/* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #ifndef TRANSCEIVER_H #define TRANSCEIVER_H #include /* advanced features control */ #define TRANSVR_INFO_DUMP_ENABLE (1) #define TRANSVR_INFO_CACHE_ENABLE (1) #define TRANSVR_UEVENT_ENABLE (1) /* Transceiver type define */ #define TRANSVR_TYPE_UNKNOW_1 (0x00) #define TRANSVR_TYPE_UNKNOW_2 (0xff) #define TRANSVR_TYPE_SFP (0x03) /* Define for SFP, SFP+, SFP28 */ #define TRANSVR_TYPE_QSFP (0x0c) #define TRANSVR_TYPE_QSFP_PLUS (0x0d) #define TRANSVR_TYPE_QSFP_28 (0x11) #define TRANSVR_TYPE_UNPLUGGED (0xfa) /* Define for ERROR handle */ #define TRANSVR_TYPE_FAKE (0xfc) /* Define for ERROR handle */ #define TRANSVR_TYPE_INCONSISTENT (0xfd) /* Define for ERROR handle */ #define TRANSVR_TYPE_ERROR (0xfe) /* Define for ERROR handle */ /* Transceiver class for base info */ #define TRANSVR_CLASS_UNSPECIFIED (0) #define TRANSVR_CLASS_ERROR (-26001) #define TRANSVR_CLASS_1G (26001) #define TRANSVR_CLASS_10G (26011) #define TRANSVR_CLASS_25G (26021) #define TRANSVR_CLASS_40G (26041) #define TRANSVR_CLASS_100G (26101) #define TRANSVR_CLASS_NO_SPERARABLE (26901) #define TRANSVR_CLASS_EXTEND_COMP (26902) /* Transceiver class for Optical 1G */ #define TRANSVR_CLASS_OPTICAL (27000) #define TRANSVR_CLASS_OPTICAL_100 (27001) #define TRANSVR_CLASS_OPTICAL_1G (27002) #define TRANSVR_CLASS_OPTICAL_1G_AOC (27003) #define TRANSVR_CLASS_OPTICAL_1G_SX (27004) #define TRANSVR_CLASS_OPTICAL_1G_LX (27005) #define TRANSVR_CLASS_OPTICAL_1G_EX (27006) /* Transceiver class for Optical 10G */ #define TRANSVR_CLASS_OPTICAL_10G (27010) #define TRANSVR_CLASS_OPTICAL_10G_S_AOC (27011) #define TRANSVR_CLASS_OPTICAL_10G_S_SR (27012) #define TRANSVR_CLASS_OPTICAL_10G_S_LR (27013) #define TRANSVR_CLASS_OPTICAL_10G_S_ER (27014) #define TRANSVR_CLASS_OPTICAL_10G_Q_AOC (27015) #define TRANSVR_CLASS_OPTICAL_10G_Q_SR (27016) #define TRANSVR_CLASS_OPTICAL_10G_Q_LR (27017) #define TRANSVR_CLASS_OPTICAL_10G_Q_ER (27018) /* Transceiver class for Optical 25G */ #define TRANSVR_CLASS_OPTICAL_25G (27020) #define TRANSVR_CLASS_OPTICAL_25G_AOC (27021) #define TRANSVR_CLASS_OPTICAL_25G_SR (27022) #define TRANSVR_CLASS_OPTICAL_25G_LR (27023) #define TRANSVR_CLASS_OPTICAL_25G_ER (27024) /* Transceiver class for Optical 40G */ #define TRANSVR_CLASS_OPTICAL_40G (27040) #define TRANSVR_CLASS_OPTICAL_40G_AOC (27041) #define TRANSVR_CLASS_OPTICAL_40G_SR4 (27042) #define TRANSVR_CLASS_OPTICAL_40G_LR4 (27043) #define TRANSVR_CLASS_OPTICAL_40G_ER4 (27044) /* Transceiver class for Optical 100G */ #define TRANSVR_CLASS_OPTICAL_100G (27100) #define TRANSVR_CLASS_OPTICAL_100G_AOC (27101) #define TRANSVR_CLASS_OPTICAL_100G_SR4 (27102) #define TRANSVR_CLASS_OPTICAL_100G_LR4 (27103) #define TRANSVR_CLASS_OPTICAL_100G_ER4 (27104) #define TRANSVR_CLASS_OPTICAL_100G_PSM4 (27105) /* Transceiver class for Copper */ #define TRANSVR_CLASS_COPPER (28000) #define TRANSVR_CLASS_COPPER_L1_1G (28001) #define TRANSVR_CLASS_COPPER_L1_10G (28011) #define TRANSVR_CLASS_COPPER_L4_10G (28012) #define TRANSVR_CLASS_COPPER_L1_25G (28021) #define TRANSVR_CLASS_COPPER_L4_40G (28041) #define TRANSVR_CLASS_COPPER_L4_100G (28101) /* Transceiver class for Base-T */ #define TRANSVR_CLASS_BASE_T_1000 (29001) #define TRANSVR_CLASS_BASE_T_1000_up (29002) /* For uevent message */ #define TRANSVR_UEVENT_KEY_IF "IF_TYPE" #define TRANSVR_UEVENT_KEY_SP "IF_SPEED" #define TRANSVR_UEVENT_KEY_LANE "IF_LANE" #define TRANSVR_UEVENT_UNKNOW "UNKNOW" #define TRANSVR_IF_KR "KR" #define TRANSVR_IF_KR4 "KR4" #define TRANSVR_IF_SR "SR" #define TRANSVR_IF_SR4 "SR4" #define TRANSVR_IF_SFI "SFI" #define TRANSVR_IF_IF_GMII "GMII" #define TRANSVR_IF_IF_XGMII "XGMII" #define TRANSVR_IF_SP_100 "100" #define TRANSVR_IF_SP_1G "1000" #define TRANSVR_IF_SP_10G "10000" #define TRANSVR_IF_SP_25G "25000" #define TRANSVR_IF_SP_40G "40000" #define TRANSVR_IF_SP_100G "100000" /* Transceiver mode define */ #define TRANSVR_MODE_DIRECT (21000) #define TRANSVR_MODE_POLLING (21001) /* Transceiver state define * [Note] * 1. State is used to represent the state of "Transceiver" and "Object". * 2. State for different target has different means. The description as following: */ #define STATE_TRANSVR_CONNECTED (0) /* [Transvr]:Be plugged in. [Obj]:Link up, and work normally. */ #define STATE_TRANSVR_NEW (-100) /* [Transvr]:(Not used) [Obj]:Create */ #define STATE_TRANSVR_INIT (-101) /* [Transvr]:Be plugged in. [Obj]:Link up, and in initial process. */ #define STATE_TRANSVR_ISOLATED (-102) /* [Transvr]:Be plugged in. [Obj]:Isolate, and not provide service. */ #define STATE_TRANSVR_SWAPPED (-200) /* [Transvr]:Be plugged in. [Obj]:(Not used) */ #define STATE_TRANSVR_DISCONNECTED (-300) /* [Transvr]:Un-plugged. [Obj]:Link down, and not provide service. */ #define STATE_TRANSVR_UNEXCEPTED (-901) /* [Transvr]:Any [Obj]:Any, and not in expect case. */ /* Task state define */ #define STATE_T_TASK_WAIT (110) #define STATE_T_TASK_DONE (0) #define STATE_T_TASK_INIT (-110) #define STATE_T_TASK_FAIL (-410) /* Event for task handling */ #define EVENT_TRANSVR_TASK_WAIT (2101) #define EVENT_TRANSVR_TASK_DONE (0) #define EVENT_TRANSVR_TASK_FAIL (-2101) /* Event for initial handling */ #define EVENT_TRANSVR_INIT_UP (2201) #define EVENT_TRANSVR_INIT_DOWN (1) #define EVENT_TRANSVR_INIT_REINIT (-2201) #define EVENT_TRANSVR_INIT_FAIL (-2202) /* Event for others */ #define EVENT_TRANSVR_RELOAD_FAIL (-2301) #define EVENT_TRANSVR_EXCEP_INIT (-2401) #define EVENT_TRANSVR_EXCEP_UP (-2402) #define EVENT_TRANSVR_EXCEP_DOWN (-2403) #define EVENT_TRANSVR_EXCEP_SWAP (-2404) #define EVENT_TRANSVR_EXCEP_EXCEP (-2405) #define EVENT_TRANSVR_EXCEP_ISOLATED (-2406) #define EVENT_TRANSVR_I2C_CRASH (-2501) /* Transceiver error code define */ #define ERR_TRANSVR_UNINIT (-201) #define ERR_TRANSVR_UNPLUGGED (-202) #define ERR_TRANSVR_ABNORMAL (-203) #define ERR_TRANSVR_NOSTATE (-204) #define ERR_TRANSVR_NOTSUPPORT (-205) #define ERR_TRANSVR_BADINPUT (-206) #define ERR_TRANSVR_UPDATE_FAIL (-207) #define ERR_TRANSVR_RELOAD_FAIL (-208) #define ERR_TRANSVR_INIT_FAIL (-209) #define ERR_TRANSVR_UNDEFINED (-210) #define ERR_TRANSVR_TASK_FAIL (-211) #define ERR_TRANSVR_TASK_BUSY (-212) #define ERR_TRANSVR_UEVENT_FAIL (-213) #define ERR_TRANSVR_FUNC_DISABLE (-214) #define ERR_TRANSVR_I2C_CRASH (-297) #define ERR_TRNASVR_BE_ISOLATED (-298) #define ERR_TRANSVR_UNEXCPT (-299) /* For debug */ #define DEBUG_TRANSVR_INT_VAL (-99) #define DEBUG_TRANSVR_HEX_VAL (0xfe) #define DEBUG_TRANSVR_STR_VAL "ERROR" /* For system internal */ #define VAL_TRANSVR_COMID_ARREESS (0x50) #define VAL_TRANSVR_COMID_OFFSET (0x00) #define VAL_TRANSVR_EXTPHY_ADDR_56 (0x56) #define VAL_TRANSVR_8472_READY_ADDR (0x51) #define VAL_TRANSVR_8472_READY_PAGE (-1) #define VAL_TRANSVR_8472_READY_OFFSET (110) #define VAL_TRANSVR_8472_READY_BIT (0) #define VAL_TRANSVR_8472_READY_VALUE (0) #define VAL_TRANSVR_8472_READY_ABNORMAL (0xff) #define VAL_TRANSVR_8436_READY_ADDR (0x50) #define VAL_TRANSVR_8436_READY_PAGE (-1) #define VAL_TRANSVR_8436_READY_OFFSET (2) #define VAL_TRANSVR_8436_READY_BIT (0) #define VAL_TRANSVR_8436_READY_VALUE (0) #define VAL_TRANSVR_8436_READY_ABNORMAL (0xff) #define VAL_TRANSVR_8436_PWD_ADDR (0x50) #define VAL_TRANSVR_8436_PWD_PAGE (-1) #define VAL_TRANSVR_8436_PWD_OFFSET (123) #define VAL_TRANSVR_PAGE_FREE (-99) #define VAL_TRANSVR_PAGE_SELECT_OFFSET (127) #define VAL_TRANSVR_PAGE_SELECT_DELAY (5) #define VAL_TRANSVR_TASK_RETRY_FOREVER (-999) #define VAL_TRANSVR_FUNCTION_DISABLE (-1) #define STR_TRANSVR_SFP "SFP" #define STR_TRANSVR_QSFP "QSFP" #define STR_TRANSVR_QSFP_PLUS "QSFP+" #define