* [202012][Arista] Fix cmdline generation during warm-reboot from 201811/201911 (#11161)
Issue fixed: when performing a warm-reboot or fast-reboot from 201811 or 201911 to 202012 the kernel command line contains duplicate information. This issue is related to a change that was made to make 202012 boot0 file more futureproof.
A cold reboot brings everything back into a clean slate though not always desirable.
Changes done:
Added some logic to properly detect the end of the Aboot cmdline when cmdline-aboot-end delimiter is not set (clean case)
Added some logic to regenerate the Aboot cmdline when cmdline-aboot-end is set but duplicate parameters exists before (dirty case). Reorganized some code to handle duplicate parameter handling in the allowlist.
* Fix cmdline generation due to sonic_fips
Why I did it
Fix some unreliability seen on emmc device with some AMD CPUs
How I did it
Added a kernel parameter to add quirks to
It depends on a sonic-linux-kernel change to work properly but will be a no-op without it.
Description for the changelog
Add emmc quirks for Upperlake
* Fix to improve hostname handling
If config_db.json is missing hostname entry, hostname-config.sh ends
up deleting existing entry too and hostname changes to default 'localhost'
* default hostname to 'sonic` if missing in config file
* Add smartmontools to pmon docker
* Set smartmontools to install version 7.2-1 in pmon to match host; clean up smartmontools build files
* Add comments on smartmontools version for both host and pmon
Why I did it
Change the path of sonic submodules that point to "Azure" to point to "sonic-net"
How I did it
Replace "Azure" with "sonic-net" on all relevant paths of sonic submodules
Why I did it
BGP service has always been starting after interface-config. However, recently we discovered an issue where some BGP sessions are unable to establish due to BGP daemon not able to read the interface IP.
This issue was clearly observed after upgrading to FRR 8.2.2. See more details in #12380.
How I did it
Delaying starting BGP seems to be a workaround for this issue.
However, caution is that this delay might impact warm reboot timing and other timing sequences.
This workaround is reducing the probability of hitting the issue by close to 100X. However, this workaround is not bulletproof as test shows. It is still preferrable to have a proper FRR fix and revert this change in the future.
How to verify it
Continuously issuing config reload and check BGP session status afterwards.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
There's an odd crash that intermittently happens after the teamd container
exits, and a signal is raised to the main thread to exit. This thread (watching
teamd) continues execution because it's in a `while True`. The subsequent wait
call on the teamd container very likely returns immediately, and it calls
`is_warm_restart_enabled` and `is_fast_reboot_enabled`. In either of these
cases, sometimes, there is a crash in the transition from C code to Python code
(after the function gets executed). Python sees that this thread got a signal
to exit, because the main thread is exiting, and tells pthread to exit the
thread. However, during the stack unwinding, _something_ is telling the
unwinder to call `std::terminate`. The reason is unknown.
This then results in a python3 SIGABRT, and systemd then doesn't call the stop
script to actually stop the container (possibly because the main process exited
with a SIGABRT, so it's a hard crash). This means that the container doesn't
actually get stopped or restarted, resulting in an inconsistent state
afterwards.
The workaround appears to be that if we know the main thread needs to exit,
just return here, and don't continue execution. This at least tries to avoid it
from getting into the problematic code path. However, it's still feasible to
get a SIGABRT, depending on thread/process timings (i.e. teamd exits, signals
the main thread to exit, and then syncd exits, and syncd calls one of the two C
functions, potentially hitting the issue).
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
interfaces-config service restarts networking service, during the restart loopback interface address is being removed and reassigned back, leaving loopback without an ipv4 address for a while.
On SONiC startup and config reload interfaces-config and bgp services start in parallel and sometimes
fpmsyncd in bgp attempts bind to loopback while it does not have an address, fails with the log
Exception "Cannot assign requested address" had been thrown in daemon
and exits with rc 0.
root@sonic:/# supervisorctl status
fpmsyncd EXITED Jul 20 05:04 AM
zebra RUNNING pid 35, uptime 6:15:05
zsocket EXITED Jul 20 05:04 AM
docker logs bgp
INFO exited: fpmsyncd (exit status 0; expected)
With fpmsyncd dead, configured routes do not appear in the database.
- How I did it
Added ordering dependency on interfaces-config service into bgp.config
- How to verify it
Itself the issue reproduces quite rarely, but one can gain the time interval between networking down and networking up in interfaces-config.sh like this:
diff --git a/files/image_config/interfaces/interfaces-config.sh b/files/image_config/interfaces/interfaces-config.sh
index f6aa4147a..87caceeff 100755
--- a/files/image_config/interfaces/interfaces-config.sh
+++ b/files/image_config/interfaces/interfaces-config.sh
@@ -63,7 +63,11 @@ done
# Read sysctl conf files again
sysctl -p /etc/sysctl.d/90-dhcp6-systcl.conf
-systemctl restart networking
+# systemctl restart networking
+
+systemctl start networking
+sleep 10
+systemctl stop networking
# Clean-up created files
rm -f /tmp/ztp_input.json /tmp/ztp_port_data.json
with this change the issue reproduces on every config reload.
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
Multi-asic Docker instances are created behind Docker's default bridge
which doesn't allow talking to other Docker instances that are in the
host network (like database-chassis).
On linecards, we configure midplane interfaces to let per-asic docker
containers talk to CHASSIS_DB on the supervisor through internal chassis
network.
On the supervisor we don't need to use chassis internal network, but we
still need a similar setup in order to allow fabric containers to talk
to database-chassis
Manually cherry-picking #11893
- Why I did it
The timer execution may fail if triggered during a config reload (when the sonic.target is stopped). This might happen in a rare situation if config reload is executed after reboot in a small time slot (for 0 to 30 seconds) before the tacacs-config timer is triggered:
systemctl status tacacs-config.timer
tacacs-config.timer - Delays tacacs apply until SONiC has started
Loaded: loaded (/lib/systemd/system/tacacs-config.timer; enabled-runtime; vendor preset: enabled)
Active: failed (Result: resources) since Mon 2022-08-29 15:53:03 IDT; 1min 28s ago
Trigger: n/a
Triggers: tacacs-config.service
Aug 29 15:47:53 r-boxer-sw01 systemd[1]: Started Delays tacacs apply until SONiC has started.
