This reverts commit 9750cb4.
There is a PR to handle 202205 branch revert: #12184
- Why I did it
The PR to be reverted introduced many notice logs every 1 minute if SFP is not plugged:
Cannot get module EEPROM information: Input/output error
Before the "bad" PR, the message format is like this:
INFO pmon#supervisord: xcvrd Cannot get module EEPROM information: Input/output error
It was truncated by rsyslog because every message is the same. However, the "bad" PR introduces SFP index to the message:
NOTICE pmon#xcvrd: Failed to get EEPROM data for sfp 39: Cannot get module EEPROM information: Input/output error
Rsyslog no longer truncate such log and many such messages are flooded to syslog.
- How I did it
Revert the PR
- How to verify it
Manual test
- Why I did it
Update SDK/FW version - 4.5.2320/2010_2320 in order to have the following fixes:
• Spectrum-3 | PCI calibration changes from a static to a dynamic mechanism.
• [VxLAN] TTL was set to 0 for non IP traffic (such as ARP)
- How I did it
Update pointer for the SDK/FW
- How to verify it
Run regression tests
- Why I did it
ethtool print error logs when EEPROM of a SFP is not available. It prints error like this:
INFO pmon#/supervisord: xcvrd Cannot get module EEPROM information: Input/output error
INFO pmon#/supervisord: xcvrd Cannot get Module EEPROM data: Invalid argument
However, this log does not contain the relevant SFP index which is hard for developer/qa to find the exactly SFP.
- How I did it
Redirect ethtool stderr to subprocess and log it better
- How to verify it
Manual test
* Adding support for get/set low pwer mode for QSFPs in PDDF common APIs
* Adding support for get/set low pwer mode for QSFPs in PDDF common APIs - Review comments
Why I did it
To gracefully unmount filesystems and stop containers while performing a cold reboot.
Unmount ONIE-BOOT if mounted during fast/soft/warm reboot
How I did it
Override systemd-reboot service to perform a cold reboot.
Unmount ONIE-BOOT if mounted using fast/soft/warm-reboot plugins.
How to verify it
On reboot, verify that the container stop and filesystem unmount services have completed execution before the platform reboot.
Why I did it
The directory /var/warmboot as top directory for warmboot feature is also needed in docker gbsyncd. Some vendor SAI might save data under it. Without it, the SAI init/creation API failure has happened on PikeZ platform.
How I did it
Mount host directory /host/warmboot as /var/warmboot in docker gbsyncd, which is same as what it has done on docker syncd.
Why I did it
S5296F - Platform API 2.0 changes
How I did it
Implemented the functional API's needed for Platform API 2.0
How to verify it
Used the API 2.0 test suite to validate the test cases.
- Why I did it
Update SDK/FW version - 4.5.2318/2010_2318 to pick up new fixes:
1. Cr space timeout on Hold and Release GW - at warm boot
2. Spectrum Port in stuck PHY_UP after peer side rebooted
3. Memory leak in sx_api_router_ecmp_update_set
- How I did it
Update the make file with the new version number
Update submodule Switch-SDK-drivers pointer
- How to verify it
Run sonic regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### How I did it
Replace swsssdk with swsscommon in centec devices.
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Replace swsssdk with swsscommon in centec devices.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
It solves a swss orchagent crash issue on PikeZ device, due to link-training setting of external PHY port.
How I did it
Catch up the fix for CS00012257483 in version 7.1.7.2.
* draft upgrade to deb11 of syncd and syncd-rpc
* upgrade to python3
* revert workaround with libsaithrift
* Provide urls for sai and platform debs
* Downgrade python3 to python2
* Remove saithrift-patches
* Upgrade modules
* remove unnecessary lib
* remove more unnecessary modules
* Update sdk reference
* remove unnecessary packages from syncd-rpc
# Why I did it
platform-modules-belgite's deb requests linux-image-5.10.0-8-2-amd64-unsigned, which does not match the runtime kernel version
# How I did it
update the belgite's deb configuration in deb's control
# How to verify it
check the firsttime boot log in belgite platform
Co-authored-by: nicwu-cel <nicwu@celestica.com>
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Advance saibcm-modules-dnx
- Add Watchdog remaining time API
- Add support for non-swappable fans via a FixedDrawer
- Add ASIC voltage tweaks for PikeZ product
- Add better pylint support
- Fix reboot-cause decision issue for future products
- Fix thermal issue for RJ45 ports
- Deprecate Catalina prototype support
- Why I did it
Update HW-MGMT to V.7.0020.3006
1. Support new system SN2201
2. Add COMEX BRDWL respin support
- How I did it
Update the version number of the makefile
Advance the hw-mgmt submodule pointer
- How to verify it
Run full regression on Nvidia platforms
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Add PSU input voltage and input current to mlnx platform api.
