To address issue #5525
Explicitly control the grub installation requirement when it is needed.
We have scenario where configuration migration happened but grub
installation is not required.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
implements a new feature: "BGP Allow list."
This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
implements a new feature: "BGP Allow list."
This feature allows us to control which IP prefixes are going to be advertised via ebgp from the routes received from EBGP neighbors.
* [Multi-Asic] Forward SNMP requests destined to loopback IP, and coming in through the front panel interface
present in the network namespace, to SNMP agent running in the linux host.
* Updates based on comments
* Further updates in docker_image_ctl.j2 and caclmgrd
* Change the variable for net config file.
* Updated the comments in the code.
* No need to clean up the exising NAT rules if present, which could be created by some other process.
* Delete our rule first and add it back, to take care of caclmgrd restart.
Another benefit is that we delete only our rules, rather than earlier approach of "iptables -F" which cleans up all rules.
* Keeping the original logic to clean the NAT entries, to revist when NAT feature added in namespace.
* Missing updates to log_info call.
* buildimage: Add gearbox phy device files and a new physyncd docker to support VS gearbox phy feature
* scripts and configuration needed to support a second syncd docker (physyncd)
* physyncd supports gearbox device and phy SAI APIs and runs multiple instances of syncd, one per phy in the device
* support for VS target (sonic-sairedis vslib has been extended to support a virtual BCM81724 gearbox PHY).
HLD is located at b817a12fd8/doc/gearbox/gearbox_mgr_design.md
**- Why I did it**
This work is part of the gearbox phy joint effort between Microsoft and Broadcom, and is based
on multi-switch support in sonic-sairedis.
**- How I did it**
Overall feature was implemented across several projects. The collective pull requests (some in late stages of review at this point):
https://github.com/Azure/sonic-utilities/pull/931 - CLI (merged)
https://github.com/Azure/sonic-swss-common/pull/347 - Minor changes (merged)
https://github.com/Azure/sonic-swss/pull/1321 - gearsyncd, config parsers, changes to orchargent to create gearbox phy on supported systems
https://github.com/Azure/sonic-sairedis/pull/624 - physyncd, virtual BCM81724 gearbox phy added to vslib
**- How to verify it**
In a vslib build:
root@sonic:/home/admin# show gearbox interfaces status
PHY Id Interface MAC Lanes MAC Lane Speed PHY Lanes PHY Lane Speed Line Lanes Line Lane Speed Oper Admin
-------- ----------- --------------- ---------------- --------------- ---------------- ------------ ----------------- ------ -------
1 Ethernet48 121,122,123,124 25G 200,201,202,203 25G 204,205 50G down down
1 Ethernet49 125,126,127,128 25G 206,207,208,209 25G 210,211 50G down down
1 Ethernet50 69,70,71,72 25G 212,213,214,215 25G 216 100G down down
In addition, docker ps | grep phy should show a physyncd docker running.
Signed-off-by: syd.logan@broadcom.com
redis-py 3.0 used in master branch only accepts user data as bytes,
strings or numbers (ints, longs and floats). Attempting to specify a key
or a value as any other type will raise a DataError exception.
This PR address the issue bt converting datetime to str
We want to let Monit to unmonitor the processes in containers which are disabled in `FEATURE` table such that
Monit will not generate false alerting messages into the syslog.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
buffer_default_*.j2 because of which internal cable length never gets
define and cause failure in test case test_multinpu_cfggen.py
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Enhanced Feature Table state enable/disbale for multi-asic platforms.
In Multi-asic for some features we can service per asic so we need to
get list of all services.
Also updated logic to return if any one of systemctl command return failure
and make sure syslog of feature getting enable/disable only come when
all commads are sucessful.
Moved the service list get api from sonic-util to sonic-py-common
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Make sure to retun None for both service list in case of error.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Return empty list as fail condition
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Address Review Comments.
Made init_cfg.json.j2 knowledegable of Feature
service is global scope or per asic scope
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
* Fix merge conflict
* Address Review Comment.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
for ipv6 communication between container and host in multi-asic
platforms. Address is assign is private address space of fd::/80
with prefix len selected as 80 so that last 48 bits can be
container mac address and and you prevent NDP neighbor cache
invalidation issues in the Docker layer.
Ref: https://docs.docker.com/config/daemon/ipv6/
Ref:https://medium.com/@skleeschulte/how-to-enable-ipv6-for-docker-containers-on-ubuntu-18-04-c68394a219a2
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
To fix the following error when running
`logrotate /etc/logrotate.conf` :
```
error: dpkg:10 duplicate log entry for /var/log/alternatives.log
error: found error in file dpkg, skipping
```
update-alternatives is provided with dedicated logrotate config in newer dpkg package versions (probably starting from buster)
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
We are moving toward building all Python packages for SONiC as wheel packages rather than Debian packages. This will also allow us to more easily transition to Python 3.
Python files are now packaged in "sonic-utilities" Pyhton wheel. Data files are now packaged in "sonic-utilities-data" Debian package.
**- How I did it**
- Build and install sonic-utilities as a Python package
- Remove explicit installation of wheel dependencies, as these will now get installed implicitly by pip when installing sonic-utilities as a wheel
- Build and install new sonic-utilities-data package to install data files required by sonic-utilities applications
- Update all references to sonic-utilities scripts/entrypoints to either reference the new /usr/local/bin/ location or remove absolute path entirely where applicable
Submodule updates:
* src/sonic-utilities aa27dd9...2244d7b (5):
> Support building sonic-utilities as a Python wheel package instead of a Debian package (#1122)
> [consutil] Display remote device name in show command (#1120)
> [vrf] fix check state_db error when vrf moving (#1119)
> [consutil] Fix issue where the ConfigDBConnector's reference is missing (#1117)
> Update to make config load/reload backward compatible. (#1115)
* src/sonic-ztp dd025bc...911d622 (1):
> Update paths to reflect new sonic-utilities install location, /usr/local/bin/ (#19)
This PR limited the number of calls to sonic-cfggen to one call
per iteration instead of current 3 calls per iteration.
The PR also installs jq on host for future scripts if needed.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
communication on docker eth0 ip . Without this TCP Connection to Redis
does not happen in namespace.
Signed-off-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Co-authored-by: Abhishek Dosi <abdosi@abdosi-ubuntu-vm0.nwp1qucpfg5ejooejenqshkj3e.cx.internal.cloudapp.net>
Introduced a new build parameter 'SONIC_IMAGE_VERSION' that allows build
system users to build SONiC image with a specific version string. If
'SONIC_IMAGE_VERSION' was not passed by the user, SONIC_IMAGE_VERSION will be
set to the output of functions.sh:sonic_get_version function.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
As per the VOQ HLDs, internal networking between the linecards and supervisor is required within a chassis.
