#!/bin/bash

board_ver=$(ipmitool raw 0x30 0x25 0x1 0xe0 0x1 0x0 1>/dev/null 2>/dev/null; echo $?) #error will get 1 means EVT, otherwise DVT

port_1_8_presence=0
port_9_16_presence=0
port_17_24_presence=0
port_25_32_presence=0
port_1_8_reset=0
port_9_16_reset=0
port_17_24_reset=0
port_25_32_reset=0
port_1_8_lpmode=0
port_9_16_lpmode=0
port_17_24_lpmode=0
port_25_32_lpmode=0
port_1_8_modsel=0
port_9_16_modsel=0
port_17_24_modsel=0
port_25_32_modsel=0

result=0
pre_port_1_8_reset=256
pre_port_9_16_reset=256
pre_port_17_24_reset=256
pre_port_25_32_reset=256
pre_port_1_8_lpmode=256
pre_port_9_16_lpmode=256
pre_port_17_24_lpmode=256
pre_port_25_32_lpmode=256
pre_port_1_8_modsel=256
pre_port_9_16_modsel=256
pre_port_17_24_modsel=256
pre_port_25_32_modsel=256

port_pre_present=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)

byte_hex_test()
{
	if ! [[ $1  =~ ^[0-9A-Fa-f]{2}$ ]] ; then
		return 0
	else
		return 1
	fi
}

bmc_read_low_speed_signal_status()
{
	val=$(ipmitool raw 0x30 0x8d 2>/dev/null);
	if [ $? -ne 0 ];then
		return 0
	fi

	port_1_8_presence=$(echo $val | awk '{printf $1}')
	byte_hex_test $port_1_8_presence
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_1_8_presence=$( printf "%d" 0x$port_1_8_presence )

	port_9_16_presence=$(echo $val | awk '{printf $2}')
	byte_hex_test $port_9_16_presence
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_9_16_presence=$( printf "%d" 0x$port_9_16_presence )

	port_17_24_presence=$(echo $val | awk '{printf $9}')
	byte_hex_test $port_17_24_presence
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_17_24_presence=$( printf "%d" 0x$port_17_24_presence )

	port_25_32_presence=$(echo $val | awk '{printf $10}')
	byte_hex_test $port_25_32_presence
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_25_32_presence=$( printf "%d" 0x$port_25_32_presence )

	port_1_8_reset=$(echo $val | awk '{printf $3}')
	byte_hex_test $port_1_8_reset
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_1_8_reset=$( printf "%d" 0x$port_1_8_reset )

	port_9_16_reset=$(echo $val | awk '{printf $4}')
	byte_hex_test $port_9_16_reset
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_9_16_reset=$( printf "%d" 0x$port_9_16_reset )

	port_17_24_reset=$(echo $val | awk '{printf $11}')
	byte_hex_test $port_17_24_reset
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_17_24_reset=$( printf "%d" 0x$port_17_24_reset )

	port_25_32_reset=$(echo $val | awk '{printf $12}')
	byte_hex_test $port_25_32_reset
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_25_32_reset=$( printf "%d" 0x$port_25_32_reset )

	port_1_8_lpmode=$(echo $val | awk '{printf $5}')
	byte_hex_test $port_1_8_lpmode
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_1_8_lpmode=$( printf "%d" 0x$port_1_8_lpmode )

	port_9_16_lpmode=$(echo $val | awk '{printf $6}')
	byte_hex_test $port_9_16_lpmode
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_9_16_lpmode=$( printf "%d" 0x$port_9_16_lpmode )

	port_17_24_lpmode=$(echo $val | awk '{printf $13}')
	byte_hex_test $port_17_24_lpmode
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_17_24_lpmode=$( printf "%d" 0x$port_17_24_lpmode )

	port_25_32_lpmode=$(echo $val | awk '{printf $14}')
	byte_hex_test $port_25_32_lpmode
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_25_32_lpmode=$( printf "%d" 0x$port_25_32_lpmode )