- How I did it
Implement 2 function of getting the psu voltage and psu current input:
Get the values from "power/psu{}_curr_in" , "power/psu{}_volt_in"
- How to verify it
Manual test.
Run sonic-mgmt regression
Signed-off-by: orfar1994 <orfar1994@gmail.com>
- Why I did it
Add more log while doing sysfs reading to increase the debug capability
- How I did it
Log the relevant file path and error number while sysfs reading return None
- How to verify it
Manual test
To reduce rc.local script execution time. Porting changes from [DellEMC] S6100 Platform Service optimization #10989
Changes:
Moving platform-modules-s6100.service and s6100-lpc-monitor.service asynchronous to rc.local script.
this upgrade contains two changes:
1. Add the following MacSec Initialization Condition:
- When MacSec feature is not included MacSec block should not be brought out of reset irrespective of the value of the newly added config variable.
- When included its initialization is controlled by the newly added config variable.
2. DNX buf fix: increase _BRCM_SAI_MAX_ACL_TABLES to 128
Signed-off-by: zitingguo <zitingguo@microsoft.com>
Why I did it
Enable syncd container autorestart for Innovium platforms
How I did it
Add critical_process file and sypervisord.conf entry
How to verify it
Tested with autorestart/test_container_autorestart.py::test_containers_autorestart
PASSED autorestart/test_container_autorestart.py::test_containers_autorestart[sonic-xxx-dut-sonic-xxx-dut|syncd]
Signed-off-by: rck-innovium rck@innovium.com
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
Fix an issue with front panel port led introduced in previous PR
Implement status led for linecards
Implement full power cycle for linecards
Improve reboot cause reporting for Ucd devices
Add fan support for PikeZ
Miscellaneous fixes and improvements
- Why I did it
Support get_port_or_cage_type for RJ45 ports
- How I did it
Implement the new platform API get_port_or_cage_type
Fix the issue: unable to import SFP when chassis object is destructed
- How to verify it
Manually test and regression test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Fix bug: pmon report error on start up because some SKUs do not have hwsku.json
- How I did it
If hwsku.json, do not extract RJ45 port information
- How to verify it
Manual test.
Unit test.
- Why I did it
Add support for mellanox platform building for target architecture arm64.
- How I did it
Contains the following changes:
1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH)
2. Add logic to download correct binary for MFT package
3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader
- How to verify it
Build mellanox platform with TARGET_ARCH set as arm64
Give more room for the kernel image in memory
Change-Id: I015856d173d50d94e30d8c555590efb70eb712ae
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
- Why I did it
Advance to new SAI version for bugs fixes as well as new features/enhacements:
New:
- ARM64 support
- FG ECMP performance optimization
- Support setting empty list for port ingress/egress buffer profile list
- Add service port for SN5600
- Add CR8/SR8/LR8/KR8 interface type
- Disable mlxtrace during debug dump
Fixes:
- Fix SAI_ACL_ENTRY_ATTR_FIELD_TC
- Fix Packets loop back if no member in portchannel
- Fix optimize descriptors apply time (and fast boot time)
- Add flush fdb entries for vxlan tunnel bridge port
- Don't disable used tunnel underlay interfaces
- How I did it
Advanced SAI submodule
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
#### Why I did it
Fix some bugs on centec tsingma bsp and v682 sonic_platform package.
#### How I did it
1. add module license for centec mars phy driver
2. Fix i2c function ability setting for tsingma soc i2c controller
3. Fix eeprom read error on v682 sonic_platform sfp module
#### How to verify it
Build SONiC image and verify it on centec E530-48T4X and V682-48Y8C board.