Allocating 127.X/16 subnets for private communication within a chassis is a good candidate.
It doesn't require any external IP allocation as well as ensure that the traffic will not leave the chassis.
References:
https://github.com/Azure/SONiC/pull/622https://github.com/Azure/SONiC/pull/639
**- How I did it**
Changed the `interfaces.j2` file to add `127.0.0.1/16` as the `lo` ip address.
Then once the interface is up, the post-up command removes the `127.0.0.1/8` ip address.
The order in which the netmask change is made matters for `127.0.0.1` to be reachable at all times.
**- How to verify it**
```
root@sonic:~# ip address show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/16 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
```
Co-authored-by: Baptiste Covolato <baptiste@arista.com>
- Merge chassis codebase upstream
- Add support for Otterlake supervisor
- Add support for NorthFace and Camp chassis
- Add support for Eldridge, Dragonfly and Brooks fabrics
- Add support for Clearwater2 and Clearwater2Ms linecards
- Add new arista Cli to power on/off cards
- Add new arista show Cli to inspect supervisor, chassis, fabrics and linecards
Issue: Binary ebtables config file is CPU arch dependent
Fix: Load the text config during firsttime boot and
Generate the binary persistent atomic file
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
sonic-cfggen is now using Unix Domain Socket for Redis DB. The socket
is created using root account. Subsequently, services that are started
as admin fails to start. This PR creates redis group and add admin
user to redis group. It also grants read/write access on redis.sock
for redis group members.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
[schema] Make schema header support C project (#373)
Removed DB specific get api's from Selectable class (#378)
With the change as part of #378 caclmgrd need to be updated
to use new client side Get API to access namespace.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
The pcie-check.sh script was added in https://github.com/Azure/sonic-buildimage/pull/4771, but was not given executable permission. Therefore, we would see messages like:
```
Aug 26 22:54:05.536248 sonic ERR systemd[664]: pcie-check.service: Failed to execute command: Permission denied
Aug 26 22:54:05.536386 sonic ERR systemd[664]: pcie-check.service: Failed at step EXEC spawning /usr/bin/pcie-check.sh: Permission denied
Aug 26 22:54:05.536600 sonic WARNING systemd[1]: pcie-check.service: Failed with result 'exit-code'.
```
management framework provides management plane services like rest and
CLI which is not needed right after boot, instead by delaying this
service we give some more CPU for data plane and control plane services
on fast/warm boot.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
New attribute 'has_timer' introduced to init_cfg.json does not evaluate
as Bool, rather it evaluates as string. This PR fixes this issue. Also,
this PR fixes an issue when there is system config unit (snmp, telemetry) that
has no installation config (WantedBy=, RequiredBy=, Also=, Alias=) settings
in the [Install] section. In the latter case, the .service should not be enabled.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Add a master switch so that the sync/async mode can be configured.
Example usage of the switch:
1. Configure mode while building an image
`make ENABLE_SYNCHRONOUS_MODE=y <target>`
2. Configure when the device is running
Change CONFIG_DB with `sonic-cfggen -a '{"DEVICE_METADATA":{"localhost": {"synchronous_mode": "enable"}}}' --write-to-db`
Restart swss with `systemctl restart swss`
The first partition starting point was changed to be 1M as part of this
commit: 6ba2f97f1e. On systems that are misaligned before conversion
(partition start is the first sector), the relica partition that is
left in the first MB can cause problems in Aboot and result in corruption
of the filesystem on the new aligned partition.
Zeroing this old relica makes sure that there is nothing left of the old
partition lying around. There won't be any risk of having Aboot corrupt
the new filesystem because of the old relica.
Signed-off-by: Baptiste Covolato <baptiste@arista.com>
- Why I did it
When SONiC is configured with the management framework and/or telemetry services, the applications running inside those containers need to access some functionality on the host system. The following is a non-exhaustive list of such functionality:
Image management
Configuration save and load
ZTP enable/disable and status
Show tech support
- How I did it
The host service is a Python process that listens for requests via D-Bus. It will then service those requests and send a response back to the requestor.
This PR only introduces the host service infrastructure. Applications that need access to the host services must add applets that will register on D-Bus endpoints to service the appropriate functionality.
- How to verify it
- Description for the changelog
Add SONiC Host Service for container to execute select commands in host
Signed-off-by: Nirenjan Krishnan <Nirenjan.Krishnan@dell.com>
Commit e484ae9dd introduced systemd .timer unit to hostcfgd.
However, when stopping service that has timer, there is possibility that
timer is not running and the service would not be stopped. This PR
address this situation by handling both .timer and .service units.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
startup when doing redis PING since database_config.json getting
generated from jinja2 template is still not ready.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Support for Control Plane ACL's for Multi-asic Platforms.
Following changes were done:
1) Moved from using blocking listen() on Config DB to the select() model
via python-swsscommon since we have to wait on event from multiple
config db's
2) Since python-swsscommon is not available on host added libswsscommon and python-swsscommon
and dependent packages in the base image (host enviroment)
3) Made iptables programmed in all namespace using ip netns exec
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Fix Comments
* Added Change for Multi-asic to have iptables
rules to accept internal docker tcp/udp traffic
needed for syslog and redis-tcp connection.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix Review Comments
* Added more comments on logic.
* Fixed all warning/errors reported by http://pep8online.com/
other than line > 80 characters.
* Fix Comment
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Verified with swsscommon package. Fix issue for single asic platforms.
* Moved to new python package
* Address Review Comments.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments.
SNMP and Telemetry services are not critical to switch startup.
They also cause fast-reboot not to meet timing requirements.
In order to delay start those service are associated with systemd
timer units, however when hostcfgd initiate service start, it start
the service and not the timer. This PR fixes this issue by
starting the timer associated with systemd unit.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Calls to sonic-cfggen is CPU expensive. This PR reduces calls to
sonic-cfggen to one call during startup when running interfaces-
config.
singed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Removes installation of kube-proxy (117 MB) and flannel (53 MB) images from Kubernetes-enabled devices. These images are tested to be unnecessary for our use case, as we do not rely on ClusterIPs for Kubernetes Services or a CNI for pod networking.