	port_1_8_modsel=$(echo $val | awk '{printf $7}')
	byte_hex_test $port_1_8_modsel
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_1_8_modsel=$( printf "%d" 0x$port_1_8_modsel )

	port_9_16_modsel=$(echo $val | awk '{printf $8}')
	byte_hex_test $port_9_16_modsel
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_9_16_modsel=$( printf "%d" 0x$port_9_16_modsel )

	port_17_24_modsel=$(echo $val | awk '{printf $15}')
	byte_hex_test $port_17_24_modsel
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_17_24_modsel=$( printf "%d" 0x$port_17_24_modsel )

	port_25_32_modsel=$(echo $val | awk '{printf $16}')
	byte_hex_test $port_25_32_modsel
	if [ $? -eq 0 ]; then
		return 0
	fi
	port_25_32_modsel=$( printf "%d" 0x$port_25_32_modsel )

	return 1
}

bmc_qsfp_lpmode_write()
{

	if [ $board_ver == 1 ]; then
		cpld_path="/sys/bus/i2c/devices/0-0006/"
		val=0
		for i in $(seq 1 8);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val=$((val | (lpmode_input << ($i - 1))))
		done
		if [ $val -ne $pre_port_1_8_lpmode ]; then
			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x50 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_1_8_lpmode=$val
		fi
		val=0
		for i in $(seq 9 16);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val=$((val | (lpmode_input << ($i - 9))))
		done

		if [ $val -ne $pre_port_9_16_lpmode ]; then
			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x51 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_9_16_lpmode=$val
		fi

		cpld_path="/sys/bus/i2c/devices/0-0007/"
		val=0
		for i in $(seq 17 24);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val=$((val | (lpmode_input << ($i - 17))))
		done

		if [ $val -ne $pre_port_17_24_lpmode ]; then
			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x50 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_17_24_lpmode=$val
		fi
		val=0
		for i in $(seq 25 32);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val=$((val | (lpmode_input << ($i - 25))))
		done

		if [ $val -ne $pre_port_25_32_lpmode ]; then
			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x51 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_25_32_lpmode=$val
		fi

	else
		cpld_path="/sys/bus/i2c/devices/0-0006/"
		val=0
		for i in $(seq 1 8);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val=$((val | (lpmode_input << ($i - 1))))
		done
		val2=0
		for i in $(seq 9 16);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val2=$((val2 | (lpmode_input << ($i - 9))))
		done

		if [ $val -ne $port_1_8_lpmode ] || [ $val2 -ne $port_9_16_lpmode ]; then
			ipmitool raw 0x30 0x8c 0x0 0x1 $val $val2 1>>/dev/null 2>>/dev/null
		fi

		cpld_path="/sys/bus/i2c/devices/0-0007/"
		val=0
		for i in $(seq 17 24);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val=$((val | (lpmode_input << ($i - 17))))
		done

		val2=0
		for i in $(seq 25 32);
		do
			lpmode_path=$cpld_path"port"$i"_lpmode"
			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
			val2=$((val2 | (lpmode_input << ($i - 25))))
		done

		if [ $val -ne $port_17_24_lpmode ] || [ $val2 -ne $port_25_32_lpmode ]; then
			ipmitool raw 0x30 0x8c 0x1 0x1 $val $val2 1>>/dev/null 2>>/dev/null
		fi

	fi

	return 0
}

bmc_qsfp_modsel_write()
{

	if [ $board_ver == 1 ]; then
		cpld_path="/sys/bus/i2c/devices/0-0006/"
		val=0
		for i in $(seq 1 8);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val=$((val | (modsel_input << ($i - 1))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_1_8_modsel ]; then
			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x60 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_1_8_modsel=$val
		fi
		val=0
		for i in $(seq 9 16);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val=$((val | (modsel_input << ($i - 9))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_9_16_modsel ]; then
			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x61 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_9_16_modsel=$val
		fi

