#-----------------  SDK Feature Support --------------
[MPLS_SUPPORT]     = 1;
[APS_SUPPORT]      = 1;
[OAM_SUPPORT]      = 1;
[PTP_SUPPORT]      = 0;
[SYNCE_SUPPORT]    = 0;
[STACKING_SUPPORT] = 1;
[BPE_SUPPORT]      = 0;
[IPFIX_SUPPORT]    = 1;
[MONITOR_SUPPORT]  = 1;
[OVERLAY_SUPPORT]  = 1;
[EFD_SUPPORT]      = 1;
[FCOE_SUPPORT]     = 0;
[TRILL_SUPPORT]    = 0;
[WLAN_SUPPORT]     = 0;
[NPM_SUPPORT]      = 1;
[DOT1AE_SUPPORT]   = 1;
[SRV6_SUPPORT]     = 0;
[DTEL_SUPPORT]     = 1;
[FLEXE_SUPPORT]    = 0;
[FDBTOKEN_SUPPORT]   = 1;

#-----------------  Chip Init Parameter --------------
#Local chip number and global chip id
[Local chip_num] = 1
[Local chip0]    = 0
[Local chip1]    = 1
[Port_phy_mapping] = 1

#Cut through mode 0: Disable; 1:10/40/100G; 2:1/10/100G; 3:1/10/40G; other:Flex, refer to CUT_THROUGH_BITMAP
[CUT_THROUGH_SPEED]  = 0
#Flex cut through mode, speed enable by bitmap, refer to ctc_port_speed_t, Notice: 10M/100M/1G treat as the same speed
[CUT_THROUGH_BITMAP]  = 0

#Network cpu port
[CPU_NETWORK_PORT_EN] = 0
[CPU_NETWORK_PORT_ID] = 47

#Enable parity error and multi-bit ecc recover
[ECC_RECOVER_EN] = 0
[TCAM_SCAN_EN] = 0
[SDB_EN] = 0

#-----------------  KNET Init Parameter --------------
[KNET_EN] = 0

#-----------------  FTM Init Parameter --------------
#0: not use; 1: default; 2: layer3; 3: ipv6
[FTM Profile] = 0

#-----------------  Interrupt Init Parameter --------------
#0: pin, 1: msi
[Interrupt_mode] = 1

#-----------------  NextHop Init Parameter --------------
#0: SDK work in pizzbox (single chip system), 1: SDK work in multi-chip system
[Nexthop Edit Mode]       = 0
[External Nexthop Number] = 16384
[MPLS Tunnel Number]      = 1024
[H_ECMP_EN]               = 0

#-----------------  L2 Init Parameter --------------
[FDB Hw Learning] = 0
[Logic Port Num] = 1024
#0: 128 instance per port, 1: 64 instance per port, 2: 32 instance per port
[STP MODE] = 0
[MAX_FID_NUM] = 5120

#-----------------  Stats Init Parameter --------------
[STATS_QUEUE_DEQ_EN]    = 1
[STATS_QUEUE_DROP_EN]   = 1
[STATS_FLOW_POLICER_EN] = 1
[STATS_VLAN_EN]         = 0
[STATS_VRF_EN]          = 0
[STATS_POLICER_NUM]     = 1024
[STATS_PORT_EN]         = 0
[STATS_ECMP_EN]         = 0

#-----------------  BPE Init Parameter --------------
[BPE_BR_PORT_EXTENDER_EN]  = 0
[BPE_BR_UC_MAX_ECID]       = 1024
[BPE_BR_MC_MAX_ECID]       = 4096
[BPE_BR_PORT_BASE]         = 0

#-----------------  Ipuc Init Parameter --------------
#0: tcam use prefix 16; 1: tcam use prefix 8
[IPUC_TCAM_PREFIX_8] = 1

#-----------------  QoS Init Parameter --------------
#QoS policer number support 1K/2K/4K/8K, default 4K
[QOS_POLICER_NUM] = 4096
#qos queue mode 0: 8(basic)+1(cpu)
#qos queue mode  1: 8(basic)+1(span)+1(mcast)
[QOS_QUEUE_MODE] = 0
#QoS port extend queue number support 0/4, default 0
[QOS_PORT_EXT_QUEUE_NUM] = 0
#QoS CPU reason queue number support 128/64/32, default 128
[QOS_CPU_QUEUE_NUM] = 128
[QOS_INGRESS_VLAN_POLICER_NUM] = 0
[QOS_EGRESS_VLAN_POLICER_NUM] = 0
#QoS the max number of igs/egs reserve macro policer,which ACL entry support micro and macro at the same time
[QOS_INGRESS_MACRO_POLICER_NUM] = 0
[QOS_EGRESS_MACRO_POLICER_NUM] = 0
#QOS service queue mode, default 0,0:logic scr port + dstport enq 1:service id + dstport enq
[QOS_SERVICE_QUEUE_MODE] = 0
#mode 0:svc policer used for service policer
#mode 1:svc policer used for stormctl
[QOS_POLICER_SVC_MODE] = 0

#-----------------  Stacking Init Parameter --------------
#0: normal mode; 1: spine-leaf mode
[FABRIC MODE] = 0
[STACKING VERSION] = 1
#-----------------  LB hash Init Parameter --------------
#0: support 4 select num; 1: support 8 select num; only TM2 support mode 1
[LB_HASH_MODE] = 0