Aug 29 15:53:03 r-boxer-sw01 systemd[1]: tacacs-config.timer: Failed to queue unit startup job: Transaction for tacacs-config.service/start is destructive (mgmt-framework.timer has 's>
Aug 29 15:53:03 r-boxer-sw01 systemd[1]: tacacs-config.timer: Failed with result 'resources'.
- How I did it
To ensure that timer execution will be resumed after a config reload the WantedBy section of the systemd service is updated to describe relation to sonic.target.
- How to verify it
Reboot the system
After reboot monitor tacacs-config.timer status. 30 seconds before timer activation run "config reload -y" command.
Check system status.
Signed-off-by: Oleksandr Ivantsiv <oivantsiv@nvidia.com>
* Pin version of bazelisk to v1.13.0
This tries to avoid builds failures due to the latest version of
bazelisk changing and causing hash mismatches.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
bazelisk package with hash value 1227b24db77557d552701f6add122edc is deleted from github release.
Reproducible build only cached hash value. Package file didn't be cached. Because they are in different pipelines.
Using latest package hash instead.
Why I did it
If the SWSS services was restarted, the MACsec service should also be restarted. Otherwise the data in wpa_supplicant and orchagent will not be consistent.
How I did it
Add dependency in docker-macsec.mk.
How to verify it
Manually check by 'sudo service swss restart'.
The MACsec container should be started after swss, the syslog will look like
Sep 8 14:36:29.562953 sonic INFO swss.sh[9661]: Starting existing swss container with HWSKU Force10-S6000
Sep 8 14:36:30.024399 sonic DEBUG container: container_start: BEGIN
...
Sep 8 14:36:33.391706 sonic INFO systemd[1]: Starting macsec container...
Sep 8 14:36:33.392925 sonic INFO systemd[1]: Starting Management Framework container...
Signed-off-by: Ze Gan <ganze718@gmail.com>
* [mux] skip mux operations during warm shutdown
- Enhance write_standby.py script to skip actions during warm shutdown.
- Expand the support to BGP service.
- MuX support was added by a previous PR.
- don't skip action during warm recovery
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
After pinging any failed IPv6 neighbor entries, set the remaining failed/incomplete entries to a permanent INCOMPLETE state. This manual setting to INCOMPLETE prevents these entries from automatically transitioning to FAILED state, and since they are now incomplete any subsequent NA messages for these neighbors is able to resolve the entry in the cache.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
It could happen that a container has already crashed but docker-wait-any
will wait forever till it starts. It should, however, immediately exit
to make the serivce restart.
#### Why I did it
It is observed in some circumstances that the auto-restart mechanism does not work. Specifically for ```swss.service```, ```orchagent``` had crashed before ```docker-wait-any``` started in ```swss.sh```. This led ```docker-wait-any``` wait forever for ```swss``` to be in ```"Running"``` state and it results in:
```
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
1abef1ecebff bcbca2b74df6 "/usr/local/bin/supe…" 22 hours ago Up 22 hours what-just-happened
3c924d405cd5 docker-lldp:latest "/usr/bin/docker-lld…" 22 hours ago Up 22 hours lldp
eb2b12a98c13 docker-router-advertiser:latest "/usr/bin/docker-ini…" 22 hours ago Up 22 hours radv
d6aac4a46974 docker-sonic-mgmt-framework:latest "/usr/local/bin/supe…" 22 hours ago Up 22 hours mgmt-framework
d880fd07aab9 docker-platform-monitor:latest "/usr/bin/docker_ini…" 22 hours ago Up 22 hours pmon
75f9e22d4fdd docker-snmp:latest "/usr/local/bin/supe…" 22 hours ago Up 22 hours snmp
76d570a4bd1c docker-sonic-telemetry:latest "/usr/local/bin/supe…" 22 hours ago Up 22 hours telemetry
ee49f50344b3 docker-syncd-mlnx:latest "/usr/local/bin/supe…" 22 hours ago Up 22 hours syncd
1f0b0bab3687 docker-teamd:latest "/usr/local/bin/supe…" 22 hours ago Up 22 hours teamd
917aeeaf9722 docker-orchagent:latest "/usr/bin/docker-ini…" 22 hours ago Exited (0) 22 hours ago swss
81a4d3e820e8 docker-fpm-frr:latest "/usr/bin/docker_ini…" 22 hours ago Up 22 hours bgp
f6eee8be282c docker-database:latest "/usr/local/bin/dock…" 22 hours ago Up 22 hours database
```
The check for ```"Running"``` state is not needed because for cold boot case we do ```start_peer_and_dependent_services``` and for warm boot case the loop will retry to wait for container if this container is doing warm boot:
d01a91a569/files/image_config/misc/docker-wait-any (L56)
#### How I did it
Removed the check for ```"Running"```.
#### How to verify it
Kill swss before ```docker-wait-any``` is reached and verify auto restart will restart swss serivce.
As part of PR #11754
Change was added to use variable SONIC_DB_NS_CLI for
namespace but that will not work since ./files/scripts/syncd_common.sh
uses SONIC_DB_CLI. So revert back to use SONIC_DB_CLI and define new
variable for SONIC_GLOBAL_DB_CLI for global/host db cli access
Also fixed DB_CLI not working for namespace.
Added initial set of config files to allow for booting and partial traffic testing in SONiC on the 720DT-48S.
How to verify it
- Switch boots
- show interfaces status shows links up on interfaces Ethernet24-51
- Traffic flows with no errors on interfaces Ethernet24-51
Change `sxdkernel start` to `sxdkernel restart`. If `syncd` service crashes in `ExecStartPre` systemd will not call `ExecStop` and thus will not call `sxdkernel stop`. Use of `sxdkernel restart` is more robust in terms of guarantees to restore the system after unexpected crashes.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
On a supervisor card in a chassis, syncd/teamd/swss/lldp etc dockers are created for each Switch Fabric card. However, not all chassis would have all the switch fabric cards present. In this case, only dockers for Switch Fabrics present would be created.
