Fix the following issues:
Spectrum-2, Spectrum-3 | Port | Fix link issue when using 25 GbE rate between two ports while one is on Spectrum-2-based system and the other is on Spectrum-3-based system
All | warmboot | fail to upgrade from earlier SONiC versions with official SDK/FW 4.4.2306 (was on SONiC 201911)
All | What-Just-Happened | When enabling or disabling WJH under high traffic load to the host CPU, in very specific and low probability conditions, an error could occur, that may result in loss of data, channel failure or in extreme cases SW failure
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
* 1ee04fb (HEAD -> master, origin/master, origin/HEAD) Modified the tests to use mock functionality of get_child_port function under portconfig utility (#1464)
* 99d251f Enable PFCWD only on ports where PFC is enabled (#1508)
* eb7945f Warmboot script improvements - timeout exec, disable swss autorestart, remove trap (#1495)
* c7d4947 [show] Fix int status of LAGs, configured as Vlan members (#1478)
Signed-off-by: Maksym Belei <Maksym_Belei@jabil.com>
To improve management of docker-gbsyncd-vs. gbsyncd_startup.py simply spawned syncd processes and then exited. In that case, supervisord would no longer manage any processes in the container, and thus there was no way to know if a critical process had exited.
I recently created gbsyncdmgrd to be a more complete, robust replacement for gbsyncd_startup.py.
NOTE: This PR is dependent on the inclusion of gbsyncdmgrd in the sonic-sairedis repo. A submodule update is pending at
#7089
The default bgp connect retry timer is 120 seconds. A reconnection will happen 120 seconds if the initial connection fails. This PR aims to allow a more frequent retry.
The psample module was not loaded on barefoot platform. The loading of this module is a prerequisite for testing SFlow.
* add `.gitignore` to the `barefoot` subdirectory to overwrite ignore "platform/**/debian/*" in the root directory
Initialize fans and thermals lists on demand; make them properties in order to reduce Chassis object initialization time
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
Update sonic-sairedis submodule and also update sonic-swss submodule as there are interdependent changes.
* src/sonic-sairedis 13474d1...bc58b0f (12):
> Add gbsyncdmgrd; deprecate gbsyncd_startup.py (#809)
> Remove gbsyncd_start.sh (#808)
> [gbsyncd] Fix shebang in gbsyncd_startup.py; Make script executable (#807)
> [saiasiccmp] Add saiasiccmp tool to compare 2 asic views (#791)
> [configure] Add -Wno-psabi to remove "passing argument changed in GCC 7.1" (#799)
> Update FlexCounter.cpp, use m_pollInterval in MUTEX lock (#797)
> [vs] Add special warm boot logic to populate default attributes (#796)
> [ci]: add vstest (#795)
> [tests] Add macsec unittest (#782)
> [debian/control] libsairedis-dev depends on libzmq5-dev (#794)
> [ci]: use build template (#793)
> Rename duplicate file name (#773)
* src/sonic-swss 0b0d24c...5adb73e (47):
> Initialize system port type variable (#1681)
> [Dynamic Buffer Calc] Enhance the field checking in table handling (#1680)
> Handle the clear request for 'Q_SHARED_ALL' (#1653)
> [MuxOrch] FDB ageout safety check (#1674)
> Deactivate mirror session only when session status is true in updateLagMember (#1666)
> Revert "[buffermgr] Support maximum port headroom checking (#1607)" (#1675)
> reduce severity of log to info in case of flush on non-existing member (#1669)
> Revert "[Dynamic buffer calc] Bug fix: Remove PGs from an administratively down port. (#1652)" (#1676)
> [Dynamic buffer calc] Bug fix: Remove PGs from an administratively down port. (#1652)
> [acl] Move ACL table constants to acltable.h (#1671)
> [nbrmgrd] added function to parse IP address from APP_DB (#1672)
> [MUX/PFCWD] Use in_ports for acls instead of seperate ACL table (#1670)
> [vog/systemlag] Voq lagid allocator (#1603)
> Add table descriptions for dynamic buffer calculation to the documents (#1664)
