00"}, {"loc": "1-0034/sfp_txdis3", "value": "00"}, {"loc": "1-0036/sfp_txdis4", "value": "00"}, {"loc": "1-0036/sfp_txdis5", "value": "00"}, {"loc": "1-0036/sfp_txdis6", "value": "00"}, {"loc": fanloc["location"], "value": "80"}, ] INIT_COMMAND = [] CPLDVERSIONS = [ {"loc": "2-0033/cpld_version", "des": "MAC Board CPLDA"}, {"loc": "2-0035/cpld_version", "des": "MAC Board CPLDB"}, {"loc": "2-0037/cpld_version", "des": "CPU Board CPLD"}, ] ## Driver List ## DRIVERLISTS = [] DEVICE = [] """ DRIVERLISTS = [ "i2c_dev", "i2c_algo_bit", "i2c_gpio", "i2c_mux", "i2c_mux_pca9641", "i2c_mux_pca954x", # force_deselect_on_exit=1 "eeprom", "at24", "ragile_platform", "rg_cpld", "rg_fan", "rg_psu", "csu550", "rg_gpio_xeon", #IPMIdriver "ipmi_msghandler", "ipmi_devintf", "ipmi_si", ] DEVICE = [ {"name":"pca9641","bus":0 ,"loc":0x10 }, {"name":"pca9548","bus":2 ,"loc":0x70 }, {"name":"lm75","bus": 2, "loc":0x48 }, {"name":"lm75","bus": 2, "loc":0x49 }, {"name":"lm75","bus": 2, "loc":0x4a }, {"name":"24c02","bus":2 , "loc":0x57 }, {"name":"rg_cpld","bus":2 ,"loc":0x33 }, {"name":"rg_cpld","bus":2 ,"loc":0x35 }, {"name":"rg_cpld","bus":2 ,"loc":0x37 }, {"name":"pca9548","bus":1,"loc":0x70 }, {"name":"pca9548","bus":1,"loc":0x71 }, {"name":"pca9548","bus":1,"loc":0x72 }, {"name":"pca9548","bus":1,"loc":0x73 }, {"name":"pca9548","bus":1,"loc":0x74 }, {"name":"pca9548","bus":1,"loc":0x75 }, {"name":"pca9548","bus":1,"loc":0x76 }, {"name":"pca9548","bus":1,"loc":0x77 }, {"name":"rg_fan","bus":3,"loc":0x53 }, {"name":"rg_fan","bus":4,"loc":0x53 }, {"name":"rg_fan","bus":5,"loc":0x53 }, #{"name":"rg_fan","bus":6,"loc":0x53 }, #specific fan {"name":"rg_psu","bus":7 ,"loc":0x50 }, {"name":"csu550","bus":7 ,"loc":0x58 }, {"name":"rg_psu","bus":8 ,"loc":0x53 }, {"name":"csu550","bus":8 ,"loc":0x5b }, ] """ #####################FRU-Info-Adaption################################# E2TYPE = { "1": "tlveeprom", "2": "x86cpueeprom", "3": "bmceeprom", "4": "cpueeprom", "5": "maceeprom", "6": "sloteeprom", "7": "fanconnecteeprom", "8": "M1HFANI-F", "9": "M1HFANI-R", "A": "M2HFANI-F", "B": "M2HFANI-R", "C": "psu", } FRULISTS = [] ################################Manufacturing-Test-Adaption-Area####################################################### # need to export interface fanlevel_6510 = { "level": [51, 150, 255], "low_speed": [500, 7500, 17000], "high_speed": [11000, 22500, 28500], } fanlevel_6520 = { "level": [75, 150, 255], "low_speed": [750, 4250, 6750], "high_speed": [4500, 7500, 10000], } fanlevel = fanlevel_6520 TEMPIDCHANGE = { "lm75in": "inlet", "lm75out": "outlet", "lm75hot": "hot-point", "inlet": "lm75in", "outlet": "lm75out", "hot-point": "lm75hot", } # Manufacturing-Test module FACTESTMODULE = {} ##################################Manufacturing-Test-Menu item1 = {"name": "Single Test", "deal": "test_signal", "childid": 1} test_sys_reload_item = {"name": "reset-system", "deal": "test_sys_reload"} test_sys_item = {"name": "Product information test", "deal": "test_sysinfo"} test_temp_item = {"name": "temperature test", "deal": "test_tempinfo"} test_mem_item = {"name": "Memory test", "deal": "test_cpumemoryinfo"} test_hd_item = {"name": "Hard disk test", "deal": "test_hard"} test_rtc_item = {"name": "RTC test ", "deal": "test_rtc"} test_i2c_item = {"name": "I2c test ", "deal": "test_i2c"} test_cpld_item = {"name": "CPLD test", "deal": "test_cpld"} test_portframe_item = { "name": "Port transmit-receive frame test", "deal": "test_portframe", } test_sysled_item = {"name": "System led test", "deal": "test_led"} test_fan_item = {"name": "Fan status test", "deal": "test_fan"} test_power_item = {"name": "PSU status test", "deal": "test_power"} test_usb_item = {"name": "USB test", "deal": "test_usb"} test_prbs_item = {"name": "PRBS test", "deal": "test_prbs"} test_portbroadcast_item = {"name": "Port broadcast", "deal": "test_portbroadcast"} test_debug_level = {"name": "Change debug level", "deal": "test_setdebug"} test_log_level = {"name": "Log output level", "deal": "test_loginfolevel"} test_setmac = {"name": "setmac", "deal": "test_setmac"} test_setrtc = {"name": "Set RTC", "deal": "test_set_rtc"} log_level_critical = {"name": "CRITICAL", "deal": "test_log_critical"} log_level_debug = {"name": "DEBUG", "deal": "test_log_debug"} log_level_error = {"name": "ERROR", "deal": "test_log_error"} log_level_info = {"name": "INFO", "deal": "test_log_info"} log_level_notset = {"name": "NOTSET", "deal": "test_log_notset"} log_level_warning = {"name": "WARNING", "deal": "test_log_warning"} test_e2_setmac_item = {"name": "E2SETMAC", "deal": "test_e2_setmac"} test_bmc_setmac_item = {"name": "BMCSETMAC", "deal": "test_bmc_setmac"} test_fan_setmac_item = {"name": "fan SETMAC", "deal": "test_fan_setmac"} alltest = [ test_sys_item, test_temp_item, test_mem_item, test_hd_item, test_rtc_item, test_i2c_item, test_cpld_item, test_portframe_item, test_sysled_item, test_fan_item, test_power_item, test_usb_item, test_prbs_item, test_portbroadcast_item, ] looptest = [ test_sys_item, test_temp_item, test_mem_item, test_hd_item, test_rtc_item, test_i2c_item, test_cpld_item, test_portframe_item, test_fan_item, test_power_item, test_usb_item, test_prbs_item, test_portbroadcast_item, ] diagtestall = [] menuList = [ { "menuid": 0, "value": [ {"name": "Single test", "deal": "test_signal", "childid": 1}, {"name": "All test", "deal": "test_all"}, {"name": "Loop test", "deal": "test_loop"}, # {"name":"Check loop-test result", "deal" :"test_loop_read"}, # {"name":"Delete loop-test result", "deal" :"test_loop_delete"}, # {"name":"Load configuration", "deal" :"test_config"}, test_sys_reload_item, {"name": "System Configuration", "deal": "test_sysconfig", "childid": 2}, ], }, { "menuid": 1, "parentid": 0, "value": [ test_sys_item, test_temp_item, test_mem_item, test_hd_item, test_rtc_item, test_i2c_item, test_cpld_item, test_portframe_item, test_sysled_item, test_fan_item, test_power_item, test_usb_item, test_prbs_item, test_portbroadcast_item, ], }, { "menuid": 2, "parentid": 0, "value": [test_debug_level, test_log_level, test_setmac, test_setrtc,], }, { "menuid": 3, "parentid": 2, "value": [ log_level_critical, log_level_debug, log_level_error, log_level_info, log_level_notset, log_level_warning, ], }, { "menuid": 4, "parentid": 2, "value": [test_e2_setmac_item, test_bmc_setmac_item, test_fan_setmac_item,], }, ] TESTCASE = { "CPLD": [ { "name": "CONNECT BOARD CPLD-A", "cases": [ {"name": "cpld32", "cmd": "grtd_test.py cpld_check 0 0x32 0xAA"}, {"name": "cpld37", "cmd": "grtd_test.py cpld_check 2 0x37 0xAC"}, ], }, { "name": "MAC BOARD CPLD-A", "cases": [ {"name": "cpld33", "cmd": "grtd_test.py cpld_check 2 0x33 0xAB"}, {"name": "cpld34", "cmd": "grtd_test.py cpld_check 1 0x34 0xAA"}, ], }, { "name": "MAC BOARD CPLD-B", "cases": [ {"name": "cpld36", "cmd": "grtd_test.py cpld_check 1 0x36 0xAA"}, {"name": "cpld35", "cmd": "grtd_test.py cpld_check 2 0x35 0xAB"}, ], }, ], "TEMPERATURE": [ { "name": "-->temperature test", "cases": [ { "name": "inlet", "cmd": "grtd_test.py temp 2-0048/hwmon/hwmon1/temp1_input", }, { "name": "outlet", "cmd": "grtd_test.py temp 2-0049/hwmon/hwmon2/temp1_input", }, { "name": "hot-point", "cmd": "grtd_test.py temp 2-004a/hwmon/hwmon3/temp1_input", }, ], } ], "MEMTORY": { "cases": [ {"name": "->memory test 1M", "cmd": "memtester 1M 1"}, {"name": "->memory test 2M", "cmd": "memtester 2M 1"}, {"name": "->memory test 8M", "cmd": "memtester 8M 1"}, # {"name":"->memory test 16M","cmd":"memtester 16M 1"}, # {"name":"->memory test 256M","cmd":"memtester 256M 1"}, ] }, "SMARTCTLCMDS": { "cases": [ {"name": "->Check Hard Disk Info", "cmd": "smartctl -i /dev/sda"}, {"name": "->Check Hard Disk Monitor Status", "cmd": "smartctl -H /dev/sda"}, ] }, "LED": [ { "name": "Light Port Led test", "cases": [ { "name": "-> Red Led Off", "cmd": "grtd_test.py led loc 1-0034/sfp_led1_red,1-0034/sfp_led2_red,1-0034/sfp_led3_red,1-0034/sfp_led8_red,1-0036/sfp_led4_red,1-0036/sfp_led5_red,1-0036/sfp_led6_red,1-0036/sfp_led7_red 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00", }, { "name": "-> Red Led On", "cmd": "grtd_test.py led loc 1-0034/sfp_led1_red,1-0034/sfp_led2_red,1-0034/sfp_led3_red,1-0034/sfp_led8_red,1-0036/sfp_led4_red,1-0036/sfp_led5_red,1-0036/sfp_led6_red,1-0036/sfp_led7_red 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff", }, { "name": "-> Recovery Red Led Off", "cmd": "grtd_test.py led loc 1-0034/sfp_led1_red,1-0034/sfp_led2_red,1-0034/sfp_led3_red,1-0034/sfp_led8_red,1-0036/sfp_led4_red,1-0036/sfp_led5_red,1-0036/sfp_led6_red,1-0036/sfp_led7_red 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00", }, { "name": "-> Yellow Led Off", "cmd": "grtd_test.py led loc 1-0034/sfp_led1_yellow,1-0034/sfp_led2_yellow,1-0034/sfp_led3_yellow,1-0034/sfp_led8_yellow,1-0036/sfp_led4_yellow,1-0036/sfp_led5_yellow,1-0036/sfp_led6_yellow,1-0036/sfp_led7_yellow 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00", }, { "name": "-> Yellow Led On", "cmd": "grtd_test.py led loc 1-0034/sfp_led1_yellow,1-0034/sfp_led2_yellow,1-0034/sfp_led3_yellow,1-0034/sfp_led8_yellow,1-0036/sfp_led4_yellow,1-0036/sfp_led5_yellow,1-0036/sfp_led6_yellow,1-0036/sfp_led7_yellow 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff", }, { "name": "-> Recovery Yellow Led Off", "cmd": "grtd_test.py led loc 1-0034/sfp_led1_yellow,1-0034/sfp_led2_yellow,1-0034/sfp_led3_yellow,1-0034/sfp_led8_yellow,1-0036/sfp_led4_yellow,1-0036/sfp_led5_yellow,1-0036/sfp_led6_yellow,1-0036/sfp_led7_yellow 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00", }, ], }, { "name": "fan 1 Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x0b", }, { "name": "-> Red Led ", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x0a", }, { "name": "-> Green Led ", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x09", }, { "name": "-> Yellow Led ", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x08", }, { "name": "-> Red Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x0e", }, { "name": "-> Green Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x0d", }, { "name": "-> Yellow Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x0c", }, { "name": "-> Recovery Green Led ", "cmd": "grtd_test.py led loc 0-0032/fan0_led 0x09", }, ], }, { "name": "fan 2 Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x0b", }, { "name": "-> Red Led ", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x0a", }, { "name": "-> Green Led ", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x09", }, { "name": "-> Yellow Led ", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x08", }, { "name": "-> Red Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x0e", }, { "name": "-> Green Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x0d", }, { "name": "-> Yellow Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x0c", }, { "name": "-> Recovery Green Led ", "cmd": "grtd_test.py led loc 