The behavior could be that we are sending LLDP message but not using
lldpcli configured properties if netlink delete messages were lost.
It also could be that some interfaces do not sending messages at all.
"lldpcli show statistics" could see duplicated or missing interfaces.
Changes:
Upgrade lldpd to 0.9.6 (which introduced the adjustable netlink buffer size)
Change the netlink receive buffer size to 1MB
* Moving get_routing_stack() to a centralized location to avoid code duplication
Various areas of sonic-utilities are now demanding this functionality so i'm simply moving this routing to a centralized location. After spending some time debating about the ideal location for this function, we thought about sonic-config-engine/sonic_platform.py as the closest match.
Functional tests' output will be provided as part of the equivalent PR to be submitted shortly within sonic-utilities repo.
* Adding comment to function.
* [docker-platform-monitor] make file and supervisord conf change for new xcvrd deamon
* make file change for the new daemon
* supervisord conf change for the new daemon
signed-off-by Liu Kebo kebol@mellanox.com
* make xcvrd start sequence aligned with the supervisord conf
* update submodules to include xcvrd modification
* Fix for bash's memory-leak
Memory leak is observed during the execution of scripts that make use of bash-arrays. In scenarios where the offending script is executed on a regular basis (e.g. fancontrol), the leaking process may end up consuming most of the system resources.
In this PR i'm replacing bash in all the contexts where it executes (both host and dockers). The official patch for this issue is here: https://ftp.gnu.org/gnu/bash/bash-4.3-patches/bash43-040
* Fixing minor issue during code-merge
Signed-off-by: Rodny Molina <rmolina@linkedin.com>
- Include delta DPS1900 support
- Make kernel build to fail on any error
- Enable downloading pre-built kernel debian packages
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Initial commit
* Add Ingrasys S9180-32X platform dirver.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn.service for init barefoot.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Add some functions and fixed some bugs.
1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn script in /etc/init.d/
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn service in debian
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed CPLD switch LED behavior.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed PSU1 and PSU2 EEPROM order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* initial barefoot checkin october 2017
* update refpoint
* update refpoints
* update refpoints to bf-master
* update refpoint
* update refpoint to tested version
* change to platform from asic
* update refpoint for swss
* revert core creation setting
* update refpoints
* add telnet for debug shell
* update refpoints 11/17/17
* missed change in file on previous merge
* [CPLD] Fixed blink LED issue.
* Fixed blink LED mask set error.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Update bf_kdrv.c for 6.0.2.39
* Update bf kernel driver
* Add bf_fun kernel module.
* Update bf_tun for fixed build error
* merge with Azure master (12/12/17)
* update swss refpoint
* update refpoint of swss
* library dependency for stack unroll
* update refpoint to bf-master
* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)
* [DHCP relay]: Fix circuit ID and remote ID bugs
* Set circuit_id_len after setting circuit_id_len to ip->name
* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)
* Add I2C CPLD kernel module for psuutil.
* Support psuutil script.
* Add voltage min and max threshold.
* Update sensors.conf for tmp75.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Allow multi platform support - infra (more changes to follow)
* update relative path to include platform for clarity
* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* change source of files to github (from dropbox), update sairedis refpoint
* update refpoint of sairedis
* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269)
* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)
* update sairedis (fast-boot refpoint)
* fix syncd rpc make files
* update refpoint to handle Makefile change (no functional change)
* [Marvell]: Add support for SLM5401-54x device (#1307)
* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712
* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)
- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files
* update refpoint for Makefile chnage in sairedis
* update refpoint - sairedis
* update sairedis to older refpoint till we debug clean build
* export asic platform for build
* update refpoint for makefiles
* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)
* Upload wnc-osw1800
* Modify for Barefoot suggest
* Revert bfn-platform.mk
* Update bfn-platform-wnc.mk
Update parameter name
* Update parameter name
* initial support for WNC platform
* change switch name to "switch"
* Delete bf modules for rel_7_0
* Add Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Modify bfnsdk for Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Resolved the conflict.
* Resolved the conflict.
* Update submodule path and url.
* Delete unused file.
* Update PSU GPIO and EEPROM for psuutil.
