Why I did it
Add two platform that support s3IP framework
How I did it
Add two platforms supporting S3IP SYSFS (TCS8400, TCS9400)
How to verify it
Manual test
Co-authored-by: tianshangfei <31125751+tianshangfei@users.noreply.github.com>
Why I did it
Added support for the device Z9432F
How I did it
Implemented the support for the platform Z9432F
Switch Vendor: DellEMC
Switch SKU: Z9432F-ON
ASIC Vendor: Broadcom
SONiC Image: sonic-broadcom.bin
Why I did it
add celestica belgite platform
How I did it
add belgite platform in celestica
Co-authored-by: nicwu-cel <nicwu@celestica.com>
Co-authored-by: anjian <anjian@celestica.com>
Co-authored-by: sandycelestica <sandyli@celestica.com>
Signed-off-by: pettershao-ragilenetworks pettershao@ragilenetworks.com
What I did it
Add new platform x86_64-ragile_ra-b6510-32c-r0 (Trident 3)
ASIC Vendor: Broadcom
Switch ASIC: Trident 3
Port Config: 32x100G
Add new platform x86_64-ragile_ra-b6920-4s-r0 (Tomahawk 3)
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk 3
Port Config: 128x100G
-How I did it
Provide device and platform related files.
-How to verify it
show platform fan
show platform ssdhealth
show platform psustatus
show platform summary
show platform syseeprom
show platform temperature
show interface status
Why I did it
Added Support for Dell EMC S5212f platform
How I did it
Implemented the support for Dell EMC S5212f platform
Platform: x86_64-dellemc_s5212f_c3538-r0
HwSKU: DellEMC-S5212f-P-25G
ASIC: broadcom
ASIC Count: 1
How to verify it
Verified the show command outputs
Why I did it
Added Support for Alphanetworks SNJ60D0-320F platform
How I did it
Implemented the support for Alphanetworks SNJ60D0-320F platform
Platform: x86_64-alphanetworks_snj60d0_320f-r0
HwSKU: Alphanetworks-SNJ60D0-320F
ASIC: broadcom
ASIC Count: 1
How to verify it
Verified the show command outputs
Why I did it
Added support for the device S5224F
How I did it
Implemented the support for the platform S5224F
Switch Vendor: DellEMC
Switch SKU: S5224F-ON
ASIC Vendor: Broadcom
SONiC Image: sonic-broadcom.bin
How to verify it
Verified the show platform/interface commands
Why I did it
Added support for the device N3248PXE
How I did it
Implemented the support for the platform N3248PXE
n3248pxe_unit_test_log.txt
Switch Vendor: DellEMC
* Switch SKU: N3248PXE
* ASIC Vendor: Broadcom
* SONiC Image: sonic-broadcom.bin
How to verify it
Verified the show platform commands
Why I did it
Added support for the device N3248TE
How I did it
Implemented the support for the platform N3248TE
Switch Vendor: DellEMC
Switch SKU: N3248TE
ASIC Vendor: Broadcom
SONiC Image: sonic-broadcom.bin
How to verify it
Verified the show platform commands
What I did it
Add new platform x86_64-ragile_ra-b6910-64c-r0 (Tomahawk 3)
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk 3
Port Config: 64x100G
-How I did it
Provide device and platform related files.
-How to verify it
show platform fan
show platform ssdhealth
show platform psustatus
show platform summary
show platform syseeprom
show platform temperature
show interface status
Why I did it
Support Nokia ixr7250E IMM and Supervisor cards
How I did it
Added modules x86_64-nokia_ixr7250e_sup-r0 and x86_64-nokia_ixr7250e_36x400g-r0 ../device/nokia directory.
Modified the platform/broadcom/one-image.mk to include NOKIA_IXR7250_PLATFORM_MODULE
Modified the platform/broadcom/rule.mk to include the platform-module-nokia.mk
#### Why I did it
- To build flashrom properly with dependency tracking.