The monit 'container_checker' fails in this scenario as it is expecting dockers for all Switch Fabrics (based on NUM_ASIC defined in asic.conf file).
This was done manually, to try to get past a build error due to changing
package versions in Debian.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did:
In case of multi-asic platforms gbsyncd is not getting added to Feature Table of Host Config DB. Without this container_checker complains of not needed gbsyncd container's are running.
How I did:
Update Both Host and Namespace config db when gbsyncd docker is starting.
How I verify:
Verified on Multi-asic platforms.
bgp should be a per-asic service, and runs for each namespace on
multi-asic platforms. However, putting bgp in MULTI_INST_DEPENDENT
causes swss to be restarted as well as bgp. this is causing issues after #11000
Issue: #11653
This fix:
removes bgp from dependents list
adds a conditional that either adds bgp, or bgp@$DEV to separate
between single and multi-asic platforms
Cherry pick PR https://github.com/sonic-net/sonic-buildimage/pull/10825 to 202205 branch
#### Why I did it
Fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/sonic-net/sonic-buildimage/issues/10218
ETA of this issue will be 2022/05/31
#### How I did it
Re-write sonic-cli with c++ in sonic-swss-common: https://github.com/sonic-net/sonic-swss-common/pull/607
Modify swss-common rules and slave.mk to install c++ version sonic-db-cli.
#### How to verify it
Pass all E2E test scenario.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
Build and install c++ version sonic-db-cli from swss-common.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
In arp_update, check for FAILED or INCOMPLETE kernel neighbor entries and manually ping them to try and resolve the neighbor
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
When using trap on SIGTERM the script will not react to the SIGTERM signal sent while a child is executing.
I.e, the following script does not react on SIGTERM sent to it if it is
waiting for sleep to finish:
```
trap "echo Handled SIGTERM" 0 2 3 15
echo "Before sleep"
sleep inf
echo "After sleep"
```
Instead, trap only on EXIT which covers also a scenario with exit on
SIGINT, SIGTERM.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
The initial value has to be present for the state machines to work. In active-standby dual-tor scenario, or any hardware mux scenario, the value will be updtaed eventually with a delay.
However, in active-active dual-tor scenario, there is no other mechanism to initialize the value and get state machines started.
So this script will have to write something at start up time.
For active-active dualtor, 'active' is a more preferred initial value, the state machine will switch the state to standby soon if
link prober found link not in good state.
How I did it
Update the script to always provide initial values.
How to verify it
Tested on active-active dual-tor testbed.
Signed-off-by: Ying Xie ying.xie@microsoft.com
*Preventing ebtables rules to be applied on KVM image. The ebtables rules in SONiC are added to prevent ARP as well as L2 forwarding to be blocked in linux kernel since the hardware will take care of the actual L2 forward. However this is not the case with KVM where linux needs to forward even L2 packets
A change in sonic-utilities makes all cache files be saved into a
/tmp/cache. On swss restart this cache has to be removed in case swss
starts in cold or fast mode. A related cache restoration in the warmboot
finalizer script is also updated to use new location.
- Why I did it
To fix#9817. Clear the cache directory on swss.sh except for warm start.
Also, adopted finalize-warmboot script to take the cache directory.
- How I did it
A change in sonic-utilities makes all cache files be saved into a /tmp/cache. On swss restart this cache has to be removed in case swss starts in cold or fast mode. A related cache restoration in the warmboot finalizer script is also updated to use new location.
- How to verify it
Run togather with Azure/sonic-utilities#2232. Verify counters cache is removed on config reload, cold/fast reboots, swss restart.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
What I did:
Added bgp as a dependent of swss
Why I did it:
bgp container was not restarting on swss crash. When swss crashes, linkmgrd
doesn't initate a switchover because it cannot access the default route from
orchagent. Bringing down bgp with swss will isolate the ToR, causing linkmgrd
to initiate a switchover to the peer ToR avoiding significant packet loss.
How I did it:
Added bgp to DEPENDENT
Signed-off-by: Nikola Dancejic <ndancejic@microsoft.com>
Spanning from sonic-net/sonic-linkmgrd#76, this PR is to update warm restart finalizer to wait for linkmgrd to be reconciled.
sign-off: Jing Zhang zhangjing@microsoft.com
Why I did it
To make sure finalizer save config after linkmgrd's reconciliation.
How I did it
Add linkmgrd to the reconciliation wait list of warmboot finalizer.
How to verify it
Verified on lab device, linkmgrd reconciled as expected.
Fix in Monit memory_checker plugin. Skip fetching running containers if docker engine is down (can happen in deinit).
This PR fixes issue #11472.
Signed-off-by: liora liora@nvidia.com
Why I did it
In the case where Monit runs during deinit flow, memory_checker plugin is fetching the running containers without checking if Docker service is still running. I added this check.
How I did it
Use systemctl is-active to check if Docker engine is still running.
How to verify it
Use systemctl to stop docker engine and reload Monit, no errors in log and relevant print appears in log.
Which release branch to backport (provide reason below if selected)
The fix is required in 202205 and 202012 since the PR that introduced the issue was cherry picked to those branches (#11129).
What I did:
Following changes done for packet based chassis:-
1> Run arp_update on LC's to resolve static route nexthops over backend
port-channel interfaces.
2> On Supervisor make sure arp_update exit gracefully
- Why I did it
Support Mellanox-SN4600C-C64 as T1 switch in dual-ToR scenario
This is to port #11032 and #11299 from 202012 to master.
Support additional queue and PG in buffer templates, including both traditional and dynamic model
Support mapping DSCP 2/6 to lossless traffic in the QoS template.
Add macros to generate additional lossless PG in the dynamic model
Adjust the order in which the generic/dedicated (with additional lossless queues) macros are checked and called to generate buffer tables in common template buffers_config.j2
Buffer tables are rendered via using macros.
Both generic and dedicated macros are defined on our platform. Currently, the generic one is called as long as it is defined, which causes the generic one always being called on our platform. To avoid it, the dedicated macrio is checked and called first and then the generic ones.
Support MAP_PFC_PRIORITY_TO_PRIORITY_GROUP on ports with additional lossless queues.
