* Rename asn/deployment_id_asn_map.yaml to constants/constants.yaml
* Fix bgp templates
* Add community for loopback when bgpd is isolated
* Use correct community value
Now it's possible to add and remove peers based on ConfigDB
- What I did
Fixed functionality for dynamically adding/removing static bgp peers.
- How I did it
Split the bgp default template on bgp part and bgp peer part
Changed bgpcfgd to use 1.
- How to verify it
Build an image and run on your DUT
The owner of the generated files (/etc/frr/*.conf) by start.sh is root if it is a new file.
This will cause error when executing "copy running-config startup-config" in vtysh because of privilege issue.
While doing CLI changes for SNMP configuration, few changes are made in backend to handle the modified CLI.
** Changes**
- "community" for "snmp trap" is also made as "configurable". snmpd_conf.j2 is modified to handle the same.
- Changed the snmp.yml file generation from postStartAction to preStartAction in docker_image_ctl.j2 specific to SNMP docker, to ensure that the snmp.yml is generated before sonic-cfggen generates the snmpd.conf.
- Changed to make the code common for management vrf and default vrf. Users can configure snmp trap and snmp listening IP for both management vrf and default vrf.
* [SNMP] management VRF SNMP support
This commit adds SNMP support for Management VRF using l3mdev.
The patch included provides VRF support, there is no single
"listendevice" configuration, rather multiple agentaddress
config options can each have their own "interface" to bind to
using "ip%interface". The snmpd.conf file is accordingly
generated using the snmp.yml file and redis database info.
Adding below the comments of SNMP patch 1376
--------------------------------------------
Since the Linux kernel added support for Virtual Routing
and Forwarding (VRF) in version 4.3
(Note: these won't compile on non-linux platforms)
https://www.kernel.org/doc/Documentation/networking/vrf.txt
Linux users could not use snmpd in its current form to
bind specific listening IP addresses to specific VRF
devices. A simplified description of a VRF inteface
is an interface that is a master (a container of sorts)
that collects a set of physicalinterfaces to form a
routing table.
This set of two patches (one for V5-7-patches and one
for V5-8-patches branches) is almost identical to patch
single "listendevice" configuration. Rather, multiple
agentAddress config options can each have their own
"interface" to bind to using the <ip>%<interface>
syntax.</interface></ip>
-------------------------------------------
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
Introduce a new "sflow" container (if ENABLE_SFLOW is set). The new docker will include:
hsflowd : host-sflow based daemon is the sFlow agent
psample : Built from libpsample repository. Useful in debugging sampled packets/groups.
sflowtool : Locally dump sflow samples (e.g. with a in-unit collector)
In case of SONiC-VS, enable psample & act_sample kernel modules.
VS' syncd needs iproute2=4.20.0-2~bpo9+1 & libcap2-bin=1:2.25-1 to support tc-sample
tc-syncd is provided as a convenience tool for debugging (e.g. tc-syncd filter show ...)
Update interfaces of bgpcfd from swsssdk to swsscommon to unify a suit of interface with other component. Meanwhile, we can listen multiple tables at one thread under swsscommon interface.
Signed-off-by: Ze Gan ganze718@gmail.com
- What I did
Move the interface of bgpcfgd from swsssdk to swsscommon. Because bgpcfgd need to listen more events in the future and we want to maintain one kind of APIs, swsscommon is more suitable than swsssdk.
- How I did it
Refactor the BGPConfigDaemon to two components, Daemon and BGPConfigManager. We can register new managers to the Daemon object if we want to listen more events.
this is the first step to moving different databases tables into different database instances
in this PR, only handle multiple database instances creation based on user configuration at /etc/sonic/database_config.json
we keep current method to create single database instance if no extra/new DATABASE configuration exist in database_config.json file.
if user try to configure more db instances at database_config.json , we create those new db instances along with the original db instance existing today.
The configuration is as below, later we can add more db related information if needed:
{
...
"DATABASE": {
"redis-db-01" : {
"port" : "6380",
"database": ["APPL_DB", "STATE_DB"]
},
"redis-db-02" : {
"port" : "6381",
"database":["ASIC_DB"]
},
}
...