1. remove container feature table
2. do not generate feature entry if the feature is not included
in the image
3. rename ENABLE_* to INCLUDE_* for better clarity
4. rename feature status to feature state
5. [submodule]: update sonic-utilities
* 9700e45 2020-08-03 | [show/config]: combine feature and container feature cli (#1015) (HEAD, origin/master, origin/HEAD) [lguohan]
* c9d3550 2020-08-03 | [tests]: fix drops_group_test failure on second run (#1023) [lguohan]
* dfaae69 2020-08-03 | [lldpshow]: Fix input device is not a TTY error (#1016) [Arun Saravanan Balachandran]
* 216688e 2020-08-02 | [tests]: rename sonic-utilitie-tests to tests (#1022) [lguohan]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
As part of consolidating all common Python-based functionality into the new sonic-py-common package, this pull request:
1. Redirects all Python applications/scripts in sonic-buildimage repo which previously imported sonic_device_util or sonic_daemon_base to instead import sonic-py-common, which was added in https://github.com/Azure/sonic-buildimage/pull/5003
2. Replaces all calls to `sonic_device_util.get_platform_info()` to instead call `sonic_py_common.get_platform()` and removes any calls to `sonic_device_util.get_machine_info()` which are no longer necessary (i.e., those which were only used to pass the results to `sonic_device_util.get_platform_info()`.
3. Removes unused imports to the now-deprecated sonic-daemon-base package and sonic_device_util.py module
This is the next step toward resolving https://github.com/Azure/sonic-buildimage/issues/4999
Also reverted my previous change in which device_info.get_platform() would first try obtaining the platform ID string from Config DB and fall back to gathering it from machine.conf upon failure because this function is called by sonic-cfggen before the data is in the DB, in which case, the db_connect() call will hang indefinitely, which was not the behavior I expected. As of now, the function will always reference machine.conf.
* [platform] Add Support For Environment Variable
This PR adds the ability to read environment file from /etc/sonic.
the file contains immutable SONiC config attributes such as platform,
hwsku, version, device_type. The aim is to minimize calls being made
into sonic-cfggen during boot time.
singed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* Changes to add template support for copp.json.
This is needed so that we can install differnt type of
Traps based on Device Role (Tor/Leaf/Mgmt/etc...).
Initial use case is to install DHCP/DHCPv6 tarp only
for tor router.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fixed based on review comments.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fixed based on review comment.
virtual-chassis test uses multiple vs instances to simulate a
modular switch and a redis-chassis service is required to run on
the vs instance that represents a supervisor card.
This change allows vs docker start redis-chassis service according
to external config file.
**- Why I did it**
To support virtual-chassis setup, so that we can test distributed forwarding feature in virtual sonic environment, see `Distributed forwarding in a VOQ architecture HLD` pull request at https://github.com/Azure/SONiC/pull/622
**- How I did it**
The sonic-vs start.sh is enhanced to start new redis_chassis service if external chassis config file found. The config file doesn't exist in current vs environment, start.sh will behave like before.
**- How to verify it**
The swss/test still pass. The chassis_db service is verified in virtual-chassis topology and tests which are in following PRs.
Signed-off-by: Honggang Xu <hxu@arista.com>
(cherry picked from commit c1d45cf81ce3238be2dcbccae98c0780944981ce)
Co-authored-by: Honggang Xu <hxu@arista.com>
Consolidate common SONiC Python-language functionality into one shared package (sonic-py-common) and eliminate duplicate code.
The package currently includes three modules:
- daemon_base
- device_info
- logger
Fix for the host unmount issue through PR https://github.com/Azure/sonic-buildimage/pull/4558 and https://github.com/Azure/sonic-buildimage/pull/4865 creates the timeout of syslog.socket closure during reboot since the journald socket closure has been included in syslog.socket
Removed the journal socket closure. The host unmount is fixed with just stopping the services which gets restarted only after /var/log unmount and not causing the unmount issues.
`sonic-installer list` is a read-only command. Specify it as such in the sudoers file.
This will also ensure the new `show boot` command, which calls `sudo sonic-installer list` under the hood doesn't fail due to permissions.
Otherwise, it may cause issues for warm restarts, warm reboot.
Warm restart of swss will start nat which is not expected for warm
restart. Also it is observed that during warm-reboot script execution
nat container gets started after it was killed. This causes removal of
nat dump generated by nat previously:
A check [ -f /host/warmboot/nat/nat_entries.dump ] || echo "NAT dump
does not exists" was added right before kexec:
```
Fri Jul 17 10:47:16 UTC 2020 Prepare MLNX ASIC to fastfast-reboot:
install new FW if required
Fri Jul 17 10:47:18 UTC 2020 Pausing orchagent ...
Fri Jul 17 10:47:18 UTC 2020 Stopping nat ...
Fri Jul 17 10:47:18 UTC 2020 Stopped nat ...
Fri Jul 17 10:47:18 UTC 2020 Stopping radv ...
Fri Jul 17 10:47:19 UTC 2020 Stopping bgp ...
Fri Jul 17 10:47:19 UTC 2020 Stopped bgp ...
Fri Jul 17 10:47:21 UTC 2020 Initialize pre-shutdown ...
Fri Jul 17 10:47:21 UTC 2020 Requesting pre-shutdown ...
Fri Jul 17 10:47:22 UTC 2020 Waiting for pre-shutdown ...
Fri Jul 17 10:47:24 UTC 2020 Pre-shutdown succeeded ...
Fri Jul 17 10:47:24 UTC 2020 Backing up database ...
Fri Jul 17 10:47:25 UTC 2020 Stopping teamd ...
Fri Jul 17 10:47:25 UTC 2020 Stopped teamd ...
Fri Jul 17 10:47:25 UTC 2020 Stopping syncd ...
Fri Jul 17 10:47:35 UTC 2020 Stopped syncd ...
Fri Jul 17 10:47:35 UTC 2020 Stopping all remaining containers ...
Warning: Stopping telemetry.service, but it can still be activated by:
telemetry.timer
Fri Jul 17 10:47:37 UTC 2020 Stopped all remaining containers ...
NAT dump does not exists
Fri Jul 17 10:47:39 UTC 2020 Rebooting with /sbin/kexec -e to
SONiC-OS-201911.140-08245093 ...
```
With this change, executed warm-reboot 10 times without hitting this
issue, while without this change the issue is easily reproducible almost
every warm-reboot run.
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
* [sonic-buildimage] Move BGP warm reboot scripts into BGP service /usr/local/bin
* Revert "[sonic-buildimage] Move BGP warm reboot scripts into BGP service /usr/local/bin"
This reverts commit d16d163fc4.