> [vstest/subintf] Add vs test case to validate processing sequence of APPL DB keys (#1663)
> Remove vxlanmgrd dependency on orchagent (#1647)
> Keep attribute order in bulk mode (#1659)
> [mux] VS test for neigh, route and fdb (#1656)
> [linksync] Netdev oper status determination using IFF_RUNNING (#1568)
> [portorch] parse on/off value from autoneg (#1658)
> [intfsorch] Create subport with the entry contains necessary attributes (#1650)
> [ci]: Purge swss before install (#1654)
> Update StateDB with error if state change failed, Update APP_DB in all state chg req (#1662)
> Added changes to handle dependency check in FdbSyncd and FpmSyncd for warm-boot (#1556)
> [synchronous mode] Add failure notification for SAI failures in synchronous mode (#1596)
> [acl] Enable VLAN ID qualifier for ACL rules (#1648)
> Updated PFCWD to use single ACL table for PFCWD and MUX (#1620)
> [orchagent] Increase SAI REDIS response timeout to support FW upgrade during init (Mellanox only). (#1637)
> [vstest/nhg]: use dvs_route fixture to make test_nhg more robust
> [vstest]: add dvs_route fixture
> [vstest/subintf] Update vs tests to validate physical port host interface vlan tag attribute (#1634)
> Remove useless header in macsecorch (#1628)
> Add SAI_INGRESS_PRIORITY_GROUP_STAT_DROPPED_PACKETS counter, create new FlexCounter group (#1600)
> fixed unsupported resource issue (#1641)
> [test_virtual_chassis]: use wait_for to make test more robust (#1640)
> spell check fixes (#1630)
> [bufferorch] Handle NOT IMPLEMENTED status returned during set attr operation (#1639)
> [ci]: run vstest
> [test_virtual_chassis]: use wait_for function to improve test robustness
> [Mux] Neighbor handling based on FDB entry (#1631)
> [ci]: use build template (#1633)
> Log level change from ERR to INFO for fetch systemports issue (#1632)
> Migrate serdes programming to port serdes object (#1611)
> [tests] Remove legacy saiattributelist.h dependency (#1608)
> [buffermgr] Support maximum port headroom checking (#1607)
> Support shared headroom pool on top of dynamic buffer calculation (#1581)
> Fix the compiling errors in gcc9 (#1621)
- Why I did it
The existing Fan led and Psu led object initialize itself to green color in init method. However, there are multiple daemons calls sonic platform API and there could be a case that:
A PSU is removed from system
Reboot switch
psud detects that 1 PSU is missing and set PSU led to red
Other daemon just start up and call sonic platform API, the API set PSU led to green by call PsuLed.init
This PR is a partial fix for the issue. As we also need guarantee that the led is initialized with a correct value. I checked existing psud and thermalctld code. psud always initialize the PSU led color on boot up, thermalcltd need some changes to initialize led color on the first run
- How I did it
Remove the led color initialization code from FanLed.init and PsuLed.init
- How to verify it
Manual test
c20bf60 Qi Luo Mon Mar 15 14:28:31 2021 -0700 Implement rfc4363 FdbUpdater for lag inside vlan (#203)
292024a abdosi Mon Mar 15 12:15:21 2021 -0700 Updated lldpRemManAddrTable to use all the management ip address associated with interface. (#201)
9b83459 liushilongbuaa Fri Mar 12 14:35:23 2021 +0800 [CI] Setup dummy azure pipeline (#198)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* 553936b (HEAD, origin/master, origin/HEAD, master) route_check: Fix hanging & logging level (#1520)
* ed45412 [show][config] add support for setting and displaying switching modes on Y cable (#1501)
* bf46638 Handling error scenario of adding port to Vlan which is part of LAG (#1516)
* ae39883 Fix bug: show vlan config for vlan with no members (#1503)
* 3a482ac [test] Update unit test coverage for command 'show mac' (#1504)
* 4a0c010 [config] Disable/enable container monitoring when stopping/starting services (#1499)
Eliminate the need for `gbsyncd_start.sh`, which simply calls `exec "/usr/bin/gbsyncd_startup.py"`. The shell script is unnecessary.
