**- Why I did it**
In thermalctd, when speed of fan exceeds threshold, the fan status will be saved as "bad". So in system health, it is better to check fan speed before fan status. In this case, if fan speed exceeds threshold, we get more detailed information.
**- How I did it**
Move fan speed check logic before fan status check
**- How to verify it**
Manual test
This update includes the following changes
> [syncd armhf] Fix syncd crash when running community test suites (#777)
> Revert "[tests]:Add unittest for MACsec on p2p establishment (#771)"
> [tests]:Add unittest for MACsec on p2p establishment (#771)
> [tests] Enable azure pipeline make check to respect unittests (#760)
* c2fb282 2021-01-29 | [ecnconfig] Allow ecn unit test to run without sudo (#1390) [Neetha John]
* 6cc635b 2021-01-29 | [sonic-installer] Add information to syslog (#1369) [Dmytro]
* 7a8024a 2021-01-27 | Prevent user from adding more then a single untagged VLAN to an interface (#1382) [Eran Dahan]
* 41e62c6 2021-01-26 | [pcieutil] Add 'pcie-aer' sub-command to display AER stats (#1169) [Arun Saravanan Balachandran]
* 47f412b 2021-01-26 | Improve robustness of consutil plugin loading (#1353) [Samuel Angebault]
* 64aa1b8 2021-01-25 | [show] Fix warnings, related to gearbox, while show commands execution (#1343) [maksymbelei95]
* ff226d0 2021-01-25 | Prevent configuring IP interface on a port which is a member of VLAN (#1374) [Eran Dahan]
* f1522b9 2021-01-21 | [config_mgmt.py]: Set leaf-list to empty list while port breakout. (#1268) [Praveen Chaudhary]
* 99c05d5 2021-01-21 | add vlan_intf_object only if there are ipv4 or ipv6 mappings (#1377) [Sumukha Tumkur Vani]
* b082684 2021-01-21 | [ecn] Add tests for ecnconfig command (#1372) [Neetha John]
* 23e0920 2021-01-21 | [sfpshow] Enhance QSFP-DD DOM information (#1207) [shlomibitton]
* f4edba1 2021-01-20 | [ecnconfig] handle backend port names when extracting port I/F ID from the port name (#1361) [Mahesh Maddikayala]
Signed-off-by: Danny Allen <daall@microsoft.com>
- Why I did it
Initially, we used Monit to monitor critical processes in each container. If one of critical processes was not running
or crashed due to some reasons, then Monit will write an alerting message into syslog periodically. If we add a new process
in a container, the corresponding Monti configuration file will also need to update. It is a little hard for maintenance.
Currently we employed event listener of Supervisod to do this monitoring. Since processes in each container are managed by
Supervisord, we can only focus on the logic of monitoring.
- How I did it
We borrowed the event listener of Supervisord to monitor critical processes in containers. The event listener will take
following steps if it was notified one of critical processes exited unexpectedly:
The event listener will first check whether the auto-restart mechanism was enabled for this container or not. If auto-restart mechanism was enabled, event listener will kill the Supervisord process, which should cause the container to exit and subsequently get restarted.
If auto-restart mechanism was not enabled for this contianer, the event listener will enter a loop which will first sleep 1 minute and then check whether the process is running. If yes, the event listener exits. If no, an alerting message will be written into syslog.
- How to verify it
First, we need checked whether the auto-restart mechanism of a container was enabled or not by running the command show feature status. If enabled, one critical process should be selected and killed manually, then we need check whether the container will be restarted or not.
Second, we can disable the auto-restart mechanism if it was enabled at step 1 by running the commnad sudo config feature autorestart <container_name> disabled. Then one critical process should be selected and killed. After that, we will see the alerting message which will appear in the syslog every 1 minute.
