During the build process, a dsc file is retrieved from the URL:
http://deb.debian.org/debian/pool/main/i/isc-dhcp/isc-dhcp_4.4.1-2.3.dsc
Depending on the DNS resolution, the server reached may respond with a
HTTP 404 error code, what stops the build process.
In all cases, the URL http://deb.debian.org/debian/pool/main/i/isc-dhcp/
no more lists this DSC file but one with a different format.
The suffix "+deb11u1" is now appended to identify the debian version.
- append this suffix to the make file rules of isc-dhcp
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
What I did:
Fix : #13117
How I did:
During build time mask only those feature/services that are disabled explicitly. Some of the features ((eg: teamd/bgp/dhcp-relay/mux/etc..)) state is determine run-time so for those feature by default service will be up and running and then later hostcfgd will mask them if needed.
So Default behavior will be
init_cfg.json.j2 during build time make state as disabled then mask the service
init_cfg.json.j2 during build time make state as another jinja2 template render string than do no mask the service
init_cfg.json.j2 during build time make state as enabled then do not mask the service
How I verify:
Manual Verification.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Undo submodule updates that were incorrectly done in #13056.
Partial revert of d57de09
The following submodule changes are being reverted to the version that were present before the above PR got merged:
src/sonic-linux-kernel to 34f26b35839d7c0c09d48176c4ec33197344643c
src/sonic-frr/frr to 79188bf710e92acf42fb5b9b0a2e9593a5ee9b05
Signed-off-by: Saikrishna Arcot sarcot@microsoft.com
Why I did it
Fix issue caused by dualtor support PR [dhcpmon] Open different socket for dual tor to enable interface filtering #11201
Improve code
How I did it
On single ToR, packets received count was duplicated due to socket filter set to "inbound"
Tx count not increasing due to filter set to "inbound". Added an outbound socket to count tx packets
Added vlan member interface mapping for Ethernet interface to vlan interface lookup in reference to PR Fix multiple vlan issue sonic-dhcp-relay#27
Exit when socket fails to initialize to allow dhcp_relay docker to restart
How to verify it
Tested on vstestbed single tor and dual tor, sent packets and verify printed out dhcpmon rx and tx counters is correct
Correct number of tx increases
Tx does not increase when ToR is on standby
Why I did it
Enable Test sai api on bfn container with a lightweight container(saiserver).
How I did it
enable saiserver container on barefoot platform.
add docker-saiserver-bfn.mk for building saiserver container
in platform/barefoot/docker-saiserver-bfn, add necessary files that needs in saiserver container
How to verify it
Tested on Intel platform ec9516
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
#### Why I did it
Submodule update for sonic-gnmi
Incorporates:
d922a07 Zain Budhwani Wed Jan 4 21:27:32 2023 -0800 Fix gnmi cli hang (sonic-net/sonic-gnmi#69)
#### How I did it
Get latest updates
Update sonic-sairedis submodule pointer to include the following:
402eb14 [ppi]: Enable bulk API. (#1171)
86bb828 Switch to using stock gcovr 5.2 (#1174)
1c9ca78 Manage LANES mapping on VOQ system (#1127)
5887d31 Fix for [EVPN] When MAC moves from remote end point to local, ASIC DB fields are not updated properly for the mac #11503Update NotificationProcessor.cpp (#1118)
559bd5b [ci][asan] add DVS tests run with ASAN (#1139)
4ab46b5 Initialize attr variables in Legacy.switch_get and LegacyFdbEntry.fdb_entry_get (#1169)
4e24c77 The meta_sai_validate_fdb_entry() validates the input FDB entry for the (#1154)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
In some cases, dpkg will call dpkg to validate version.
dpkg hook will get stuck in a loop to lock.
How I did it
Use an env variable to skip duplicated lock.
#### Why I did it
Timestamp formatter inside UT was failing due to new year change
#### How I did it
Use a const stored year that will used as expected value
#### How to verify it
Run UT
./functions.sh script contains twice the command "git describe --tags".
Azure pipelines currently retrieves the repository content by using a
"git clone" or "git fetch" command with the option "--depth".
When the depth is not enough sized to reach a tag in the "git log"
history, "git describe --tags" generates on stderr the warning:
"fatal: No names found, cannot describe anything."
https://stackoverflow.com/questions/4916492/git-describe-fails-with-fatal-no-names-found-cannot-describe-anything
During the build process, the functions.sh script is a lot consumed and
this pointless warning appears in CI thousand lines w/o any added value.
This situation can be easily avoided by redirecting related commands
stderr output to /dev/null.
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
Why I did it
Advance dhcprelay submodule for master
4bf1868 - (HEAD, origin/master, origin/HEAD, master) fix relay-reply dhcpv6 packet counter issue [jcaiMR]
How I did it
How to verify it
Why I did it
In the voq chassis the buffer_queue configuration needs to be applied on system_port instead of the sonic port.