On Mellanox-SN4600C-C64, buffer configuration for t1 is calculated as:
40 * 100G downlink ports with 4 lossless PGs/queues, 1 lossy PG, and 3 lossy queues
16 * 100G uplink ports with 2 lossless PGs/queues, 1 lossy PG, and 5 lossy queues
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
This PR is to add a flag to control whether to generate PORT_QOS_MAP|global entry or not.
It's because for some HWSKU, such as BackEndToRRouter and BackEndLeafRouter, there is no DSCP_TO_TC_MAP defined.
Hence, if the PORT_QOS_MAP|global entry is generated, OA will report some error because the DSCP_TO_TC_MAP map AZURE can not be found.
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- saiObjectTypeQuery: invalid object id oid:0x7fddb43605d0
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- meta_generic_validation_objlist: SAI_SWITCH_ATTR_QOS_DSCP_TO_TC_MAP:SAI_ATTR_VALUE_TYPE_OBJECT_ID object on list [0] oid 0x7fddb43605d0 is not valid, returned null object id
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- applyDscpToTcMapToSwitch: Failed to apply DSCP_TO_TC QoS map to switch rv:-5
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- doTask: Failed to process QOS task, drop it
This PR is to address the issue.
How I did it
Add a flag require_global_dscp_to_tc_map to control whether to generate the PORT_QOS_MAP|global entry. The default value for require_global_dscp_to_tc_map is true. If the device type is storage backend, the value is changed to false. Then the PORT_QOS_MAP|global entry is not generated.
How to verify it
Update the current test_qos_dscp_remapping_render_template to cover storage backend.
Why I did it
Storage backend has all vlan members tagged. If untagged packets are received on those links, they are accounted as RX_DROPS which can lead to false alarms in monitoring tools. Using this acl to hide these drops.
How I did it
Created a acl template which will be loaded during minigraph load for backend. This template will allow tagged vlan packets and dropped untagged
How to verify it
Unit tests
Signed-off-by: Neetha John <nejo@microsoft.com>
- Why I did it
New security feature for enforcing strong passwords when login or changing passwords of existing users into the switch.
- How I did it
By using mainly Linux package named pam-cracklib that support the enforcement of user passwords, the daemon named hostcfgd, will support add/modify password policies that enforce and strengthen the user passwords.
- How to verify it
Manually Verification-
1. Enable the feature, using the new sonic-cli command passw-hardening or manually add the password hardening table like shown in HLD by using redis-cli command
2. Change password policies manually like in step 1.
Notes:
password hardening CLI can be found in sonic-utilities repo-
P.R: Add support for Password Hardening sonic-utilities#2121
code config path: config/plugins/sonic-passwh_yang.py
code show path: show/plugins/sonic-passwh_yang.py
3. Create a new user (using adduser command) or modify an existing password by using passwd command in the terminal. And it will now request a strong password instead of default linux policies.
Automatic Verification - Unitest:
This PR contained unitest that cover:
1. test default init values of the feature in PAM files
2. test all the types of classes policies supported by the feature in PAM files
3. test aging policy configuration in PAM files
Avoid write_standby in warm restart context.
sign-off: Jing Zhang zhangjing@microsoft.com
Why I did it
In warm restart context, we should avoid mux state change.
How I did it
Check warm restart flag before applying changes to app db.
How to verify it
Ran write_standby in table missing, key missing, field missing scenarios.
Did a warm restart, app db changes were skipped. Saw this in syslog:
WARNING write_standby: Taking no action due to ongoing warmrestart.
Signed-off-by: bingwang <wang.bing@microsoft.com>
Why I did it
This PR brings two changes
Add lossy PG profile for PG2 and PG6 on T1 for ports between T1 and T2.
After PR Update qos config to clear queues for bounced back traffic #10176 , the DSCP_TO_TC_MAP and TC_TO_PG_MAP is updated when remapping is enable
DSCP_TO_TC_MAP
Before After Why do this change
"2" : "1" "2" : "2" Only change for leaf router to map DSCP 2 to TC 2 as TC 2 will be used for lossless TC
"6" : "1" "6" : "6" Only change for leaf router to map DSCP 6 to TC 6 as TC 6 will be used for lossless TC
TC_TO_PRIORITY_GROUP_MAP
Before After Why do this change
"2" : "0" "2" : "2" Only change for leaf router to map TC 2 to PG 2 as PG 2 will be used for lossless PG
"6" : "0" "6" : "6" Only change for leaf router to map TC 6 to PG 6 as PG 6 will be used for lossless PG
So, we have two new lossy PGs (2 and 6) for the T2 facing ports on T1, and two new lossless PGs (2 and 6) for the T0 facing port on T1.
However, there is no lossy PG profile for the T2 facing ports on T1. The lossless PGs for ports between T1 and T0 have been handled by buffermgrd .Therefore, We need to add lossy PG profiles for T2 facing ports on T1.
We don't have this issue on T0 because PG 2 and PG 6 are lossless PGs, and there is no lossy traffic mapped to PG 2 and PG 6
Map port level TC7 to PG0
Before the PCBB change, DSCP48 -> TC 6 -> PG 0.
After the PCBB change, DSCP48 -> TC 7 -> PG 7
Actually, we can map TC7 to PG0 to save a lossy PG.
How I did it
Update the qos and buffer template.
How to verify it
Verified by UT.
Why I did it
Support to use symbol links in platform folder to reduce the image size.
The current solution is to copy each lazy installation targets (xxx.deb files) to each of the folders in the platform folder. The size will keep growing when more and more packages added in the platform folder. For cisco-8000 as an example, the size will be up to 2G, while most of them are duplicate packages in the platform folder.
How I did it
Create a new folder in platform/common, all the deb packages are copied to the folder, any other folders where use the packages are the symbol links to the common folder.
Why platform.tar?
We have implemented a patch for it, see #10775, but the problem is the the onie use really old unzip version, cannot support the symbol links.
The current solution is similar to the PR 10775, but make the platform folder into a tar package, which can be supported by onie. During the installation, the package.tar will be extracted to the original folder and removed.
- Why I did it
When LLDP is disabled through feature command, it gets spawned after reboot.
