Why I did it
Update SAI to SAIBuild2305.26.0.9 for Mellanox platforms.
Fixed issues:
When working with SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD key/value enabled, trying to add a LAG member to a LAG which is created after warm boot initial configuration phase ended, will fail.
Creating BFD session for non default VRF fails (SAI_BFD_SESSION_ATTR_VIRTUAL_ROUTER != SAI_SWITCH_ATTR_DEFAULT_VIRTUAL_ROUTER_ID).
Work item tracking
Microsoft ADO (number only):
How I did it
Updated SAI version in "mlnx-sai.mk" Makefile.
How to verify it
Run "sonic-mgmt" regression testing.
#### Why I did it
src/sonic-linux-kernel
```
* 35f39af - (HEAD -> 202305, origin/202305) [202305] [kconfig] Set default SATA Link Power Management policy (#365) (9 hours ago) [Volodymyr Samotiy]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* a07a03b - (HEAD -> 202305, origin/202305) Fix issue: QSFP module with id 0x0d can be parsed using 8636 (#412) (79 minutes ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Release Notes for Cisco 8111-32EH-O and 8102-64H
Fix for "Failed to get port by bridge port ID" error (MIGSMSFT-354)
Added CLI to enable trap events (MIGSMSFT-166)
Support to add critical message upon replace device SAI notification
Added support for input voltage/current/power info for PSUs
Added support for sff_mgr for deterministic bringup of SFF compliant modules
IOFPGA fix to support optics port in low power mode on 8101-32FH-O
Enable CMIS Manager for 8111-32EH-O
Added dump option to “show plat npu mac-state” CLI to dump MAC state info
Added media-based NPU serdes attributes for Credo 800G AEC Y-cables from media_settings.json
Auto FPD support for power CPLD on 8101 and 8111 platforms
Caveats:
Validation on 8101-32FH-O still pending. Will update release notes once completed.
Below 8800 platform specific fixes included but 8800 support not claimed in this code drop
Interop fix for BFD and Fair VOQ
Fix to update voq cgm profile during port speed change event
Create ECN profiles based on port speeds dynamically
Work item tracking
Microsoft ADO (number only):
How I did it
How to verify it
### Why I did it
The json.hpp header file from that package is used in the sonic-swss-common build. An old version of that header file (from 2016) has been checked into the sonic-swss-common repo. However, since then, there have been changes to that header file, and starting with GCC 12 in Bookworm, generates some errors about variables being possibly uninitialized before use.
##### Work item tracking
- Microsoft ADO **(number only)**: 25027439
#### How I did it
To fix this, install the nlohmann-json3-dev package, and allow using the header file from the Debian package instead of a static checked-in version. The version in Debian Bullseye is much newer than this version.
#### How to verify it
With this change alone, sonic-swss-common will still be using the json.hpp file in its own codebase. The change to actually use the system header file instead of the local header file will happen in a separate PR in the necessary repoes.
Co-authored-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Need to share docker image for telemetry and gnmi, and only use telemetry container for 202305 branch
Work item tracking
Microsoft ADO (number only):
How I did it
Add a new docker image, base-gnmi, build sonic-gnmi and sonic-telemetry on this docker image.
Enable telemetry container.
How to verify it
Run end to end test for telemetry and gnmi.
Change DHCP rate limit in SONiC copp configuration to 100 PPS as this is
necessary to ensure that DHCP flood does not cause LACP/BGP flaps in all
scenarios
This is an extension to the change in image_config: copp: Enable rate limiting
for bgp, lacp, dhcp, lldp, macsec and udld #14859 and sonic-mgmt change in
[tests/copp]: Update copp mgmt tests to support new rate-limits sonic-mgmt#8199
Why I did it
300 PPS is not sufficient to prevent LACP/BGP flaps in all cases. 100 PPS seems to
provide better resiliency against DHCP traffic flood to CPU.
Microsoft ADO 25776614:
Send DHCP broadcast packets to DUT and verify that they are trapped to CPU at 100 PPS.
Signed-off-by: Prabhat Aravind <paravind@microsoft.com>
* [chassis/multi-asic] Make sure iBGP session established as directly connected (#16777)
What I did:
Make Sure for internal iBGP we are one-hop away (directly connected) by using Generic TTL security mechanism.
