Under certain conditions, the sFlow service can start before
interface configurations are sucessfully applied. This will
cause hsflowd to get a socket error.
This fix ensures all interface configurations are successfully
applied before the sFlow service (hsflowd) starts.
During testing we saw this error from hsflowd if interface configs were not successfully applied before hsflowd started.
ERR sflow#hsflowd: socket sendto error: Network is unreachable
no FLOW samples can be seen. This can be consistently reproducible if you force sFlow service to start before interface-config.service.
Signed-off-by: Garrick He <garrick_he@dell.com>
It fixes the following error during build.
>>> fatal: not a git repository (or any of the parent directories): .git
"SONIC_DPKG_CACHE_METHOD" : "cache"
"DPKG_CACHE_PATH" : "/var/cache/sonic/artifacts"
Changes for supporting vstest for VOQ system ports. The changes include:
(1)Use of chassis_db.json is avoided since the SYSTEM_PORT is made
available in virtual chassis linecard's default_config.json which will
be loaded during bootup
(2)Core port index map file is introduced and is copied from virtual chassis
directory to hwsku direcory by start.sh
(3)vs sai profile is modified to include core port index map file name
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
The issue was a typo introduced in #6006. In that change, the BGP allow list
configuration manager was updated to use a method of common ConfigMgr
for restarting peer groups. However, the method name 'restart_peers' was
used instead of the correct 'restart_peer_groups'.
This change updated the managers_allow_list.py to use correct method
'restart_peer_groups' for restarting peer groups.
Signed-off-by: Xin Wang <xiwang5@microsoft.com>
- Why I did it
'always_enabled' feature can still be disabled/enabled.
- How I did it
When checking if a feature is 'always_enabled', check the cached state to prevent new change to be accepted.
Fix an issue where cache value is updated before all the check is done.
Restore 'always_enabled' value in config db if someone wants to change.
Signed-off-by: Ying Xie ying.xie@microsoft.com
- How to verify it
Without the fix, 'always_enabled' feature can be enabled or disabled without cli protection. With the protection, the change will be rejected properly.
Rename chip name dps1900-i2c-X-58 to pmbus-i2c-X-58 in sensors.conf for Arista 7170 due to latest updates for Arista driver submodules #5686. After these updates adapter dps1900 was renamed and sensors.conf file is not applied properly. Issue was observed started from BFN SONiC image 16.
Signed-off-by: Nazar Tkachuk <nazarx.tkachuk@intel.com>
- Why I did it
For determining reboot-cause while running newer BIOS, SMF firmware.
- How I did it
Made changes in reboot-cause determination script to add support for behavior of newer firmware.
- How to verify it
Performed different type of resets and verified "show reboot-cause" provides the correct reason.
Logs: UT_logs.txt
- Description for the changelog
DellEMC S6100: Update reboot-cause determination to support new firmware
EEPROM cache file is not refreshed after install a new ONIE version even if the eeprom data is updated. The current Eeprom class always try to read from the cache file when the file exists. The PR is aimed to fix it.
- Change return type of SFP methods to match specification in sonic_platform_common/sfp_base.py
- Use init methods of base classes to initialize common instance variables
- Handle negative timeout values in S6100's watchdog ‘arm’ method
- Return appropriate values for 'get_target_speed', 'set_status_led' to avoid false warnings
6fabbedc8ba0f7961bec3ec0adf7bb9d5c71eb2b [consutil][test] Add unit tests for consutil clear command (#1274)
a4f663ea0d7b52eeb76d903b19119c34ab86b1e9 [show/fgnhg] Fix crash bug (#1272)
9f276b21b06423ad11d75fbe17f46a43723f62a5 [config][loopback] Fix Bug that cannot add loopback interface by CLI (#1276)
a5b78cf968e4e5c49b764f5a76bdea6d6532c8d3 [config][show] CLI support for interacting with muxcable (#1221)
8f3b22ed11e166ed24dcd2fb1ac61e227140c2af [connect][sonic-clear] Align the exit code with consutil for line commands (#1256)
cfb7a2269406e8cca354db8a579c401e97f66e9f Feature table cli command update (#1271)
5b8da561b8712e9785622a53a2898671ada9c76e Added Multi-ASIC support for show ip(v6) route (#1216)
a7f39b04eb4b14f56f14f9851d59b81ecd5285f8 Improve MockRedis _encode(): so it will work on all types of value (#1265)
8427caf28ea60af97d8eb1eb3ccb75e99bc54184 [config_mgmt.py]: Remove sort_data call, we do not need it now. (#1246)
9dc58eaa76d38a40f33d534b13442284f598852a [sonic-utilities] Fix show vnet [neighbors | routes [all | tunnel]] crashed issue (#1263)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
- Implement platform module API
- Implement platform drawer API
- Complete and fix a few other platform API
- Add psu and fan support for chassis
- Fix dependency issue with determine-reboot-cause
Made changes so that Lldp docker start using py3 of sonic-db-syncd
submodule update sonic-db-syncd
5cc29a1b32d8d1f4dfbc967bfea2727c50a49c76 (HEAD -> master, origin/master, origin/HEAD) Changes to convert sonic-dbsyncd from python 2 to 3
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Update 50-ttyUSB-C0.rules
Remove some debug codes
* Update popmsg.sh
remove the debug info
* Update udev_prefix.sh
remove debug info
* Update platform-modules-haliburton.postinst
To enable the execute permission of udev scripts
* Update 50-ttyUSB-C0.rules
Fix port 13 - 48 plug out but not pop out message issue.