STR_TRANSVR_QSFP28 "QSFP28" /* For transvr buf len */ #define LEN_TRANSVR_S_STR (16) #define LEN_TRANSVR_M_STR (32) #define LEN_TRANSVR_L_STR (64) /* Optical wavelength */ #define VAL_OPTICAL_WAVELENGTH_SR (850) #define VAL_OPTICAL_WAVELENGTH_LR (1310) #define VAL_OPTICAL_WAVELENGTH_ER (1550) /* BCM chip type define */ #define BCM_CHIP_TYPE_TRIDENT_2 (31001) /* Magnolia, Hudson32i, Spruce */ #define BCM_CHIP_TYPE_TOMAHAWK (31002) /* Redwood, Cypress, Sequoia */ #define BCM_CHIP_TYPE_TRIDENT_3 (31003) /* Maple */ #define BF_CHIP_TYPE_TOFINO (31011) /* Lavender */ /* Info from transceiver EEPROM */ struct eeprom_map_s { int addr_br; int page_br; int offset_br; int length_br; int addr_cdr; int page_cdr; int offset_cdr; int length_cdr; int addr_comp_rev; int page_comp_rev; int offset_comp_rev; int length_comp_rev; int addr_connector; int page_connector; int offset_connector; int length_connector; int addr_diag_type; int page_diag_type; int offset_diag_type; int length_diag_type; int addr_extbr; int page_extbr; int offset_extbr; int length_extbr; int addr_ext_id; int page_ext_id; int offset_ext_id; int length_ext_id; int addr_id; int page_id; int offset_id; int length_id; int addr_len_sm; int page_len_sm; int offset_len_sm; int length_len_sm; int addr_len_smf; int page_len_smf; int offset_len_smf; int length_len_smf; int addr_len_om1; int page_len_om1; int offset_len_om1; int length_len_om1; int addr_len_om2; int page_len_om2; int offset_len_om2; int length_len_om2; int addr_len_om3; int page_len_om3; int offset_len_om3; int length_len_om3; int addr_len_om4; int page_len_om4; int offset_len_om4; int length_len_om4; int addr_option; int page_option; int offset_option; int length_option; int addr_rate_id; int page_rate_id; int offset_rate_id; int length_rate_id; int addr_rx_am; int page_rx_am; int offset_rx_am; int length_rx_am; int addr_rx_em; int page_rx_em; int offset_rx_em; int length_rx_em; int addr_rx_los; int page_rx_los; int offset_rx_los; int length_rx_los; int addr_rx_power; int page_rx_power; int offset_rx_power; int length_rx_power; int addr_soft_rs0; int page_soft_rs0; int offset_soft_rs0; int length_soft_rs0; int addr_soft_rs1; int page_soft_rs1; int offset_soft_rs1; int length_soft_rs1; int addr_temp; int page_temp; int offset_temp; int length_temp; int addr_trancomp; int page_trancomp; int offset_trancomp; int length_trancomp; int addr_trancomp_ext; int page_trancomp_ext; int offset_trancomp_ext; int length_trancomp_ext; int addr_tx_bias; int page_tx_bias; int offset_tx_bias; int length_tx_bias; int addr_tx_disable; int page_tx_disable; int offset_tx_disable; int length_tx_disable; int addr_tx_eq; int page_tx_eq; int offset_tx_eq; int length_tx_eq; int addr_tx_fault; int page_tx_fault; int offset_tx_fault; int length_tx_fault; int addr_tx_power; int page_tx_power; int offset_tx_power; int length_tx_power; int addr_vendor_name; int page_vendor_name; int offset_vendor_name; int length_vendor_name; int addr_vendor_pn; int page_vendor_pn; int offset_vendor_pn; int length_vendor_pn; int addr_vendor_rev; int page_vendor_rev; int offset_vendor_rev; int length_vendor_rev; int addr_vendor_sn; int page_vendor_sn; int offset_vendor_sn; int length_vendor_sn; int addr_voltage; int page_voltage; int offset_voltage; int length_voltage; int addr_wavelength; int page_wavelength; int offset_wavelength; int length_wavelength; }; struct transvr_worker_s; /* Class of transceiver object */ struct transvr_obj_s { /* ========== Object private property ========== * [Prop]: id * [Desc]: Type of serial transceiver. * [Note]: SFP:03h / QSFP:0Ch / QSPF+:0Dh /QSFP28:11h */ uint8_t id; /* [Prop]: connector * [Desc]: Connector type. * [Note]: SFP : A0h / 2 * QSFP: 00h / 130 */ uint8_t connector; /* [Prop]: transvr_comp * [Desc]: Transceiver