* Add psuutil in S9180-32X
Signed-off-by: Wade He <chihen.he@gmail.com>
* update refpoint
* update refpoint
* change contact email, update refpoint
* cleanup and update kernel modules
* updates based on review
* update refpoint
* update refpoint
* fix typo in config script to check for platforms
* remove stale file
* resolve conflicts
* cleanup diffs with Azure repo and update SDK debs
* update refpoints to Azure
* address review comments
* revert refpoint of swss-common
* porting the build fix from master
* porting build fix from master
* Minor Fix
* Minor fix
* Temp to sde deb packages url
* Update sonic - sairedis,swss & swss-common refpoints
* Update git modules url path to bfn repo
* updated paths for swss, swss-common & sairedis
* Update refpoint for sonic-swss to local bfn repo
* Update URL for downloading sde debian packages
* porting fix links of debian git server from master
* porting fix links of debian git server from master
* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC
* Update ref points for swss, swss-common and sairedis repos
* Add sonic platform scripts for bfn montara/maverick
* Call sh scripts instead of calling py scripts
* Address upstream PR Comments (#10)
* Update bf-master with azure/master
* Undo changes to some files
* Revert "Address upstream PR Comments (#10)"
This reverts commit a7fddb83ca.
* Address upstream comments (#11)
* Remove all non bfn specific changes from upstream PR
* Revert "Address upstream comments (#11)"
This reverts commit 559132103e.
* Undo non bfn changes
* Little more cleanup
* Add back code removed in merge
* export CONFIGURED_PLATFORM
* Update sairedis and swss refpoints
* Address Upstream PR comment
* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64
* Set default tx queue len for usb0 interface to 64
* Update sairedis refpoint
* Update swss ref point
* Add bfn buffer cfg files for montara/maverick as per new design
* Update buffer cfg templates for bfn montara
* add non zero size to buffer profile
* add macro to generate port lists
* Update buffer cfg templates for bfn mavericks
* add non zero size for buffer profiles
* add port generation macro
* Add missing psmisc package
* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.
* Update swss ref point
* Update swss ref point
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update refpoint for sairedis and swss
* sairedis to azure master
* swss to latest bfn bf-master
* Update gitmodules
Update url for sairedis to azure master
* Correct typo in bfn platform script
* Update swss and sairedis ref points
* Update swss ref point
* Address Review comments
* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)
* Fix sairedis refpoint broken in by previous merge
* Remove psmisc from docker base image
* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming
* Address upstream comments
* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms
* Remove autogen ingrasys debian files
* Revert "Remove autogen ingrasys debian files"
* Buffer and qos config template fix for bfn platforms (#21)
SWI-1509 Buffer and qos config template fix for bfn platforms
* Fix qos config files for montara & mavericks (#22)
* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs
* Fix vs test (#23)
* Use MAC from EEPROM for PortChannels
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Use MAC from EEPROM in DEVICE_METADATA
Will affect MAC for VLAN interfaces
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Get MAC via decode-syseeprom
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* hw-management is now a service
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* Add error handling for MAC fetch process
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
* First part of skipping not used port for qos configuration
* Use active ports only to set QoS parameters for 6100
* Add a test for qos.json.j2
* Add a test for Dell S6100 buffers.json template
* Update submodulre
* Fix minigraph parser issue when handling LAG related ACL table configuration
* rephrase the warning message.