* [sonic-buildimage] Move BGP warm reboot script to BGP service
* [sonic-buildimage] Move BGP warm reboot script to BGP service
* [sonic-buildimage] Move BGP warm reboot script to BGP service
- access DB correctly
* Address code review comments, also change file mode of bgp.sh (+x)
* Address code review comments, also change the file mode of bgp.sh (+x)
* BGP warm reboot script to service, also handle fast boot as indicated by flag saved in StateDB
* BGP warm reboot script to service, code review comments on space alignment
* BGP warm reboot script to service: remove uncesseary space
* BGP warm reboot script to service: replace tab with space
* Code review comments: -) use new multi-db api -) add ignore error from zebra in case it's not configured
* Integrate with multi-ASIC changes committed recently
Co-authored-by: heidi.ou@alibaba-inc.com <heidi.ou@alibaba-inc.com>
* Defect 2082949: Handling Control Plane ACLs so that IPv4 rules and IPv6 rules are not added to the same ACL table
* Previous code review comments of coming up with functions for is_ipv4_rule and is_ipv6_rule is addressed and also raising Exceptions instead of simply aborting when the conflict occurs is handled
* Addressed code review comment to replace duplicate code with already existing functions
* removed raising Exception when rule conflict in Control plane ACLs are found
* added code to remove the rule_props if it is conflicting ACL table versioning rule
* addressed review comment to add ignoring rule in the error statement
Co-authored-by: Madhan Babu <madhan@arc-build-server.mtr.labs.mlnx>
* PCIe Monitor service
* Add rescan to pcie-mon.service when it fails to get all pcie devices
* space
* Clean up
* review comments
* update the pcie status in state db
* update the failed pcie status once at the end
* Update the pcie_status in STATE_DB and rename the service
* Add log to exit the service if the configuration file doesn't exist.
* fix the build failure
* Redo the pcie rescan for pcie-check failed case.
* review comments
* review comments
* review comments
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
This PR has changes to support accessing the bcmsh and bcmcmd utilities on multi ASIC devices
Changes done
- move the link of /var/run/sswsyncd from docker-syncd-brcm.mk to docker_image_ctl.j2
- update the bcmsh and bcmcmd scripts to take -n [ASIC_ID] as an argument on multi ASIC platforms
This pull request was cherry picked from "#1238" to resolve the conflicts.
- Why I did it
Add support to specify source address for TACACS+
- How I did it
Add patches for libpam-tacplus and libnss-tacplus. The patches parse the new option 'src_ip' and store the converted addrinfo. Then the addrinfo is used for TACACS+ connection.
Add a attribute 'src_ip' for table "TACPLUS|global" in configDB
Add some code to adapt to the attribute 'src_ip'.
- How to verify it
Config command for source address PR in sonic-utilities
config tacacs src_ip <ip_address>
- Description for the changelog
Add patches to specify source address for the TACACS+ outgoing packets.
- A picture of a cute animal (not mandatory but encouraged)
**UT logs: **
UT_tacacs_source_intf.txt
* [sonic-buildimage] Changes to make network specific sysctl
common for both host and docker namespace (in multi-npu).
This change is triggered with issue found in multi-npu platforms
where in docker namespace
net.ipv6.conf.all.forwarding was 0 (should be 1) because of
which RS/RA message were triggered and link-local router were learnt.
Beside this there were some other sysctl.net.ipv6* params whose value
in docker namespace is not same as host namespace.
So to make we are always in sync in host and docker namespace
created common file that list all sysctl.net.* params and used
both by host and docker namespace. Any change will get applied
to both namespace.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments and made sure to invoke augtool
only one and do string concatenation of all set commands
* Address Review Comments.
Add changes for syslog support for containers running in namespaces on multi ASIC platforms.
On Multi ASIC platforms
Rsyslog service is only running on the host. There is no rsyslog service running in each namespace.
On multi ASIC platforms the rsyslog service on the host will be listening on the docker0 ip address instead of loopback address.
The rsyslog.conf on the containers is modified to have omfwd target ip to be docker0 ipaddress instead of loopback ip
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
* Changes to make default route programming
correct in multi-asic platform where frr is not running
in host namespace. Change is to set correct administrative distance.
Also make NAMESPACE* enviroment variable available for all dockers
so that it can be used when needed.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix review comments
* Review comment to check to add default route
only if default route exist and delete is successful.
* [systemd-generator]: Fix the code to make sure that dependencies
of host services are generated correctly for multi-asic platforms.
Add code to make sure that systemd timer files are also modified
to add the correct service dependency for multi-asic platforms.
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
* [systemd-generator]: Minor fix, remove debug code and
remove unused variable.
**- Why I did it**
Initially, the critical_processes file contains either the name of critical process or the name of group.
For example, the critical_processes file in the dhcp_relay container contains a single group name
`isc-dhcp-relay`. When testing the autorestart feature of each container, we need get all the critical
processes and test whether a container can be restarted correctly if one of its critical processes is
killed. However, it will be difficult to differentiate whether the names in the critical_processes file are
the critical processes or group names. At the same time, changing the syntax in this file will separate the individual process from the groups and also makes it clear to the user.
Right now the critical_processes file contains two different kind of entries. One is "program:xxx" which indicates a critical process. Another is "group:xxx" which indicates a group of critical processes
managed by supervisord using the name "xxx". At the same time, I also updated the logic to
parse the file critical_processes in supervisor-proc-event-listener script.
**- How to verify it**
We can first enable the autorestart feature of a specified container for example `dhcp_relay` by running the comman `sudo config container feature autorestart dhcp_relay enabled` on DUT. Then we can select a critical process from the command `docker top dhcp_relay` and use the command `sudo kill -SIGKILL <pid>` to kill that critical process. Final step is to check whether the container is restarted correctly or not.
When building the SONiC image, used systemd to mask all services which are set to "disabled" in init_cfg.json.
This PR depends on https://github.com/Azure/sonic-utilities/pull/944, otherwise `config load_minigraph will fail when trying to restart disabled services.
* Add secureboot support in boot0
* Initramfs changes for secureboot on Aboot devices
* Do not compress squashfs and gz in fs.zip
It doesn't make much sense to do so since these files are already
compressed.
Also not compressing the squashfs has the advantage of making it
mountable via a loop device.
* Add loopoffset parameter to initramfs-tools
- Ensure all features (services) are in the configured state when hostcfgd starts
- Better functionalization of code
- Also replace calls to deprecated `has_key()` method in `tacacs_server_handler()` and `tacacs_global_handler()` with `in` keyword.
This PR depends on https://github.com/Azure/sonic-utilities/pull/944, otherwise `config load_minigraph` will fail when trying to restart disabled services.
While migrating to SONiC 20181130, identified a couple of issues:
1. union-mount needs /host/machine.conf parameters for vendor specific checks : however, in case of migration, the /host/machine.conf is extracted from ONIE only in https://github.com/Azure/sonic-buildimage/blob/master/files/image_config/platform/rc.local#L127.
2. Since grub.cfg is updated to have net.ifnames=0 biosdevname=0, 70-persistent-net.rules changes are no longer required.
Don't limit iptables connection tracking to TCP protocol; allow connection tracking for all protocols. This allows services like NTP, which is UDP-based, to receive replies from an NTP server even if the port is blocked, as long as it is in reply to a request sent from the device itself.
