#### Why I did it
Including below commits:
```
2c6ed2e 2023-09-14 | Support interface speed for PortChannels (#262) [Lukas Stockner]
```
##### Work item tracking
- Microsoft ADO **(number only)**: 25085425
Why I did it
ConfigDBConnector in supervisor-proc-exit-listener uses default parameter to connect CONFIG_DB (connect by 127.0.0.1:6379) which would fail at non-host network mode container, because they are not sharing the same network and socket.
How I did it
Add a new parameter use_unix_socket_path to this script to indicate whether to use socket to connect CONFIG_DB.
How to verify it
Build image and install it, kill critical processes in container and container crushed.
#### Why I did it
The sflow debug container does not include the debug symbols of hsflowd.
#### How I did it
Add the hsflowd debug dependency.
#### How to verify it
Build the sflow debug container, get into the container, open gdb to load the hsflowd program. Verified debug symbol is available.
In #15080, there was a command added to re-add 127.0.0.1/8 to the lo
interface when the networking configuration is being brought down.
However, the trigger for that command is `down`, which, looking at
ifupdown2 configuration files, runs immediately after 127.0.0.1/16 is
removed. This means there may be a period of time where there are no
loopback addresses assigned to the lo interface, and redis commands will
fail.
Fix this by changing this to pre-down, which should run well before
127.0.0.1/16 is removed, and should always leave lo with a loopback
address.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
src/sonic-mgmt-common
```
* 14962fe - (HEAD -> master, origin/master, origin/HEAD) CVL database access layer changes (#100) (30 hours ago) [Balachandar Mani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-host-services
```
* 1a5a0bf - (HEAD -> master, origin/master, origin/HEAD) Remove command to install libhiredis deb file (#74) (8 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 0dafb55 - (HEAD -> master, origin/master, origin/HEAD) Remove command to install libhiredis deb file (#398) (9 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
PTF container needs to use new grpcio package.
Work item tracking
Microsoft ADO (number only):
How I did it
Update versions-py2
How to verify it
Check pipeline artifact
Signed-off-by: anamehra anamehra@cisco.com
Added a check for DEVICE_METADATA before accessing the data. This prevents the j2 failure when var is not available.
This reverts commit 51fb6d7d9f.
The new sonic-mgmt docker image has ansible upgraded. Encountered some issues that are hard to debug to have a quick fix. Let's revert the change for now. The new sonic-mgmt docker image was kept for further debugging and fixing. After all the issues are fixed, we'll need to apply this change again.
### Why I did it
Currently there is only rsyslog plugin support for /var/log/syslog, meaning we do not detect events that occur in frr logs such as BGP Hold Timer Expiry that appears in frr/bgpd.log.
##### Work item tracking
- Microsoft ADO **(number only)**: 13366345
#### How I did it
Add omprog action to frr/bgpd.log and frr/zebra.log. Add appropriate regex for both events.
#### How to verify it
sonic-mgmt test case
Why I did it
This PR is part of sonic-mgmt-docker Python3 migration project.
Work item tracking
Microsoft ADO (number only): 24397943
How I did it
Upgrade Ansible to 6.7.0
Make Python3 as the default interpreter. python is a soft link to python3. If you want to use python2, use the command python2 explicitly.
Upgrade some pip packages to higher version in order to meet security requirement.
How to verify it
Build a private sonic-mgmt-docker successfully.
Verify python is python3.
Verify python2 is working with 202012 and 202205 branch.
Verify python3 is working with master branch.
* [ci] For vstest, make sure kernel modules are built and installed
Make sure that the agent that vstest runs on has the team module
available. If it is not available, then build and install it.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Use version of script that's checked into sonic-swss-common
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Write error message to syslog when add user failed or connect to TACACS server failed.
#### Why I did it
With these messages, we can downgrade TACACS server with issue to lower priority.
##### Work item tracking
- Microsoft ADO: 24667696
#### How I did it
Write error message to syslog when add user failed or connect to TACACS server failed.
#### How to verify it
Pass all UT.
Manually verify error message generated.
### Description for the changelog
Write error message to syslog when add user failed or connect to TACACS server failed.
This feature was meant to be enabled but was accidentally left disabled.