#### How I did it
- Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
- At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
- Currently flashrom builds only for Dell S6100 platforms.
Introduce new sonic-buildimage images for Broadcom DNX ASIC family.
sonic-broadcom-dnx.bin
sonic-aboot-broadcom-dnx.swi
How I did it
NO CHANGE to existing make commands
make init; make configure PLATFORM=broadcom; make target/sonic-aboot-broadcom.swi; make target/sonic-broadcom.bin
The difference now is that it will result in new broadcom images for DNX asic family as well.
sonic-broadcom.bin, sonic-broadcom-dnx.bin
sonic-aboot-broadcom.swi, sonic-aboot-broadcom-dnx.swi
Note: This PR also adds support for Broadcom SAI 5.0 (based on 1.8 SAI ) for DNX based platform + changes in platform x86_64-arista_7280cr3_32p4 bcm config files and platform_env.conf files
Add device and platform code for ix7-bwde, ix8a-bwde.
Support platform API 2.0 for all quanta platforms except for ix1b
Co-authored-by: robert.hong <robert.hong@qct.io>
Add support for Accton as9726-32d platform
This pull request is based on as9716-32d, so I reference as9716-32d to create new model: as9726-32d.
This module do not need led driver to control led, FPGA can handle it.
I also implement API2.0(sonic_platform) for this model, CPLD driver, PSU driver, Fan driver to control these HW behavior.
This change introduces PDDF which is described here: https://github.com/Azure/SONiC/pull/536
Most of the platform bring up effort goes in developing the platform device drivers, SONiC platform APIs and validating them. Typically each platform vendor writes their own drivers and platform APIs which is very tailor made to that platform. This involves writing code, building, installing it on the target platform devices and testing. Many of the details of the platform are hard coded into these drivers, from the HW spec. They go through this cycle repetitively till everything works fine, and is validated before upstreaming the code.
PDDF aims to make this platform driver and platform APIs development process much simpler by providing a data driven development framework. This is enabled by:
JSON descriptor files for platform data
Generic data-driven drivers for various devices
Generic SONiC platform APIs
Vendor specific extensions for customisation and extensibility
Signed-off-by: Fuzail Khan <fuzail.khan@broadcom.com>
* [platform]: Add a new supported platform, Delta-agc032
Switch Vendor: Delta
Switch SKU: Delta-agc032
CPU: BROADWELL-DE
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk3, BCM56980
Port Configuration: 32x400G + 2x10G
- What I did
Add a new Delta platform Delta-agc032.
- How I did it
Add files by following SONiC Porting Guide.
- How to verify it
1. decode-syseeprom
2. sensors
3. psuutil
4. sfputil
5. show interface status
6. bcmcmd
Signed-off-by: zoe-kuan <ZOE.KUAN@deltaww.com>
This is a 1RU switch with 32 QSFP28 (40G/100G) ports on
Broadcom Tomahawk I chipset. CPU used in QFX5200-32C-S
is Intel Ivy Bridge. The machine has Redundant and
hot-swappable Power Supply (1+1) and also has Redundant
and hot swappable fans (5).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
Signed-off-by: Ashish Bhensdadia <bashish@juniper.net>
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports
on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is
Intel Broadwell-DE. The machine has Redundant and hot-swappable
Power Supply (1+1) and also has Redundant and hot swappable fans (3+1).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
This switch has 27 fiber ports, 4x25G, 20x10G , and 3x100G ports ports.
CPU: Intel ® Atom™ Processor C3508,1.6GHz
BMC: None
MAC: Broadcom BCM88470 (Qumran AX).
MISC: Support IEEE1588v2, hot-swappable PSU, hot-swappable fan tray.
But notice here, BCM88470 is not supported for SAI now.
So the syncd container is not running so far.
