#!/bin/bash

### BEGIN INIT INFO
# Provides:          setup-board
# Required-Start:
# Required-Stop:
# Should-Start:
# Should-Stop:
# Default-Start:     S
# Default-Stop:      0 6
# Short-Description: Setup agc032 board.
### END INIT INFO

case "$1" in
start)
    echo -n "Setting up board... "
    depmod -a
    rmmod i2c-i801
    rmmod i2c-ismt
    modprobe i2c-dev
    modprobe i2c-i801
    modprobe i2c-ismt
    modprobe i2c-mux-pca954x
    modprobe dni_agc032_psu
    modprobe dni_emc2305
    modprobe dni_emc2302
    modprobe at24
    modprobe optoe
    modprobe delta_agc032_cpupld
# Switch CPUPLD to ONIE EEPROM Mux
    echo 0 |sudo tee /sys/devices/platform/delta-agc032-cpupld.0/cpu_i2c_mux_sel
    modprobe eeprom

# Switch CPUPLD to Front Port Mux
    echo 3 |sudo tee /sys/devices/platform/delta-agc032-cpupld.0/cpu_i2c_mux_sel
    modprobe delta_agc032_qsfp

# Switch CPUPLD to MainBoard Mux
    echo 1 |sudo tee /sys/devices/platform/delta-agc032-cpupld.0/cpu_i2c_mux_sel
    modprobe delta_agc032_platform
    modprobe delta_agc032_swpld

    /usr/local/bin/agc032_platform_init.sh
    echo "done."
    ;;

stop)
    echo "done."

    ;;

force-reload|restart)
    echo "Not supported"
    ;;

*)
    echo "Usage: /etc/init.d/platform-modules-agc032.init {start|stop}"
    exit 1
    ;;
esac

exit 0