Why I did it
Fix Centec-Arm64 compile error, Centec SAI Dev package reference is error
How I did it
Modify sai.mk of arm64 platform for Centec
How to verify it
Build centec amd64 and arm64 sonic image
Signed-off-by: Sudharsan Dhamal Gopalarathnam sudharsand@nvidia.com
Why I did it
During the system boot up when 'show platform status' or 'show version' command is executed before STATE_DB CHASSIS_INFO table is populated, the show will try to fallback to use the platform API. The DMI file in mellanox platforms require root permission for access. So if the show commands are executed as admin or any other user, the following error log will appear in the syslog
Jun 28 17:21:25.612123 sonic ERR show: Fail to decode DMI /sys/firmware/dmi/entries/2-0/raw due to PermissionError(13, 'Permission denied')
How I did it
Check the file permission before accessing it.
How to verify it
Added UT to verify. Manually verified if the error log is not thrown.
Why I did it
Support Intel Tofino based platforms Netberg Aurora 610
ASIC: Intel Tofino BFN-T10-032D-020
Pors: 48x 25G + 8x 100G
How I did it
Added specification to device/netberg directory
Added platform/barefoot/sonic-platform-modules-netberg contains kernel modules, scripts and sonic_platform packages.
Modified the platform/barefoot/one-image.mk and platform/barefoot/rule.mk to include Aurora 610 related ID and files.
How to verify it
Build SONiC
Install the image on the device and verify the related components are installed and shown correctly.
Why I did it
Add 6512-32r support for Wistron platform
Update sw-to3200k for newer branch
How I did it
Add code in device and platform folder for 6512-32r
Update sw-to3200k code both in device and platform folder
How to verify it
Install on Wistron device and run command to verify
Signed-off-by: RogerChang Roger_Chang@wistron.com
Why I did it
To return 'False' in update_firmware component API in DellEMC Z9332f platform, if the firmware image is not present in the provided image path.
How I did it
Updated 'update_firmware' in component.py to return False if image is not found in location provided by 'image_path'
How to verify it
Verified that the API returns False when an invalid image path is specified.
- Why I did it
This is for the eventual support of multiple architectures for the mellanox platform.
- How I did it
Change the location of the binaries in Switch-SDK-drivers so that the path specifies the target architecture in addition to the target distribution that the debians are built for.
This is the most straightforward way to separate binaries built against different architectures and selectively target them for installation in the mellanox SONiC image.
- How to verify it
Build SONiC for mellanox and verify it compiles successfully.
- Why I did it
To provide an ability to suppress ASAN false positives and have a clean ASAN report for docker-sonic-vs/mlnx-syncd/orchagent docker
- How I did it
Added the "print_suppressions=0" to ASAN configs.
- How to verify it
add a suppression to some ASAN-enabled component (the suppression should catch some leak)
build with ENABLE_ASAN=y
run a test and see that the ASAN report is empty instead of having the suppression summary
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
To ensure that ASAN logs are always generated. Currently, the way to get the logs is to map the "/var/log/asan" outside of a container, which doesn't work for DVS test run with "--imgname" option.
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
* Support new platform SN2201 and RJ45 port
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* remove unused import and redundant function
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* fix error introduced by rebase
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* Revert the special handling of RJ45 ports (#56)
* Revert the special handling of RJ45 ports
sfp.py
sfp_event.py
chassis.py
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove deadcode
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Support CPLD update for SN2201
A new class is introduced, deriving from ComponentCPLD and overloading _install_firmware
Change _install_firmware from private (starting with __) to protected, making it overloadable
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Initialize component BIOS/CPLD
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove swb_amb which doesn't on DVT board any more
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove the unexisted sensor - switch board ambient - from platform.json
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Do not report error on receiving unknown status on RJ45 ports
Translate it to disconnect for RJ45 ports
Report error for xSFP ports
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Add reinit for RJ45 to avoid exception
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Co-authored-by: Stephen Sun <5379172+stephenxs@users.noreply.github.com>
Co-authored-by: Stephen Sun <stephens@nvidia.com>
Why I did it
S5212F - Platform API 2.0 changes
S5224F - Platform API 2.0 changes
How I did it
Implemented the functional API's needed for Platform API 2.0
Added media_settings.json, pcie.yaml, platform.json, system_health_monitoring_config.json files.