Signed-off-by: roy_lee <roy_lee@accton.com>
Add platform support for delta ag9032v2a
CPU: Broadwell-DE
ASIC: BMC56870 with <100Gx32 + 10Gx1>
BMC: AST2520:
- What I did
add the new platform of delta ag9032v2a
- How I did it
1.provide the QSFP and SWPLD attributes and create the virtual buses of I2C
2. provide the port configuration
- How to verify it
1. psuutil.py
2. sfputil.py
3. bcmcd
- Known issue
The port LED is not ready. We noticed that BCM chip had the M0 FW initialization issue while bringing up SDK with "BRCM SAI ver: [3.5.2.3], OCP SAI ver: [1.4], SDK ver: [6.5.14]" and here is the information :
root@sonic:/home/admin# bcmcmd "M0 status"
M0 status
0:soc_iproc_data_send_wait: No response for msg 2
M0 FW is NOT Running
M0 FW Version is 0.0
Host FW Version is 1.0
Host and M0 FW Versions do not match!!!
Signed-off-by: hans-tseng <hans.tseng@deltaww.com>
- What I did
Move the enabling of Systemd services from sonic_debian_extension to a new systemd generator
- How I did it
Create a new systemd generator to manually create symlinks to enable systemd services
Add rules/Makefile to build generator
Add services to be enabled to /etc/sonic/generated_services.conf to be read by the generator at boot time
Signed-off-by: Lawrence Lee <t-lale@microsoft.com>
* Add driver and util for peripherals of as7312-54xs, most are copied from as7312-54s.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Add default port speed and index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Update i2c addr of psus.
Add system logging for monitor.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Correct syntax of module_dirs.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Validate sfputil after tested.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Correct the index of eeprom mapping.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Switch Vendor: DellEMC
* Switch SKU: s5232F
* ASIC Vendor: Broadcom
* Swich ASIC: Trident3
* Port Configuration: 32x100G
* SONiC Image: sonic-broadcom.bin
* LED support for s5232f
* Changes Include ipmitool implementation for platform_sensors script is inclued in pmon startup
* Added 100G,25G,10G configruation ( 100G is default).
* Updated Makefile infrastructure to build debug images.
As a sample, platform/broadcom/docker-orchagent-brcm.mk is updated to add a docker-orchagent-brcm-dbg.gz target.
Now "BLDENV=stretch make target/docker-orchagent-brcm-dbg.gz" will build the debug image.
NOTE: If you don't specify NOSTRETcH=1, it implicitly calls "make stretch", which builds all stretch targets and that would include debug dockers too.
This debug image can be used in any linux box to inspect core file. If your module's external dependency can be suitably mocked, you my even manually run it inside.
"docker run -it --entrypoint=/bin/bash e47a8fb8ed38"
You may map the core file path to this docker run.
* Dropped the regular binary using DBG_PACKAGES and a small name change to help readability.
* Tweaked the changes to retain the existing behavior w.r.t INSTALL_DEBUG_TOOLS=y.
When this change ('building debug docker image transparently') is extended to all dockers, this flag would become redundant. Yet, there can be some test based use cases that rely on this flag.
Until after all the dockers gets their debug images by default and we switch all use cases of this flag to use the newly built debug images, we need to maintain the existing behavior.
* 1) slave.mk - Dropped unused Docker build args
2) Debug template builder: renamed build_dbg_j2.sh to build_debug_docker_j2.sh
3) Dropped insignifcant statement CMD from debug Docker file, as base docker has Entrypoint.
* Reverted some changes, per review comments.
"User, uid, guid, frr-uid & frr-guid" are required for all docker images, with exception of debug images.
* Get in sync with the new update that filters out dockers to be built (SONIC_STRETCH_DOCKERS_FOR_INSTALLERS) and build debug-dockers only for those to be built and debug target is available.
* Mkae a template for each target that can be shared by all platforms.
Where needed a platform entry can override the template.
This avoids duplication, hence easier to maintain.
* A small change, that can fit better with other targets too.
Just take the platform code and do the rest in template.