compliance code. * [Note]: SFP: SFF-8472 * - Normal : A0h / offset 3-10 * - Extended: A0h / offset 36 * QSFP: SFF-8436 & SFF-8636 * - Normal : 00h / offset 131-138 * - Extended: 00h / offset 192 */ uint8_t transvr_comp[8]; uint8_t transvr_comp_ext; /* [Prop]: vendor_name * [Desc]: SFP vendor name (ASCII 16 byte char). * [Note]: ex:FINISAR CORP. */ char *vendor_name; /* [Prop]: vendor_pn * [Desc]: Part number provided by SFP vendor (ASCII 16 byte char). * [Note]: */ char *vendor_pn; /* [Prop]: vendor_rev * [Desc]: Revision level for part number provided by vendor (ASCII 4 byte char). * [Note]: */ char *vendor_rev; /* [Prop]: vendor_sn * [Desc]: Serial number provided by vendor (ASCII 16 byte char). * [Note]: */ char *vendor_sn; /* [Prop]: Extended identifier * [Desc]: SFP: * => None * * QSFP: * => This byte contained two information: * (1) Power consumption class * (2) CDR function present * [Note]: Bit description as below: * [SFP] * None * * [QSFP] * (1) Power consumption class: * Class 1: 1.5W (Bit6-7 = 00:) * Class 2: 2.0W (Bit6-7 = 01:) * Class 3: 2.5W (Bit6-7 = 10:) * Class 4: 3.5W (Bit6-7 = 11:) * Class 5: 4.0W (Bit0-1 = 01:) * Class 6: 4.5W (Bit0-1 = 10:) * Class 7: 5.0W (Bit0-1 = 11:) * (2) CDR function present: * Bit2: 0 = No CDR in RX * 1 = CDR present in RX * Bit3: 0 = No CDR in TX * 1 = CDR present in TX */ uint8_t ext_id; /* [Prop]: br * [Desc]: Nominal bit rate, units of 100 MBits/sec. * [Note]: SFP:03h / QSFP:0Ch / QSPF+:0Dh * has val: 0x67 * no val : */ uint8_t br; /* [Prop]: extbr * [Desc]: Extended br (00h/222) * [Desc]: Nominal bit rate per channel, units of 250 Mbps. * Complements. Byte 140. See Table 32A. */ uint8_t extbr; /* [Prop]: len_sm * [Desc]: Length (single mode)-(100's)m * [Note]: This value specifies the link length that is supported by the transceiver * while operating in compliance with the applicable standards using single mode * fiber. The value is in units of 100 meters. A value of 255 means that the * transceiver supports a link length greater than 25.4 km. A value of zero means * that the transceiver does not support single mode fiber or that the length * information must be determined from the transceiver technology. */ int len_sm; /* [Prop]: len_smf * [Desc]: Length (single mode)-km * [Note]: Addition to EEPROM data from original GBIC definition. This value specifies * the link length that is supported by the transceiver while operating in * compliance with the applicable standards using single mode fiber. The value * is in units of kilometers. A value of 255 means that the transceiver supports * a link length greater than 254 km. A value of zero means that the transceiver * does not support single mode fiber or that the length information must be * determined from the transceiver technology. */ int len_smf; /* [Prop]: len_om1 * [Desc]: Link length supported for 62.5 um OM1 fiber, units of 10 m * [Note]: The value is in units of 10 meters. A value of 255 means that the * transceiver supports a link length greater than 2.54 km. A value of * zero means that the transceiver does not support 50 micron multi-mode * fiber or that the length information must be determined from the transceiver * technology. */ int len_om1; /* [Prop]: len_om2 * [Desc]: Link length supported for 50 um OM2 fiber, units of 10 m * [Note]: The value is in units of 10 meters. A value of 255 means that the * transceiver supports a link length greater than 2.54 km. A value of * zero means that the transceiver does not support 50 micron multi-mode * fiber or that the length information must be determined from the transceiver * technology. */ int len_om2; /* [Prop]: len_om3 * [Desc]: Length (50um, OM3) * [Note]: This value specifies link length that is supported by the transceiver while * operating in compliance with