}
The detail description is at design doc at Azure/SONiC#271
The main idea is : when database.sh started, we check the configuration and generate corresponding scripts.
rc.local service handle old_config copy when loading new images, there is no dependency between rc.local and database service today, for safety and make sure the copy operation are done before database try to read it, we make database service run after rc.local
Then database docker started, we check the configuration and generate corresponding scripts/.conf in database docker as well.
based on those conf, we create databases instances as required.
at last, we ping_pong check database are up and continue
Signed-off-by: Dong Zhang d.zhang@alibaba-inc.com
* [docker-fpm-frr]: Generate separated staticd.conf for staticd
Generate staticd.conf by templates/staticd.conf.j2 with config DB data
* [docker-fpm-frr]: Remove default_route block from zebra.conf.j2
default_route block already moved to staticd.conf.j2
* [docker-fpm-frr]: Add test for staticd.conf.j2 template
* Add test for staticd.conf.j2 template
* Correct the sample output of zebra.conf.j2 template
* Fix a typo in test_zebra_frr
* [docker-fpm-frr]: Fix test_j2files test errors
* Fix test errors in test_j2files.py and test_j2files_t2_chassis_fe.py
* Fix typo in test_j2files_t2_chassis_fe.py
ARM Architecture support in SONIC
make configure platform=[ASIC_VENDOR_ARCH] PLATFORM_ARCH=[ARM_ARCH]
SONIC_ARCH: default amd64
armhf - arm32bit
arm64 - arm64bit
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Subscribe to both ConfigDB and AppDB
to get notifications to apply LLDP port config
* the operstate file is not consistent
Removing this since it is not serving any purpose
* Remove check for PortInitDone and PortConfigDone
This is not prteset in Config DB
* Remove checking State DB for port creation
* Check for key to be present before fetching it
* Addressing review comments
* Added debug symbols to many debug dockers.
* For debug images *only*:
1) Archive source files into debug image
2) Archived source is copied into /src
3) Created an empty dir /debug
4) Mount both /src as ro & /debug as rw into every docker
5) Login banner will give some details on /src & /debug
6) Devs can copy core file into /debug and view it from inside a container.
7) Dev may create all gdb logs and other data directly into /debug.
* Dropped redundant REDIS_TOOLS per review comments.
* Added debug symbols to frr package and hence FRR based BGP docker.
* 1) Moved dbg_files.sh to scripts/
2) Src directories to archive are now collected from individual Makefiles.
3) Added few more debug symbols
4) Added few more debug dockers.
Here after no more changes except per review comments.
To debug:
Install required version of debug image in Switch or VM.
Copy core file into /debug of host
Get into Docker
gdb /usr/bin/<daemon> -c /debug/<your core file>
set directory /src/... <-- inside gdb to get the source
For non-in-depth debugging:
Download corresponding debug Docker image (docker-...-dbg.gz) to your VM
Load the image
Run image with entrypoint as 'bash' with dir containing core mapped in.
Run gdb on the core.
- create a dockerfile-marcros.j2 file with all common operations
written as j2 macro
- use single dockerfile instruction for COPY and RUN commands
when possible to improve build time
- reorganize dockerfile instructions to make more cache friendly
(in case someday we will remove --no-cache to build docker images)
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
This is a follow-up of sonic-snmpagent PR 92
Now that licensing issues have been solved FRR is distributed with SNMP
support compiled-in. This PR adds the last bits of configuration to get
the frr-snmp debian packages added to the docker container and the
config bits to enable the snmp module in FRR
This PR brings the functionality of being able to poll bgpd for routes
and peer status.
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
* Set the default mac ageing time to 300 seconds
The current mac ageing was disabled, this could lead the mac address
table to increase over time and lead to resource and performance issues.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update the default HW ageing timer to be 600 seconds.
This is to be on the safer side where ARP update interval
is 300 seconds and SONiC does not flood when ARP is aged out.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update frr to frr-7.0.1
* Fix a typo
* Set right permissions on /etc/frr
* Convert external file links from debian to Azure
* Revert python3 fix
* Build frr using more than 1 job
* Add SWIG as dependency for libswss-common
* Fix showing systemd shutdown sequence when verbose is set
* Fix creation of kernel-cmdline file
Sometimes boot0 prints error
"mv: can't preserve ownership of '/mnt/flash/image-arsonic.xxxx/kernel-cmdline': Operation not permitted"
* Improve flash space usage during installation
Some older systems only have 2GB of flash available. Installing a second
image on these can prove to be challenging.