* pick up swss change in https://github.com/Azure/sonic-swss/pull/494
* Add noise config for PortChannel & EthernetInterface in simple-sample-graph.xml
* Add noise config for PORTCHANNEL_INTERFACE in simple-sample-graph.xml
Signed-off-by: Wenda <wenni@microsoft.com>
* Add noice config for DEVICE_NEIGHBOR in t0-sample-graph.xml
Add unit test against introducing ports not existing in port_config.ini
into DEVICE_NEIGHBOR
Signed-off-by: Wenda <wenni@microsoft.com>
* DeviceInterfaceLink in minigraph.xml can contain port not existing in
port_config.ini but contraining non-zero Bandwidth attribute
Add noice config in simple-sample-graph.xml to capture the case that
such a port is leaked into config_db.json
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL_INTERFACE from portchannels containing ports not
existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect DEVICE_NEIGHBOR from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Add noise config Ethernet1 in DeviceInterfaceLinks in simple-sample-graph.xml as it is in PortChannel1001
Signed-off-by: Wenda <wenni@microsoft.com>
* Add noise config Ethernet1 in DeviceInterfaceLinks in simple-sample-graph.xml as it is in PortChannel1001
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect PORTCHANNEL_INTERFACE from portchannels containing ports not
existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Protect DEVICE_NEIGHBOR from ports not existing in port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Correct space in minigraph.py
Signed-off-by: Wenda <wenni@microsoft.com>
* Does not allow non-port_config.ini port to get into the port list
Signed-off-by: Wenda <wenni@microsoft.com>
* Check PORTCHANNEL against PORT list only if port_config_file exists
Signed-off-by: Wenda <wenni@microsoft.com>
* Correct format
Signed-off-by: Wenda <wenni@microsoft.com>
* print warning when a port coming from DeviceInterfaceLink is not in
port_config.ini
Signed-off-by: Wenda <wenni@microsoft.com>
* Change Ethernet1 and 2 to fortyGigE0/1 and 2,respectively
Signed-off-by: Wenda <wenni@microsoft.com>
* Change Ethernet1 and 2 to fortyGigE0/1 and 2,respectively
Signed-off-by: Wenda <wenni@microsoft.com>
* print warning when ignoring ports, portchannels, portchannel interfaces, and
device neighbors
Update t0-sample-graph.xml with interface name 'fortyGigE0/2' and the
ACL_TABLE output
Signed-off-by: Wenda <wenni@microsoft.com>
* Fix minigraph parser issue when handling LAG related ACL table configuration
Changes to be committed:
modified: src/sonic-config-engine/minigraph.py
modified: src/sonic-config-engine/tests/test_cfggen.py
signed-off-by kebol@mellanox.com
[acl-loader]: Change the header from Rule ID to Table (#250)
[acl-loader]: Add --table_name option to update full operation (#249)
[generate_dump]: fix a saidump file copy bug (#248)
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* We don't need configure anything until we have interfaces created
* Don't run lldpcli for a port, until a port is up and running
* Remove lldpd socket before starting lldpd
* Fix sample files for lldpd configuration
* Another attempt to make the test working
* Quick fix for lldpd paused after start bug
[counters]:separate query of port/queue counters
[buffermgr]: remove the item from consumer queue if invalid
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [test] Adding Broadcom configuration file test
In order to allow SONiC community to check in Broadcom configuration
file directly under device folder. We need to add this test to make
sure the contents of the configuration is compliant with Broadcom
specifications.
* Invoke test from Debian package builder
* Use $() syntax
* Remove the debug echo statement
* Fix tcpdmatch dependency
Issue: sonic_debian_extension.j2 uses tcpdmatch from src folder
which is result of libwrap build
Fix: added tcpd.deb to build results and extract required files
from build results
* Install libwrap0 and tcpd deb packages
* Table name separator now determined by database ID, no longer passed manually upon table creation
* Update submodules to include table name separator changes
* SONiC system telemetry Support
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update package name from telemetry to sonic-telemetry
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* [device/dell] Added dynamic sai.profile generation
This commit addds new code for generating dynamic sai.profile file.
The sai.profile.j2 will generate the sai.profile dynamically based on
the topology. It will generate the sai.profile under /etc/sai.d/ directory
in syncd. Before syncd is started this J2 file will be run from the start.sh
file from /usr/bin/ directory. Since the sai.profile is dynamically generated
the old sai.profile file is not required so deleted the file for S6100.
It also address couple of more changes for port_config.ini support is added
for speed in the file which can be used later to find the port speed. Also
the buffer_default_t*.j2 file the ports should be from 0 to 64 changed.
Unit tested the code on S6100 for dynamic generation of sai.profile file for
both T0 and T1 and the file was created in /etc/sai.d/sai.profile
Similarly tested the sonic binary on S6000 to make sure that the sai.profile is
copied from the /usr/share/sonic/hwsku/sai.profile to /etc/sai.d/sai.profile.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
* [sonic-buildimage] Updating module sai-redis
Updating the sonic-sairedis point.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
Just a simple change to make sonic's user life a little bit easier. Displaying the multiple elements of config_db.json in an orderly fashion allows a more intuitive user-experience.