* Fix the Build on 201911 (Stretch) where the directory
/usr/lib/systemd/system/ does not exist so creating
manually. Change should not harm Master (buster) where
the directory is created by Linux
* Fix as per review comments
* Support rw files allowlist for Sonic Secure Boot
* Improve the performance
* fix bug
* Move the config description into a md file
* Change to use a simple way to remove the blank line
* Support chmod a-x in rw folder
* Change function name
* Change some unnecessary words
**- Why I did it**
To ensure telemetry service is enabled by default after installing a fresh SONiC image
**- How I did it**
Set telemetry feature status to "enabled" when generating init_cfg.json file
Found another syncd timing issue related to clock going backwards.
To be safe disable the ntp long jump.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
**- Why I did it**
When I tested auto-restart feature of swss container by manually killing one of critical processes in it, swss will be stopped. Then syncd container as the peer container should also be
stopped as expected. However, I found sometimes syncd container can be stopped, sometimes
it can not be stopped. The reason why syncd container can not be stopped is the process
(/usr/local/bin/syncd.sh stop) to execute the stop() function will be stuck between the lines 164 –167. Systemd will wait for 90 seconds and then kill this process.
164 # wait until syncd quit gracefully
165 while docker top syncd$DEV | grep -q /usr/bin/syncd; do
166 sleep 0.1
167 done
The first thing I did is to profile how long this while loop will spin if syncd container can be
normally stopped after swss container is stopped. The result is 5 seconds or 6 seconds. If syncd
container can be normally stopped, two messages will be written into syslog:
str-a7050-acs-3 NOTICE syncd#dsserve: child /usr/bin/syncd exited status: 134
str-a7050-acs-3 INFO syncd#supervisord: syncd [5] child /usr/bin/syncd exited status: 134
The second thing I did was to add a timer in the condition of while loop to ensure this while loop will be forced to exit after 20 seconds:
After that, the testing result is that syncd container can be normally stopped if swss is stopped
first. One more thing I want to mention is that if syncd container is stopped during 5 seconds or 6 seconds, then the two log messages can be still seen in syslog. However, if the execution
time of while loop is longer than 20 seconds and is forced to exit, although syncd container can be stopped, I did not see these two messages in syslog. Further, although I observed the auto-restart feature of swss container can work correctly right now, I can not make sure the issue which syncd container can not stopped will occur in future.
**- How I did it**
I added a timer around the while loop in stop() function. This while loop will exit after spinning
20 seconds.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
I found that with IPv4Network types, calling list(ip_ntwrk.hosts()) is reliable. However, when doing the same with an IPv6Network, I found that the conversion to a list can hang indefinitely. This appears to me to be a bug in the ipaddress.IPv6Network implementation. However, I could not find any other reports on the web.
This patch changes the behavior to call next() on the ip_ntwrk.hosts() generator instead, which returns the IP address of the first host.
Fix hostcfgd so that changes to the "FEATURE" table in ConfigDB are properly handled. Three changes here:
1. Fix indenting such that the handling of each key actually occurs in the for key in status_data.keys(): loop
2. Add calls to sudo systemctl mask and sudo systemctl unmask as appropriate to ensure changes persist across reboots
3. Substitute returns with continues so that even if one service fails, we still try to handle the others
Note that the masking is persistent, even if the configuration is not saved. We may want to consider only calling systemctl enable/disable in hostcfgd when the DB table changes, and only call systemctl mask/unmask upon calling config save.
**- What I did**
#### wheel package Makefiles
- wheel package Makefiles for sonic-yang-mgmt package.
#### libyang Python APIs:
- python APIs based on libyang
- functions to load/merge yang models and Yang data files
- function to validate data trees based on Yang models
- functions to merge yang data files/trees
- add/set/delete node in schema and data trees
- find data/schema nodes from xpath from the Yang data/schema tree in memory
- find dependencies
- dump the data tree in json/xml
#### Extension of libyang Python APIs:
-- Cropping input config based on Yang Model.
-- Translate input config based on Yang Model.
-- rev Translate input config based on Yang Model.
-- Find xpath of port, portleaf and a yang list.
-- Find if node is key of a list while deletion if yes, then delete the parent.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
Signed-off-by: Ping Mao pmao@linkedin.com
- bug fix : Fixed an issue which the nps ko file was not loaded due to the wrong service file name
- Optimize the code to reduce changes due to the kernel upgrade
- Remove nephos ko file loaded in swss.service.j2 because it has loaded at syncd.service.j2
* Changes to support config-setup service for multi-npu
platforms. For Multi-npu we are not supporting as of
now config initializtion and ZTP. It will support creating
config db from minigraph or using config db from previous
file system
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments.
* Address Review comments
* Address Review Comments of using pyhton based config load_minigraph/
config save/config reload from shell scripts so that we don't duplicate
code. Also while running from shell we will skip stop/start services
done by those commands.
* Updated to use python command so no code duplication.
* [ntp] enable/disable NTP long jump according to reboot type
- Enable NTP long jump after cold reboot.
- Disable NTP long jump after warrm/fast reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* fix typo
* further refactoring
* use sonic-db-cli instead
Since the introduction of VRF, interface-related tables in ConfigDB will have multiple entries, one of which only contains the interface name and no IP prefix. Thus, when iterating over the keys in the tables, we need to ignore the entries which do not contain IP prefixes.
and then we load image and reboot even if there was existing
config_db.json we will look for DHCP Service. we should disbale
update_graph in such cases. This behaviour is silimar to what we have in
201811 image.
Modified caclmgrd behavior to enhance control plane security as follows:
Upon starting or receiving notification of ACL table/rule changes in Config DB:
1. Add iptables/ip6tables commands to allow all incoming packets from established TCP sessions or new TCP sessions which are related to established TCP sessions
2. Add iptables/ip6tables commands to allow bidirectional ICMPv4 ping and traceroute
3. Add iptables/ip6tables commands to allow bidirectional ICMPv6 ping and traceroute
4. Add iptables/ip6tables commands to allow all incoming Neighbor Discovery Protocol (NDP) NS/NA/RS/RA messages
5. Add iptables/ip6tables commands to allow all incoming IPv4 DHCP packets
6. Add iptables/ip6tables commands to allow all incoming IPv6 DHCP packets
7. Add iptables/ip6tables commands to allow all incoming BGP traffic
8. Add iptables/ip6tables commands for all ACL rules for recognized services (currently SSH, SNMP, NTP)
9. For all services which we did not find configured ACL rules, add iptables/ip6tables commands to allow all incoming packets for those services (allows the device to accept SSH connections before the device is configured)
10. Add iptables rules to drop all packets destined for loopback interface IP addresses
11. Add iptables rules to drop all packets destined for management interface IP addresses
12. Add iptables rules to drop all packets destined for point-to-point interface IP addresses
13. Add iptables rules to drop all packets destined for our VLAN interface gateway IP addresses
14. Add iptables/ip6tables commands to allow all incoming packets with TTL of 0 or 1 (This allows the device to respond to tools like tcptraceroute)
15. If we found control plane ACLs in the configuration and applied them, we lastly add iptables/ip6tables commands to drop all other incoming packets
* Changes for LLDP for Multi NPU Platoforms:-
a) Enable LLDP for Host namespace for Management Port
b) Make sure Management IP is avaliable in per asic namespace
needed for LLDP Chassis configuration
c) Make sure chassis mac-address is correct in per asic namespace
d) Do not run lldp on eth0 of per asic namespace and avoid chassis
configuration for same
e) Use Linux hostname instead from Device Metadata for lldp chassis
configuration since in multi-npu platforms device metadata hostname
will be differnt
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comment with following changes:
a) Use Device Metadata hostname even in per namespace conatiner.