The new installation process moves the installer swi to memory in order
to avoid free up space from the flash before uncompressing it there.
It removes all the flash space usage spike and also improves the IO
since the installation is no more reading and writting to the flash at
the same time.
* Add support of 7060CX-32S-SSD
* 7260CX3: use inventory powerCycle procedures
* 7050QX-32S: use inventory powerCycle procedures
* 7050QX-32: use inventory powerCycle procedures
* platform: arista: add common platform_reboot
Replace platform_reboot by a link to new common for devices already
using a similar script.
* 7060CX-32S: use inventory powerCycle procedures
* Install python smbus in pmon
Some platform plugin need the python smbus library to perform some actions.
This installs the dependency.
- use superviord to manage process in frr docker
- intro separated configuration mode for frr
- bring quagga configuration template to frr.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [service] Restart SwSS Docker container if orchagent exits unexpectedly
* Configure systemd to stop restarting swss if it attempts to restart more than 3 times in 20 minutes
* Move supervisor-proc-exit-listener script
* [docker-dhcp-relay] Enhance wait_for_intf.sh.j2 to utilize STATEDB
* Ensure dependent services stop/start/restart with SwSS
* Change 'StartLimitInterval' to 'StartLimitIntervalSec', as Stretch installs systemd 232 (>= v230)
* Also update journald.conf options
* Remove 'PartOf' option from unit files
* Add '$(SUPERVISOR_PROC_EXIT_LISTENER_SCRIPT)' to new shared docker-orchagent makefile
* Make supervisor-proc-exit-listener script read from 'critical_processes' file inside container
* Update critical_processes file for swss container
* Base DHCP relay Docker image on Strech base Docker
* Change URL for isc-dhcp source repository
* Upgrade isc-dhcp source branch to 4.3.5-3.1
* Update patch #0001 to apply to isc-dhcp 4.3.5-3.1
* Update patch #0002 to apply to isc-dhcp 4.3.5-3.1
* Update patch #0003 to apply to isc-dhcp 4.3.5-3.1
* Update patch #0004 to apply to isc-dhcp 4.3.5-3.1
* Remove security patches, as they are now applied as part of 4.3.5-3.1 source
* Reorder patches to apply bug fix first, then features
* Extend makefile to build debug Docker image
* Update commit that series file applies against
* Add bridge-utils to orchagent image
- Add vxlanmgrd to supervisorctl in docker -orchagent
Signed-off-by: Ze Gan zegan@microsoft.com
* Update submodule pointer for swss to include Vxlanmgrd changes
Overall goal: Build debug images for every stretch docker.
An earlier PR (#2789) made the first cut, by transforming broadcom/orchagent to build target/docker-orhagent-dbg.gz.
Changes in this PR:
Made docker-orchagent build to be platform independent.
1.1) Created rules/docker_orchagent.mk
1.2) Removed platform//docker-orchagent-*.mk
1.3) Removed the corresponding entry from platform//rules.mk
Extended the debug docker image build to stretch based syncd dockers.
2.1) For now, only mellanox & barefoot are stretch based.
2.2) All the common variable definitions are put in one place platform/template/docker-syncd-base.mk
2.3) platform/[mellanox, bfn]/docker-syncd-[mlnx, bfn].mk are updated as detailed below.
2.3.1) Set platform code and include template base file
2.3.2) Add the dependencies & debug dependencies and any update over what base template offers.
Extended all stretch based non-platform dockers to build debug dockers too.
3.1) Affected are:
docker-database.mk,
docker-platform-monitor.mk,
docker-router-advertiser.mk,
docker-teamd.mk,
docker-telemetry.mk
Next: Build debug flavor of final images with regular dockers replaced with debug dockers where available.