For this change i'm simply intercepting the config-state that is about to be dumped to config_db.json, and i'm placing it in an ordered-dictionary, so that information is pushed to file in natural/alphanumerical ordering.
Example:
admin@lnos-x1-a-csw01:~$ sudo sonic-cfggen -m /etc/sonic/minigraph.xml --print-data
{
...
"PORT": {
"Ethernet0": {
"alias": "Eth1/1",
"lanes": "65"
},
"Ethernet1": {
"alias": "Eth1/2",
"lanes": "66"
},
"Ethernet2": {
"alias": "Eth1/3",
"lanes": "67"
},
"Ethernet3": {
"alias": "Eth1/4",
"lanes": "68"
},
"Ethernet4": {
"alias": "Eth2/1",
"lanes": "69"
},
...
...
"INTERFACE": {
"Ethernet0|10.0.0.0/31": {},
"Ethernet1|10.0.0.2/31": {},
"Ethernet2|10.0.0.4/31": {},
"Ethernet3|10.0.0.6/31": {},
"Ethernet4|10.0.0.8/31": {},
* [sonic build] Define folder macro for target folder /usr/sonic/share/templates
* [sonic-cfggen] allow templates to include from common folders
- Allow templates to include files under /usr/share/sonic/templates
- Allow templates to include files in the same folder as the root template
* [Buffer config] install the buffer configuration template
* [Arista7260cx3] Add buffer configuration for Arista7260CX3 T0 topology
- pg profile look up table is incomplete. Currently contains T0 default
values.
* [Arista7260cx3] Adding QoS configuration
* Address review comments
1. Stop generating ingress pg configuration for lossless pgs.
2. Stop putting ports into speed sets, put all ports in one set.
3. Remove ingress lossless profiles.
4. Added some tailing '-' back to remove leading spaces.
- Adds the following changes:
- [schema] Update Config DB Table name #defines (#188)
- Extending IpAddress class with method to return the scope of any
given ip-address (#187)
- Extending IpPrefix class to return the subnet associated to any
given prefix (#184)
- update build instruction (#185)
* [device] Add a new platform ly1200 for MiTAC
Signed-off-by: Eddy Weng <eddy.weng@mic.com.tw>
* [platform/broadcom/sonic-platform-modules-mitac] Update dependency for new kernel.
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* [minigraph]: Set hostname in all default minigraphs to 'sonic'
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* [kernel]: update linux kernel to support ly1200 of MiTAC
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* [platform/broadcom/sonic-platform-modules-mitac] adapt PSU driver for linux kernel upgrade.
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* Resolve the conflict with Quanta
modified files are as below.
.gitmodules
platform/broadcom/one-image.mk
platform/broadcom/rules.mk
Signed-off-by: Stane Shieh <stane.shieh@mic.com.tw>
* Upgrade linux-image version
* Add missing dependency of igb
* Fix mft build rule
* Add missing dependency of ixgbe
* [Broadcom]: Update OpenNSL modules to be compatible with kernel 3.16.0-5 (#3)
* [Nephos] Update SDK version to support new kernel module 3.16.0-5 (#4)
* [mellanox]: Update URL for SDK (#5)
* Add patch to prevent 'supervisorctl start' command from hanging if system time has rolled backward
* Also add unit tests for clock rollback scenarios
* Fix build of libsaithrift for broadcom
* Restore libsaithrift-dev building
* Comment out libsaithrift library on cavium and marvell. Both of them have old SAI drivers
* Revert back unintentional acton changes
* Don't run the package checks when building sairedis package
This reverts commit 64602ad5b2.
Reverting this commit because the root cause of the issue was due to
a Broadcom SDK bug which caused VLAN-tagged packets to be tagged twice.
When packets were double-tagged, only one tag was getting stripped before
the packet was trapped to the CPU. However, the second tag was left behind,
which would cause the DHCP relay agent to ignore the packet. The bug has
since been fixed, so now all VLAN-tagged packets should properly have their
tag removed before being trapped to the CPU. Therefore the DHCP relay
agent should never encounter a VLAN-tagged packet.