Also downgrades the select/deselect messages to KERN_INFO to reduce log
spam.
Fixes#14546.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Why I did it
Add dhcp_server ipv4 feature to SONiC.
HLD: sonic-net/SONiC#1282
How I did it
To be clarify: This container is disabled by INCLUDE_DHCP_SERVER = n for now, which would cause container not build.
Add INCLUDE_DHCP_SERVER to indicate whether to build dhcp_server container
Add docker file for dhcp_server, build and install kea-dhcp4 inside container
Add template file for dhcp_server container services.
Add entry for dhcp_server to FEATURE table in config_db.
How to verify it
Build image with INCLUDE_DHCP_SERVER = y to verify:
Image can be install successfully without crush.
By config feature state dhcp_server enabled to enable dhcp_server.
* [swss] Chassis db clean up optimization and bug fixes
This commit includes the following changes:
- Fix for regression failure due to error in finding CHASSIS_APP_DB in
pizzabox (#PR 16451)
- After attempting to delete the system neighbor entries from
chassis db, before starting clearing the system interface entries,
wait for sometime only if some system neighbors were deleted.
If there are no system neighbors entries deleted for the asic coming up,
no need to wait.
- Similar changes for system lag delete. Before deleting the
system lag, wait for some time only if some system lag memebers were
deleted. If there are no system lag members deleted no need to wait.
- Flush the SYSTEM_NEIGH_TABLE from the local STATE_DB. While asic
is coming up, when system neigh entries are deleted from chassis ap
db (as part of chassis db clean up), there is no orchs/process running to
process the delete messages from chassis redis. Because of this, stale system
neigh are entries present in the local STATE_DB. The stale entries result in
creation of orphan (no corresponding data path/asic db entry) kernel neigh
entries during STATE_DB:SYSTEM_NEIGH_TABLE entries processing by nbrmgr (after
the swss serive came up). This is avoided by flushing the SYSTEM_NEIGH_TABLE from
the local STATE_DB when sevice comes up.
Signed-off-by: vedganes <veda.ganesan@nokia.com>
* [swss] Chassis db clean up bug fixes review comment fix - 1
Debug logs added for deletion of other tables (SYSTEM_INTERFACE and SYSTEM_LAG_TABLE)
Signed-off-by: vedganes <veda.ganesan@nokia.com>
---------
Signed-off-by: vedganes <veda.ganesan@nokia.com>
Why I did it
Add another cli entry: show dhcp_relay ipv4 counter
Fix get all interface offset issue
Work item tracking
Microsoft ADO (17271822):
How I did it
show dhcp_relay ipv4 counter -i [ifname]
show dhcp4relay_counters counts -i [ifname]
How to verify it
show dhcp4relay_counters counts | more 10
Message Type Ethernet144(RX)
- Why I did it
To support the building of ARM-based docker-sonic-vs.gz
- How I did it
Fixed SYNCD_VS build rule to be architecture-specific.
- How to verify it
make configure PLATFORM=vs PLATFORM_ARCH=arm64
make target/docker-sonic-vs.gz
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
### Why I did it
Need new gnmi client for dash test.
### How I did it
I have updated gnxi repo, and this PR is used to get latest change.
#### How to verify it
Run end2end test for DASH.
#### Why I did it
src/sonic-mgmt-common
```
* ee3029d - (HEAD -> master, origin/master, origin/HEAD) DB Access Layer Merges: (#96) (11 hours ago) [a-barboza]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-linux-kernel
```
* fa40db7 - (HEAD -> master, origin/master, origin/HEAD) Change the system.map file permission only readable by root (#329) (21 hours ago) [xumia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
Need a tool to extend disk size
##### Work item tracking
- Microsoft ADO **(number only)**: 25094467
#### How I did it
Install parted package
#### How to verify it
Use apt list parted command to check if it's installed
Maximum RAM availability for NOS to SONiC migration using raw image in Dell S6100 is 1700MB.
Raw images larger than that cannot be used for NOS to SONiC migration.