* [dockers]: Upgrade SNMP docker to stretch build
* Removed patch-> 0003-CHANGES-BUG-2743-snmpd-crashes-when-receiving-a-GetN.patch
* update platform-common submodule
* adding PyYAML package to stretch dockerfile
* Installing redis package via pip in stretch dockerfile
* again updating platform-common submodule
* revert back the snmpd version to 5.7.3+dfsg-1.5
* upgrading the snmpd version to 5.7.3+dfsg-1.7+deb9u1 with openssl backport support
* update sonic-snmpagent submodule
* purge libdpkg-perl package in Dockerfile
* revert back the snmpd version to 5.7.3+dfsg-1.5
* minor change in series file
There are some platforms with less powerful CPU/hard-drive could take
longer to get ready for BGP. For these platforms, 240 seconds would be
a safer threshold.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Upgrade database and telemetry docker to stretch build
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Remove SONIC_STRETCH_DEBS list add for redis and telemetry
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* [docker-radvd]: upgrade docker radvd to stretch based
* install jinja>=2.10
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* install pip packages for testing sonic-utilities
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* set storage driver to vfs
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [build]: put stretch debian packages under target/debs/stretch/
* in stretch build phase, all debian packages built in that stage are placed under target/debs/stretch directory.
* for python-based debian packages, since they are really the same for jessie and stretch, they are placed under target/python-debs directory.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* Build a Docker base image based on Debian Stretch
* Build a config-engine Docker image based on Stretch
* Do not install socat from Debian repo
* Add changes that were made to docker-base since this PR was opened
* Add psud daemon to pmon container
* Update submodule sonic-platform-daemons
Submodule update sonic-platform-daemons:
e5d8155 - [sonic-psud] add a new daemon sonic-psud to platform monitor (#20)
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
There are two minor changes in this PR:
* Adjust quagga's jinja template to enable bgp-gr functionality by default. Currently is only applicable to those devices tagged as TOR/T0.
* Ensure that no bgp-notification is sent out to remote-peers during bgpd shutdown events. The goal here is to make sure that remote-peers kick off bgp-gr-helper logic (i.e. retain restarting-router state), which can be only achieved if an ungraceful-shutdown (tcp pipe/socket down) is perceived. There are other approaches to accomplish this goal, such as draft-ietf-idr-bgp-gr-notification, but this one hasn't been implemented yet by Quagga/FRR.
Signed-off-by: Rodny Molina <rmolina@linkedin.com>
* [warmboot] Load database from `redis-cli save`
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Add trivial statement to make bash function valid
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Update submodule sonic-utilities: Use 'redis-cli save' to dump database to file
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Move configdb-load.sh outside docker, and only run in cold
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Fix for more strict warm check
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Restore neighbor table to kernel during system warm-reboot
Added a service: "restore_neighbors" to restore neighbor table into
kernel during system warm reboot. The service is started by supervisord
in swss docker when the docker is started.
In case system warm reboot is enabled, it will try to restore the neighbor
table from appDB into kernel through netlink API calls and update the neighbor
table by sending arp/ns requests to all neighbor entries, then it sets the
stateDB flag for neighsyncd to continue the reconciliation process.
-- Added tcpdump python-scapy debian package into orchagent and vs dockers.
-- Added python module: pyroute2 netifaces into orchagent and vc dockers.
-- Workarounded tcpdump issue in the vs docker
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Move the restore_neighbors.py to sonic-swss submodule
Made changes to makefiles accordingly
Make dockerfile.j2 changes and supervisord config changes
Add python monotonic lib for time access
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Added PYTHON_SWSSCOMMON as swss runtime dependency
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
The default startsecs is 1 second. However, swssconfig.sh will quickly
exit with expected exit code 0 during warm starting. This case should
not be treated as a failure
Remove the teamd.j2 templates used for starting the teamd. Add
teammgrd instead to manage all port channel related configuration
changes. Remove front panel port related configurations in
interfaces.j2 templates as well.
Remove teamd.sh script and use teammgrd to start all the teamd
processes. Remove all the logics in the start.sh script as well.
Update the sonic-swss submodule.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* FRR 4.0 integration with SONiC
-- Uses SONiC FRR repo frr/4.0 (which has SONiC support) to build image
-- Makefile changes to make frr4.0 builtable.