updated minigraph parsing for same to have hostname as system
hostname and add new key for asic name
b) Minigraph changes to have MGMT_INTERFACE Key in per asic/namespace
config also as needed for LLDP for setting chassis management IP.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments
Dynamic threshold setting changed to 0 and WRED profile green min threshold set to 250000 for Tomahawk devices
Changed the dynamic threshold settings in pg_profile_lookup.ini
Added a macro for WRED profiles in qos.json.j2 for Tomahawk devices
Necessary changes made in qos.config.j2 to use the macro if present
Signed-off-by: Neetha John <nejo@microsoft.com>
* Multi DB with namespace support, Introducing the database_global.json file
for supporting accessing DB's in other namespaces for service running in
linux host
* Updates based on comments
* Adding the j2 templates for database_config and database_global files.
* Updating to retrieve the redis DIR's to be mounted from database_global.json file.
* Additional check to see if asic.conf file exists before sourcing it.
* Updates based on PR comments discussion.
* Review comments update
* Updates to the argument "-n" for namespace used in both context of parsing minigraph and multi DB access.
* Update with the attribute "persistence_for_warm_boot" that was added to database_config.json file earlier.
* Removing the database_config.json file to avioid confusion in future.
We use the database_config.json.j2 file to generate database_config.json files dynamically.
* Update the comments for sudo usage in docker_image_ctrl.j2
* Update with the new logic in PING PONG tests using sonic-db-cli. With this we wait till the
PONG response is received when redis server is up.
* Similar changes in swss and syncd scripts for the PING tests with sonic-db-cli
* Updated with a missing , in the database_config.json.j2 file, Do pip install of j2cli in docker-base-buster.
1. ebtables -t filter -A FORWARD -p 802_1Q --vlan-encap 0806 -j DROP
The ARP packet with vlan tag can't match the default rule.
Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>
currently, vs docker always create 32 front panel ports.
when vs docker starts, it first detects the peer links
in the namespace and then setup equal number of front panel
interfaces as the peer links.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
* Run fsck filesystem check support prior mounting filesystem
If the filesystem become non clean ("dirty"), SONiC does not run fsck to
repair and mark it as clean again.
This patch adds the functionality to run fsck on each boot, prior to the
filesystem being mounted. This allows the filesystem to be repaired if
needed.
Note that if the filesystem is maked as clean, fsck does nothing and simply
return so this is perfectly fine to call fsck every time prior to mount the
filesystem.
How to verify this patch (using bash):
Using an image without this patch:
Make the filesystem "dirty" (not clean)
[we are making the assumption that filesystem is stored in /dev/sda3 - Please adjust depending of the platform]
[do this only on a test platform!]
dd if=/dev/sda3 of=superblock bs=1 count=2048
printf "$(printf '\\x%02X' 2)" | dd of="superblock" bs=1 seek=1082 count=1 conv=notrunc &> /dev/null
dd of=/dev/sda3 if=superblock bs=1 count=2048
Verify that filesystem is not clean
tune2fs -l /dev/sda3 | grep "Filesystem state:"
reboot and verify that the filesystem is still not clean
Redo the same test with an image with this patch, and verify that at next reboot the filesystem is repaired and becomes clean.
fsck log is stored on syslog, using the string FSCK as markup.
The one big bgp configuration template was splitted into chunks.
Currently we have three types of bgp neighbor peers:
general bgp peers. They are represented by CONFIG_DB::BGP_NEIGHBOR table entries
dynamic bgp peers. They are represented by CONFIG_DB::BGP_PEER_RANGE table entries
monitors bgp peers. They are represented by CONFIG_DB::BGP_MONITORS table entries
This PR introduces three templates for each peer type:
bgp policies: represent policieas that will be applied to the bgp peer-group (ip prefix-lists, route-maps, etc)
bgp peer-group: represent bgp peer group which has common configuration for the bgp peer type and uses bgp routing policy from the previous item
bgp peer-group instance: represent bgp configuration, which will be used to instatiate a bgp peer-group for the bgp peer-type. Usually this one is simple, consist of the referral to the bgp peer-group, bgp peer description and bgp peer ip address.
This PR redefined constant.yml file. Now this file has a setting for to use or don't use bgp_neighbor metadata. This file has more parameters for now, which are not used. They will be used in the next iteration of bgpcfgd.
Currently all tests have been disabled. I'm going to create next PR with the tests right after this PR is merged.
I'm going to introduce better bgpcfgd in a short time. It will include support of dynamic changes for the templates.
FIX:: #4231
- create a file in files/image_config/ntp/ntp-systemd-wrapper to add mgmt vrf related start cmd for ntp service. So that the default /usr/lib/ntp/ntp-systemd-wrapper can be overriden during build time.
- modify build_debian.sh to cp files/image_config/ntp/ntp-systemd-wrapper to /usr/lib/ntp/ntp-systemd-wrapper during build time.
Co-authored-by: Bing Sun <Bing_Sun@dell.com>
do mount/umount in the chroot environment
install cron explicitly
install rasdaemon as a replacement for mcelog
switch python package docker-py to docker
- build SONIC_STRETCH_DOCKERS in sonic-slave-stretch docker
- build image related module in sonic-slave-buster docker.
This includes all kernels modules and some packages
Signed-off-by: Guohan Lu <lguohan@gmail.com>
[sonic-yang-models]: First version of yang models for Port, VLan, Interface, PortChannel, loopback and ACL.
YANG models as per Guidelines.
Guideline doc: https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
[sonic-yang-models/tests]: YANG model test code and JSON input for testing.
[sonic-yang-models/setup.py]: Build infra for yang models.
**- What I did**
Created Yang model for Sonic.
Tables: PORT, VLAN, VLAN_INTERFACE, VLAN_MEMBER, ACL_RULE, ACL_TABLE, INTERFACE.
Created build infra files using which a new package (sonic-yang-models) can be build and can be deployed on sonic switches. Yang models will be part of this new package.
**- How I did it**
Wrote yang models based on Guideline doc:
https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
and
https://github.com/Azure/SONiC/wiki/Configuration.
