Why I did it
[Build] Support to use the snapshot mirror for debian base image
How I did it
If the MIRROR_SNAPSHOT=n, then use the default mirror http://deb.debian.org/debian
If the MIRROR_SNAPSHOT=y, then use the snapshot mirror, for instance http://packages.trafficmanager.net/snapshot/debian/20230330T000330Z/.
How to verify it
+ scripts/build_debian_base_system.sh amd64 bullseye ./fsroot-vs
I: Target architecture can be executed
I: Retrieving InRelease
I: Checking Release signature
I: Valid Release signature (key id A4285295FC7B1A81600062A9605C66F00D6C9793)
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Checking component main on http://packages.trafficmanager.net/snapshot/debian/20230331T000125Z...
I: Retrieving libacl1 2.2.53-10
- Why I did it
Add Secure Boot support to SONiC OS.
Secure Boot (SB) is a verification mechanism for ensuring that code launched by a computer's UEFI firmware is trusted. It is designed to protect a system against malicious code being loaded and executed early in the boot process before the operating system has been loaded.
- How I did it
Added a signing process to sign the following components:
shim, grub, Linux kernel, and kernel modules when doing the build, and when feature is enabled in build time according to the HLD explanations (the feature is disabled by default).
- How to verify it
There are self-verifications of each boot component when building the image, in addition, there is an existing end-to-end test in sonic-mgmt repo that checks that the boot succeeds when loading a secure system (details below).
How to build a sonic image with secure boot feature: (more description in HLD)
Required to use the following build flags from rules/config:
SECURE_UPGRADE_MODE="dev"
SECURE_UPGRADE_DEV_SIGNING_KEY="/path/to/private/key.pem"
SECURE_UPGRADE_DEV_SIGNING_CERT="/path/to/cert/key.pem"
After setting those flags should build the sonic-buildimage.
Before installing the image, should prepared the setup (switch device) with the follow:
check that the device support UEFI
stored pub keys in UEFI DB
enabled Secure Boot flag in UEFI
How to run a test that verify the Secure Boot flow:
The existing test "test_upgrade_path" under "sonic-mgmt/tests/upgrade_path/test_upgrade_path", is enough to validate proper boot
You need to specify the following arguments:
Base_image_list your_secure_image
Taget_image_list your_second_secure_image
Upgrade_type cold
And run the test, basically the test will install the base image given in the parameter and then upgrade to target image by doing cold reboot and validates all the services are up and working correctly
- Why I did it
The flow of SONiC reproducible build assumes that web packages (retrieved by curl and wget) are located in a single web file.
server. Currently there is no way to easily download the packages from the various file servers where they are currently deployed.
In this change we offer a utility to download all relevant packages and upload them to a specific file server.
- How I did it
We implemented python script that parse the various version files (generated by SONIC reproducible build compilation) and identify all relevant packages.
Later the script downloads the file and then upload them to the destination server pointed by the user.
- How to verify it
Script is running and was verified manually
Which release branch to backport (provide reason below if selected)
Feature will be added to master only
Signed-off-by: oreiss <oren.reiss@gmail.com>
Why I did it
Change the mirror config file
Use the files/build/versions/default/versions-mirror only when reproducible build enabled.
The config in files/build/versions is only for reproducible build, while snapshot mirror feature does not have the dependency on the reproducible build.
How I did it
Skip the mirror config in files/build/versions/default/versions-mirror if reproducible build not enabled.
How to verify it
issue #13395
Fix a bug about sudo failure.
/usr/local/share/buildinfo/scripts/buildinfo_base.sh: line 24: sudo: command not found
Fix an issue about warning message.
./scripts/run_with_retry: line 4: [: : integer expression expected
Why I did it
[Build] Support Debian snapshot mirror to improve build stability
It is to enhance the reproducible build, supports the Debian snapshot mirror. It guarantees all the docker images using the same Debian mirror snapshot and fixes the temporary build failure which is caused by remote Debain mirror indexes changed during the build. It is also to fix the version conflict issue caused by no fixed versions of some of the Debian packages.
How I did it
Add a new feature to support the Debian snapshot mirror.
How to verify it
Why I did it
Makefile needs some dependencies from the Internet. It will fail for network related issue.
Retries will fix most of these issues.
How I did it
Add retries when running commands which maybe related with networking.
How to verify it
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Why I did it
How I did it
How to verify it
* 03.Version-cache - framework environment settings
It defines and passes the necessary version cache environment variables
to the caching framework.
It adds the utils script for shared cache file access.
It also adds the post-cleanup logic for cleaning the unwanted files from
the docker/image after the version cache creation.