-- Updated/Added FRR configuration files
-- bgpd jinja template fixes
To build SONiC images with FRR4.0, simply edit rules/config file and change
routing stack to following:
SONIC_ROUTING_STACK = frr
and then build images as usual.
* Used integrated-vtysh-config in FRR
Changed to single template: frr.conf.j2 for configuration and added tests
* Adapt to the new WARM_RESTART_TABLE table schema: change from restart_count to restore_count
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update variable and function name to match restore_count name change
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update swss submodule for warm restart schema change
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
When there is HWSKU specific initialization needs to be performed, please
add hwsku-init script under device folder, it will be invoked by swss
before any subsequent initializations.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [docker-orchagent]: Add vrfmgrd to supervisorctl
Signed-off-by: Marian Pritsak <marianp@mellanox.com>
* [sonic-vs]: Add vrfmgrd to supervisorctl
Signed-off-by: Marian Pritsak <marianp@mellanox.com>
* Don't load json conifg like copp, ininip, ports and switch again upon swss warm start
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* double check DB data exists in case only swss warm restart is configured at system reboot
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Double check existence of db data before skipping json load, and format update
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
- Move front panel ports and port channels MTU and IP configurations out of
the current /etc/network/interfaces file and store them in the configuration
database.
- The default MTU value for both front panel ports and the port channels is
9100. They are set via the minigraph or 9100 by default.
- Introduce portmgrd which will pick up the MTU configurations from the
configuration database.
- The updated intfmgrd will pick up IP address changes from the configuration
database.
- Update sonic-swss submodule
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Previously use / to separate container name and program name.
However, in rsyslogd:
Precisely, the programname is terminated by either (whichever occurs first):
end of tag
nonprintable character
‘:’
‘[‘
‘/’
The above definition has been taken from the FreeBSD syslogd sources.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* Fix potential blackholing/looping traffic and refresh ipv6 neighbor to avoid CPU hit
In case ipv6 global addresses were configured on L3 interfaces and used for peering,
and routing protocol was using link-local addresses on the same interfaces as prefered nexthops,
the link-local addresses could be aged out after a while due to no activities towards the link-local
addresses themselves. And when we receive new routes with the link-local nexthops, SONiC won't insert
them to the HW, and thus cause looping or blackholing traffic.
Global ipv6 addresses on L3 interfaces between switches are refreshed by BGP keeplive and other messages.
On server facing side, traffic may hit fowarding plane only, and no refresh for the ipv6 neighbor entries regularly.
This could age-out the linux kernel ipv6 neighbor entries, and HW neighbor table entries could be removed,
and thus traffic going to those neighbors would hit CPU, and cause traffic drop and temperary CPU high load.
Also, if link-local addresses were not learned, we may not get them at all later.
It is intended to fix all above issues.
Changes:
Add ndisc6 package in swss docker and use it for ipv6 ndp ping to update the neighbors' state on Vlan interfaces
Change the default ipv6 neighbor reachable timer to 30mins
Add periodical ipv6 multicast ping to ff02::11 to get/refresh link-local neighbor info.
* Fix review comments:
Add PORTCHANNEL_INTERFACE interface for ipv6 multicast ping
format issue
* Combine regular L3 interface and portchannel interface for looping
* Add ndisc6 package to vs docker
* Added new platform support DellEMC - Z92264f - 64x100
* Includes changes with Makefiles, sfputil, eeprom and default minigraph
* Led support for Z9264f platform
* Includes changes on default minigraph
* ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup
* [docker-platform-monitor] make file and supervisord conf change for new xcvrd deamon
* make file change for the new daemon
* supervisord conf change for the new daemon
signed-off-by Liu Kebo kebol@mellanox.com
* make xcvrd start sequence aligned with the supervisord conf
* update submodules to include xcvrd modification
* Initial commit
* Add Ingrasys S9180-32X platform dirver.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn.service for init barefoot.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Add some functions and fixed some bugs.
