* [docker-fpm-frr]: Generate separated staticd.conf for staticd
Generate staticd.conf by templates/staticd.conf.j2 with config DB data
* [docker-fpm-frr]: Remove default_route block from zebra.conf.j2
default_route block already moved to staticd.conf.j2
* [docker-fpm-frr]: Add test for staticd.conf.j2 template
* Add test for staticd.conf.j2 template
* Correct the sample output of zebra.conf.j2 template
* Fix a typo in test_zebra_frr
* [docker-fpm-frr]: Fix test_j2files test errors
* Fix test errors in test_j2files.py and test_j2files_t2_chassis_fe.py
* Fix typo in test_j2files_t2_chassis_fe.py
radv should be left alone during warm restart of swss. Otherwise it will
announce departure and cause hosts to lose default gateway.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
- Improve smbus reliability for all platforms
- Delay processing of the reboot cause to reduce critical path
- Add support of get_change_event for PSUs
Added exceptions handling for BFN psuutil.py and eeprom.py which are raised when syseepromd and psud try to connect to the BFN thrift server which is not up yet. Now the exceptions backtrace is not logged to the syslog. Also psud doesn't exit on system bootup due to uncaught exception.
Signed-off-by: Vitaliy Senchyshyn <vsenchyshyn@barefootnetworks.com>
* Change psu driver to comfort to lm-sensors.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Duplicate fan attributes with naming conforming to lm-sensors.
Replace psu drivers.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Revise cpr_4011_4mxx.c to support lm-sensors.
Signed-off-by: roy_lee <roy_lee@accton.com>
* slave.mk
* .gitignore
The SONIC_PYTHON_STDEB_DEBS group is part of SONIC_CLEAN_DEBS
for cleaning with 'make clean', but this group is overlooked
since they reside in PYTHON_DEBS_PATH, not DEBS_PATH. This
fix creates a separate clean rule for SONIC_PYTHON_STDEB_DEBS.
Also noticed the .arch file showing up on 'git status' so
added it to .gitignore.
Signed-off-by: Greg Paussa <greg.paussa@broadcom.com>
ndisc6 gathers a few diagnostic tools for IPv6 networks including:
- ndisc6, which performs ICMPv6 Neighbor Discovery in userland,
- rdisc6, which performs ICMPv6 Router Discovery in userland,
- rltraceroute6, a UDP/ICMP IPv6 implementation of traceroute,
- tcptraceroute6, a TCP/IPv6-based traceroute implementation,
- tcpspray6, a TCP/IP Discard/Echo bandwidth meter,
- addrinfo, easy script interface for hostname and address resolution,
- dnssort, DNS sorting script.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
[sairedis]:
ARM32 bit fixes, for 64bit printf format specifier (#490)
fix wrong API type , add cmdline parse option , remove unuseful api call (#499)
Use pointer to member function to reduce the footprint of collectCounters() (#488)
[syncd] Add support for Innovium platform (#496)
[saisdkdump]: Fix dump generation crash (#493)
[swss]:
Add scope attribute to VNET table. (#954)
[portsyncd]: Fix portsyncd restart case (#1019)
[vnet]: Enable "vnet_orch_1" VS test case (#1020)
[vlan] Add pytest cases to validate the behavior about add LAG member to vlan. (#875)
[policerorch]: Add the capability to update policer rate/size (#1017)
[aclorch]: Add MIRRORv6 support for NPS platform (#1018)
[orchagent]: Avoid crash by setting g_syncMode flag before create_switch (#1014)
[orchagent] Add support for Innovium platform (#1005)
Provide broadcast IP while configuring interface ip address (#1007)
[VLAN] Add pytest cases to validate different use-case of tagging_mode. (#860)
[vstest]: Add test_port_config.py which include breakout port test. (#866)
[vstests]: change 'test_acl_egress_table.py' to UNIX format (#1010)
[vlan] Add pytest cases to verify data in app db and state db. (#895)
[vstest]: Add the CRM tests (#1013)
[warm-reboot]: add bgp eoiu support to speed up route reconcile (#856)
[fdborch] support mac update (#877)
[vxlanorch] Fix Logic of Vxlan tunnel removal (#995)
Fix VLAN error introduced with new 4.9 kernel behavior (#1001)
Config DB manual is being moved from Wiki to SWSS repo (#1002)
Trap DHCPv6 packets for supporting ZTP over in-band interfaces using … (#997)
Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
* [DELL][Z9100,S6100,S6000] Platform 2.0 SFP Changes
Added support in sfp.py file which will be generic. Send the eeprom path and sfp_control path from chassis.py
Present: Servers are listed in the same order as in redis-db
Fix: Save the sort o/p, hence use sorted list to write into pam.d's conf.
As well convert priority to integer for use by sort.
* Enable debug image build for kvm image.
* Fix a bug in cleaning up requests referring the netsmp_session being closed to avoid a crash, during netsnmp_session close/abort due to timeout.