- How I did it
In syncd.sh check if the service is enabled before spawning automatically during cold reboot.
- How to verify it
Disable lldp feature. Perform cold reboot and verify its not spawned.
Signed-off-by: bingwang <bingwang@microsoft.com>
Why I did it
This PR is to add two extra lossless queues for bounced back traffic.
HLD sonic-net/SONiC#950
SKUs include
Arista-7050CX3-32S-C32
Arista-7050CX3-32S-D48C8
Arista-7260CX3-D108C8
Arista-7260CX3-C64
Arista-7260CX3-Q64
How I did it
Update the buffers.json.j2 template and buffers_config.j2 template to generate new BUFFER_QUEUE table.
For T1 devices, queue 2 and queue 6 are set as lossless queues on T0 facing ports.
For T0 devices, queue 2 and queue 6 are set as lossless queues on T1 facing ports.
Queue 7 is added as a new lossy queue as DSCP 48 is mapped to TC 7, and then mapped into Queue 7
How to verify it
Verified by UT
Verified by coping the new template and generate buffer config with sonic-cfggen
Signed-off-by: Yong Zhao yozhao@microsoft.com
Why I did it
This PR aims to fix an issue (#10088) by enhancing the script memory_checker.
Specifically, if container is not created successfully during device is booted/rebooted, then memory_checker do not need check its memory usage.
How I did it
In the script memory_checker, a function is added to get names of running containers. If the specified container name is not in current running container list, then this script will exit without checking its memory usage.
How to verify it
I tested on a lab device by following the steps:
Stops telemetry container with command sudo systemctl stop telemetry.service
Removes telemetry container with command docker rm telemetry
Checks whether the script memory_checker ran by Monit will generate the syslog message saying it will exit without checking memory usage of telemetry.
- Why I did it
Recent change to delay PMON service in case of fast/warm reboot introduce an issue when restarting only SWSS service after fast/warm reboot for Nvidia platform.
Since the timer is triggered only when the system boot, in a scenario when the system is after a fast/warm reboot and the user restart SWSS service, as part of syncd.sh script, PMON service will stop but the timer will not start again.
- How I did it
On syncd.sh script, in case of fast/warm indication, check if pmon.timer is running.
If it is running it means we are at the first boot and continue normally.
If it is not running, meaning the service was restarted, start the timer to keep the system behavior consistent.
- How to verify it
Run fast/warm reboot.
service swss restart.
Observe PMON service starting.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* When reloading config after crashes, VTEP interfaces are sometimes not created since the tunnel still exists in the STATE_DB.
* Adding VXLAN_TUNNEL_TABLE to the list of tables to be cleaned in swss.sh fixes the problem.
- Why I did it
Yang Model about password hardening feature, the sonic CLI of this feature was autogenerated from this Yang model
- How I did it
Create new Yang model in src/sonic-yang-models/yang-models/sonic-passwh.yang.
- How to verify it
There are unitests(yang test) in this P.R covering all the passwords policies with good and bad values cases.
Or is possible manually using the config/show password commands that were autogenerated from this Yang model. (this CLI code added in sonic-utilities)
This reverts commit 15cf9b0d70.
Why I did it
Revert the PR #10775, for it has impact on onie installation.
It is caused by the symbol links not supported in some of the onie unzip.
We will enable after fixing the issue, see #10914
What/Why I did:
Issue1: By setting up of ipvlan interface in interface-config.sh we are not tolerant to failures. Reason being interface-config.service is one-shot and do not have restart capability.
Scenario: For example if let's say database service goes in fail state then interface-services also gets failed because of dependency check but later database service gets restart but interface service will remain in stuck state and the ipvlan interface nevers get created.
Solution: Moved all the logic in database service from interface-config service which looks more align logically also since the namespace is created here and all the network setting (sysctl) are happening here.With this if database starts we recreate the interface.
Issue 2: Use of IPVLAN vs MACVLAN
Currently we are using ipvlan mode. However above failure scenario is not handle correctly by ipvlan mode. Once the ipvlan interface is created and ip address assign to it and if we restart interface-config or database (new PR) service Linux Kernel gives error "Error: Address already assigned to an ipvlan device." based on this:https://github.com/torvalds/linux/blob/master/drivers/net/ipvlan/ipvlan_main.c#L978Reason being if we do not do cleanup of ip address assignment (need to be unique for IPVLAN) it remains in Kernel Database and never goes to free pool even though namespace is deleted.
Solution: Considering this hard dependency of unique ip macvlan mode is better for us and since everything is managed by Linux Kernel and no dependency for on user configured IP address.
Issue3: Namespace database Service do not check reachability to Supervisor Redis Chassis Server.
Currently there is no explicit check as we never do Redis PING from namespace to Supervisor Redis Chassis Server. With this check it's possible we will start database and all other docker even though there is no connectivity and will hit the error/failure late in cycle
Solution: Added explicit PING from namespace that will check this reachability.
Issue 4:flushdb give exception when trying to accces Chassis Server DB over Unix Sokcet.
Solution: Handle gracefully via try..except and log the message.
Why I did it
At present, there is no mechanism in an event driven model to know that the system is up with all the essential sonic services and also, all the docker apps are ready along with port ready status to start the network traffic. With the asynchronous architecture of SONiC, we will not be able to verify if the config has been applied all the way down to the HW. But we can get the closest up status of each app and arrive at the system readiness.
How I did it
A new python based system monitor tool is introduced under system-health framework to monitor all the essential system host services including docker wrapper services on an event based model and declare the system is ready. This framework gives provision for docker apps to notify its closest up status. CLIs are provided to fetch the current system status and also service running status and its app ready status along with failure reason if any.
How to verify it
"show system-health sysready-status" click CLI
Syslogs for system ready
Why I did it
To upgrade SSD firmware in initramfs while rebooting from SONiC to SONiC and during NOS to SONiC migration.
How I did it
New option 'ssd-upgrader-part’ is introduced in grub command line, to indicate the partition and its filesystem type in which the SSD firmware updater is present. ‘ssd-upgrader-part’ syntax is ssd-upgrader-part=<partition>,<filesystem type>. Example: ssd-upgrader-part=/dev/sda8,ext4
A new initramfs script ‘ssd-upgrade’ is included in init-premount and it invokes the SSD firmware updater (ssd-fw-upgrade) present in the partition indicated by the boot option 'ssd-upgrader-part'
How to verify it
In SONiC, the SSD firmware updater is copied to “/host/” directory.