* Extended debug to all stretch based docker images
* 1) Combined all orchagent makefiles into one platform independent make under rules/docker-orchagent.mk
2) Extened debug image to all stretch dockers
* Changes per review comments:
1) Dropped LIBSAIREDIS_DBG from database, teamd, router-advertiser, telemetry, and platform-monitor docker*.mk files from _DBG_DEPENDS list
2) W.r.t docker make for syncd, moved DEPENDS from template to specific makefile and let the template has stuff that is applicable to all.
* 1) Corrected a copy/paste mistake
* Fixed a copy/paste bug
* The base syncd dockers follow a template, which defines the base docker as DOCKER_SYNCD_BASE instead of DOCKER_SYNCD_<platform code>. Fix the docker-syncd-<mlnx, bfn>.mk to use the new one.
[Yet to be tested locally]
* Fixed spelling mistake
* Enable build of dbg-sonic-broadcom.bin, which uses dbg-dockers in place of regular dockers, for dockers that build debug version. For dockers that do not build debug version, it uses the regular docker.
This debug bin is installable and usable in a DUT, just like a regular bin.
* Per review comments:
1) Share a single rule for final image for normal & debug flavors (e.g. sonic-broadcom.bin & sonic-broadcom-dbg.bin)
2) Put dbg as suffix in final image name.
3) Compared target/sonic-broadcom.bin.logs with & w/o fix to verify integrity of sonic-broadcom.bin
4) Compared target/sonic-broadcom.bin.logs with sonic-broadcom-dbg.bin.log for verification
This fix takes care of ONIE image only. The next PR will cover the rest.
The next PR, will also make debug image conditional with flag.
* Updated per comments.
Now that debug dockers are available, do not need a way to install debug symbols in regular dockers.
With this commit, when INSTALL_DEBUG_TOOLS=y is set, it builds debug dockers (for dockers that enable debug build) and the final image uses debug dockers. For dockers that do not enable debug build, regular dockers get used in the final image.
Note:
The debug dockers are explicitly named as <docker name>-dbg.gz. But there is no "-dbg" suffix for image.
Hence if you make two runs with and w/o INSTALL_DEBUG_TOOLS=y, you have complete set of regular dockers + debug dockers. But the image gets overwritten.
Hence if both regular & debug images are needed, make two runs, as one with INSTALL_DEBUG_TOOLS=y and one w/o. Make sure to copy/rename the final image, before making the second run.
These patches add support for the Broadcom XMC card (XLR/GTS). At this moment
only Tomahawk switch (BCM956960K) is supported. Add
device/broadcom/x86_64-bcm_xlr-r0 and
platform/broadcom/sonic-platform-modules-brcm-xlr-gts files
* Add new device accton_as5812_54x.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Rename 5812's config.bcm.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Change fan module to support lm-sensors.
Validate for thermal policy.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Add bask reset and lpmode control of 6 QSFP ports.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Get currect duty of fan for comparing. Instead of by stored duty from previous iteration.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Roll back the mistakes to update mellanox submodules.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Rollback for misoperation on submodule platform/p4/SAI-P4-BM.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Change indexes of ports to start from 1, as them on the front panel.
Add low-power mode control of the transciever's eeprom, follows SFF-8436.
Signed-off-by: roy_lee <roy_lee@accton.com>
[devices] add new accton platform minipack.
Add support for new platform, minipack.
It has
CPU: Broadwell DE – D1527
MAC: Tomahawk3(BCM56980).
PHY:Broadcom BCM81724, 4 pcs, Gearbox for PIM-16Q
BMC:AST2520
8 hot-swappable Port-Interface-Modules, each of them has 16*100G QSFP.
- What I did
Add device and platform files for minipack.
- How I did it
Add as SONiC Porting Guide.
- How to verify it
decode-syseeprom
sensors
psuutil
sfputil
thermal monitor
bcmsh on port status
(port LEDs may not working)