- Why I did it
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 which is 255 when fastboot enable and 511 when fastboot disable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
2. Dual ToR Active-Standby | Additional MAC support
SDK/FW bug fixes
1. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
- How I did it
Update SAI version to SAIBuild2211.25.1.4
Update SDK/FW version to 4.6.1062/2012.1062
#### Why I did it
src/sonic-gnmi
```
* 6fd461c - (HEAD -> master, origin/master, origin/HEAD) Get origin from prefix (#149) (17 hours ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Enabling kdump by default for cisco-8000 by setting crashkernel cmdline arg in device installer.conf.
After bootup, sonic-kdump-config wipes crashkernel arg from /host/grub/grub.cfg, and resets USE_KDUMP in /etc/default/kdump-tools, so kdump will not be enabled on subsequent reboot.
How I did it
Setting kdump enable config as part of init_cfg.json for cisco-8000 platforms.
How to verify it
Install SONiC image with kdump enabled by default (device/hwsku/installer.conf), then reboot.
Kdump config should persist on subsequent reboots and kdump loaded during bootup
Signed-off-by: Aman Singhal <amans@cisco.com>
Why I did it
There are many automation PRs pending for PR checker failure issue.
As PR number grows, github api to list prs comes to its limit.
We need to monitor and send alert for these PRs.
Work item tracking
Microsoft ADO (number only): 25064441
How I did it
For auto-cherry pick PRs:
- more than 3 days, comment @author to check
- more than 10 days, stop comment.
- more than 28 days, comment @author PR will be closed
- more than 30 days, close PR
For submodule update HEAD PRs:
- more than 3 days, send alert(submodule PR)
How to verify it
Which release bra
* Change the CAK key length check in config plugin, macsec test profile changes
* Fix the format in add_profile api
The changes needed in various macsec unit tests and config plugin when we move to accept the type 7 encoded key format for macsec. This goes along with PR : sonic-net/sonic-swss#2892 raised earlier.
### Why I did it
The json.hpp header file from that package is used in the sonic-swss-common build. An old version of that header file (from 2016) has been checked into the sonic-swss-common repo. However, since then, there have been changes to that header file, and starting with GCC 12 in Bookworm, generates some errors about variables being possibly uninitialized before use.
##### Work item tracking
- Microsoft ADO **(number only)**: 25027439
#### How I did it
To fix this, install the nlohmann-json3-dev package, and allow using the header file from the Debian package instead of a static checked-in version. The version in Debian Bullseye is much newer than this version.
#### How to verify it
With this change alone, sonic-swss-common will still be using the json.hpp file in its own codebase. The change to actually use the system header file instead of the local header file will happen in a separate PR in the necessary repoes.
### Why I did it
We're not adding any patch on top of hiredis, and there's no apparent reason to build this. Remove the build step here, and just install the package from the Debian repos.
##### Work item tracking
- Microsoft ADO **(number only)**: 24381590
#### How to verify it
Build the SONiC image, and load it. Verify that services come up.
- Why I did it
1. Update Mellanox HW-MGMT package to newer version V.7.0030.1011
2. Replace the SONiC PMON Thermal control algorithm with the one inside the HW-MGMT package on all Nvidia platforms
3. Support Spectrum-4 systems
- How I did it
1. Update the HW-MGMT package version number and submodule pointer
2. Remove the thermal control algorithm implementation from Mellanox platform API
3. Revise the patch to HW-MGMT package which will disable HW-MGMT from running on SIMX
4. Update the downstream kernel patch list
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
There is no reason to build deb package ethtool from source code.
We can install the same version from Debian bullseye mirror.
How I did it
Remove ethtool Makefiles from sonic-buildimage.
Install ethtool via apt-get in pmon container.
On S6100 we are seeing almost 100K interrupts per second on intels i801 SMBUS controller which affects systems performance.
We now disable the i801 driver interrupt and instead enable polling
Microsoft ADO (number only): 24910530
How I did it
Disable the interrupt by passing the interrupt disable feature argument to i2c-i801 driver
How to verify it
This fix is NOT applicable for ARM based platforms. Applicable only for intel based platforms:-
- On SN2700 its already disabled in Mellanox hw-mgmt
- Celestica DX010 and E1031
- Dell S6100 verified the interrupts are no longer incrementing.
- Arista 7260CX3
Signed-off-by: Prince George <prgeor@microsoft.com>
