From f2dffe0f83a05dfbf0190316f0d260f7d7ff76a8 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 23 Jan 2023 21:38:24 +0200 Subject: [PATCH backport 5.10 181/182] Revert "mlxsw: thermal: Fix out-of-bounds memory accesses" This reverts commit e59d839743b50cb1d3f42a786bea48cc5621d254. --- .../ethernet/mellanox/mlxsw/core_thermal.c | 52 +++++++++++++++++-- 1 file changed, 47 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c index 529108aea3c6..88a2f63c8839 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c @@ -23,8 +23,16 @@ #define MLXSW_THERMAL_MODULE_TEMP_SHIFT (MLXSW_THERMAL_HYSTERESIS_TEMP * 2) #define MLXSW_THERMAL_TEMP_SCORE_MAX GENMASK(31, 0) #define MLXSW_THERMAL_MAX_STATE 10 -#define MLXSW_THERMAL_MIN_STATE 2 #define MLXSW_THERMAL_MAX_DUTY 255 +/* Minimum and maximum fan allowed speed in percent: from 20% to 100%. Values + * MLXSW_THERMAL_MAX_STATE + x, where x is between 2 and 10 are used for + * setting fan speed dynamic minimum. For example, if value is set to 14 (40%) + * cooling levels vector will be set to 4, 4, 4, 4, 4, 5, 6, 7, 8, 9, 10 to + * introduce PWM speed in percent: 40, 40, 40, 40, 40, 50, 60. 70, 80, 90, 100. + */ +#define MLXSW_THERMAL_SPEED_MIN (MLXSW_THERMAL_MAX_STATE + 2) +#define MLXSW_THERMAL_SPEED_MAX (MLXSW_THERMAL_MAX_STATE * 2) +#define MLXSW_THERMAL_SPEED_MIN_LEVEL 2 /* 20% */ /* External cooling devices, allowed for binding to mlxsw thermal zones. */ static char * const mlxsw_thermal_external_allowed_cdev[] = { @@ -656,16 +664,49 @@ static int mlxsw_thermal_set_cur_state(struct thermal_cooling_device *cdev, struct mlxsw_thermal *thermal = cdev->devdata; struct device *dev = thermal->bus_info->dev; char mfsc_pl[MLXSW_REG_MFSC_LEN]; + unsigned long cur_state, i; int idx; + u8 duty; int err; - if (state > MLXSW_THERMAL_MAX_STATE) - return -EINVAL; - idx = mlxsw_get_cooling_device_idx(thermal, cdev); if (idx < 0) return idx; + /* Verify if this request is for changing allowed fan dynamical + * minimum. If it is - update cooling levels accordingly and update + * state, if current state is below the newly requested minimum state. + * For example, if current state is 5, and minimal state is to be + * changed from 4 to 6, thermal->cooling_levels[0 to 5] will be changed + * all from 4 to 6. And state 5 (thermal->cooling_levels[4]) should be + * overwritten. + */ + if (state >= MLXSW_THERMAL_SPEED_MIN && + state <= MLXSW_THERMAL_SPEED_MAX) { + state -= MLXSW_THERMAL_MAX_STATE; + for (i = 0; i <= MLXSW_THERMAL_MAX_STATE; i++) + thermal->cooling_levels[i] = max(state, i); + + mlxsw_reg_mfsc_pack(mfsc_pl, idx, 0); + err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfsc), mfsc_pl); + if (err) + return err; + + duty = mlxsw_reg_mfsc_pwm_duty_cycle_get(mfsc_pl); + cur_state = mlxsw_duty_to_state(duty); + + /* If current fan state is lower than requested dynamical + * minimum, increase fan speed up to dynamical minimum. + */ + if (state < cur_state) + return 0; + + state = cur_state; + } + + if (state > MLXSW_THERMAL_MAX_STATE) + return -EINVAL; + /* Normalize the state to the valid speed range. */ state = thermal->cooling_levels[state]; mlxsw_reg_mfsc_pack(mfsc_pl, idx, mlxsw_state_to_duty(state)); @@ -1143,7 +1184,8 @@ int mlxsw_thermal_init(struct mlxsw_core *core, /* Initialize cooling levels per PWM state. */ for (i = 0; i < MLXSW_THERMAL_MAX_STATE; i++) - thermal->cooling_levels[i] = max(MLXSW_THERMAL_MIN_STATE, i); + thermal->cooling_levels[i] = max(MLXSW_THERMAL_SPEED_MIN_LEVEL, + i); thermal->polling_delay = bus_info->low_frequency ? MLXSW_THERMAL_SLOW_POLL_INT : -- 2.20.1