1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn script in /etc/init.d/
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn service in debian
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed CPLD switch LED behavior.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed PSU1 and PSU2 EEPROM order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* initial barefoot checkin october 2017
* update refpoint
* update refpoints
* update refpoints to bf-master
* update refpoint
* update refpoint to tested version
* change to platform from asic
* update refpoint for swss
* revert core creation setting
* update refpoints
* add telnet for debug shell
* update refpoints 11/17/17
* missed change in file on previous merge
* [CPLD] Fixed blink LED issue.
* Fixed blink LED mask set error.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Update bf_kdrv.c for 6.0.2.39
* Update bf kernel driver
* Add bf_fun kernel module.
* Update bf_tun for fixed build error
* merge with Azure master (12/12/17)
* update swss refpoint
* update refpoint of swss
* library dependency for stack unroll
* update refpoint to bf-master
* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)
* [DHCP relay]: Fix circuit ID and remote ID bugs
* Set circuit_id_len after setting circuit_id_len to ip->name
* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)
* Add I2C CPLD kernel module for psuutil.
* Support psuutil script.
* Add voltage min and max threshold.
* Update sensors.conf for tmp75.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Allow multi platform support - infra (more changes to follow)
* update relative path to include platform for clarity
* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* change source of files to github (from dropbox), update sairedis refpoint
* update refpoint of sairedis
* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269)
* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)
* update sairedis (fast-boot refpoint)
* fix syncd rpc make files
* update refpoint to handle Makefile change (no functional change)
* [Marvell]: Add support for SLM5401-54x device (#1307)
* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712
* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)
- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files
* update refpoint for Makefile chnage in sairedis
* update refpoint - sairedis
* update sairedis to older refpoint till we debug clean build
* export asic platform for build
* update refpoint for makefiles
* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)
* Upload wnc-osw1800
* Modify for Barefoot suggest
* Revert bfn-platform.mk
* Update bfn-platform-wnc.mk
Update parameter name
* Update parameter name
* initial support for WNC platform
* change switch name to "switch"
* Delete bf modules for rel_7_0
* Add Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Modify bfnsdk for Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Resolved the conflict.
* Resolved the conflict.
* Update submodule path and url.
* Delete unused file.
* Update PSU GPIO and EEPROM for psuutil.
* Add psuutil in S9180-32X
Signed-off-by: Wade He <chihen.he@gmail.com>
* update refpoint
* update refpoint
* change contact email, update refpoint
* cleanup and update kernel modules
* updates based on review
* update refpoint
* update refpoint
* fix typo in config script to check for platforms
* remove stale file
* resolve conflicts
* cleanup diffs with Azure repo and update SDK debs
* update refpoints to Azure
* address review comments
* revert refpoint of swss-common
* porting the build fix from master
* porting build fix from master
* Minor Fix
* Minor fix
* Temp to sde deb packages url
* Update sonic - sairedis,swss & swss-common refpoints
* Update git modules url path to bfn repo
* updated paths for swss, swss-common & sairedis
* Update refpoint for sonic-swss to local bfn repo
* Update URL for downloading sde debian packages
* porting fix links of debian git server from master
* porting fix links of debian git server from master
* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC
* Update ref points for swss, swss-common and sairedis repos
* Add sonic platform scripts for bfn montara/maverick
* Call sh scripts instead of calling py scripts
* Address upstream PR Comments (#10)
* Update bf-master with azure/master
* Undo changes to some files
* Revert "Address upstream PR Comments (#10)"
This reverts commit a7fddb83ca.
* Address upstream comments (#11)
* Remove all non bfn specific changes from upstream PR
* Revert "Address upstream comments (#11)"
This reverts commit 559132103e.
* Undo non bfn changes
* Little more cleanup
* Add back code removed in merge
* export CONFIGURED_PLATFORM
* Update sairedis and swss refpoints
* Address Upstream PR comment
* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64
* Set default tx queue len for usb0 interface to 64
* Update sairedis refpoint
* Update swss ref point
* Add bfn buffer cfg files for montara/maverick as per new design
* Update buffer cfg templates for bfn montara
* add non zero size to buffer profile
* add macro to generate port lists
* Update buffer cfg templates for bfn mavericks
* add non zero size for buffer profiles
* add port generation macro
* Add missing psmisc package
* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.