Fast-reboot is to be initiated with the ‘-u’ option ([scripts/fast-reboot] Add option to include ssd-upgrader-part boot option with SONiC partition sonic-utilities#2150)
After reboot, while booting into SONiC the SSD firmware updater will be executed in initramfs.
Why I did it
The image size is too large, when there are multiple lazy packages and multiple platforms. It is not necessary to keep the lazy installation packages in multiple copies.
For cisco image, the image size will reduce from 3.5G to 1.7G.
How I did it
Use symbol links to only keep one package for each of the lazy package.
Make a new folder fsroot/platform/common
Copy the lazy packages into the folder.
When using a package in each of the platform, such as x86_64-grub, x86_64-8800_rp-r0, x86_64-8201_on-r0, etc, only make a symbol link to the package in the common folder.
Why I did it
The PR is aimed to fix a bug that mgmt port eth0 may loss IP even if user configured static IP of eth0. This is not a always reproduceable issue, the reproducing flow is like:
Systemd starts networking service, which runs a dhcp based configuration and assigned an ip from dhcp.
Systemd starts interface-config service who depends on networking service
Interface-config service runs command “ifdown –force eth0”, check line. but networking service is still running so that this line failed with error: “error: Another instance of this program is already running.”. This error is printed by ifupdown2 lib who is the main process of networking service. So, ifdown actually does not work here, the ip of eth0 is not down.
Interface-config service updates /etc/networking/interface to static configuration.
Interface-config service runs command “systemctl restart networking”. This command kills the previous networking related processes (log: networking.service: Main process exited, code=killed, status=15/TERM), and try to reconfigure the ip address with static configuration. But it detects that the configured IP and the existing IP are the same, and it does not really configure the ip to kernel. Hence, the ip is still getting from dhcp. (this could be a bug of ifupdown2: previous ip is from dhcp, new ip is a static ip, it treats them as same instead of re-configuring the IP)
When the lease of the ip expires, the ip of eth0 is removed by kernel and the issue reproduces.
The issue is not always reproduceable because networking service usually runs fast so that it won't hit step#3.
How I did it
Check networking service state before running "ifdown –force eth0", wait for it done if it is activating.
How to verify it
Manual test.
- Why I did it
Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time.
This parallel execution consume CPU time and the duration of create_switch is longer than it should be.
Following this finding, and the motivation to ensure these services will not interfere in the future, PMON is delayed in 90 seconds until the system finish the init flow after fastboot.
- How I did it
Add a timer for PMON service.
Exclude for MLNX platform the start trigger of PMON when SYNCD starts in case of fastboot.
Copy the timer file to the host bin image.
- How to verify it
Run fast-reboot on MLNX platform and observe faster create_switch execution time.
- Why I did it
Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time.
This parallel execution consume CPU time and the duration of create_switch is longer than it should be.
Following this finding, and the motivation to ensure these services will not interfere in the future, LLDP is delayed in 90 seconds until the system finish the init flow after fastboot.
- How I did it
Add a timer for LLDP service.
Copy the timer file to the host bin image.
- How to verify it
Run fast-reboot on MLNX platform and observe faster create_switch execution time.
This PR is dependent on PR: #10567
Why I did it
Can not start sonic-hostservice
How I did it
Install python3-dbus and systemd-python, and replace invalid path
How to verify it
Start the service with below commands:
sudo systemctl start sonic-hostservice
sudo systemctl status sonic-hostservice
Signed-off-by: Gang Lv ganglv@microsoft.com
* Remove SSH host keys after installing the custom version of sshd
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Use an override for for sshd instead of overwriting the service file
Don't overwrite upstream's .service file, and instead use an override
file for making sure the host key(s) are generated.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
Why I did it
This PR aims to fix the Monit issue which shows Monit can't reset its counter when monitoring memory usage of telemetry container.
Specifically the Monit configuration file related to monitoring memory usage of telemetry container is as following:
check program container_memory_telemetry with path "/usr/bin/memory_checker telemetry 419430400"
if status == 3 for 10 times within 20 cycles then exec "/usr/bin/restart_service telemetry"
If memory usage of telemetry container is larger than 400MB for 10 times within 20 cycles (minutes), then it will be restarted.
Recently we observed, after telemetry container was restarted, its memory usage continuously increased from 400MB to 11GB within 1 hour, but it was not restarted anymore during this 1 hour sliding window.
The reason is Monit can't reset its counter to count again and Monit can reset its counter if and only if the status of monitored service was changed from Status failed to Status ok. However, during this 1 hour sliding window, the status of monitored service was not changed from Status failed to Status ok.
Currently for each service monitored by Monit, there will be an entry showing the monitoring status, monitoring mode etc. For example, the following output from command sudo monit status shows the status of monitored service to monitor memory usage of telemetry:
Program 'container_memory_telemetry'
status Status ok
monitoring status Monitored
monitoring mode active
on reboot start
last exit value 0
last output -
data collected Sat, 19 Mar 2022 19:56:26
Every 1 minute, Monit will run the script to check the memory usage of telemetry and update the counter if memory usage is larger than 400MB. If Monit checked the counter and found memory usage of telemetry is larger than 400MB for 10 times
within 20 minutes, then telemetry container was restarted. Following is an example status of monitored service:
Program 'container_memory_telemetry'
status Status failed
monitoring status Monitored
monitoring mode active
on reboot start
last exit value 0
last output -
data collected Tue, 01 Feb 2022 22:52:55
After telemetry container was restarted. we found memory usage of telemetry increased rapidly from around 100MB to more than 400MB during 1 minute and status of monitored service did not have a chance to be changed from Status failed to Status ok.
How I did it
In order to provide a workaround for this issue, Monit recently introduced another syntax format repeat every <n> cycles related to exec. This new syntax format will enable Monit repeat executing the background script if the error persists for a given number of cycles.