applicable standards using 50 micron multimode * OM3 [2000 MHz*km] fiber. The value is in units of 10 meters. A value of 255 * means that the transceiver supports a link length greater than 2.54 km. A value * of zero means that the transceiver does not support 50 micron multimode fiber * or that the length information must be determined from the transceiver technology. */ int len_om3; /* [Prop]: len_om4 * [Desc]: Length (50um, OM4) and Length (Active Cable or Copper) * [Note]: For optical links, this value specifies link length that is supported by the * transceiver while operating in compliance with applicable standards using 50 micron * multimode OM4 [4700 MHz*km] fiber. The value is in units of 10 meters. A value of * 255 means that the transceiver supports a link length greater than 2.54 km. A value * of zero means that the transceiver does not support 50 micron multimode fiber or that * the length information must be determined from the transceiver codes specified in Table 5-3. * * For copper links, this value specifies minimum link length supported by the transceiver * while operating in compliance with applicable standards using copper cable. For active * cable, this value represents actual length. The value is in units of 1 meter. A value of 255 * means the transceiver supports a link length greater than 254 meters. A value of zero means * the transceiver does not support copper or active cables or the length information must be * determined from transceiver technology. Further information about cable design, equalization, * and connectors is usually required to guarantee meeting a particular length requirement. */ int len_om4; /* [Prop]: comp_rev * [Desc]: SFF spec revision compliance * [Note]: Indicates which revision of SFF SFF-8472 (SFP) / SFF-8636 (QSFP) the transceiver * complies with. (unsigned integer) */ uint8_t comp_rev; /* [Prop]: CDR * [Desc]: For transceivers with CDR capability, setting the CDR to ON engages the internal * retiming function. Setting the CDR to OFF enables an internal bypassing mode ,which * directs traffic around the internal CDR. (Reference: SFF-8636) * [Note]: value=0xff: ON. * value=0x00: OFF. */ uint8_t cdr; /* [Prop]: rate_id * [Desc]: Soft Rate Select 0(RX). * [Note]: 1. Addr: A0h / Offset: 13 * 2. Value description: * 00h Unspecified * 01h SFF-8079 (4/2/1G Rate_Select & AS0/AS1) * 02h SFF-8431 (8/4/2G Rx Rate_Select only) * 03h Unspecified * * 04h SFF-8431 (8/4/2G Tx Rate_Select only) * 05h Unspecified * * 06h SFF-8431 (8/4/2G Independent Rx & Tx Rate_select) * 07h Unspecified * * 08h FC-PI-5 (16/8/4G Rx Rate_select only) High=16G only, Low=8G/4G * 09h Unspecified * * 0Ah FC-PI-5 (16/8/4G Independent Rx, Tx Rate_select) High=16G only, * Low=8G/4G * 0Bh Unspecified * * 0Ch FC-PI-6 (32/16/8G Independent Rx, Tx Rate_Select) * High=32G only, Low = 16G/8G * 0Dh Unspecified * * 0Eh 10/8G Rx and Tx Rate_Select controlling the operation or locking * modes of the internal signal conditioner, retimer or CDR, according * to the logic table defined in Table 10-2, High Bit Rate * (10G) =9.95-11.3 Gb/s; Low Bit Rate (8G) = 8.5 Gb/s. In this mode, * the default value of bit 110.3 (Soft Rate Select RS(0), Table 9-11) * and of bit 118.3 (Soft Rate Select RS(1), Table 10-1) is 1. * 0Fh Unspecified * * 10h-FFh Unallocated */ int rate_id; /* [Prop]: soft_rs0 * [Desc]: Soft Rate Select 0(RX). * [Note]: 1. Writing '1' selects full bandwidth operation. * 2. This bit is "OR'd with the hard Rate_Select, AS(0) or RS(0) pin value. * 3. Default at power up is logic zero/low * 4. Addr: A2h / Offset: 110 / Bit: 3 */ uint8_t soft_rs0; /* [Prop]: soft_rs1 * [Desc]: Soft Rate Select 1(TX). * [Note]: 1. Writing '1' selects full bandwidth TX operation. * 2. This bit is "OR'd with the hard Rate_Select, AS(1) or