- Which release branch to backport (provide reason below if selected)
201811
201911
[x ] 202006
* Fix exception in bgpmon caused by duplicate keys
It is possible that BGP neighbors in IPv4 and IPv6 address families
share the same name (such as bgp monitor). However, such case is not
handled in bgpmon, and an Exception will be raised. This commit will
address the issue by Using set instead of list to avoid duplicate keys.
Recent changes brought l2 vlan concept which do not have DHCP
clients behind them and so DHCP relay is not required. Also,
dhcpmon fails to launch on those vlans as their interfaces
lack IP addresses. This PR limit launch of both DHCP relay
and dhcpmon to L3 vlans only.
singed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
- Support for non-template based FRR configurations (BGP, route-map, OSPF, static route..etc) using config DB schema.
- Support for save & restore - Jinja template based config-DB data read and apply to FRR during startup
**- How I did it**
- add frrcfgd service
- when frr_mgmg_framework_config is set, frrcfgd starts in bgp container
- when user changed the BGP or other related table entries in config DB, frrcfgd will run corresponding VTYSH commands to program on FRR.
- add jinja template to generate FRR config file to be used by FRR daemons while bgp container restarted
**- How to verify it**
1. Add/delete data on config DB and then run VTYSH "show running-config" command to check if FRR configuration changed.
1. Restart bgp container and check if generated FRR config file is correct and run VTYSH "show running-config" command to check if FRR configuration is consistent with attributes in config DB
Co-authored-by: Zhenhong Zhao <zhenhong.zhao@dell.com>
**- Why I did it**
For now `hwsku.json` and `platform.json` dont support optional fields. For example no way to add `fec` or `autoneg` field using `platform.json` and `hwsku.json`.
**- How I did it**
Added parsing of optional fields from hwsku.json.
**- How to verify it**
Add optional field to `hwsku.json`. After first boot will be generated new `config_db.json` or you can generate it using `sonic-cfggen` command. In this file must be optional field from `hwsku.json` or check using command `redis-cli hgetall PORT_TABLE:Ethernet0`
Example of `hwsku.json`, that must be parsed:
```
{
"interfaces": {
"Ethernet0": {
"default_brkout_mode": "1x100G[40G]",
"fec": "rs",
"autoneg": "0"
},
...
}
```
Example of generated `config_db.json`:
```
"PORT": {
"Ethernet0": {
"alias": "Ethernet0",
"lanes": "0,1,2,3",
"speed": "100000",
"index": "1",
"admin_status": "up",
"fec": "rs",
"autoneg": "0",
"mtu": "9100"
},
```
So, we can see this entries in redis db:
```
admin@sonic:~$ redis-cli hgetall PORT_TABLE:Ethernet0
1) "alias"
2) "Ethernet0"
3) "lanes"
4) "0,1,2,3"
5) "speed"
6) "100000"
7) "index"
8) "1"
9) "admin_status"
10) "up"
11) "fec"
12) "rs"
13) "autoneg"
14) "0"
15) "mtu"
16) "9100"
17) "description"
18) ""
19) "oper_status"
20) "up"
```
Also its way to fix `show interface status`, `FEC` field but also need add `FEC` field to `hwsku.json`.
Before:
```
admin@sonic:~$ show interfaces status
Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC
----------- --------------- ------- ----- ----- ----------- ------ ------ ------- --------------- ----------
Ethernet0 0,1,2,3 100G 9100 N/A Ethernet0 routed up up QSFP28 or later N/A
```
After:
```
admin@sonic:~$ show interfaces status
Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC
----------- --------------- ------- ----- ----- ----------- ------ ------ ------- --------------- ----------
Ethernet0 0,1,2,3 100G 9100 rs Ethernet0 routed up up QSFP28 or later N/A
```
**- Why I did it**
Prior to SONiC using Debian Buster, we needed to build Python 3.5 or newer from source for installation in the SNMP container, becuase it wasn't available from the Debian repository for Jessie or Stretch. Now that all containers are based on Buster, we simply install Python 3.7 from the Debian repository in the host as well as all containers. We are no longer building Python 3 from source, so the Makefile is unused and we no longer need to install build dependencies in the slave containers.