How to verify it
I verified this change on lab device str-s6000-acs-12. Another pytest PR (Azure/sonic-mgmt#5492) is submitted in sonic-mgmt repo for review.
The interface renaming logic fails if one interface is missing.
Because of the `set -e` the whole initramfs hook would abort early on
error.
This change fixes the current behavior to make sure missing interfaces
are properly skipped and ensure existing interface are renamed.
Fix the issues #10501 and #9733
If having gearbox, we need:
* add gbsyncd as a peer since swss also has dependency on gbsyncd
* add service gbsyncd to FEATURE table if it is missing
Why I did it
To support address sanitizer for Mellanox syncd
How I did it
/var/log/asan is mapped for syncd container (the same as for swss)
container stop() has a timeout (60s) for syncd (the same as for swss)
This is so libasan has enough time to generate a report.
added ASAN's log path to Mellanox syncd supervisord.conf
added "asan: yes" to sonic_version.yml
How to verify it
Added artificial memory leaks
Compiled with ENABLE_ASAN=y
Installed the image on DUT
Rebooted the DUT
Verified that /var/log/asan/syncd-asan.log contains the leaks
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
If it is run during image install, it's not guaranteed that the
installation environment will have tune2fs available. Therefore, run it
during initramfs instead.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
In the bringup of tomahawk4/trident4, we realized that such chips need a larger size of /dev/shm in syncd container, so we added the option --shm-size to the docker create for syncd. The default value for shm-size is 64m; after this change, people can add SYNCD_SHM_SIZE=128m to platform_env.conf to change it to 128m.
How to verify it
We verified that after this change, 1) on existing platforms without platform_env.conf, the size of /dev/shm in syncd container (df -h | grep shm) is still the default 64M; 2) after we add SYNCD_SHM_SIZE=128m to platform_env.conf, /dev/shm in syncd becomes 128M.
- Why I did it
Fixes#9628
During bootup, this error log is seen
Dec 22 04:26:29 sonic interfaces-config.sh[2546]: error: main exception: cannot find interfaces: eth0 (interface was probably never up ?)
This is of non-functional nature and doesn't affect the flow.
- How I did it
Dont take the ifdown if not needed
- How to verify it
Verified during reboot. Log did not appear and IP was acquired on eth0 as expected
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
To reduce the processing time of rc.local, refactoring s6100 platform initialization.
Porting changes from 202012 branch [202012] Refactoring DELL platform init to reduce rc.local processing time #10171
Why I did it
[Build]: Fix armhf mirrors not existing issue
The mirror endpoint debian-archive.trafficmanager.net does not support armhf, change to use deb.debian.org and security.debian.org.
Why I did it
improvement of starting barefoot SDK
How I did it
restart of the interface for cleaning txquee through which communication takes place between Sonic and openBMC
How to verify it
run sonic autorestart tests
On some products the pci enumeration adds randomness into which nic gets
initialized first.
Because SONiC doesn't use deterministic interface naming but instead old
style interface naming, this leads to eth0 not always being the
management port.
To make sure eth0 is always the management port (SONiC expectation)
rename the interfaces in the initramfs for Arista products.
# Why I did it
Reduce the disk space taken up during bootup and runtime.
# How I did it
1. Remove python package cache from the base image and from the containers.
2. During bootup, if logs are to be stored in memory, then don't create the `var-log.ext4` file just to delete it later during bootup.
3. For the partition containing `/host`, don't reserve any blocks for just the root user. This just makes sure all disk space is available for all users, if needed during upgrades (for example).
* Remove pip2 and pip3 caches from some containers
Only containers which appeared to have a significant pip cache size are
included here.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Don't create var-log.ext4 if we're storing logs in memory
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Run tune2fs on the device containing /host to not reserve any blocks for just the root user
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This can save 6 sec for teamd LAG restoration - the time between:
```
Mar 9 13:51:10.467757 r-panther-13 WARNING teamd#teamd_PortChannel1[28]: Got SIGUSR1.
Mar 9 13:52:33.310707 r-panther-13 INFO teamd#teamd_PortChannel1[27]: carrier changed to UP
```
- Why I did it
Optimize warm boot. Specifically reduce the time needed for LAG restoration.
- How I did it
Kill teamd docker after graceful shutdown of teamd processes.
- How to verify it
Run warm reboot.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
The marvel-armhf build is hung, it does not exit after waiting for a long time.
It is caused by the process /etc/entropy.py which is started by the postinst script in target/debs/buster/sonic-platform-nokia-7215_1.0_armhf.deb
When mounting the partition that contains `/host` during initramfs, the
mount binary available there (coming from busybox) tries each filesystem
in `/proc/filesystems` and sees which one succeeds. During this time,
there may be some error messages logged into dmesg because some of the
incorrect filesystems failed to mount the partition.
Specify the filesystem type explicitly so that initramfs knows it's that
type, and we know what filesystem will always get used there.
Fixes#9998
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
To implement blocking feature state change.
- How I did it
Record the actual feature state in STATE DB from hostcfg.
- How to verify it
UT + verification by running on the switch and checking STATE DB.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
In parallel of this change Arista added a custom logrotate configuration as part of its driver library.
Having 2 logrotate configuration for the same log file triggers an issue.
Fixesaristanetworks/sonic#38
How I did it
Arista merged a few changes in sonic-buildimage which added a logrotate configuration aristanetworks/sonic@e43c797
It is therefore the right path to remove the arista.log line from the logrotate.d/rsyslog configuration.
How to verify it
Logrotate works without any error message, arista log rotation happens and arista daemons still append logs once file was truncated.
Why I did it
Smartmontools 6.6 has an issue with reading SMART info of nvme SSD
Smartmontools can be installed with apt-get, no need to build and install
How I did it
Use apt-get to install smartmontools 7.2-1
Remove previous make files for smartmontools 6.6
How to verify it
verify with "smartctl" can read out correct SMART info on NVME ssd.
verify "show platform ssdhealth" can still work
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Fixed the monit container_checker fails due to unexpected "database-chassis" docker running on Supervisor card in the VOQ chassis. fixes#9042
How I did it
Added database-chassis to the always running docker list if platform is supervisor card.