		cpld_path="/sys/bus/i2c/devices/0-0007/"
		val=0
		for i in $(seq 17 24);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val=$((val | (modsel_input << ($i - 17))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_17_24_modsel ]; then
			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x60 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_17_24_modsel=$val
		fi
		val=0
		for i in $(seq 25 32);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val=$((val | (modsel_input << ($i - 25))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_25_32_modsel ]; then
			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x61 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_25_32_modsel=$val
		fi
	else
		cpld_path="/sys/bus/i2c/devices/0-0006/"
		val=0
		for i in $(seq 1 8);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val=$((val | (modsel_input << ($i - 1))))
		done

		val=$((0xff - val))

		val2=0
		for i in $(seq 9 16);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val2=$((val2 | (modsel_input << ($i - 9))))
		done

		val2=$((0xff - val2))
		if [ $val -ne $port_1_8_modsel ] || [ $val2 -ne $port_9_16_modsel ]; then
			ipmitool raw 0x30 0x8c 0x0 0x2 $val $val2 1>>/dev/null 2>>/dev/null
		fi

		cpld_path="/sys/bus/i2c/devices/0-0007/"
		val=0
		for i in $(seq 17 24);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val=$((val | (modsel_input << ($i - 17))))
		done

		val=$((0xff - val))

		val2=0
		for i in $(seq 25 32);
		do
			modsel_path=$cpld_path"port"$i"_modsel"
			modsel_input=$(cat $modsel_path | awk '{printf $1}')
			val2=$((val2 | (modsel_input << ($i - 25))))
		done

		val2=$((0xff - val2))
		if [ $val -ne $port_17_24_modsel ] || [ $val2 -ne $port_25_32_modsel ]; then
			ipmitool raw 0x30 0x8c 0x1 0x2 $val $val2 1>>/dev/null 2>>/dev/null
		fi
	fi

	return 0
}

bmc_qsfp_presence_read()
{
	if [ $board_ver == 1 ]; then
		a=0
		tmp1=$(ipmitool raw 0x30 0x25 0x00 0x0c 0x1 0x30 2>>/dev/null)
		a=$((a+$?))
		tmp1=$(echo $tmp1 | awk '{printf $1}')
		sleep 0.05
		tmp2=$(ipmitool raw 0x30 0x25 0x00 0x0c 0x1 0x31 2>>/dev/null)
		a=$((a+$?))
		tmp2=$(echo $tmp2 | awk '{printf $1}')
		sleep 0.05
		tmp3=$(ipmitool raw 0x30 0x25 0x00 0x0e 0x1 0x30 2>>/dev/null)
		a=$((a+$?))
		tmp3=$(echo $tmp3 | awk '{printf $1}')
		sleep 0.05
		tmp4=$(ipmitool raw 0x30 0x25 0x00 0x0e 0x1 0x31 2>>/dev/null)
		a=$((a+$?))
		tmp4=$(echo $tmp4 | awk '{printf $1}')
		sleep 0.05
		if [ $a -eq 0 ];then
			byte_hex_test $tmp1
			if [ $? -eq 0 ]; then
				return 0
			fi
			port_1_8_presence=$( printf "%d" 0x$tmp1 )
			byte_hex_test $tmp2
			if [ $? -eq 0 ]; then
				return 0
			fi
			port_9_16_presence=$( printf "%d" 0x$tmp2 )
			byte_hex_test $tmp3
			if [ $? -eq 0 ]; then
				return 0
			fi
			port_17_24_presence=$( printf "%d" 0x$tmp3 )
			byte_hex_test $tmp4
			if [ $? -eq 0 ]; then
				return 0
			fi
			port_25_32_presence=$( printf "%d" 0x$tmp4 )
			return 1
		fi

		return 0
	else
		bmc_read_low_speed_signal_status
		if [ $? -eq 0 ]; then
			return 0
		fi
	fi
}

bmc_qsfp_reset_write()
{

	if [ $board_ver == 1 ]; then
		cpld_path="/sys/bus/i2c/devices/0-0006/"
		val=0
		for i in $(seq 1 8);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val=$((val | (reset_input << ($i - 1))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_1_8_reset ]; then
			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x20 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_1_8_reset=$val
		fi
		val=0
		for i in $(seq 9 16);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val=$((val | (reset_input << ($i - 9))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_9_16_reset ]; then
			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x21 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_9_16_reset=$val
		fi