Why I did:
Without this change it's possible on packet chassis i-BGP can be established even if there no direct connection. Below is the example
- Let's say we have 3 LC's LC1/LC2/LC3 each having i-BGP session session with each other over Loopback4096
- Each LC's have static route towards other LC's Loopback4096 to establish i-BGP session
- LC1 learn default route 0.0.0.0/0 from it's e-BGP peers and send it over to LC2 and LC3 over i-BGP
- Now for some reason on LC2 static route towards LC3 is removed/not-present/some-issue we expect i-BGP session should go down between LC2 and LC3
- However i-BGP between LC2 and LC3 does not go down because of feature ip nht-resolve-via-default where LC2 will use default route to reach Loopback4096 of LC3. As it's using default route BGP packets from LC2 towards LC3 will first route to LC1 and then go to LC3 from there.
Above scenario can result in packet mis-forwarding on data plane
How I fixed it:-
To make sure BGP packets between i-BGP peers are not going with extra routing hop enable using GTSM feature
neighbor PEER ttl-security hops NUMBER
This command enforces Generalized TTL Security Mechanism (GTSM), as specified in RFC 5082. With this command, only neighbors that are the specified number of hops away will be allowed to become neighbors. This command is mutually exclusive with ebgp-multihop.
We set hop count as 1 which makes FRR to reject BGP connection if we receive BGP packets if it's TTL < 255. Also setting this attribute make sure i-BGP frames are originated with IP TTL of 255.
How I verify:
Manual Verification of above scenario. See blow BGP packets receive with IP TTL 254 (additional routing hop) we are seeing FIN TCP flags as BGP is rejecting the connection
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Update peer-group.conf.j2
* Update result_all.conf
* Update result_base.conf
---------
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
src/sonic-utilities
```
* 2b6b6580 - (HEAD -> 202305, origin/202305) Added support to display only nonzero queue counter. (#2978) (#3046) (15 hours ago) [abdosi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-host-services
```
* 689395a - (HEAD -> 202305, origin/202305) Updated the iptable rule to use parent/base name of midplane interface of chassis. (#75) (2 days ago) [abdosi]
* 45212a8 - [DualToR][caclmgrd] Fix IPtables rules for multiple vlan interfaces for DualToR config (#82) (2 days ago) [vdahiya12]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-linux-kernel
```
* 6ff3cc2 - (HEAD -> 202305, origin/202305) arm64: Kconfig inclusions to fix PCI hang and MTD detection (#362) (2 days ago) [Pavan Naregundi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
What I did:
Enable Sending BGP Community over internal neighbors over iBGP Session
Microsoft ADO: 25268695
Why I did:
Without this change BGP community send by e-BGP Peers are not carry-forward to other e-BGP peers.
str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64
BGP routing table entry for 20c0:a801::/64, version 52141
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65500
2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
Last update: Tue Sep 26 16:08:26 2023
str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25
BGP routing table entry for 192.168.35.128/25, version 52688
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65502
3.3.3.6 from 3.3.3.6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
Last update: Tue Sep 26 15:45:51 2023
After the change
str2-xxxx-lc2-2(config)# router bgp 65100
str2-xxxx-lc2-2(config-router)# address-family ipv4
str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V4 send-community
str2-xxxx-lc2-2(config-router-af)# exit
str2-xxxx-lc2-2(config-router)# address-family ipv6
str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V6 send-community
str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64
BGP routing table entry for 20c0:a801::/64, version 52400
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65500
2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
**Community: 1111:1111**
Last update: Tue Sep 26 16:10:19 2023
str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25
BGP routing table entry for 192.168.35.128/25, version 52947
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65502
3.3.3.6 from 3.3.3.6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
**Community: 1111:1111**
Last update: Tue Sep 26 16:10:09 2023
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
src/sonic-linux-kernel
```
* f086121 - (HEAD -> 202305, origin/202305) Intgerate HW-MGMT 7.0030.2008 Changes (#361) (12 hours ago) [Vivek]
* 7551dd9 - arm64: Enable CONFIG_KEXEC_FILE (#360) (13 hours ago) [Pavan Naregundi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Update SAI version to SAIBuild2305.26.0.0
New features
FDB entries are now restored after warmboot to prevent temporary system flooding.
Update SDK/FW to 4.6.2102/2012.2102
Fixed Issues:
Some of the Warmboot related files which were created by SDK during switch create are now generated during pre shutdown flow
Work item tracking
Microsoft ADO (number only):
How I did it
Updating the versions in make file.