How to verify it
Used the API 2.0 test suite to validate the test cases.
Why I did it
Added support for the device Z9432F
How I did it
Implemented the support for the platform Z9432F
Switch Vendor: DellEMC
Switch SKU: Z9432F-ON
ASIC Vendor: Broadcom
SONiC Image: sonic-broadcom.bin
This fixes the build for armhf to be able to use '/device///installer.conf' files. Specifically, armhf needs support to be able to change the size of /var/log/ directory. It is hardcoded to 512 bytes on all armhf platforms currently. This change will allow any armhf platform to be able to use an installer.conf file to customize the installed image.
- Why I did it
"import sonic_platform" takes about 600ms ~ 1000ms, it is kind of slow. After this optimization, the time is about 100ms. The benefit is that those CLIs which does not need the slow import sentence would be faster than before.
- How I did it
Find slow import and call them when need.
- How to verify it
Measure the import time.
- Why I did it
To include latest fixes:
1. Warmboot | When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU.
2. Link Up | When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted.
3. Shared buffer | While moving from lossless to lossy while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized.
- How I did it
Updated SDK submodule along with the relevant Makefiles
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Currently, the build with ASAN_ENABLE=y reuses the packages built with
ASAN_ENABLE=n (and vice versa). To address this issue, ASAN_ENABLE is added to DEP_FLAGS for asan-enabled packages (docker-syncd-mlnx, syncd, docker-orchagent, swss).
- Why I did it
To make dpkg cache use/rebuild the packages for ASAN_ENABLE=y/n.
- How I did it
Added ASAN_ENABLE to the DEP_FLAGS for asan-enabled packages.
- How to verify it
Built with ASAN_ENABLE=y/n and checked the .flags .log files.
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
This is to improve the readability of ASAN reports. The debug package adds function names and source code references to the backtrace (currently, there are only binary addresses of functions)
Another way to address this issue is to build the image with "INSTALL_DEBUG_TOOLS=y". The downside of this approach is that the image size and compilation time are unnecessarily big. Also, the idea is to make the "ENABLE_ASAN" self-sufficient, which would not be the case for this approach.
- Why I did it
To improve the readability of asan logs.
- How I did it
Added SYNCD_DBG and SWSS_DBG to corresponding docker images for ASAN_ENABLE=y build
- How to verify it
Add artificial memory leak
Build with ASAN_ENABLE=y
Test the image and check the ASAN report
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
Update MFT to newer version
- How I did it
Update MFT_VERSION in platform/mellanox/mft.mk
- How to verify it
Check version via dpkg -l | grep mft
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Why I did it
add celestica belgite platform
How I did it
add belgite platform in celestica
Co-authored-by: nicwu-cel <nicwu@celestica.com>
Co-authored-by: anjian <anjian@celestica.com>
Co-authored-by: sandycelestica <sandyli@celestica.com>
This update has following changes
Refactor pci topology logic for chassis (fixes some chassis commands and chassisd on linecard)
Introduce new cooling algorithm
Fix linecard poweroff logic when supervisor is going down
Fix linecard status led leading to system-health crashing
Misc fixes
- Why I did it
Script fails when there is an exception while reading
- How I did it
Add more logs and checks. Fix wrong variable naming and messages.
- How to verify it
Provoke exception while read_eeprom() and check that it is handled properly
Why I did it
To include ONIE version in show platform firmware status command output in DellEMC S6100 and Z9332f platforms.
How I did it
Include ‘ONIE’ in the list of components provided by platform APIs in DellEMC S6100 and Z9332f.
Unmount ONIE-BOOT if mounted using fast/soft/warm-reboot plugins in DellEMC S6100.