* Update swss ref point
* Update swss ref point
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update refpoint for sairedis and swss
* sairedis to azure master
* swss to latest bfn bf-master
* Update gitmodules
Update url for sairedis to azure master
* Correct typo in bfn platform script
* Update swss and sairedis ref points
* Update swss ref point
* Address Review comments
* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)
* Fix sairedis refpoint broken in by previous merge
* Remove psmisc from docker base image
* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming
* Address upstream comments
* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms
* Remove autogen ingrasys debian files
* Revert "Remove autogen ingrasys debian files"
* Buffer and qos config template fix for bfn platforms (#21)
SWI-1509 Buffer and qos config template fix for bfn platforms
* Fix qos config files for montara & mavericks (#22)
* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs
* Fix vs test (#23)
* Use MAC from EEPROM for PortChannels
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Use MAC from EEPROM in DEVICE_METADATA
Will affect MAC for VLAN interfaces
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Get MAC via decode-syseeprom
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* hw-management is now a service
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Add error handling for MAC fetch process
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
After commit 832be7b8f4 ("[dockers] Prevent apt-get from installing
suggested and recommended packages by default (#1666)") SONiC fails
to build when FRR is used for routing stack (e.g. SONIC_ROUTING_STACK
is set to frr in rules/config).
To fix issue just replicate changes from docker-fpm-quagga to
docker-fpm-frr to make dependencies installed correctly after above
change to package installing behaviour.
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co>
https://github.com/Azure/azure-kusto-python
azure-kusto-data Package provides the capability to query Kusto clusters with Python.
azure-kusto-ingest Package allows sending data to Kusto service - i.e. ingest data.
The removed package adal is a dependent of the Azure Kusto Library.
The removed azure-storage is deprecated and being replaced with new packages that are
also the dependents of the Azure Kusto Library. (https://github.com/Azure/azure-storage-python)
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* [docker-base] Instruct apt-get to NOT install 'recommended' or 'suggested' packages
* Modify docker-fpm-quagga, docker-snmp-sv2 and docker-sonic-vs Dockerfile templates in order to properly install .deb dependencies
* REDIS_SERVER depends on REDIS_TOOLS; ensure REDIS_TOOLS is always installed before REDIS_SERVER
Due to some ASIC platform limitations, the hash seed range is from 0
to 15. Thus the switch.json.j2 template is updated so that ToRRouter
is using hash seed 0 and LeafRouter is using hash seed 10.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* Revert "[swss]: update swss submodule (#1664)"
This reverts commit c74be37ae0.
* Revert "Remove snmpd hw_fsys module, remove disk monitoring which are not in use (#1663)"
This reverts commit 3d61df9d75.
* We don't need configure anything until we have interfaces created
* Don't run lldpcli for a port, until a port is up and running
* Remove lldpd socket before starting lldpd
* Fix sample files for lldpd configuration
* Another attempt to make the test working
* Quick fix for lldpd paused after start bug
There is a small window in which snmpd might not have registered a
callback for SIGHUP and which will result in its death if
snmpd-config-updater send this signal meant for a config reload.
* Table name separator now determined by database ID, no longer passed manually upon table creation
* Update submodules to include table name separator changes
* SONiC system telemetry Support
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update package name from telemetry to sonic-telemetry
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
Current lldp.conf.j2 template demands the presence of MGMT_INTERFACE attribute in configDB, and by extension, also in config_db.json file. However, MGMT_INTERFACE configuration attribute is optional, so lldp shouldn't bail out if this one isn't provided in configuration.
For this reason, no lldp.conf file is ever created in lldp's container, and lldpd defaults to advertise the mac-address of the connected interface, instead of the interface name.
The fix is to simply relax this jinja2 statement to verify if MGMT_INTERFACE attribute is present.
Just a simple change to make sonic's user life a little bit easier. Displaying the multiple elements of config_db.json in an orderly fashion allows a more intuitive user-experience.
For this change i'm simply intercepting the config-state that is about to be dumped to config_db.json, and i'm placing it in an ordered-dictionary, so that information is pushed to file in natural/alphanumerical ordering.
Example:
admin@lnos-x1-a-csw01:~$ sudo sonic-cfggen -m /etc/sonic/minigraph.xml --print-data
{
...
