# libsensors configuration file for DCS-7050QX-32 # ------------------------------------------------ # bus "i2c-2" "SCD SMBus master 0 bus 0" bus "i2c-3" "SCD SMBus master 0 bus 1" bus "i2c-5" "SCD SMBus master 0 bus 3" bus "i2c-6" "SCD SMBus master 0 bus 4" bus "i2c-7" "SCD SMBus master 0 bus 5" chip "k10temp-pci-00c3" label temp1 "Cpu temp sensor" chip "lm73-i2c-3-48" label temp1 "Back panel temp sensor" set temp1_max 65 #set temp1_max_alarm 75 # read-only chip "max6658-i2c-2-4c" label temp1 "Board temp sensor" set temp1_max 65 set temp1_crit 75 label temp2 "Front panel temp sensor" set temp2_max 65 set temp2_crit 75 # disabled because of some eeprom corruption risks #chip "pmbus-i2c-3-4e" # label temp1 "Power controller sensor 1" # set temp1_max 60 # set temp1_crit 70 # label temp2 "Power controller sensor 2" # set temp2_max 60 # set temp2_crit 70 # ignore curr1 chip "dps460-i2c-5-58" label temp1 "Power supply 1 inlet temp sensor" # maximum and critical thresholds are not supported for this psu set temp1_max 60 set temp1_crit 70 label temp2 "Power supply 1 internal sensor" set temp2_max 60 set temp2_crit 70 ignore temp3 set in1_max 250 set in1_crit 255 set power1_max 525 set power2_max 460 set power2_crit 462 set curr1_max 5.28 set curr1_crit 5.30 set curr2_max 36 set curr2_crit 37 chip "dps460-i2c-6-58" label temp1 "Power supply 2 inlet temp sensor" # maximum and critical thresholds are not supported for this psu set temp1_max 60 set temp1_crit 70 label temp2 "Power supply 2 internal sensor" set temp2_max 60 set temp2_crit 70 ignore temp3 set in1_max 250 set in1_crit 255 set power1_max 525 set power2_max 460 set power2_crit 462 set curr1_max 5.28 set curr1_crit 5.30 set curr2_max 36 set curr2_crit 37