RS(1) pin value. * 3. Default at power up is logic zero/low * 4. Addr: A2h / Offset: 118 / Bit: 3 */ uint8_t soft_rs1; /* [Prop]: diag_type * [Desc]: DIAGNOSTIC MONITORING TYPE (A0h/92) * [Note]: Description in SFF-8472 as below: * Bit7: Reserved for legacy diagnostic implementations. Must be '0' for compliance * with this document. * Bit6: Digital diagnostic monitoring implemented (described in this document). * Must be '1' for compliance with this document. * Bit5 Internally calibrated * Bit4 Externally calibrated * Bit3 Received power measurement type.0 = OMA, 1 = average power * Bit2 Address change required see section above, "addressing modes" * Bit1-0 Unallocated */ uint8_t diag_type; /* [Prop]: curr_temp * [Desc]: Transceiver Current Temperature (A2h/96-97) * [Note]: 1. Dependent on diag_type. * 2. 96: High byte * 3. 97: Low byte * 4. This feature only for SFP */ uint8_t curr_temp[2]; /* [Prop]: curr_vol * [Desc]: Transceiver Current Voltage (SFP:A2h/108-109; QSFP:00h/22-23) * [Note]: 1. Dependent on diag_type. * 2. 98: High byte * 3. 99: Low byte * 4. This feature only for SFP * 5. Internally measured transceiver supply voltage. Represented * as a 16 bit unsigned integer with the voltage defined as the * full 16 bit value (0-65535) with LSB equal to 100 uVolt, * yielding a total range of 0 to +6.55 Volts */ uint8_t curr_voltage[2]; /* [Prop]: curr_tx_bias * [Desc]: Transceiver TX Bias Current (SFP:A2h/100-101; QSFP:00h/26-27) * [Note]: 1. Dependent on diag_type. * 2. 100: High byte * 3. 101: Low byte * 4. This feature only for SFP * 5. Measured TX bias current in uA. Represented as a 16 bit unsigned * integer with the current defined as the full 16 bit value (0-65535) * with LSB equal to 2 uA, yielding a total range of 0 to 131 mA. * Accuracy is vendor specific but must be better than 10% of the * manufacturer's nominal value over specified operating temperature * and voltage. */ uint8_t curr_tx_bias[8]; /* [Prop]: curr_tx_power * [Desc]: Transceiver TX Output Power (A2h/102-103) * [Note]: 1. Dependent on diag_type. * 2. 102: High byte * 3. 103: Low byte * 4. This feature only for SFP * 5. Measured TX output power in mW. Represented as a 16 bit unsigned * integer with the power defined as the full 16 bit value (0-65535) * with LSB equal to 0.1 uW, yielding a total range of 0 to 6.5535 mW * (~ -40 to +8.2 dBm). Data is assumed to be based on measurement of * laser monitor photodiode current. It is factory calibrated to absolute * units using the most representative fiber output type. Accuracy is * vendor specific but must be better than 3dB over specified temperature * and voltage. Data is not valid when the transmitter is disabled. */ uint8_t curr_tx_power[8]; /* [Prop]: curr_tx_power * [Desc]: Transceiver TX Output Power (A2h/102-103) * [Note]: 1. Dependent on diag_type. * 2. 102: High byte * 3. 103: Low byte * 4. This feature only for SFP * 5. Measured RX received optical power in mW. Value can represent either * average received power or OMA depending upon how bit 3 of byte 92 (A0h) * is set. Represented as a 16 bit unsigned integer with the power defined * as the full 16 bit value (0-65535) with LSB equal to 0.1 uW, yielding a * total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm). Absolute accuracy is * dependent upon the exact optical wavelength. For the vendor specified * wavelength, accuracy shall be better than 3dB over specified temperature * and voltage. */ uint8_t curr_rx_power[8]; /* [Prop]: wavelength * [Desc]: Wavelength or Copper Cable Attenuation * [Note]: (Following is info from SFF-8636) * For optical free side devices, this parameter identifies the nominal * transmitter output wavelength at room temperature. This parameter is a * 16-bit hex value with Byte 186 as high order byte