* Add switch ASIC vendor and platforms for Nephos
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* Advance sonic-sairedis submodule to include #271 (Add Nephos ASIC)
* [libteam] Add fallback support for single-member-port LAG
* Allow the port to be selected if the LAG is configured
with fallback and port is in defaulted state due to missing
LACP PDUs from remote end
* Only enable port if LAG is admin up and the member port
is link up
* [team] Add lacp fallback config to teamd.j2 template
* [teamd] Resolve config conflict between fallback and minlink
* Remove min_link config if fallback is configured
* Add support for fallback config in minigraph
* [teamd] Only enable fallback if it is single-member-port LAG
Signed-off-by: Haiyang Zheng <haiyang.z@alibaba-inc.com>
* [teamd] Removing the admin status check in lacp_port_link_update
Will submit another pull request to fix this issue.
Signed-off-by: Haiyang Zheng <haiyang.z@alibaba-inc.com>
* [DHCP relay]: Fix bug which could cause incorrect interface name association
* Add patches to series file and apply using stgit
* Update .gitignore in order to ignore downloaded and generated files
* Reorganize src/ subdirectories alphabetically in .gitignore
* asyncsnmp depends on sonic-utilities so it is possible to import sonic_psu
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
* Ignore sonic_utilities test during build
* [TACACS+]: Add support for TACACS+ Authentication
* pam_tacplus - A TACACS+ protocol client library and PAM module to
supports core TACACS+ functions for AAA.
* nss_tacplus - A NSS plugin for TACACS+ to extend function getpwnam,
make the TACACS+ authenticated user which is not found in local
could login successfully.
* Add make rules for pam_tacplus and install script
* Add a patch for pam_tacplus to disable pam-auth-update pam-tacplus
by default
* Add a patch for pam_tacplus to inlucde and build nss_tacplus
Signed-off-by: chenchen.qcc@alibaba-inc.com
* [TACACS+]: Add nss-tacplus as a separate src repo
* Separate nss-tacplus from pam-tacplus, modify tacacs.mk and
makefile, add a patch to adapt to the new user map profile.
* Use the lastest stable version for pam-tacplus, add a dependent
package in sonic-salve, add two patches to fix build error.
* Add scripts to disable tacplus by default.
* Remove hostcfgd service file
Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>
* [TACACS+]: Fix nss-tacplus filter some valid TACACS+ username
* The NAME_REGEX for username check in plugin nss-tacplus is
the ANSI version "^[0-9a-zA-Z_-\ ]*$", but the regular expression
in /etc/adduser.conf is not defined as ANSI version. To avoid
nss-tacplus filter some valid TACACS+ username, remove username
check.
Signed-off-by: Chenchen Qi <chenchen.qcc@alibaba-inc.com>
* Final code-drop for interface-description and interface-status enhancements.
Here i'm adding minor extensions to support "show interface description" command. Please refer to PR#158 for more details: https://github.com/Azure/sonic-utilities/pull/158
* Add interface-description UT and adjust logic to have 'description' field being optional
RB=
G=lnos-reviewers
R=ntrianta,rjonnadu,rmolina,sfardeen,zxu
A=
* Updating reference to sonic-utilities to collect latest changes
sairedis:
[syncd]: Only query queue counters that are needed by the application
swss:
[pfcwdorch]: Set correct polling interval for pfcWdOrch object
[portsorch]: Only add stat IDs that are needed to query
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
It contains:
[pfcactionhandler]: match correct value when aclhandler creates ACL rules (#393)
[orchagent]: Fix issue with bind ACL table group to port (#386)
[vlanmgrd]: Use sonic-swss-common instead of exec redis-cli (#392)
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
- Found a bug in v4.3.1-6 in which dhcrelay would not start if
passed an interface name with a length of 15 characters due
to truncated copy of interface name in common/lpf.c.
Bug was fixed in v4.3.2.
- v4.3.3-6 is the newest version we can build for Debian Jessie, as all
newer versions require newer versions of debhelper and
libbind-export-dev dependencies than are available for Jessie.
This reverts commit a6edef2fa5.
The reason to revert this commit is that it breaks the current nightly test as
no port channel interfaces are get created after boot. teamd failed to start and
complained about 'Cannot allocate memory' possibly due to nlmsg_alloc function
failure.