Fixes#9279
- Why I did it
Part of larger effort to move all SONiC systems to bullseye
- How I did it
1. Update container makefiles with correct dependencies
2. Update container Dockerfile with correct base image
3. Update container Dockerfile with correct apt dependencies
4. Update any other makefiles with dependencies to remove python2 support
5. Minor changes to support bullseye / python3
- How to verify it
Run regression on the switch:
1. Verify PTF community tests work
2. Verify syncd runs and all ports come up / pass traffic
3. Verify all platform tests succeed
Update SDK/FW to 4.5.1500/2010.1500 and SAI version to 1.21.1.1
SDK/FW features:
1. Added support for Finisar DR4 (FTCD4523E2PCM) on Spectrum-2 and Spectrum-3 systems.
SAI Features:
1. ECMP overlay support for IPv6
2. BFD offloading / 4K scale
3. Host interface user traps + improved trap registration (table entry)
4. gcc11 compilation fixes
5. Read support for ACL redirect action
6. Optimize ECMP DB size
7. Buffer descriptors new defaults
8. Updated port mapping for SN2201
SAI Fixes:
1. Debug counter removal when configured with all drop reasons
- Why I did it
Upgrade Mellanox SDK and SAI versions to latest
- How I did it
Updated submodule pointers
- How to verify it
Regression tested
Currently, the build dockers are created as a user dockers(docker-base-stretch-<user>, etc) that are
specific to each user. But the sonic dockers (docker-database, docker-swss, etc) are
created with a fixed docker name and common to all the users.
docker-database:latest
docker-swss:latest
When multiple builds are triggered on the same build server that creates parallel building issue because
all the build jobs are trying to create the same docker with latest tag.
This happens only when sonic dockers are built using native host dockerd for sonic docker image creation.
This patch creates all sonic dockers as user sonic dockers and then, while
saving and loading the user sonic dockers, it rename the user sonic
dockers into correct sonic dockers with tag as latest.
docker-database:latest <== SAVE/LOAD ==> docker-database-<user>:tag
The user sonic docker names are derived from 'DOCKER_USERNAME and DOCKER_USERTAG' make env
variable and using Jinja template, it replaces the FROM docker name with correct user sonic docker name for
loading and saving the docker image.
Why I did it
Migrate ptftests script to python3, in order to do an incremental migration, add python virtual environment firstly, install all required python packages in virtual env as well.
Then migrate ptftests scripts from python2 to python3 one by one avoid impacting non-changed scripts.
Signed-off-by: Zhaohui Sun zhaohuisun@microsoft.com
How I did it
Add python3 virtual environment for docker-ptf.
Add submodule ptf-py3 and install patched ptf 0.9.3 into virtual environment as well, two ptf issues were reported here:
p4lang/ptf#173p4lang/ptf#174
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
On vs platform, egress_lossless_pool's mode is static.
So the corresponding profile should be of static_th as well.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Optimize dx010 sonic platform init script to speed up init process
* Merge issue #10152: [warm-upgrade][202012] Slow Celestica platform init
in rc.local causes lacp-teardown fix into master branch
Signed-off-by: Eric Zhu <erzhu@celestica.com>
- Why I did it
To support docker-sonic-vs image with ASAN.
- How I did it
1. Made the supervisord.conf a template
2. Added the 'log_path' environment variable for ASAN-enabled daemons
3. Added supervisord.conf.j2 generation and ASAN lib to the docker-sonic-vs/Dockerfile.j2
- How to verify it
1. Made a build with ENABLE_ASAN=y
2. Run the tests, checked ASAN reports
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
InvalidPsuVolWA.run might raise exception if user power off PSU when it is running. This exception is not caught and will be raised to psud which causes psud failed to update PSU data to DB.
- How I did it
1. Change the log level when WA does not work. This could happen when user power off PSU, hence changing the log level from error to warning is better
2. Change the wait time from 5 to 1 to avoid introduce too much delay in psud. 1 second is usually enough per my test
3. Give a default return value for function get_voltage_low_threshold and get_voltage_high_threshold to avoid exception reach to psud
- How to verify it
Manual test.
Run sonic-mgmt regression
Fix the issues #10501 and #9733
If having gearbox, we need:
* add gbsyncd as a peer since swss also has dependency on gbsyncd
* add service gbsyncd to FEATURE table if it is missing
- Why I did it
Implement newly added reboot causes in PR Azure/sonic-platform-common#277
- How I did it
Map the reboot cause sysfs to the newly added reboot causes.
- How to verify it
manual test, check whether the reboot cause is correct after rebooting the switch in various ways.
run the community reboot test to see whether the reboot cause checker is passing.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