0-0032/fan1_led 0x09", }, ], }, { "name": "fan 3 Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x0b", }, { "name": "-> Red Led ", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x0a", }, { "name": "-> Green Led ", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x09", }, { "name": "-> Yellow Led ", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x08", }, { "name": "-> Red Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x0e", }, { "name": "-> Green Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x0d", }, { "name": "-> Yellow Led Flashing", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x0c", }, { "name": "-> Recovery Green Led ", "cmd": "grtd_test.py led loc 0-0032/fan2_led 0x09", }, ], }, { "name": "Front panel CPU Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x00", }, { "name": "-> Green Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x01", }, { "name": "-> Red Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x02", }, { "name": "-> Yellow Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x03", }, { "name": "-> Green Led 1/4sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x11", }, { "name": "-> Green Led 1/2sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x21", }, { "name": "-> Green Led 1sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x41", }, { "name": "-> Green Led 2sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x81", }, { "name": "-> Red Led 1/4sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x12", }, { "name": "-> Red Led 1/2sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x22", }, { "name": "-> Red Led 1sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x42", }, { "name": "-> Red Led 2sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x82", }, { "name": "-> Yellow Led 1/4sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x13", }, { "name": "-> Yellow Led 1/2sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x23", }, { "name": "-> Yellow Led 1sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x43", }, { "name": "-> Yellow Led 2sFlashing ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x83", }, { "name": "-> Recovery Green Led ", "cmd": "grtd_test.py led loc 2-0035/broad_front_cpu 0x01", }, ], }, { "name": "Front panel BMC Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x00", }, { "name": "-> Red Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x01", }, { "name": "-> Red Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x02", }, { "name": "-> Green Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x03", }, { "name": "-> Green Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x04", }, { "name": "-> Yellow Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x05", }, { "name": "-> Yellow Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x06", }, { "name": "-> Recovery Green Led ", "cmd": "grtd_test.py led loc 2-0035/broad_front_bmc 0x04", }, ], }, { "name": "Front panel location Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 2-0035/broad_front_lct 0xff", }, { "name": "-> LedOn", "cmd": "grtd_test.py led loc 2-0035/broad_front_lct 0xfe", }, { "name": "->Recovery LedOff", "cmd": "grtd_test.py led loc 2-0035/broad_front_lct 0xff", }, ], }, { "name": "Front panel pwr Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x00", }, { "name": "-> Red Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x01", }, { "name": "-> Red Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x02", }, { "name": "-> Green Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x03", }, { "name": "-> Green Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x04", }, { "name": "-> Yellow Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x05", }, { "name": "-> Yellow Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x06", }, { "name": "-> Recovery