		cpld_path="/sys/bus/i2c/devices/0-0007/"
		val=0
		for i in $(seq 17 24);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val=$((val | (reset_input << ($i - 17))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_17_24_reset ]; then
			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x20 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_17_24_reset=$val
		fi
		val=0
		for i in $(seq 25 32);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val=$((val | (reset_input << ($i - 25))))
		done

		val=$((0xff - val))
		if [ $val -ne $pre_port_25_32_reset ]; then
			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x21 $val 1>>/dev/null 2>>/dev/null
			sleep 0.05
			pre_port_25_32_reset=$val
		fi
	else
		cpld_path="/sys/bus/i2c/devices/0-0006/"
		val=0
		for i in $(seq 1 8);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val=$((val | (reset_input << ($i - 1))))
		done

		val=$((0xff - val))
		val2=0
		for i in $(seq 9 16);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val2=$((val2 | (reset_input << ($i - 9))))
		done

		val2=$((0xff - val2))
		if [ $val -ne $port_1_8_reset ] || [ $val2 -ne $port_9_16_reset ]; then
			ipmitool raw 0x30 0x8c 0x0 0x0 $val $val2 1>>/dev/null 2>>/dev/null
		fi

		cpld_path="/sys/bus/i2c/devices/0-0007/"
		val=0
		for i in $(seq 17 24);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val=$((val | (reset_input << ($i - 17))))
		done

		val=$((0xff - val))
		val2=0
		for i in $(seq 25 32);
		do
			reset_path=$cpld_path"port"$i"_reset"
			reset_input=$(cat $reset_path | awk '{printf $1}')
			val2=$((val2 | (reset_input << ($i - 25))))
		done

		val2=$((0xff - val2))
		if [ $val -ne $port_17_24_reset ] || [ $val2 -ne $port_25_32_reset ]; then
			ipmitool raw 0x30 0x8c 0x1 0x0 $val $val2 1>>/dev/null 2>>/dev/null
		fi
	fi

	return 0
}

QSFP_monitor()
{
	while true
	do
		if [ -e /sys/bus/i2c/devices/0-0006/port1_present ] && [ -e /sys/bus/i2c/devices/0-0007/port32_present ] && [ -e /sys/bus/i2c/devices/0-002f/eeprom1 ];then
			bmc_qsfp_presence_read
			mod_presence=$((port_25_32_presence<<8))
			mod_presence=`expr $mod_presence + $port_17_24_presence`
			mod_presence=$((mod_presence<<8))
			mod_presence=`expr $mod_presence + $port_9_16_presence`
			mod_presence=$((mod_presence<<8))
			mod_presence=`expr $mod_presence + $port_1_8_presence`

			bmc_qsfp_lpmode_write
			bmc_qsfp_modsel_write
			bmc_qsfp_reset_write

			for i in $(seq 1 32);
			do
				idx=`expr $i - 1`
				check_bit=$((1<<$idx))
				is_presence=$(($mod_presence & $check_bit))
				if [ $i -le 16 ];then
					cpld_path="/sys/bus/i2c/devices/0-0006/"
				else
					cpld_path="/sys/bus/i2c/devices/0-0007/"
				fi

				if [ $is_presence -eq 0 ];then
					echo 1 > $cpld_path"port"$i"_present"
					if [ $board_ver == 0 ]; then
						if [ -e /tmp/eeprom_init_done ] && [ ${port_pre_present[$((i - 1))]} -eq 0 ]; then
							touch /tmp/plugin_module_event
						fi

						port_pre_present[$((i - 1))]=1
					fi
				else
					echo 0 > $cpld_path"port"$i"_present"
					echo 0 > $cpld_path"port"$i"_data_rdy"
					if [ $board_ver == 0 ]; then
						port_pre_present[$((i - 1))]=0
					fi
				fi
			done
		fi

		sleep 0.2
	done
}

QSFP_monitor