This PR has the change to do this.
How I did it
Modify buffer_config.j2 to generate buffer_queue configuration on system_ports if the device is Voq Chassis
How to verify it
Verify the buffer_queue configuration is generated properly using sonic-cfggen
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
The followup to #12920 PR.
If the feature compilation is disabled its configuration should not be included into init_cfg.json.
- How I did it
Update init_cfg.json.j2 template to include teamd and radv features configuration only if their compilation is enabled.
- How to verify it
The default behavior is preserved. To verify the changes compile the image without overriding INCLUDE_TEAMD and INCLUDE_ROUTER_ADVERTISER options. The generated /etc/sonic/init_cfg.json should remain with no changes. Install the image and verify that both teamd and radv containers are present and running. Verify that feature state returned by show feature status command is enabled.
Change the INCLUDE_TEAMD or INCLUDE_ROUTER_ADVERTISER value to "n". Compile and install the image. Verify that feature configuration is not included in generated /etc/sonic/init_cfg.json file. Verify that show feature status output doesn't include the feature.
Why I did it
Currently sonic-slave-* tag is confusing. Set correct tag on sonic-slave-* image.
Fix job name to fit the build.
How I did it
build amd image in amd64:
sonic-slave-bullseye:cfe29bff67c
sonic-slave-bullseye:latest
sonic-slave-bullseye:master
build armhf image in amd64:
sonic-slave-bullseye-march-armhf:33614806dc3
sonic-slave-bullseye-march-armhf:latest
sonic-slave-bullseye-march-armhf:master
build arm64 image in amd64:
sonic-slave-bullseye-march-arm64:f3b1b16c801
sonic-slave-bullseye-march-arm64:latest
sonic-slave-bullseye-march-arm64:master
build arm64 image in arm64:
sonic-slave-bullseye:75cb326c9a7
sonic-slave-bullseye-arm64:latest
sonic-slave-bullseye:master
build armhf image in armhf:
sonic-slave-bullseye:64d178951fc
sonic-slave-bullseye-armhf:latest
sonic-slave-bullseye:master
How to verify it
- Why I did it
Remove dependency on interfaces-config.service to speed up boot, because interfaces-config.service takes a lot of time on boot.
- How I did it
Changed service files for swss, syncd.
- How to verify it
Boot and check swss/syncd start time comparing to interfaces-config
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Avoid traceback on sonic-clear command
sonic-clear dhcp6relay_counters
Traceback (most recent call last):
File "/usr/local/bin/sonic-clear", line 8, in <module>
sys.exit(cli())
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 764, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 717, in main
rv = self.invoke(ctx)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 1137, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 956, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 555, in invoke
return callback(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/clear/plugins/dhcp-relay.py", line 19, in dhcp6relay_clear_counters
counter = DHCPv6_Counter()
NameError: name 'DHCPv6_Counter' is not defined
- How I did it
Corrected the way to import using importlib
- How to verify it
Tested the sonic-clear command and verified no traceback is seen
Why I did it
tag sonic-slave-* image with branch.
Only keep sonic-slave-* latest tag when it is master branch and amd64 arch.
How I did it
How to verify it
Updating sonic-swss to latest to include following fixes -
0d91125 [bufferorch] : Support for buffer profiles for VoQ on chassis (#2465)
94429f1 Fixed a bug causing error state of same configuration is applied twice. (#2580)
f1c0a75 Update FDB state table when , MAC entries are modified as dynamic_local. (#2575)
beaac71 [voq][chassis]Add show fabric counters port/queue commands (#2522)
44d1e9c Fix test_vlan.py (#2541)
c00455a Only collect stdout of orchagent_restart_check in vstest (#2578)
def98d9 Remove TODO comments which are no longer needed (#2568)
- Why I did it
Support syslog rate limit configuration feature
- How I did it
Remove unused rsyslog.conf from containers
Modify docker startup script to generate rsyslog.conf from template files
Add metadata/init data for syslog rate limit configuration
- How to verify it
Manual test
New sonic-mgmt regression cases
Why I did it
To keep 'Request for xxx branch' label when finished auto-cherry-pick.
How I did it
Change logic in post cherry pick action.
How to verify it
Why I did it
In PR check pipelines, there are too many duplicated warnings:
fatal: No names found, cannot describe anything.
SONIC_IMAGE_VERSION will not change in one build. We don't need to calculate in every reference. We just need calculate one time, then record it.
In Makefile, '=' will calculate again and again when it is referred.
How I did it
Fix it in Makefile.
How to verify it
Check this PR's check pipeline result.