* 04.Version cache - debug framework
Added DBGOPT Make variable to enable the cache framework
scripts in trace mode. This option takes the part name of the script to
enable the particular shell script in trace mode.
Multiple shell script names can also be given.
Eg: make DBGOPT="image|docker"
Added verbose mode to dump the version merge details during
build/dry-run mode.
Eg: scripts/versions_manager.py freeze -v \
'dryrun|cmod=docker-swss|cfile=versions-deb|cname=all|stage=sub|stage=add'
* 05.Version cache - docker dpkg caching support
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Why I did it
arm64 bullseye docker image source is set to jessie for VERSION_CODENAME is miss.
shil@localhost:~/sonic-buildimage$ docker run -it multiarch/debian-debootstrap:arm64-bullseye bash
root@b2e2fea86e2d:/# cat /etc/os-release | grep VERSION_CODENAME | cut -d= -f2
root@b2e2fea86e2d:/# cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux bullseye/sid"
NAME="Debian GNU/Linux"
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
How I did it
if DISTRO is NULL, find it in /etc/apt/sources.list
root@b2e2fea86e2d:/# cat /etc/apt/sources.list | grep deb.debian.org | awk '{print $3}'
bullseye
root@b2e2fea86e2d:/# cat /etc/apt/sources.list
deb http://deb.debian.org/debian bullseye main
root@b2e2fea86e2d:/#
During docker build, host files can be passed to the docker build through
docker context files. But there is no straightforward way to transfer
the files from docker build to host.
This feature provides a tricky way to pass the cache contents from docker
build to host. It tar's the cached content and encodes them as base64 format
and passes it through a log file with a special tag as 'VCSTART and VCENT'.
Slave.mk in the host, it extracts the cache contents from the log and stores them
in the cache folder. Cache contents are encoded as base64 format for
easy passing.
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
#### How I did it
#### How to verify it
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required.
Support to customize the Debian mirror sources during the build
Relative issue: #12523
Why I did it
Fix the build unstable issue caused by the kvm 9000 port is not ready to use in 2 seconds.
2022-09-02T10:57:30.8122304Z + /usr/bin/kvm -m 8192 -name onie -boot order=cd,once=d -cdrom target/files/bullseye/onie-recovery-x86_64-kvm_x86_64_4_asic-r0.iso -device e1000,netdev=onienet -netdev user,id=onienet,hostfwd=:0.0.0.0:3041-:22 -vnc 0.0.0.0:0 -vga std -drive file=target/sonic-6asic-vs.img,media=disk,if=virtio,index=0 -drive file=./sonic-installer.img,if=virtio,index=1 -serial telnet:127.0.0.1:9000,server
2022-09-02T10:57:30.8123378Z + sleep 2.0
2022-09-02T10:57:30.8123889Z + '[' -d /proc/284923 ']'
2022-09-02T10:57:30.8124528Z + echo 'to kill kvm: sudo kill 284923'
2022-09-02T10:57:30.8124994Z to kill kvm: sudo kill 284923
2022-09-02T10:57:30.8125362Z + ./install_sonic.py
2022-09-02T10:57:30.8125720Z Trying 127.0.0.1...
2022-09-02T10:57:30.8126041Z telnet: Unable to connect to remote host: Connection refused
How I did it
Waiting more time until the tcp port 9000 is ready, waiting for 60 seconds in maximum.
#### Why I did it
Fix the build failure caused by the installer image size too small. The installer image is only used during the build, not impact the final images.
See https://dev.azure.com/mssonic/build/_build/results?buildId=139926&view=logs&j=cef3d8a9-152e-5193-620b-567dc18af272&t=359769c4-8b5e-5976-a793-85da132e0a6f
```
+ fallocate -l 2048M ./sonic-installer.img
+ mkfs.vfat ./sonic-installer.img
mkfs.fat 4.2 (2021-01-31)
++ mktemp -d
+ tmpdir=/tmp/tmp.TqdDSc00Cn
+ mount -o loop ./sonic-installer.img /tmp/tmp.TqdDSc00Cn
+ cp target/sonic-vs.bin /tmp/tmp.TqdDSc00Cn/onie-installer.bin
cp: error writing '/tmp/tmp.TqdDSc00Cn/onie-installer.bin': No space left on device
[ FAIL LOG END ] [ target/sonic-vs.img.gz ]
```
#### How I did it
Increase the size from 2048M to 4096M.
Why not increase to 16G like qcow2 image?
The qcow2 supports the sparse disk, although a big disk size allocated, but it will not consume the real disk size. The falocate does not support the sparse disk. We do not want to allocate a very big disk, but no use at all. It will require more space to build.
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
Why I did it
Fix host image debian package version issue.