**- How I did it**
- Remove Python 3 makefile
- No longer install Python 3 build dependencies in the slave containers.
Submodule changes to be committed:
* src/sonic-platform-daemons 81318f7...e72f6cd (3):
> [ledd] Minor refactor; add unit tests (#143)
> [thermalctld] Report unit test coverage (#141)
> [psud] Increase unit test coverage (#140)
Meet the requirement for the MUX_CABLE table that IPv6 loopbacks have a /128 prefix
Note that this change only affects the MUX_CABLE table, all other tables continue to use the loopback address provided in minigraph.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Changes in this update:
37695c8 [show]: Use TCP Connection For Muxcable Commands (#1371)
8119ba2 Validations checks while creating and deleting a Portchannel (#1326)
3df267e [config] Fix Breakout mode option and BREAKOUT_CFG table check method (#1270)
9bd709b [show] Fix show arp in case with FDB entries, linked to default VLAN (#1357)
bc2d27e [generate_dump]: fix syntax error
signed-of-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Currently FRR is send Prefix with VNI information to FPMSYNCD. This PR allows FRR to send RMAC with EVPN Type5 prefix to fpmsyncd. This is a temp fix. This patch will be removed once neighorch is ready to handle the Prefix and ARP (containing RMAC) separately.
[ci]: download artifacts from master branch (#768)
Do not create fabric port if mapping is not available (#769)
[syncd] Comparison logic log also current attr value on set operation (#763)
Add fabric port test to vslib (#737)
[ci]: use sonicbld pool (#766)
[tests] Remove exit command blocking all tests to run (#765)
[vslib]: adapt macsec sai 1.7.1 (#755)
Add support for SAI_SWITCH_ATTR_AVAILABLE_IPMC_ENTRY needed by CRM (#756)
Signed-off-by: Danny Allen <daall@microsoft.com>
Avoid sonic-cfggen crashing when a server does not have a configured loopback address in the minigraph
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Update sonic-linux-kernel pointer to pick up new commits:
- Backport patches to increase critical threshold for ASIC and validate transceiver temperature a7c1af7c44edde90dff49d672071139043bcdb65 548e8e0be4
- [ci]: Set up CI with Azure Pipelines 548e8e0be49692050ea4071d5e9945816bc5aacc a7c1af7c44
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* Fix py3 version changed even version control enabled issue
* Add some comments and simplify the script
* Add the comment to explain how to get the not hooked command
Server IPv4 loopbacks do not always arrive with /32 prefix, which is a requirement for the MUX_CABLE table in config DB
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Fix#119
when parallel build is enable, multiple dpkg-buildpackage
instances are running at the same time. /var/lib/dpkg is shared
by all instances and the /var/lib/dpkg/updates could be corrupted
and cause the build failure.
the fix is to use overlay fs to mount separate /var/lib/dpkg
for each dpkg-buildpackage instance so that they are not affecting
each other.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
To make the peer switch hostname easily accessible from config DB. Add peer_switch field to DEVICE_METADATA table
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
* Use 20 and 30 route-map entries instead of 2 and 3 for TSA
* Added support for dynamic "Allow list" default action.
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
Pass universal_newlines=True parameter to subprocess.Popen(); no longer use .encode('utf-8') on resulting stdout.
This was missed in #5886
Note: I would prefer to use text=True instead of universal_newlines=True, as the former is an alias only available in Python 3 and is more understandable than the latter. However, Even though the setup.py file for this package only specifies Python 3, the LGTM tool finds other Python 2 code in the repo and validates the code as Python 2 code and alerts that text=True is an invalid parameter. Will stick with universal_newlines=True for now. Once all Python code in the repo has been converted to Python 3, I will change all universal_newlines=True to text=True.
src/sonic-platform-common 9935fca...8664efc (2):
Make sonic_sfp Python2 and Python3 compatible (#157)
[sffbase.py] Fix to make Python 3-compatible (#156)
src/sonic-platform-daemons e6c786b...81318f7 (1):
[psud] Fix issue where PSU Fan info is not updated in State DB (#137)
Fixes#6341
To incldue following changes:
- [ci]: add build for arm64 and armhf (#757)
- Use template hgetall, because we will tune the return types of library functions (#759)
- [syncd] Fix bulk multi attrs for same key db update (#761)
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
- Why I did it - Reboot cause prints "Non-Hardware (N/A)" instead of showing the software reboot cause.