How to verify it
Execute the CLI command "sudo monit status container_checker"
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
amrhf build fails while building sonic-config-engine whl package
https://dev.azure.com/mssonic/be1b070f-be15-4154-aade-b1d3bfb17054/_apis/build/builds/77089/logs/9
The reason for the failure is due to the fact that there is a new line generated at the top of the file in buffer config test cases while building for broadcom based platform and this issue is not seen in Marvell based platforms.
How I did it
Removed the new line for all the buffer test cases as there is no need to add it and accordingly changed the buffer_config.j2 where the new line is generated.
* Update container_checker for multi-asic devices
Update container_checker for multi-asic devices to add database containers in always_running_containers.
Previous change was made for single-asic, and that database containers were not considered as feature when writing to state_db.
* Update container_checker
Update an indent
This issue causes negative threshold value and thus deleting log files even when there is enough space.
This issue causes negative threshold value and thus deleting log files even when there is enough space.
- Why I did it
To fix an issue when log files get deleted even if there is enough space.
- How I did it
Fixed an typo.
- How to verify it
Run the portion of the script that calculates threshold, see that the threshold is calculated correctly.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Implement infrastructure that allows enabling address sanitizer
for docker containers. Enable address sanitizer for SWSS container.
- Why I did it
To add a possibility to compile SONiC applications with address sanitizer (ASAN).
ASAN is a memory error detector for C/C++. It finds:
1. Use after free (dangling pointer dereference)
2. Heap buffer overflow
3. Stack buffer overflow
4. Global buffer overflow
5. Use after return
6. Use after the scope
7. Initialization order bugs
8. Memory leaks
- How I did it
By adding new ENABLE_ASAN configuration option.
- How to verify it
By default ASAN is disabled and the SONiC image is not affected.
When ASAN is enabled it inspects all allocation, deallocation, and memory usage that the application does in run time. To verify whether the application has memory errors tests that trigger memory usage of the application should be run. Ideally, the whole regression tests should be run. Memory leaks reports will be placed in /var/log/asan/ directory of SONiC host OS.
Signed-off-by: Oleksandr Ivantsiv <oivantsiv@nvidia.com>
Why I did it
Fixes#8980 partly.
The corresponding changes in sonic-sairedis is here :
Azure/sonic-sairedis#975
How I did it
Include changes from both repos and build an image for verification.
How to verify it
Trigger fast-reboot with the changes, see the attribute SAI_SWITCH_ATTR_UNINIT_DATA_PLANE_ON_REMOVAL being set at the SAI level.
Signed-off-by: Thushar Gowda <24815472+tbgowda@users.noreply.github.com>
Why I did it
Requirements from Microsoft for fwutil update all state that all firmwares which support this upgrade flow must support upgrade within a single boot cycle. This conflicted with a number of Mellanox upgrade flows which have been revised to safely meet this requirement.
How I did it
Added --no-power-cycle flags to SSD and ONIE firmware scripts
Modified Platform API to call firmware upgrade flows with this new flag during fwutil update all
Added a script to our reboot plugin to handle installing firmwares in the correct order with prior to reboot
How to verify it
Populate platform_components.json with firmware for CPLD / BIOS / ONIE / SSD
Execute fwutil update all fw --boot cold
CPLD will burn / ONIE and BIOS images will stage / SSD will schedule for reboot
Reboot the switch
SSD will install / CPLD will refresh / switch will power cycle into ONIE
ONIE installer will upgrade ONIE and BIOS / switch will reboot back into SONiC
In SONiC run fwutil show status to check that all firmware upgrades were successful
Why I did it
Eliminate benign firsttime boot error reported when running on platforms that do not support kdump.
How I did it
Change rc.local to check for presence of the file /etc/default/kdump-tools before referencing it.
How to verify it
Install a new image on an armhf or arm64 platform and check for a failed reference to /etc/default/kdump-tools on firsttime boot.
- External PHY is managed via gearbox (gbsybcd docker container) in SONiC
- Enhanced 'External PHY management' from SONiC's single-ASIC environment to multi-ASIC
- Enhanced gbsyncd docker container from single Namespace to multi-Namspace mode
- Added gbsyncd.service.j2 on per_namespace basis.
- Each namepace/ASIC now to have its unique gbsyncd<ASIC#> docker container with its
own Gearbox table, redis-DB
Signed-off-by: Shyam Kumar <shyakuma@cisco.com>
Why I did it
Need to be able to run smartctl when pmon docker is not running.
How I did it
Removed the pmon dependency for pmon as well as the command wrapper and added it to the debian-extension.
How to verify it
Stop pmon
Run smartctl from the host and verify it runs without error
[image]: Prevent radius passkey and snmp community string into syslog. (#9727)
#### Why I did it
Prevent radius passkey and snmp community string into syslog.
#### How I did it
Add radius and snmp config command to PASSWD_CMDS
#### How to verify it
Run and pass all UTs.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
Add radius and snmp config command to PASSWD_CMDS to prevent radius passkey and snmp community string into syslog.
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
The existing log file size in sonic is 1 Mb. Over a period of time this leads to huge number of log files which becomes difficult for monitoring applications to handle.
Instead of large number of small files, the size of the log file is not set to 16 Mb which reduces the number of files over a period of time.
How I did it
Changed the size parameter and related macros in logrotate config for rsyslog
How to verify it
Execute logrotate manually and verify the limit when the file gets rotated.
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
Why I did it
database.sh failed to create the database for namespace in multiasic platform.
The latest code Docker version 20.10.x, command "docker create" no longer takes optional "NET=" with empty value. Syntax error show with current docker create command in database.sh. Issue #9503
How I did it
Modify the docker_image_ctl.j2 to set default network setting NET="bridge" instead of empty for namespace database.
- Use SfpOptoeBase by default to leverage new `sonic_xcvr` refactor
- Add support for `Woodleaf` product
- Move `libsfp-eeprom.so` to a different `.deb` package
- Add new logrotate configuration for arista logs
- Improve logging mechanism for the drivers (IO loglevel, fix syslog duplicates)
- Initialize chassis cards in parallel
- Refactor of `get_change_event` to fix interrupts treated as presence change