- Why I did it
In order to prevent the sonic-mgmt/tests/platform_tests/sfp/test_sfputil.py test failing on the log analyzer step.
The mentioned test is performing the sfputil reset EthernetX for every interface on the SONiC switch, this action will flap the SFP device status (INSTERTED -> REMOVED -> INSTERTED).
The SONiC XCVRD daemon will catch this SFP device status change (because it is monitoring the presence status of the cable).
To judge the cable presence status, currently, we are still leveraging to read the first bytes of the EEPROM, and the EEPROM could be not ready at some moment and the SONiC XCVRD daemon will print the error log to Syslog:
ERR pmon#xcvrd: Error! Unable to read data for 'xx' port, page 'xx' offset 128, rc = 1, err msg: Sending access register
- How I did it
Change logging severity from ERR to WARNING
- How to verify it
Run the sonic-mgmt/tests/platform_tests/sfp/test_sfputil.py
OR much faster way to run the next script on the switch:
#!/bin/bash
START=0
END=248
for (( intf=$START; intf<=$END; intf+=8))
do
sfputil reset Ethernet"${intf}"
done
sfputil show presence
- Why I did it
Following code to judge whether a process is running inside a docker could get stuck on the simx platform
subprocess.Popen(["docker", "--version"],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
universal_newlines=True)
When it gets stuck, the config-chassisdb service can not be successfully started, thus the system can not be booted up.
root@sonic:/# service config-chassisdb status
config-chassisdb.service - Config chassis_db
Loaded: loaded (/lib/systemd/system/config-chassisdb.service; enabled; vendor preset: enabled)
Active: activating (start) since Thu 2022-12-15 09:23:02 UTC; 29min ago
Main PID: 571 (config-chassisd)
Tasks: 14 (limit: 9501)
Memory: 132.4M
CGroup: /system.slice/config-chassisdb.service
├─571 /bin/bash /usr/bin/config-chassisdb
├─575 /usr/bin/python3 /usr/local/bin/sonic-cfggen -H -v DEVICE_METADATA.localhost.platform
├─602 /bin/sh -c sudo decode-syseeprom -m
├─603 sudo decode-syseeprom -m
├─607 /usr/bin/python3 /usr/local/bin/decode-syseeprom -m
├─616 /bin/sh -c docker --version 2>/dev/null
└─617 docker --version
- How I did it
Use an alternative way to implement this function and issue can be avoided:
docker_env_file = '/.dockerenv'
return os.path.exists(docker_env_file) is False
- How to verify it
run regression on real hardware and simx platform.
Why I did it
Makefile needs some dependencies from the Internet. It will fail for network related issue.
Retries will fix most of these issues.
How I did it
Add retries when running commands which maybe related with networking.
How to verify it
Why I did it
Add two platform that support s3IP framework
How I did it
Add two platforms supporting S3IP SYSFS (TCS8400, TCS9400)
How to verify it
Manual test
Adding platform support for FS s5800-48t4s and s5800-48t8s-mars8p.
Both s5800-48t4s and s5800-48t8s-mars8p have 48 * 10/100/1000 Base-T ports, 4 * 10GE SFP+ Ports on Centec TsingMa.
s5800-48t4s is different from s5800-48t8s-mars8p in that:
The phy chip used by s5800-48t4s is Marvell 88e1680;
The phy chip used by s5800-48t4s-mars8p is Centec ctc21108;
Why I did it
Fixes#12634
Observing the following error while running 'sfputil show lpmode' command.
AttributeError: 'Sfp' object has no attribute 'get_power_set'
Root Cause: get_power_set() is defined for QSFP28 and QSFP+ i.e. Sff8636 and Sff8634. However, the function is not defined in the optoe_base class.
How I did it
To use get_power_set(), we need to initialise the 'api' via get_xcvr_api() and then use it to run get_power_set().
Why I did it
make clean is broken after #12000:
bash: -c: line 1: syntax error near unexpected token `;'
bash: -c: line 1: `make -f slave.mk PLATFORM= PLATFORM_ARCH=amd64 MULTIARCH_QEMU_ENVIRON=n
...
MIRROR_URLS= MIRROR_SECURITY_URLS= Q=@ clean; ; '
make[1]: *** [Makefile.work:531: clean] Error 2
How I did it
Remove a conditional for clean command.
Signed-off-by: Konstantin Vasin <k.vasin@yadro.com>
Why I did it
It's possible to speed up some parts of a build using parallel compression/decompression.
This is especially important for build_debian.sh.
How I did it
pigz is a parallel implementation of gzip: https://zlib.net/pigz/
Some programs like docker and mkinitramfs can automatically detect and use it instead of gzip.
For tar we need to select it directly.
To enable this feature you need to set GZ_COMPRESS_PROGRAM=pigz