The issue is mishandling of hardware reboot cause in determine-reboot-cause script.
- How I did it
Fixed the handling for Non Hardware reboot cause. Ignore if Non-Hardware is present in the hardware_reboot_cause output. Added some code refactoring for simplicity.
- How to verify it - With fix, the hardware reboot cause is ignored (if it is non hw):
The details are as follows:
1. 0010-Ported-fix-for-length-exceeded-from-lldp-community.patch
Patch taken from 78243478dc
lib: remove limit on system description length
The limit was introduced in 9c49ced while fixing a memory leak.
The state data is used to ensure we don't interleave operations. We
need to handle the case where the value is truncated because it is
larger than the allocated size.
Fix issue https://github.com/lldpd/lldpd/issues/408
2. 0011-fix-med-location-len.patch
Patch taken from 5c3479463a
lib: fix LLDP-MED location parsing in liblldpctl
Some bounds were not checked correctly when parsing LLDP-MED civic
location fields. This triggers out-of-bound reads (no write) in
lldpcli, ultimately leading to a crash.
Fix https://github.com/lldpd/lldpd/pull/420
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
In the emulated armhf environment, the function readdir()returns NULL on a ext4 file system directory. When running the libyang1 test cases, it will require to load the plugins from the files (such as metadata.so), because the readdir() is failing, the plugins can’t be loaded in the emulated armhf environment, so it causes libyang1 test error. This error is a combination of the following reasons.
• Emulation of a 32-bit target from a 64-bit host –> qemu from x86_64 to armhf
• Glibc version > 2.27 – Debian buster is using glibc 2.28
- How I did it
Enabled large file support by setting _FILE_OFFSET_BITS=64 for libyang1.
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
Including commits in sonic-swss-common repo:
b423b9c Add support for hexists call (#432) [Tony Titus]
0982996 Remove extension of tableNameSeparatorMap (#430) [Qi Luo]
d16cc76 [build]: add azure pipeline build badge (#429) [lguohan]
f2aaf55 Set up CI with Azure Pipelines (#428) [lguohan]
What: Modify unit test to not call any platform dependent api in test_find_hardware_reboot_cause.
- Why I did it
MELLANOX build is failing for the recent PRs. The errors are due to platform library being invoked in a unit test for determine-reboot-cause script.
Verified by running unit tests and a successful Mellanox build.
Co-authored-by: Vaibhav Hemant Dixit <vadixit@microsoft.com>
Why I did it
To support FG_ECMP scenarios
- How I did it
Modified minigraph parser to parse ECMP fields in the case they are present in minigraph
- How to verify it
Loaded ensuing config_db file on a DUT to verify the fields are parsed and configure device correctly
Mellanox already supports multiple destination IPs in IPinIP tunnel configuration, thus removing mellanox
exception for IPinIP configuration.
- How I did it
Removed "dst_ip" field generation in mellanox platform condition.
Sorted the "dst_ip" list, so that it is easier to test against sample configuration in unit tests.
Aligned unit test sample.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
frr does not advertise route if local route is not reachable, as a result
loopback route /64 is not advertised to the neighbors. Add static route
allows frr to advertise the route to its peers
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Introduce tunnel manager daemon. Start the process as part of swss container
Submodule update for swss:
9ed3026 - 2020-12-24 : [NAT] ACL Rule with DO_NOT_NAT action is getting failed. (#1502) [Akhilesh Samineni]
c39a4b1 - 2020-12-23 : Mux/IPTunnel orchagent changes (#1497) [Prince Sunny]
bc8df0e - 2020-12-23 : Add support for headroom pool watermark (#1567) [Neetha John]
Changes:
-- Add Default value for leaf-lists in ACL and portchannel.