Wrote python wheel Package infra which runs test for these Yang models using a json files which consists configuration as per yang models. These configs are for negative tests, which means we want to test that most must condition, pattern and when condition works as expected.
**- How to verify it**
Build Logs and testing:
———————————————————————————————————
```
/sonic/src/sonic-yang-models /sonic
running test
running egg_info
writing top-level names to sonic_yang_models.egg-info/top_level.txt
writing dependency_links to sonic_yang_models.egg-info/dependency_links.txt
writing sonic_yang_models.egg-info/PKG-INFO
reading manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
writing manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
running build_ext
----------------------------------------------------------------------
Ran 0 tests in 0.000s
OK
running bdist_wheel
running build
running build_py
(Reading database ... 155852 files and directories currently installed.)
Preparing to unpack .../libyang_1.0.73_amd64.deb ...
Unpacking libyang (1.0.73) over (1.0.73) ...
Setting up libyang (1.0.73) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
Processing triggers for man-db (2.7.6.1-2) ...
(Reading database ... 155852 files and directories currently installed.)
Preparing to unpack .../libyang-cpp_1.0.73_amd64.deb ...
Unpacking libyang-cpp (1.0.73) over (1.0.73) ...
Setting up libyang-cpp (1.0.73) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
(Reading database ... 155852 files and directories currently installed.)
Preparing to unpack .../python3-yang_1.0.73_amd64.deb ...
Unpacking python3-yang (1.0.73) over (1.0.73) ...
Setting up python3-yang (1.0.73) ...
INFO:YANG-TEST:module: sonic-vlan is loaded successfully
ERROR:YANG-TEST:Could not get module: sonic-head
INFO:YANG-TEST:module: sonic-portchannel is loaded successfully
INFO:YANG-TEST:module: sonic-acl is loaded successfully
INFO:YANG-TEST:module: sonic-loopback-interface is loaded successfully
ERROR:YANG-TEST:Could not get module: sonic-port
INFO:YANG-TEST:module: sonic-interface is loaded successfully
INFO:YANG-TEST:
------------------- Test 1: Configure a member port in VLAN_MEMBER table which does not exist.---------------------
libyang[0]: Leafref "/sonic-port:sonic-port/sonic-port:PORT/sonic-port:PORT_LIST/sonic-port:port_name" of value "Ethernet156" points to a non
-existing leaf. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST[vlan_name='Vlan100'][port='Ethernet156']/port)
INFO:YANG-TEST:Configure a member port in VLAN_MEMBER table which does not exist. Passed
INFO:YANG-TEST:
------------------- Test 2: Configure non-existing ACL_TABLE in ACL_RULE.---------------------
libyang[0]: Leafref "/sonic-acl:sonic-acl/sonic-acl:ACL_TABLE/sonic-acl:ACL_TABLE_LIST/sonic-acl:ACL_TABLE_NAME" of value "NOT-EXIST" points
to a non-existing leaf. (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NOT-EXIST'][RULE_NAME='Rule_20']/ACL_TABLE_NAME)
INFO:YANG-TEST:Configure non-existing ACL_TABLE in ACL_RULE. Passed
INFO:YANG-TEST:
------------------- Test 3: Configure IP_TYPE as ARP and ICMPV6_CODE in ACL_RULE.---------------------
libyang[0]: When condition "boolean(IP_TYPE[.='ANY' or .='IP' or .='IPV6' or .='IPv6ANY'])" not satisfied. (path: /sonic-acl:sonic-acl/ACL_RU
LE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V4'][RULE_NAME='Rule_40']/ICMPV6_CODE)
INFO:YANG-TEST:Configure IP_TYPE as ARP and ICMPV6_CODE in ACL_RULE. Passed
INFO:YANG-TEST:
INFO:YANG-TEST:
------------------- Test 4: Configure IP_TYPE as ipv4any and SRC_IPV6 in ACL_RULE.---------------------
libyang[0]: When condition "boolean(IP_TYPE[.='ANY' or .='IP' or .='IPV6' or .='IPv6ANY'])" not satisfied. (path: /sonic-acl:sonic-acl/ACL_RU
LE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V4'][RULE_NAME='Rule_20']/SRC_IPV6)
INFO:YANG-TEST:Configure IP_TYPE as ipv4any and SRC_IPV6 in ACL_RULE. Passed
------------------- Test 5: Configure l4_src_port_range as 99999-99999 in ACL_RULE---------------------
libyang[0]: Value "99999-99999" does not satisfy the constraint "([0-9]{1,4}|[0-5][0-9]{4}|[6][0-4][0-9]{3}|[6][5][0-2][0-9]{2}|[6][5][3][0-5]{2}|[6][5][3][6][0-5])-([0-9]{1,4}|[0-5][0-9]{4}|[6][0-4][0-9]{3}|[6][5][0-2][0-9]{2}|[6][5][3][0-5]{2}|[6][5][3][6][0-5])" (range, length, or pattern). (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V6'][RULE_NAME='Rule_20']/L4_SRC_PORT_RANGE)
INFO:YANG-TEST:Configure l4_src_port_range as 99999-99999 in ACL_RULE Passed
INFO:YANG-TEST:
------------------- Test 6: Configure empty string as ip-prefix in INTERFACE table.---------------------
libyang[0]: Invalid value "" in "ip-prefix" element. (path: /sonic-interface:sonic-interface/INTERFACE/INTERFACE_LIST[interface='Ethernet8'][ip-prefix='']/ip-prefix)
INFO:YANG-TEST:Configure empty string as ip-prefix in INTERFACE table. Passed
INFO:YANG-TEST:
------------------- Test 7: Configure Wrong family with ip-prefix for VLAN_Interface Table---------------------
libyang[0]: Must condition "(contains(../ip-prefix, ':') and current()='IPv6') or (contains(../ip-prefix, '.') and current()='IPv4')" not satisfied. (path: /sonic-vlan:sonic-vlan/VLAN_INTERFACE/VLAN_INTERFACE_LIST[vlanid='100'][ip-prefix='2a04:5555:66:7777::1/64']/family)
INFO:YANG-TEST:Configure Wrong family with ip-prefix for VLAN_Interface Table Passed
INFO:YANG-TEST:
------------------- Test 8: Configure IP_TYPE as ARP and DST_IPV6 in ACL_RULE.---------------------
libyang[0]: When condition "boolean(IP_TYPE[.='ANY' or .='IP' or .='IPV6' or .='IPV6ANY'])" not satisfied. (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NS
W-PACL-V6'][RULE_NAME='Rule_20']/DST_IPV6)
INFO:YANG-TEST:Configure IP_TYPE as ARP and DST_IPV6 in ACL_RULE. Passed
INFO:YANG-TEST:
------------------- Test 9: Configure INNER_ETHER_TYPE as 0x080C in ACL_RULE.---------------------
libyang[0]: Value "0x080C" does not satisfy the constraint "(0x88CC|0x8100|0x8915|0x0806|0x0800|0x86DD|0x8847)" (range, length, or pattern). (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V4'][RULE_NAME='Rule_40']/INNER_ETHER_TYPE)