Once this PR merges, we can remove `gbsyncd_start.sh` from the sonic-sairedis repo.
Why I did it
It was observed that on a multi-asic DUT bootup, the BGP internal sessions between ASIC's was taking more time to get ESTABLISHED than external BGP sessions. The internal sessions was coming up almost exactly 120 secs later.
In multi-asic platform the bgp dockers ( which is per ASIC ) on switch start are bring brought up around the same time and they try to make the bgp sessions with neighbors (in peer ASIC's) which may be not be completely up. This results in BGP connect fail and the retry happens after 120sec which is the default Connect Retry Timer
How I did it
Add the command to set the bgp neighboring session retry timer to 10sec for internal bgp neighbors.
- Why I did it
I made the docker_img_ctl.j2 applicable for more dockers (including application extensions dockers) by adding an option not to mount tmpfs on /tmp/ and /var/tmp/. In some applications /tmp/ is a different docker volume which can't be tmpfs.
Also, I added and ability to pass REPO[:TAG]|[@digest]/IMAGE_ID instead of just REPO name.
- How I did it
Modified docker_img_ctl.j2 and docker makefiles.
- How to verify it
Run it on the switch.
As discussed in the yang subgroup community meeting, this change is bring consistent naming-conventions for all different type of interfaces in sonic-yang-model. Particularly the key-attribute name. Since the relevant interface container does have a context about that interface, having a simple & clear key-attribute name will be sufficient. For e.g. PORT/PORT_LIST/port_name has been renamed as PORT/PORT_LIST/name. Similar changes are done for portchannel, VLAN & loopback interfaces as well.
There was a change to replace platform utils with sonic platform API in psuutil. However, psu API is not initialized on host side. The PR is to fix it.
- Why I did it
To allow SONiC Package Migration during SONiC-2-SONiC upgrade we need to start docker daemon in chroot-ed environment in new SONiC filesystem.
Later this script will be used to start dockerd in chroot environment on SONiC
- How I did it
Install a docker service script into /usr/lib/docker/ in SONiC filesystem.
- How to verify it
Install SONiC image on the switch, mount squashfs to some directory, mount overlay rw layer over squashfs, mount procfs and sysfs, mount docker library. Start the docker using:
root@sonic:~$ /usr/lib/docker/docker.sh start
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
Use udevadm to trigger the udev rules on the first boot
How to verify:
- Connect C0 with E1031;
- Install or upgrade the sonic os to 202012 branch;
- When access to sonic check if /dev/C0-1 to /dev/C0-48 are existed.
- Why I did it
To pick up new features and fix from SDK/FW and SAI
SDK/FW new Feature:
All | Added support for multiple modules and cable types. For full list contact Nvidia networking support
Spectrum-3 | SN46000C | Added support for up to 5W on ports 49 to 64 .
SDK/FW bugs' fix:
All | fast reboot | fast boot failure from latest 201811 to 201911 and above
Spectrum | 10GbE/1GbE Transceiver (FTLX8574D3BCV) stopped working after firmware upgrade
Spectrum-2 | When device is rebooted with locked Optical Transceivers in split mode, the firmware may get stuck
Spectrum-2 | SN3700 | When connecting at 200GbE to Ixia K400, Ixia receives CRC errors
Spectrum-2 | SN3800 | On rare occasions packets loss may be experienced due to signal integrity issues
Spectrum-2 | When the port is a member of a LAG, after a warmboot and port toggle on the peer-side, the port remains down
Spectrum-3 | SN4700 | While using Optic cable in Split 4x1 mode in PAM4, when two first ports are toggled, the other 2 ports go down
Spectrum-3 | SN4700 | When working in 400GbE, deleting the headroom configuration (changing buffer size to zero) on the fly may cause continual packet drops
SAI
All | sFlow | Use hardcoded value 1 as netlink group number ax expected by hsflowd
- How I did it
Update the related version number in the make files and update the submodule pointer accordingly.