Signed-off-by: Jing Kan jika@microsoft.com
- Why I did it
Fix issue #6043
- How I did it
We are disabling in container frr log. The log entries are sent to base image and are logged in /var/log/quagga/bgpd.log.
However, we need to remove the whole outchannel config block to avoid an error message raised by rsyslogd.
- How to verify it
Without the change, test_autorestart bgp container will fail on loganalyer errors. With the change, restarting bgp container is no longer generating error message and the test will pass.
The log generated by frr continued appearing in /var/log/quagga/bgpd.log
- Why I did it
Fix the i2c device to address conflicts behind the PCA9548 switch.
- How I did it
Load the i2c-mux-pca954x with parameter force-deselect-on-exit=1.
* [bgpcfgd]: Batch bgp updates.
vtysh -f command is slow. It is sometimes takes about 3 seconds.
When we need to run many vtysh -f commands that slows down the system.
Batch vtysh -f updates.
* Use correct file to import run_command
Submodule updates include the following commits:
* src/sonic-utilities 9dc58ea...f9eb739 (18):
> Remove unnecessary calls to str.encode() now that the package is Python 3; Fix deprecation warning (#1260)
> [generate_dump] Ignoring file/directory not found Errors (#1201)
> Fixed porstat rate and util issues (#1140)
> fix error: interface counters is mismatch after warm-reboot (#1099)
> Remove unnecessary calls to str.decode() now that the package is Python 3 (#1255)
> [acl-loader] Make list sorting compliant with Python 3 (#1257)
> Replace hard-coded fast-reboot with variable. And some typo corrections (#1254)
> [configlet][portconfig] Remove calls to dict.has_key() which is not available in Python 3 (#1247)
> Remove unnecessary conversions to list() and calls to dict.keys() (#1243)
> Clean up LGTM alerts (#1239)
> Add 'requests' as install dependency in setup.py (#1240)
> Convert to Python 3 (#1128)
> Fix mock SonicV2Connector in python3: use decode_responses mode so caller code will be the same as python2 (#1238)
> [tests] Do not trim from PATH if we did not append to it; Clean up/fix shebangs in scripts (#1233)
> Updates to bgp config and show commands with BGP_INTERNAL_NEIGHBOR table (#1224)
> [cli]: NAT show commands newline issue after migrated to Python3 (#1204)
> [doc]: Update Command-Reference.md (#1231)
> Added 'import sys' in feature.py file (#1232)
* src/sonic-py-swsssdk 9d9f0c6...1664be9 (2):
> Fix: no need to decode() after redis client scan, so it will work for both python2 and python3 (#96)
> FieldValueMap `contains`(`in`) will also work when migrated to libswsscommon(C++ with SWIG wrapper) (#94)
- Also fix Python 3-related issues:
- Use integer (floor) division in config_samples.py (sonic-config-engine)
- Replace print statement with print function in eeprom.py plugin for x86_64-kvm_x86_64-r0 platform
- Update all platform plugins to be compatible with both Python 2 and Python 3
- Remove shebangs from plugins files which are not intended to be executable
- Replace tabs with spaces in Python plugin files and fix alignment, because Python 3 is more strict
- Remove trailing whitespace from plugins files
Added new flag value 'always_enabled' for the state and auto-restart field of feature table
init_cfg.json is updated to initialize state field of database/swss/syncd/teamd feature and auto-restart field of database feature
as always_enabled
Once the state/auto-restart value is initialized as "always_enabled" it is immutable and cannot be change via feature config commands. (config feature..) PR#Azure/sonic-utilities#1271
hostcfgd will not take any action if state field value is 'always_enabled'
Since we have always_enabled field for auto-restart updated supervisor-proc-exit-listener
not to have special check for database and always rely on value from Feature table.
In the emulated armhf environment, the function readdir()returns NULL on a ext4 file system directory. When running the libyang test cases, it will require to load the plugins from the files (such as metadata.so), because the readdir() is failing, the plugins can’t be loaded in the emulated armhf environment, so it causes libyang test error. This error is a combination of the following reasons.
• Emulation of a 32-bit target from a 64-bit host –> qemu from x86_64 to armhf
• Glibc version > 2.27 – Debian buster is using glibc 2.28
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
Some syncd containers are still based on Debian Stretch, and thus do not have Python 3 available. For these containers, we must still rely on Python 2 to run supervisord_dependent_startup and supervisor-proc-exit-listener.
* [bash.bashrc] Add reverse SSH script to bash.bashrc
* Fix command issue and add emptt line before EOF
* Add checks for SSH_TARGET_CONSOLE_LINE
Signed-off-by: Jing Kan jika@microsoft.com
- Why I did it
The l2switch.j2 template does not include all fields for PORT. This could be incompatible with the 201911 image or later.
- How I did it
Update l2switch.j2 template and add a unit test.
- Why I did it
Add reboot history to State db so that can be used telemetry service
- How I did it
Split the process-reboot-cause service to determine-reboot-cause and process-reboot-cause
determine-reboot-cause to determine the reboot cause
process-reboot-cause to parse the reboot cause files and put the reboot history to state db
Moved to sonic-host-service* packages
- How to verify it
Performed unit test and tested on DUT
- Why I did it
frr is creating /var/log/frr/frr.log inside the frr docker and letting it grow. It will eventually exhaust hard drive space.
To fixe issue #5965
- How I did it
Remove rsyslog file outchannel so that frr won't generate /var/log/frr/frr.log inside the docker.
- How to verify it
Manually removed the outchannel and restart BGP docker, making sure that /var/log/frr/frr.log is no longer created inside the docker.
While restarting bgp docker, observed that base image /var/log/quagga/bgpd.log continued to grow and captured all FRR logs.