INFO:YANG-TEST:Configure INNER_ETHER_TYPE as 0x080C in ACL_RULE. Passed
INFO:YANG-TEST:
------------------- Test 10: Add dhcp_server which is not in correct ip-prefix format.---------------------
libyang[0]: Invalid value "10.186.72.566" in "dhcp_servers" element. (path: /sonic-vlan:sonic-vlan/VLAN/VLAN_LIST/dhcp_servers[.='10.186.72.566'])
INFO:YANG-TEST:Add dhcp_server which is not in correct ip-prefix format. Passed
INFO:YANG-TEST:
------------------- Test 11: Configure undefined acl_table_type in ACL_TABLE table.---------------------
libyang[0]: Invalid value "LAYER3V4" in "type" element. (path: /sonic-acl:sonic-acl/ACL_TABLE/ACL_TABLE_LIST[ACL_TABLE_NAME='NO-NSW-PACL-V6']/type)
INFO:YANG-TEST:Configure undefined acl_table_type in ACL_TABLE table. Passed
INFO:YANG-TEST:
------------------- Test 12: Configure undefined packet_action in ACL_RULE table.---------------------
libyang[0]: Invalid value "SEND" in "PACKET_ACTION" element. (path: /sonic-acl:sonic-acl/ACL_RULE/ACL_RULE_LIST/PACKET_ACTION)
INFO:YANG-TEST:Configure undefined packet_action in ACL_RULE table. Passed
INFO:YANG-TEST:
------------------- Test 13: Configure wrong value for tagging_mode.---------------------
libyang[0]: Invalid value "non-tagged" in "tagging_mode" element. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST/tagging_mode)
INFO:YANG-TEST:Configure wrong value for tagging_mode. Passed
INFO:YANG-TEST:
------------------- Test 14: Configure vlan-id in VLAN_MEMBER table which does not exist in VLAN table.---------------------
libyang[0]: Leafref "../../../VLAN/VLAN_LIST/vlanid" of value "200" points to a non-existing leaf. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST[vlanid='200'][port='Ethernet0']/vlanid)
libyang[0]: Leafref "../../../VLAN/VLAN_LIST/vlanid" of value "200" points to a non-existing leaf. (path: /sonic-vlan:sonic-vlan/VLAN_MEMBER/VLAN_MEMBER_LIST[vlanid='200'][port='Ethernet0']/vlanid)
INFO:YANG-TEST:Configure vlan-id in VLAN_MEMBER table which does not exist in VLAN table. Passed
INFO:YANG-TEST:All Test Passed
../../target/debs/stretch/libyang0.16_0.16.105-1_amd64.deb installtion failed
../../target/debs/stretch/libyang-cpp0.16_0.16.105-1_amd64.deb installtion failed
../../target/debs/stretch/python2-yang_0.16.105-1_amd64.deb installtion failed
YANG Tests passed
Passed: pyang -f tree ./yang-models/*.yang > ./yang-models/sonic_yang_tree
copying tests/yangModelTesting.py -> build/lib/tests
copying tests/test_sonic_yang_models.py -> build/lib/tests
copying tests/__init__.py -> build/lib/tests
running egg_info
writing top-level names to sonic_yang_models.egg-info/top_level.txt
writing dependency_links to sonic_yang_models.egg-info/dependency_links.txt
writing sonic_yang_models.egg-info/PKG-INFO
reading manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
writing manifest file 'sonic_yang_models.egg-info/SOURCES.txt'
installing to build/bdist.linux-x86_64/wheel
running install
running install_lib
creating build/bdist.linux-x86_64/wheel
creating build/bdist.linux-x86_64/wheel/tests
copying build/lib/tests/yangModelTesting.py -> build/bdist.linux-x86_64/wheel/tests
copying build/lib/tests/test_sonic_yang_models.py -> build/bdist.linux-x86_64/wheel/tests
copying build/lib/tests/__init__.py -> build/bdist.linux-x86_64/wheel/tests
running install_data
creating build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data
creating build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data
creating build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-head.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-acl.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-interface.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-loopback-interface.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-port.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-portchannel.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
copying ./yang-models/sonic-vlan.yang -> build/bdist.linux-x86_64/wheel/sonic_yang_models-1.0.data/data/yang-models
```
* Install kubernetes worker node packages, if enabled.
* Minor updates
* Added some comments
* Updates per review comments.
Built a private image to test to work fine.
* Remove the removed file.
* Update per comments
Make a fix, as kubeadm no demands a higher version of kubelet & kubectl.
As kubeadm auto install kubectl & kubelet, removing explicit install is an easier/robust fix.
* Changes per review comments.
* Updates per comments.
1) Dropped helper & pod scripts
2) Made install verbose
* Drop creation of pods subdir, as this PR does not use them.
* From comments to 'n' per review comments.
* 1) kubeadm.conf is created as part of kubeadm package install. Hence dropped explicit copy.
sonic-netns-exec fails to execute below command in swss.sh:
sonic-netns-exec "$NET_NS" sonic-db-cli $1 EVAL "
local tables = {$2}
for i = 1, table.getn(tables) do
local matches = redis.call('KEYS', tables[i])
for j,name in ipairs(matches) do
redis.call('DEL', name)
end
end" 0
This command fails with error " redis.exceptions.ResponseError: value is not an integer or out of range" .
Root cause:
When sonic-netns-exec executes the above function, argument passed to sonic-db-cli is NOT executed as a single script.
The argument is passed as separate keywords to sonic-db-cli, as below:
['EVAL', 'local', 'tables', '=', "{'PORT_TABLE*'}", 'for', 'i', '=', '1,', 'table.getn(tables)', 'do', 'local', 'matches', '=', "redis.call('KEYS',", 'tables[i])', 'for', 'j,name', 'in', 'ipairs(matches)', 'do', "redis.call('DEL',", 'name)', 'end', 'end', '0']
- How I did it
To make sure that the parameters are passed as they were set initially, fix sonic-netns-exec to use double quoted "$@", where "$@" is "$1" "$2" "$3" ... "${N}"
After fix, the argument passed to sonic-db-cli is as below:
Argument passed to sonic-db-cli:
['EVAL', "\n local tables = {'PORT_TABLE*'}\n for i = 1, table.getn(tables) do\n local matches = redis.call('KEYS', tables[i])\n for j,name in ipairs(matches) do\n redis.call('DEL', name)\n end\n end", '0']
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