- How to verify it
Run regression test and everything works good.
Features may be enabled/disabled for the same topology based on run-time
configuration. This PR adds the ability to enable/disable feature based
on config db data.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Parse the value `AutoNegotiation` element from the `LinkMetadata` section of minigraph file. If the element is present, an `autoneg` key will be added to the port in the `PORT` table of Config DB with a value of either `off` or `on`
If an `autoneg` value is present in port_config.ini, the value from the minigraph will take precedence, overriding that value.
Also remove `AutoNegotiation` and `EnableAutoNegotiation` elements from the `DeviceInfo` section, as we will use this data in the `LinkMetadata` section to determine whether to enable auto-negotiation for a port.
#### Why I did it
- Python3 compatibility changes for PDDF eeprom class
- Adding API for temperature in PDDF psu class
- PEP8 standard changes and adding missing method in PDDF sfp class
#### How I did it
- Using python3 to invoke the sonic_platform module in PDDF based platform
- Running autopep8 tool to comply to PEP8 standards
#### Why I did it
Recently, CLI sfputil replace the old sonic platform utils with sonic platform API. However, sonic platform API does not support SFP low power mode and reset related operation. The PR is to fix it.
The change to replace platform utils with sonic platform API was reverted on 202012, once this PR is merged, we can cherry-pick these two PRs to 202012 together.
#### How I did it
In low power mode and reset related operation, use "docker exec" if the command is running on host side.
* src/sonic-platform-daemons 068bccc...e5165b7 (7):
> [xcvrd] Fix crash: If 'dom_capability' not in port_info_dict, insert 'N/A' (#162)
> fix the muxcable state change notification received from other modules, omit the check inside hw_state table (#159)
> [xcvrd] Fix crash on platforms which support media settings with Python 3 (#158)
> [xcvrd] Save the dom_capability of transceiver into db (#72)
> [xcvrd] Fix xcvrd crash on other port prefixes (#123)
> [xcvrd] Make functions used for media setting python3 compatible (#153)
> [psud] Refactor unit tests; increase unit test coverage (#146)
Update FRR to 7.5.1. The following is a list of new commits.
```
df7ab485b FRRouting Release 7.5.1
f4ed841b8 Merge pull request #8187 from opensourcerouting/rpmfixes-75
86d5a20e3 Merge pull request #8193 from mjstapp/fix_signals_7_5
b339cc149 lib: avoid signal-handling race with event loop poll call
0f7b432c3 lib: add debug output for signal mask
c0290c86d lib: add sigevent_check api
7a5348665 doc: Fix CentOS 7 Documentation
2a8e69f48 Merge pull request #8064 from donaldsharp/foo
cf4d1a744 redhat: Fix changelog incorrect date format
b78dcb209 Merge pull request #8181 from idryzhov/7.5-zebra-blackhole
2032e7e72 zebra: don't use kernel nexthops for blackhole routes
e52003567 bgpd: When deleting a neighbor from a peer-group the PGNAME is optional
aa86a6a6f Merge pull request #8161 from mjstapp/fix_sa_7_5_backports
13a8efb4b Merge pull request #8156 from idryzhov/7.5-backports-2021-02-26
58911c6ed lib: Free memory leak in error path in clippy
556dfd211 lib: use right type for wconv() return val
bd9caa8f1 lib: fix some misc SA warnings
683b3fe3f lib: register dependency between control plane protocol and vrf nb nodes
b45248fb6 lib: add definitions for vrf xpaths
7b9f10d04 lib: add ability to register dependencies between northbound nodes
9c240815c bgpd: Bgp peer group issue
d1b43634b bgpd: upon bgp deletion, do not systematically ask to remove main bgp
f5d1dc55e bgpd: Fix crash when we don't have a nexthop
c2e463478 frr-reload: rpki context exiting uses exit and not end
f11db1698 bgpd: Blackhole nexthops are not reachable
c628e94ff staticd: fix vrf enabling
49b079ef1 staticd: fix nexthop creation and installation
0077038e9 staticd: fix nexthop validation
be3dfbbc7 zebra: use AF_INET for protocol family
```
- Why I did it
Update MFT tool version to 4.16.0
Bugs fixes:
mlxlink: Fixed an issue that caused the margin scan to fail with the following message: Eye scan not completed.