RCA:
The netsnmp_agent_session requests use netsmp_subtree objects that matches the associated variable name.
The netsnmp_subtrees created through a netsnmp_session are tied to that session.
When a subagent connection is closed/dropped due to timeout, all associated netsnmp_subtree objects are fred.
Hence during a netsnmp_session close, all the delegated netsnmp_agent_sessions are scanned for requets that could be using netsnmp_subtree objects associated with this netsnmp_sesssion or its subsession. For each of the found request, they are explicitly marked to fail and a call is made to complete them.
But due to the bug in scanning, it leaves behind requests and hence later when the requests get processed, they refer the *now* freed netsnmp_subtree. As often these requests gets completed pretty soon, they escape crashing. But if it so happens that the freed memory happened to complete a memory unit, hence returned to kernel or it got reallocated & changed enough to crash, the snmpd crashes.
* Revert the changes
* Revert
* [service dependent] describe non-warm-reboot dependency outside systemctl
When dependency was described with systemctl, it will kick in all the time,
including under warm reboot/restart scenarios. This is not what we always
want. For components that are capable of warm reboot/start, they need to
describe dependency in service files.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [service] teamd service should not require swss service
Adding require swss will cause teamd to be killed by systemctl when swss
stops. This is not what we want in warm reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* refactoring code
* rename functions to match other functions in the file
* [sonic-cfg] [Marvell] get_system_mac() to fetch valid mac address from Eeprom else
get mac address from eth0
* [platform] Marvell mac address fetch for different platform based on board
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* fix sfpd initialize issue
* fix review comments
* rephrase the output log
* fix retry counter
* change the retry time to 10, means set max waiting time 1024s
* fix mlnx-sfpd init flow with new solution
* [mlnx-sfpd] address comments
1. wait for 5 seconds * 30 times, 150 seconds totally. use constant wait time for each retry.
2. use try/except structure so that error can be handled in a graceful way
* [mlnx-sfpd] wait 5 seconds after SDK_DAEMON_READY_FILE exists to make sure SDK is fully up.
* [mlnx-sfpd]simplify initialization by using deinitialize on initializing failure
This switch has 27 fiber ports, 4x25G, 20x10G , and 3x100G ports ports.
CPU: Intel ® Atom™ Processor C3508,1.6GHz
BMC: None
MAC: Broadcom BCM88470 (Qumran AX).
MISC: Support IEEE1588v2, hot-swappable PSU, hot-swappable fan tray.
But notice here, BCM88470 is not supported for SAI now.
So the syncd container is not running so far.
Signed-off-by: roy_lee <roy_lee@accton.com>
Corrected the ingress and egress lossy and lossless buffer pool and profile values.
Single pool for lossy and lossless traffic for PFC priority 3 and 4.
In HWSKU DellEMC-S5232f-P-100GG/25G/10G. Defaults to lossy profile. No Lossless support.
2 default mmu_init.data files (TD3-DEFAULT-LOSSLESS-P3P4 and "TD3-DEFAULT" created in SAI code. This will have cpu pool configuration and MMU init related configurations.
TD3-DEFAULT.data file is only supports lossy.
TD3-DEFAULT-LOSSLESS-P3P4.data file is supports lossless on P3 and P4.
* Utilize the same sai.profile and config.bcm file
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Fix the index issues for HWSKU: Seastone-DX010-25-50 and Seastone-DX010-50-40
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update sonic-swss submodule
* src/sonic-swss 63afbd5...5be3963 (11):
> Remove the platform check for remove/add port action at init phase. (#1006)
> [test]: Add Class object in each test script file (#992)
> [vstest]: add --imgname option to specify vs image to test (#996)
> [qosorch]: Add cir and pir parameters for scheduler (#991)
> [vstest]: report error when team kernel module is not available (#994)
> Support per buffer pool watermark polling mode (#973)
> [test]: Update test_vlan to use dvs functions (#986)
> Add synchronous switch to orch agent (#987)
> ARM32 bit fixes, for 64bit printf format specifier (#989)
> [portsorch]: Rename function isPortReady() to allPortsReady() (#990)
> [routeorch]: Fix observer detaching procedure for next hop observers (#985)
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Add fan control for as7116-54x
Modify sfputil.py to support sfp insert and remove events for as7116-54x
Modify port_config.nps to set port default admin down
Modify port_config.ini for add speed attr
Code format optimization like remove newline
Modify buffers_defaults_t0 and t1, change ingress_lossless_pool mode from dynamic to static
Add nephos_dac.nps and nephos_opt.nps for support difference dac and fiber module
when device disk is small, do not unzip dockerfs.tar.gz on disk.
keep the tar file on the disk, unzip to tmpfs in the initrd phase.
enabled this for 7050-qx32
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [Makefile/slave docker] ARM arch doesn't support few packages
iproute2 is missing for ARM sonic-slave docker
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