How to verify it
Running sonic-mgmt regression.
cherry pick #16894
Why I did it
Privileges and volumes were incorrectly set in macsec container. Privileged flag is set to false and volumes are not mounted properly.
admin@vlab-01:~$ docker inspect macsec0 | grep Privi
"Privileged": false,
admin@vlab-01:~$ docker inspect macsec0 | grep -A 10 Binds
"Binds": [
"/var/run/redis0:/var/run/redis:rw",
"/var/run/redis-chassis:/var/run/redis-chassis:ro",
"/usr/share/sonic/device/x86_64-nokia_ixr7250e_36x400g-r0/Nokia-IXR7250E-36x100G/0:/usr/share/sonic/hwsku:ro",
"/var/run/redis0/:/var/run/redis0/:rw",
"/usr/share/sonic/device/x86_64-nokia_ixr7250e_36x400g-r0:/usr/share/sonic/platform:ro"
],
Work item tracking
Microsoft ADO (number only):
How I did it
How to verify it
Make sure privileged settings remain unchanged and make sure volumes are properly mounted
admin@vlab-01:~$ docker inspect macsec | grep Privi
"Privileged": false,
admin@vlab-01:~$ docker inspect macsec | grep -A 10 Binds
"Binds": [
"/etc/timezone:/etc/timezone:ro",
"/var/run/redis:/var/run/redis:rw",
"/var/run/redis-chassis:/var/run/redis-chassis:ro",
"/etc/fips/fips_enable:/etc/fips/fips_enable:ro",
"/usr/share/sonic/templates/rsyslog-container.conf.j2:/usr/share/sonic/templates/rsyslog-container.conf.j2:ro",
"/etc/sonic:/etc/sonic:ro",
"/host/warmboot:/var/warmboot",
"/usr/share/sonic/device/x86_64-kvm_x86_64-r0/Force10-S6000/:/usr/share/sonic/hwsku:ro",
"/usr/share/sonic/device/x86_64-kvm_x86_64-r0:/usr/share/sonic/platform:ro"
],
* Support lazy install of sdk drivers
This patch adds support for lazy install of Marvell prestera SDK
drivers for platform-nokia. Lazy install for drivers is added as
updated sdk driver needs to classify the drivers required for platform
during compile time. SDK drivers and platform files are now fetched
from a submodule(mrvl-prestera).
Additionaly, DTB required for sonic_fit creation during compile time
is sourced from sonic-linux-kernel.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
* Add hugepage cmdline agrument
Updated sdk & driver requries hugepage to be reserved during kernel
boot. These kernel command line agrument are passed from installer.conf
in device folder.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
* Update SAI deb to 1.12.0-3
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
---------
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
Why I did it
A race condition exists while the TPH is processing a netlink message - if a second netlink message arrives during processing it will be missed since TPH is not listening for other messages.
Another bug was found where TPH was unnecessarily restarting since it was checking admin status instead of operational status of portchannels.
How I did it
Subscribe to APPL_DB for updates on LAG operational state
Track currently sniffed interfaces
How to verify it
Send tunnel packets with destination IP of an unresolved neighbor, verify that ping commands are run
Shut down a portchannel interface, verify that sniffer does not restart
Send tunnel packets, verify ping commands are still run
Bring up portchannel interface, verify that sniffer restarts
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Orchagent uses PORTCHANNEL term when parsing this field. Change the YANG model to align to orchagent.
- Why I did it
When specifying PORTCHANNEL in ACL_TABLE_TYPE table YAGN model validation does not pass, when using term LAG orchagent does not accept such table type.
Fix it by aligning YANG model to orchagent.
- How I did it
Fix in YANG model.
- How to verify it
Create custom ACL table type.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
#### Why I did it
src/sonic-utilities
```
* 3609e417 - (HEAD -> 202305, origin/202305) [sonic-package-manager] do not modify config_db.json (#3032) (2 hours ago) [Stepan Blyshchak]
* 354dfe80 - [sonic_installer]: Improve exception handling: introduce notes. (#3028) (3 hours ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Share docker image to support gnmi container and telemetry container
backport #16863
Work item tracking
Microsoft ADO 25423918:
How I did it
Create telemetry image from gnmi docker image.
Enable gnmi container and disable telemetry container by default.
How to verify it
Run end to end test.
#### Why I did it
src/sonic-swss
```
* 65720c1a - (HEAD -> 202305, origin/202305) Send hearbeat during warm reboot freese (#2923) (#2956) (14 hours ago) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 9b9ac4fd - (HEAD -> 202305, origin/202305) Add more debug information when PFC WD is triggered (#2858) (8 minutes ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