and Byte 187 as low * order byte. The laser wavelength is equal to the 16-bit integer value * divided by 20 in nm (units of 0.05 nm). This resolution should be adequate * to cover all relevant wavelengths yet provide enough resolution for all * expected DWDM applications. For accurate representation of controlled * wavelength applications, this value should represent the center of the * guaranteed wavelength range. If the free side device is identified as * copper cable these registers will be used to define the cable attenuation. * An indication of 0 dB attenuation refers to the case where the attenuation * is not known or is unavailable. * Byte 186 (00-FFh) is the copper cable attenuation at 2.5 GHz in units of 1 dB. * Byte 187 (00-FFh) is the copper cable attenuation at 5.0 GHz in units of 1 dB. */ uint8_t wavelength[2]; /* [Prop]: Amplitude control * [Desc]: Amplitude control * [Note]: QSFP28 => SFF-8636 03H Byte-238/239 */ uint8_t rx_am[2]; /* [Prop]: Emphasis control * [Desc]: Emphasis control * [Note]: SFP+/28 => SFF-8472 A2H Byte-115 * QSFP28 => SFF-8636 03H Byte-236/237 */ uint8_t rx_em[2]; /* [Prop]: Soft Rx LOS * [Desc]: Soft Rx LOS which provide by transceiver * [Note]: (Following is info from SFF-8636) * Byte 3: * - Bit 0: L-Rx1 LOS * - Bit 1: L-Rx2 LOS * - Bit 2: L-Rx3 LOS * - Bit 3: L-Rx4 LOS */ uint8_t rx_los; /* [Prop]: Soft Tx Disable * [Desc]: Soft Tx Disable which provide by transceiver * [Note]: (Following is info from SFF-8636) * Byte 86: * - Bit 0: Tx1 Disable * - Bit 1: Tx2 Disable * - Bit 2: Tx3 Disable * - Bit 3: Tx4 Disable */ uint8_t tx_disable; /* [Prop]: Soft Tx Fault * [Desc]: Soft Tx Fault which provide by transceiver * [Note]: (Following is info from SFF-8636) * Byte 86: * - Bit 0: Tx1 Fault * - Bit 1: Tx2 Fault * - Bit 2: Tx3 Fault * - Bit 3: Tx4 Fault */ uint8_t tx_fault; /* [Prop]: Transceiver EQUALIZATION * [Desc]: Transceiver EQUALIZATION * [Note]: SFP+/28 => SFF-8472 A2H Byte-114 * QSFP28 => SFF-8636 03H Byte-234/235 */ uint8_t tx_eq[2]; /* [Prop]: OPTION VALUES * [Desc]: The bits in the option field shall specify the options implemented in the transceiver. * [Note]: SFP+/28 => SFF-8472 A0H Byte-64/65 * QSFP+/28 => SFF-8636 00H Byte-193/195 */ uint8_t option[3]; /* [Prop]: External PHY offset * [Desc]: It needs to be setup first if you want to access transceiver external phy. * [Note]: This feature dependent on transceiver. * Currently, only 1G-RJ45 transceiver supported it. */ uint8_t extphy_offset; /* ========== Object private property ========== */ struct device *transvr_dev_p; struct eeprom_map_s *eeprom_map_p; struct i2c_client *i2c_client_p; struct ioexp_obj_s *ioexp_obj_p; struct transvr_worker_s *worker_p; struct mutex lock; char swp_name[32]; int auto_config; int auto_tx_disable; int chan_id; int chipset_type; int curr_page; int info; int ioexp_virt_offset; int lane_id[8]; int layout; int mode; int retry; int state; int temp; int type; /* ========== Object public functions ========== */ int (*get_id)(struct transvr_obj_s *self); int (*get_ext_id)(struct transvr_obj_s *self); int (*get_connector)(struct transvr_obj_s *self); int (*get_vendor_name)(struct transvr_obj_s *self, char *buf_p); int (*get_vendor_pn)(struct transvr_obj_s *self, char *buf_p); int (*get_vendor_rev)(struct transvr_obj_s *self, char *buf_p); int (*get_vendor_sn)(struct transvr_obj_s *self, char *buf_p); int (*get_power_cls)(struct transvr_obj_s *self); int (*get_br)(struct transvr_obj_s *self); int (*get_len_sm)(struct transvr_obj_s *self); int (*get_len_smf)(struct transvr_obj_s *self); int (*get_len_om1)(struct transvr_obj_s *self); int (*get_len_om2)(struct transvr_obj_s *self); int (*get_len_om3)(struct transvr_obj_s *self); int (*get_len_om4)(struct transvr_obj_s *self); int (*get_comp_rev)(struct