The package dependencies may have issue, when some of debian packages of the base image are upgraded. For example, libc is installed in base image, but if the mirror has new version, when running "apt-get upgrade", the package will be upgraded unexpected. To avoid such issue, need to add the versions when building the host image.
How I did it
The package versions of host-image should contain host-base-image.
#### Why I did it
Info: Attempting file://dev/vdb/onie-installer ...
Info: Attempting file://dev/vdb/onie-installer.bin ...
cp: write error: No space left on device
Failure: local_fs_run():/dev/vdb Unable to copy /tmp/tmp.CPY0ad/onie-installer.bin to tmpfs
vs image is failing. Increase kvm device space.
When the package name with special characters, such as +, the package name may be encoded as %2b, the package url will not be found when reproducible build enabled.
* Remove the rw folder from the image after installing in KVM
When the image is installed from within KVM and then loaded, some files
(such as timer stamp files) are created as part of that bootup that then
get into the final image. This can cause some side effects, such as
systemd thinking that some persistent timers need to run because the
last trigger time got missed.
Therefore, at the end of the check_install.py script, remove the rw
folder so that it doesn't exist in the image, and that when this image
is started up in a KVM setup for the first time, it starts with a truly
clean slate.
Without this change, the issue seen was that for fstrim.timer, a stamp
file would be present in /var/lib/systemd/timers (and for other timers
that are marked as persistent). This would then cause fstrim.service to
get started immediately when starting a QEMU setup if the timer for that
service missed a trigger, and not wait 10 minutes after bootup. In the
case of fstrim.timer, that means if the image was started in QEMU after
next Monday, since that timer is scheduled to be triggered weekly.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Split installation of SONiC and test bootup into two separate scripts
Just removing the rw directory causes other issues, since the first boot
tasks no longer run since that file isn't present. Also, just recreating
that file doesn't completely help, because there are some files that are
moved from the /host folder into the base filesystem layer, and so are
no longer available.
Instead, split the installation of SONiC and doing the test bootup into
two separate scripts and two separate KVM instances. The first KVM
instance is the one currently being run, while the second one has the
`-snapshot` flag added in, which means any changes to the disk image
don't take effect.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Fix no space left on device issue in tmpfs.
2021-12-01T06:30:40.1651742Z cp: write error: No space left on device
2021-12-01T06:30:40.1652225Z Failure: local_fs_run():/dev/vdb Unable to copy /tmp/tmp.gl4Sgp/onie-installer.bin to tmpfs
Why I did it
Fix some of the version files not used issue.
One of example version file version-py3-all-armhf, when building marvell-armhf, the version is used as expected, but it not use.
1. Fix build for armhf and arm64
2. upgrade centec tsingma bsp support to 5.10 kernel
3. modify centec platform driver for linux 5.10
Co-authored-by: Shi Lei <shil@centecnetworks.com>
Build failed on a Ubuntu 20.04 system with kvm kernel, which does not have the /proc/sys/vm/compact_memory
Should check if compact_memory is writeable before doing it.
Signed-off-by: Chris Ward <tjcw@uk.ibm.com>
Why I did it
Multiple build failed in 202012 branch
It is caused by the disorder of the package urls retrieved from the command "apt-get download --print-urls "
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
This PR is part of SONiC Application Extension
Depends on #5938
- Why I did it
To provide an infrastructure change in order to support SONiC Application Extension feature.
- How I did it
Label every installable SONiC Docker with a minimal required manifest and auto-generate packages.json file based on
installed SONiC images.
- How to verify it
Build an image, execute the following command:
admin@sonic:~$ docker inspect docker-snmp:1.0.0 | jq '.[0].Config.Labels["com.azure.sonic.manifest"]' -r | jq
Cat /var/lib/sonic-package-manager/packages.json file to verify all dockers are listed there.
- Support compile sonic arm image on arm server. If arm image compiling is executed on arm server instead of using qemu mode on x86 server, compile time can be saved significantly.
- Add kernel argument systemd.unified_cgroup_hierarchy=0 for upgrade systemd to version 247, according to #7228
- rename multiarch docker to sonic-slave-${distro}-march-${arch}
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
Co-authored-by: Shi Lei <shil@centecnetworks.com>
py2/py3/deb packages names are case insensitive, and the versions map
key should be the same for packages whose name can have different cases.
For example, in files/build/versions/default/versions-py3, package
"click==7.1.2" is pinned; and in
files/build/versions/dockers/docker-sonic-vs/versions-py3, package
"Click==7.0" is pinned.
Without this fix, the aggregated versions-py3 file used for building
docker-sonic-vs looks like below:
...
click==7.1.2
Click==7.0
...
However, we actually want "click==7.0" to overwrite "click==7.1.2" for
docker-sonic-vs build.