Will revert this commit to investigate it further before moving to supervisor.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* [vs]: add zebra/quagga/fpmsyncd in supervisord.conf
* setup the hostname for vs docker
* do not save to the disk for redis db
* install ipaddress module in vs docker
* update sonic-sairedis submodule
* [init]: save the initial switch mac to config db
Save the initial switch mac to config db DEVICE_METADATA|localhost entry.
* update sonic-swss submodule
* Add support for vlanconfd and intfconfd
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Change name to vlanmgrd and intfmgrd
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Add missing vlan_members for parse_dpg result
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Remove cfgmgr debug CLI from image
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* Update swss and swss-common submodules for VLAN trunk support
Signed-off-by: Jipan Yang <jipan.yang@alibaba-inc.com>
* [acl-loader]: acl-loader integration.
acl-loader was inplemented based on translate_acl source code. acl-loader
can't be tested with unittest. Same testcases will be covered with testbed tests.
- Remove translate_acl utility and tests.
- Remove mirror template.
- Do not run ACL rules and mirror configuration generators.
- Adopt minigraph parser to work with acl-loader.
* Update sonic-swss-common and sonic-swss submodules.
Enable ACL dynamic config feature.
* Update sonic-utilities submodule.
Include fix for acl-loader incremental update command.
* [sonic-cfggen]: Add test for everflow cfggen configuration.
Including:
- [swss] a couple non-functional code cleanup changes
- [bufferorch] move buffer pool definitions together
- [orchagent] optimize the code structure
- [orchagent]: Fix hang problem caused by erase operation on empty map
- [orchagent]: Support port/LAG in multiple VLANs
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Move port_config.ini related parsing code out of minigraph.py and create an independent portconfig.py.
Add support to multiple optional fields according to Porting Guide
This field contains all neighbor devices information using the device
hostname as the key and having lo_addr, mgmt_addr, hwsku, type as the
attributes.
Move the file msn27xx.32ports.buffers.json.j2 from sonic-swss repository to
this repository so that we could add unit test for this file.
Unit test is added for platform ACS-MSN2700.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Including this commit:
[port_util]: Return empty dictionary instead of a NoneType in get_bridge_port_map
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* RR client support in minigraph for FRR
* Fix python warning from previous rrclient commit and move config handling to a more relevant place for this cmd
* Add config support for nhopself, keepalive and holdtime timers.
* Add route-map to prefer global nexthops for ebgp learned prefixes.
* [DHCP Relay]: Support new <DhcpRelays> minigraph tag; support multiple VLANs
* Don't start dhcrelay in quiet mode so as to get startup output in syslog
* Update sonic-cfggen tests to support new '<DhcpRelays>' tag
* <DhcpRelays> tag is only present for VLANs which require a DHCP relay agent -- only parse if present
* Don't attempt to configure a DHCP relay agent for VLANs without specified DHCP servers
* Modify to work with Taoyu's minigraph/DB changes (#942)
* Reduce number of DHCP servers in sonic-cfggen unit tests from 4 to 2
* Remove isc-dhcp-relay sample output file from sonic-cfggen test, as we no longer generate that file
* Update Option 82 isc-dhcp-relay patch to load all interface name-alias maps into memory once at start instead of calling sonic-cfggen on each packet we relay
* Remove executable permission from Jinja2 template
* Set max hop count to 1 so that DHCP relay will only relay packets with a hop count of zero
* Replace tabs with spaces
* Modify overlooked sonic-cfggen call, use Config DB instead of minigraph
* Also ensure > 1 VLAN requires a DHCP relay agent before outputting to template
* Generate port name-alias map file using sonic-cfggen and parse that in lieu of parsing port_config.ini directly
* No longer drop packets with hop count > 0; Instead, drop packets which already contain agent info
* [build]: sonic-utilities package now depends on swsssdk; add build dependency
* Now building sonic-utilities Python package in wheel format
* Update sonic-utilities submodule
* Change output wheel name to match proper format
The current DEVICE_NEIGHBOR format doesn't support multiple different
ports connecting with same neighbor. Thus the lldpd.conf file is not
generated correctly, causing missing information for LAG members.