transvr_obj_s *self); int (*get_comp_eth_1)(struct transvr_obj_s *self); int (*get_comp_eth_10)(struct transvr_obj_s *self); int (*get_comp_eth_10_40)(struct transvr_obj_s *self); int (*get_comp_extend)(struct transvr_obj_s *self); int (*get_cdr)(struct transvr_obj_s *self); int (*get_rate_id)(struct transvr_obj_s *self); int (*get_soft_rs0)(struct transvr_obj_s *self); int (*get_soft_rs1)(struct transvr_obj_s *self); int (*get_info)(struct transvr_obj_s *self); int (*get_if_type)(struct transvr_obj_s *self, char *buf_p); int (*get_if_speed)(struct transvr_obj_s *self, char *buf_p); int (*get_if_lane)(struct transvr_obj_s *self, char *buf_p); int (*get_curr_temp)(struct transvr_obj_s *self, char *buf_p); int (*get_curr_vol)(struct transvr_obj_s *self, char *buf_p); int (*get_soft_rx_los)(struct transvr_obj_s *self, char *buf_p); int (*get_soft_tx_disable)(struct transvr_obj_s *self, char *buf_p); int (*get_soft_tx_fault)(struct transvr_obj_s *self, char *buf_p); int (*get_auto_tx_disable)(struct transvr_obj_s *self, char *buf_p); int (*get_tx_bias)(struct transvr_obj_s *self, char *buf_p); int (*get_tx_power)(struct transvr_obj_s *self, char *buf_p); int (*get_rx_power)(struct transvr_obj_s *self, char *buf_p); int (*get_tx_eq)(struct transvr_obj_s *self, char *buf_p); int (*get_rx_am)(struct transvr_obj_s *self, char *buf_p); int (*get_rx_em)(struct transvr_obj_s *self, char *buf_p); int (*get_wavelength)(struct transvr_obj_s *self, char *buf_p); int (*get_extphy_offset)(struct transvr_obj_s *self, char *buf_p); int (*get_extphy_reg)(struct transvr_obj_s *self, char *buf_p); int (*set_cdr)(struct transvr_obj_s *self, int input_val); int (*set_soft_rs0)(struct transvr_obj_s *self, int input_val); int (*set_soft_rs1)(struct transvr_obj_s *self, int input_val); int (*set_soft_tx_disable)(struct transvr_obj_s *self, int input_val); int (*set_auto_tx_disable)(struct transvr_obj_s *self, int input_val); int (*set_tx_eq)(struct transvr_obj_s *self, int input_val); int (*set_rx_am)(struct transvr_obj_s *self, int input_val); int (*set_rx_em)(struct transvr_obj_s *self, int input_val); int (*set_extphy_offset)(struct transvr_obj_s *self, int input_val); int (*set_extphy_reg)(struct transvr_obj_s *self, int input_val); /* ========== Object private functions ========== */ int (*init)(struct transvr_obj_s *self); int (*clean)(struct transvr_obj_s *self); int (*check)(struct transvr_obj_s *self); int (*update_all)(struct transvr_obj_s *self, int show_err); int (*fsm_4_direct)(struct transvr_obj_s* self, char *caller_name); int (*fsm_4_polling)(struct transvr_obj_s* self, char *caller_name); int (*send_uevent)(struct transvr_obj_s* self, enum kobject_action u_action); int (*dump_all)(struct transvr_obj_s* self); }; /* For AVL Mapping */ struct transvr_avl_s { char vendor_name[32]; char vendor_pn[32]; int (*init)(struct transvr_obj_s *self); }; /* Worker for long term task of transceiver */ struct transvr_worker_s { /* Task Parameter */ struct transvr_obj_s *transvr_p; struct transvr_worker_s *next_p; struct transvr_worker_s *pre_p; unsigned long trigger_time; char func_name[64]; int retry; int state; /* Task private data */ void *p_data; /* Call back function */ int (*main_task)(struct transvr_worker_s *task); int (*post_task)(struct transvr_worker_s *task); }; struct transvr_obj_s * create_transvr_obj(char *swp_name, int chan_id, struct ioexp_obj_s *ioexp_obj_p, int ioexp_virt_offset, int transvr_type, int chipset_type, int run_mode); void lock_transvr_obj(struct transvr_obj_s *self); void unlock_transvr_obj(struct transvr_obj_s *self); int isolate_transvr_obj(struct transvr_obj_s *self); int resync_channel_tier_2(struct transvr_obj_s *self); void alarm_msg_2_user(struct transvr_obj_s *self, char *emsg); #endif /* TRANSCEIVER_H */