Green Led ", "cmd": "grtd_test.py led loc 2-0035/broad_front_pwr 0x04", }, ], }, { "name": "Front panel fan Led", "cases": [ { "name": "-> LedOff", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x00", }, { "name": "-> Red Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x01", }, { "name": "-> Red Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x02", }, { "name": "-> Green Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x03", }, { "name": "-> Green Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x04", }, { "name": "-> Yellow Led Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x05", }, { "name": "-> Yellow Led not Flashing", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x06", }, { "name": "-> Recovery Green Led ", "cmd": "grtd_test.py led loc 2-0035/broad_front_fan 0x04", }, ], }, ], "I2C": [ ####type 1 represents value obtained compated with value ####type 2 represents return True or False { "name": "I2C device test", "cases": [ { "name": " PCA9641 test", "cmd": "grtd_test.py dev_rd 0 10 0", "deal_type": 2, }, { "name": " cpld32 test", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " cpld33 test", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " cpld34 test", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " cpld35 test", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " cpld36 test", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " cpld37 test", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " inlet LM75", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " outlet LM75", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " hot-point LM75", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " EEPROM", "cmd": "grtd_test.py dev_rd 0 32 0", "deal_type": 2, }, { "name": " Port 1", "cmd": "grtd_test.py dev_rd 11 0050 0", "deal_type": 2, }, { "name": " Port 2", "cmd": "grtd_test.py dev_rd 12 0050 0", "deal_type": 2, }, { "name": " Port 3", "cmd": "grtd_test.py dev_rd 13 0050 0", "deal_type": 2, }, { "name": " Port 4", "cmd": "grtd_test.py dev_rd 14 0050 0", "deal_type": 2, }, { "name": " Port 5", "cmd": "grtd_test.py dev_rd 15 0050 0", "deal_type": 2, }, { "name": " Port 6", "cmd": "grtd_test.py dev_rd 16 0050 0", "deal_type": 2, }, { "name": " Port 7", "cmd": "grtd_test.py dev_rd 17 0050 0", "deal_type": 2, }, { "name": " Port 8", "cmd": "grtd_test.py dev_rd 18 0050 0", "deal_type": 2, }, { "name": " Port 9", "cmd": "grtd_test.py dev_rd 19 0050 0", "deal_type": 2, }, { "name": " Port 10", "cmd": "grtd_test.py dev_rd 20 0050 0", "deal_type": 2, }, { "name": " Port 11", "cmd": "grtd_test.py dev_rd 21 0050 0", "deal_type": 2, }, { "name": " Port 12", "cmd": "grtd_test.py dev_rd 22 0050 0", "deal_type": 2, }, { "name": " Port 13", "cmd": "grtd_test.py dev_rd 23 0050 0", "deal_type": 2, }, { "name": " Port 14", "cmd": "grtd_test.py dev_rd 24 0050 0", "deal_type": 2, }, { "name": " Port 15", "cmd": "grtd_test.py dev_rd 25 0050 0", "deal_type": 2, }, { "name": " Port 16", "cmd": "grtd_test.py dev_rd 26 0050 0", "deal_type": 2, }, { "name": " Port 17", "cmd": "grtd_test.py dev_rd 27 0050 0", "deal_type": 2, }, { "name": " Port 18", "cmd": "grtd_test.py dev_rd 28 0050 0", "deal_type": 2, }, { "name": " Port 19", "cmd": "grtd_test.py dev_rd 29 0050 0", "deal_type": 2, }, { "name": " Port 20", "cmd": "grtd_test.py dev_rd 30 0050 0", "deal_type": 2, }, { "name": " Port 21", "cmd": "grtd_test.py dev_rd 31 0050 0", "deal_type": 2, }, { "name": " Port 