"PORT": {
"Ethernet0": {
"alias": "Eth1/1",
"lanes": "65"
},
"Ethernet1": {
"alias": "Eth1/2",
"lanes": "66"
},
"Ethernet2": {
"alias": "Eth1/3",
"lanes": "67"
},
"Ethernet3": {
"alias": "Eth1/4",
"lanes": "68"
},
"Ethernet4": {
"alias": "Eth2/1",
"lanes": "69"
},
...
...
"INTERFACE": {
"Ethernet0|10.0.0.0/31": {},
"Ethernet1|10.0.0.2/31": {},
"Ethernet2|10.0.0.4/31": {},
"Ethernet3|10.0.0.6/31": {},
"Ethernet4|10.0.0.8/31": {},
* Add switch ASIC vendor and platforms for Nephos
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* Advance sonic-sairedis submodule to include #271 (Add Nephos ASIC)
* [libteam] Add fallback support for single-member-port LAG
* Allow the port to be selected if the LAG is configured
with fallback and port is in defaulted state due to missing
LACP PDUs from remote end
* Only enable port if LAG is admin up and the member port
is link up
* [team] Add lacp fallback config to teamd.j2 template
* [teamd] Resolve config conflict between fallback and minlink
* Remove min_link config if fallback is configured
* Add support for fallback config in minigraph
* [teamd] Only enable fallback if it is single-member-port LAG
Signed-off-by: Haiyang Zheng <haiyang.z@alibaba-inc.com>
* [teamd] Removing the admin status check in lacp_port_link_update
Will submit another pull request to fix this issue.
Signed-off-by: Haiyang Zheng <haiyang.z@alibaba-inc.com>
* asyncsnmp depends on sonic-utilities so it is possible to import sonic_psu
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Ignore sonic_utilities test during build
* Final code-drop for interface-description and interface-status enhancements.
Here i'm adding minor extensions to support "show interface description" command. Please refer to PR#158 for more details: https://github.com/Azure/sonic-utilities/pull/158
* Add interface-description UT and adjust logic to have 'description' field being optional
RB=
G=lnos-reviewers
R=ntrianta,rjonnadu,rmolina,sfardeen,zxu
A=
* Updating reference to sonic-utilities to collect latest changes
This reverts commit a6edef2fa5.
The reason to revert this commit is that it breaks the current nightly test as
no port channel interfaces are get created after boot. teamd failed to start and
complained about 'Cannot allocate memory' possibly due to nlmsg_alloc function
failure.
Will revert this commit to investigate it further before moving to supervisor.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
This commit adds new code to support PFC and broadcom recommended
MMU setting for PFC feature.
Verified by running checking the hardware setting after the switch
was booted.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
* Add support for vlanconfd and intfconfd
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Change name to vlanmgrd and intfmgrd
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Add missing vlan_members for parse_dpg result
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Remove cfgmgr debug CLI from image
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update swss and swss-common submodules for VLAN trunk support
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* [acl-loader]: acl-loader integration.
acl-loader was inplemented based on translate_acl source code. acl-loader
can't be tested with unittest. Same testcases will be covered with testbed tests.
- Remove translate_acl utility and tests.
- Remove mirror template.
- Do not run ACL rules and mirror configuration generators.
- Adopt minigraph parser to work with acl-loader.
* Update sonic-swss-common and sonic-swss submodules.
Enable ACL dynamic config feature.
* Update sonic-utilities submodule.
Include fix for acl-loader incremental update command.
* [sonic-cfggen]: Add test for everflow cfggen configuration.
Set the ECMP/LAG hash seed to 10 when the switch is a ToR, 20 when the switch
is a Leaf, 0 otherwise.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
The previous implementation only supports EthernetX while X
varies from 0 - 124. Remove such hard coded logics and use
the information from the database instead.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
This field contains all neighbor devices information using the device
hostname as the key and having lo_addr, mgmt_addr, hwsku, type as the
attributes.
Move the file msn27xx.32ports.buffers.json.j2 from sonic-swss repository to
this repository so that we could add unit test for this file.
Unit test is added for platform ACS-MSN2700.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