This fix reverts the data structure in the previous version of
minigraph parser - using local port as the key and remote port/device
as the value of the map. Sample format is:
DEVICE_NEIGHBOR['Ethernet124'] = {
'name': 'ARISTA04T1',
'port': 'Ethernet1/1'
}
The corresponding unit test in test_cfggen is updated.
Add one more unit test for lldpd.conf.j2 verification.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Use ipv4_loopback_addresses variable to store all IPv4 loopback addresses.
The source IP for encapsulation is chosen from one of the addresses.
The destination IPs for decapsulation is the list of the addresses.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Modify minigraph parser output format so it fit DB schema
Modify configuration templates to fit new schema
Systemd services dependencies are modified so database starts before any configuration consumer
* [core dump] pass unix time to coredump-compress script
Currently we only have program name (e.g. bgpd) and PID in the core file
name. PID could collide especially after docker restart or recreate.
Passing the unix time to coredump-compress so it could also add time to
the core file name.
* [utilities] include the change to coredump_compress script
* [quagga] enable core dump for bgpd and zebra
bgpd and zebra downgrade their privilege shortly after started. For that
sysctrl kernel.suid_dumpable needs to be set to 2, so that they can dump
core.
Note that fs.suid_dumpable SHOULD NOT be set to 1. Which will bypass all
system security.
- Force log rotation at size thresholds only (no longer also rotating logs daily), allowing for more consistent archived log size
- Eliminate remaining duplicate log messages
- Cron facility now only logs to cron.log (was also logging to syslog)
- Debug, mail, news and user log facilities only log to syslog; no longer creating separate log files for these facilities
- Cron job that calls logrotate every minute now uses the main /etc/logrotate.conf file so as to check/rotate all logs every minute, not just the logs specified in the rsyslog file. Also redirecting output of this command to /dev/null to prevent "(CRON) info (No MTA installed, discarding output)" messages in cron.log due to lack of a mail service
- Delete archive files based on remaining /var/log partition space. Note that this solution currently requires a minimum /var/log partition size of 32MB to function correctly
- Update sonic-sairedis and sonic-swss submodules to incorporate recording file name changes
- Add .screen file to .gitignore (unrelated)
* [cfggen] Support reading from and writing to configdb
* [bgp] Move bgp_admin_state to configdb, support dynamic admin state change
* [sonic-utilities] Adapt configDB for admin status, support config save and config load
* [config]: Add SONIC_CONFIG_MAKE_JOBS
This config option allows user to specify -j value that will be passed
to each package build.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
In Jinja2, '|' cannot be treated directly as piping operator. The
operator precedence of '|' is higher than '*'. The filter only applies
to the value just before it. Group the expression to make sure that the
filter is applied to the outcome of the expression.
Update the unit test to add such case.
* Add docker-dhcp-relay/Dockerfile to .gitignore
* Add isc-dhcp-relay .deb package to image build process, along with my Option 82 patch
* Install custom isc-dhcp-relay in dhcp_relay docker
* Install isc-dhcp-relay build dependencies in sonic-slave Docker container
* Copy the built .deb package to the destination directory
* Add dependencies for isc-dhcp-relay
* Change Option 82 string to '<hostname>:<portname>'
* Install dependencies of .deb files implicitly in Dockerfile
* Remove unused line
* Remove unnecessary space
In orchagent, the TCP_FLAGS expects both value and mask as the input.
Right now, translate_acl tool only support one TCP flag and generate
the ACL with both value and mask equal to the flag. This rule will
match packets that have this specific flag set regardless of the other
flags.
* [docker-teamd]: Explicitly set LAG hwaddr
Team device is initially created without any members and has a random HW
address, which is later changed to port's address. This configuration
sets team device's address explicitly to base MAC to avoid reassignment.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Update teamd config tests with hwaddr
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Align HW addr byte for Centec and Mellanox
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Change HW addr to unicast in config tests
Signed-off-by: marian-pritsak <marianp@mellanox.com>
- [swss]: Update sairedis/swss/common submodules
- [orchagent]: Mount /var/log folder and use the folder to save recording files
- [orchagent]: Use -d to specify the folder path
- This PR allows supervisord to log syncd exit events to syslog
- Syncd dockers now are built from docker-config-engine instead of docker-base
- Supervisord in all syncd dockers now call syncd_start.s which is installed by sonic-sairedis repo