mlxcable: Cable firmware burning capability is not supported.
New features:
mlxlink: Enabled margin scan on Network links.
mlxlink: Added PRBS TX/RX polarity inversion using the following flags: --invert_tx_polarity / --invert_rx_polarity
- How I did it
Update MFT make file with new version number.
- How to verify it
Build image and test related functions on Mellanox platform
Incorporate the below changes in DellEMC Z9332F platform:
- Implemented watchdog platform API support
- Implement ‘get_position_in_parent’, ‘is_replaceable’ methods for all device types
- Change return type of SFP methods to match specification in sonic_platform_common/sfp_base.py
- Added platform.json file in device directory.
Co-authored-by: V P Subramaniam <Subramaniam_Vellalap@dell.com>
Closes issue #6982.
The issue was root caused as we were using the unix_socket for reading from DB as a default mechanism (#5250). The redis unix socket is created as follows.
admin@str--acs-1:~$ ls -lrt /var/run/redis/redis.sock
srwxrw---- 1 root redis 0 Mar 6 01:57 /var/run/redis/redis.sock
So it used to work fine for the user "root" or if user is part of redis group ( admin was made part of redis group by default )
Check if the user is with sudo permissions then use the redis unix socket, else fallback to tcp socket.
this PR updates the following commits in sonic-utilities
13ce4b6 [show][config] fix show mux status health field; add support for hwmode functionality to toggle mux, check mux direction for Y cable (#1467)
f78e7ce [acl-loader] Improve input validation for acl_loader (#1479)
748dbbf [show] Fix 'show mac' output, when FDB entry with Vlan 1 is present (#1368)
64604db [acl] Expand VLAN into VLAN members when creating an ACL table (#1475)
10de91d [config reload]: On dual ToR systems, cache ARP and FDB tables (#1465)
10a359a [Mellanox] Change mellanox buffer migrator for new SKU Mellanox-SN2700-D40C8S8 (#1470)
38c8e00 [acl-loader] Add support for matching on ICMP and VLAN info (#1469)
e555ea9 [SKU creator] fix wrong speed in case breakout of 2x50 (#1380)
4a78c01 [config] Enable/disable container monitoring when starting/stopping the services. (#1471)
dd3c2c3 [warm-reboot] Check if warm restart flag is set when issuing a warm-reboot (#1460)
e32b5ac Add soft-reboot reboot type (#1453)
8b3bc18 [reload] Improve reload by using sonic.target. (#1199)
99673bc [reboot] Add platform-specific reboot cause update hook (#1454)
2f6e36e [CLI][techsupport] Add NOOP option for commands that did not have that option (#1445)
1fa4b94 [psushow] Add more output columns; Add option to output in JSON format (#1416)
79ccd03 [show] cli support for show muxcable cableinfo (#1448)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
This package was outdated and did not properly install on buster due to dependency changes.
This version should work on all DCS-7280CR3*-32[PD]4 platforms.
Signed-off-by: Samuel Angebault <staphylo@arista.com>
