os=unix
bcm_stat_flags=0
parity_enable=0
parity_correction=0

l2_mem_entries=163840
l3_mem_entries=81920
mmu_lossless=0
lls_num_l2uc=12
module_64ports=0

#SFI
serdes_if_type=9

port_init_cl72=0
phy_an_c73=5 # TSCMOD_CL73_CL37

#sdk6.5.5 only supports 156(default) or 125
#xgxs_lcpll_xtal_refclk=1
tslam_dma_enable=1
table_dma_enable=1

#for 72 ports with 48 10G ports and 6 40G ports for breakout mode
pbmp_oversubscribe=0x1fffffffffffffffffe
pbmp_xport_xe=0x1fffffffffffffffffe

rate_ext_mdio_divisor=96

#SFP+ 1-4 from WC3
portmap_1=13:10
portmap_2=14:10
portmap_3=15:10
portmap_4=16:10

#SFP+ 5-8 from WC5
portmap_5=21:10
portmap_6=22:10
portmap_7=23:10
portmap_8=24:10

#SFP+ 9-12 from WC6
portmap_9=25:10
portmap_10=26:10
portmap_11=27:10
portmap_12=28:10

#SFP+ 13-16 from WC7
portmap_13=29:10
portmap_14=30:10
portmap_15=31:10
portmap_16=32:10

#SFP+ 17-20 from WC11
portmap_17=45:10
portmap_18=46:10
portmap_19=47:10
portmap_20=48:10

#SFP+ 21-24 from WC12
portmap_21=49:10
portmap_22=50:10
portmap_23=51:10
portmap_24=52:10

#SFP+ 25-28 from WC13
portmap_25=53:10
portmap_26=54:10
portmap_27=55:10
portmap_28=56:10

#SFP+ 29-32 from WC14
portmap_29=57:10
portmap_30=58:10
portmap_31=59:10
portmap_32=60:10

#SFP+ 33-36 from WC15
portmap_33=61:10
portmap_34=62:10
portmap_35=63:10
portmap_36=64:10

#SFP+ 37-40 from WC16
portmap_37=65:10
portmap_38=66:10
portmap_39=67:10
portmap_40=68:10

#SFP+ 41-44 from WC17
portmap_41=69:10
portmap_42=70:10
portmap_43=71:10
portmap_44=72:10

#SFP+ 45-48 from WC18
portmap_45=73:10
portmap_46=74:10
portmap_47=75:10
portmap_48=76:10

# QSFP+ 49/WC24/port 49
portmap_49=97:10
portmap_50=98:10
portmap_51=99:10
portmap_52=100:10

# QSFP+ 51/WC25/port 50
portmap_53=101:10
portmap_54=102:10
portmap_55=103:10
portmap_56=104:10

# QSFP+ 53/WC20/port 51
portmap_57=81:10
portmap_58=82:10
portmap_59=83:10
portmap_60=84:10

# QSFP+ 50/WC26/port 52
portmap_61=105:10
portmap_62=106:10
portmap_63=107:10
portmap_64=108:10

# QSFP+ 52/WC27/port 53
portmap_65=109:10
portmap_66=110:10
portmap_67=111:10
portmap_68=112:10

# QSFP+ 54/WC19/port 54
portmap_69=77:10
portmap_70=78:10
portmap_71=79:10
portmap_72=80:10

# L3 ECMP
# - In Trident2, VP LAGs share the same table as ECMP group table.
#   The first N entries are reserved for VP LAGs, where N is the value of the
#   config property "max_vp_lags". By default this was set to 256
l3_max_ecmp_mode=1
max_vp_lags=0

stable_size=0x2000000