22", "cmd": "grtd_test.py dev_rd 32 0050 0", "deal_type": 2, }, { "name": " Port 23", "cmd": "grtd_test.py dev_rd 33 0050 0", "deal_type": 2, }, { "name": " Port 24", "cmd": "grtd_test.py dev_rd 34 0050 0", "deal_type": 2, }, { "name": " Port 25", "cmd": "grtd_test.py dev_rd 35 0050 0", "deal_type": 2, }, { "name": " Port 26", "cmd": "grtd_test.py dev_rd 36 0050 0", "deal_type": 2, }, { "name": " Port 27", "cmd": "grtd_test.py dev_rd 37 0050 0", "deal_type": 2, }, { "name": " Port 28", "cmd": "grtd_test.py dev_rd 38 0050 0", "deal_type": 2, }, { "name": " Port 29", "cmd": "grtd_test.py dev_rd 39 0050 0", "deal_type": 2, }, { "name": " Port 30", "cmd": "grtd_test.py dev_rd 40 0050 0", "deal_type": 2, }, { "name": " Port 31", "cmd": "grtd_test.py dev_rd 41 0050 0", "deal_type": 2, }, { "name": " Port 32", "cmd": "grtd_test.py dev_rd 42 0050 0", "deal_type": 2, }, { "name": " Port 33", "cmd": "grtd_test.py dev_rd 43 0050 0", "deal_type": 2, }, { "name": " Port 34", "cmd": "grtd_test.py dev_rd 44 0050 0", "deal_type": 2, }, { "name": " Port 35", "cmd": "grtd_test.py dev_rd 45 0050 0", "deal_type": 2, }, { "name": " Port 36", "cmd": "grtd_test.py dev_rd 46 0050 0", "deal_type": 2, }, { "name": " Port 37", "cmd": "grtd_test.py dev_rd 47 0050 0", "deal_type": 2, }, { "name": " Port 38", "cmd": "grtd_test.py dev_rd 48 0050 0", "deal_type": 2, }, { "name": " Port 39", "cmd": "grtd_test.py dev_rd 49 0050 0", "deal_type": 2, }, { "name": " Port 40", "cmd": "grtd_test.py dev_rd 50 0050 0", "deal_type": 2, }, { "name": " Port 41", "cmd": "grtd_test.py dev_rd 51 0050 0", "deal_type": 2, }, { "name": " Port 42", "cmd": "grtd_test.py dev_rd 52 0050 0", "deal_type": 2, }, { "name": " Port 43", "cmd": "grtd_test.py dev_rd 53 0050 0", "deal_type": 2, }, { "name": " Port 44", "cmd": "grtd_test.py dev_rd 54 0050 0", "deal_type": 2, }, { "name": " Port 45", "cmd": "grtd_test.py dev_rd 55 0050 0", "deal_type": 2, }, { "name": " Port 46", "cmd": "grtd_test.py dev_rd 56 0050 0", "deal_type": 2, }, { "name": " Port 47", "cmd": "grtd_test.py dev_rd 57 0050 0", "deal_type": 2, }, { "name": " Port 48", "cmd": "grtd_test.py dev_rd 58 0050 0", "deal_type": 2, }, { "name": " Port 49", "cmd": "grtd_test.py dev_rd 59 0050 0", "deal_type": 2, }, { "name": " Port 50", "cmd": "grtd_test.py dev_rd 60 0050 0", "deal_type": 2, }, { "name": " Port 51", "cmd": "grtd_test.py dev_rd 61 0050 0", "deal_type": 2, }, { "name": " Port 52", "cmd": "grtd_test.py dev_rd 62 0050 0", "deal_type": 2, }, { "name": " Port 53", "cmd": "grtd_test.py dev_rd 63 0050 0", "deal_type": 2, }, { "name": " Port 54", "cmd": "grtd_test.py dev_rd 64 0050 0", "deal_type": 2, }, { "name": " Port 55", "cmd": "grtd_test.py dev_rd 65 0050 0", "deal_type": 2, }, { "name": " Port 56", "cmd": "grtd_test.py dev_rd 66 0050 0", "deal_type": 2, }, { "name": " Port 57", "cmd": "grtd_test.py dev_rd 67 0050 0", "deal_type": 2, }, { "name": " Port 58", "cmd": "grtd_test.py dev_rd 68 0050 0", "deal_type": 2, }, { "name": " Port 59", "cmd": "grtd_test.py dev_rd 69 0050 0", "deal_type": 2, }, { "name": " Port 60", "cmd": "grtd_test.py dev_rd 70 0050 0", "deal_type": 2, }, { "name": " Port 61", "cmd": "grtd_test.py dev_rd 71 0050 0", "deal_type": 2, }, { "name": " Port 62", "cmd": "grtd_test.py dev_rd 72 0050 0", "deal_type": 2, }, { "name": " Port 63", "cmd": "grtd_test.py dev_rd 73 0050 0", "deal_type": 2, }, { "name": " Port 64", "cmd": "grtd_test.py dev_rd 74 0050 0", "deal_type": 2, }, ], }, ], } PCIe_DEV_LIST = [] PCIe_SPEED_ITEM = [] ################################Manufacturing-Test-Adaption-Area#######################################################