-- Remove members in VLAN.
-- Test modifications.
Signed-off-by: Praveen Chaudhary<pchaudhary@linkedin.com>
* src/sonic-swss c7ee75f...cadf28f (24):
> Revert "Add support for headroom pool watermark (#1453)"
> [VxlanOrch] pytest for EVPN VXLAN (#1318)
> [restore_neighbors] python3 support for restore_neighbors.py (#1542)
> [buffermgmt] more build error fixes when compiling for armhf (32-bit) (#1559)
> Sflow fix to avoid NULL in field. (#1531)
> [fgnhgorch] Fg Nhg link handling (#1537)
> [dpb]: make sure port is in admin down state before remove port. (#1513)
> [FPMSYNCD/FDBSYNCD] EVPN Type-5 route removing prefix-len for host route and removing junk character present in the mac (#1553)
> Added support for EVPN L3 VXLAN as described in the PR Azure/SONiC#437 (#1267)
> [crm]: Typecast to unit64_t to avoid divide by 0 during overflow (#1550)
> [vxlanmgr] Fix build error when compiling for armhf (32-bit) (#1552)
> [Dynamic buffer calc] Support dynamic buffer calculation (#1338)
> [dvs] Clean-up dvs_database and dvs_common (#1541)
> [VxlanMgr] changes for EVPN VXLAN (#1266)
> Statistics support for Tx and Rx counters of different frame sizes (#1536)
> [orchagent/phy]: Add firmware info propagation (#1540)
> [vxlanorch] Use PRI instead of %l to avoid warnings in 32-bit arch (#1539)
> [FDBSYNCD] Added support for EVPN as described in the PR Azure/SONiC#437 (#1276)
> [everflow] Add retry mechanism for mirror sessions and policers (#1486)
> Enable ACL table type mirror_v6 for Innovium Platform (#1527)
> [fgnhgorch] Change format specifier %lu to %zu for size_t (#1529)
> [dvs] Fix issue where concurrent netns operations cause test setup to fail (#1535)
> Add support for headroom pool watermark (#1453)
> Change gAsicInstance to type string with max length limit (#1526)
importlib-resources v4.0.0 was released today (2020-12-23) and drops support for Python 2. This caused the sonic-config-engine Python 2 wheel build to fail.
Reference: https://pypi.org/project/importlib-resources/
Pin 'importlib-resources' package to v3.3.1 for Python 2
Unrelated: remove pinned version of zipp for sonic-bgpcfgd because we no longer build a Python 2 version of that package
* First cut image update for kubernetes support.
With this,
1) dockers dhcp_relay, lldp, pmon, radv, snmp, telemetry are enabled
for kube management
init_cfg.json configure set_owner as kube for these
2) Each docker's start.sh updated to call container_startup.py to register going up
As part of this call, it registers the current owner as local/kube and its version
The images are built with its version ingrained into image during build
3) Update all docker's bash script to call 'container start/stop/wait' instead of 'docker start/stop/wait'.
For all locally managed containers, it calls docker commands, hence no change for locally managed.
4) Introduced a new ctrmgrd service, that helps with transition between owners as kube & local and carry over any labels update from STATE-DB to API server
5) hostcfgd updated to handle owner change
6) Reboot scripts are updatd to tag kube running images as local, so upon reboot they run the same image.
7) Added kube_commands.py to handle all updates with Kubernetes API serrver -- dedicated for k8s interaction only.
- Why I did it
Latest master image crashes when loading minigraph
Fixing #6265
- How I did it
Avoid converting 'None' to ipaddress.
- How to verify it
On a system crashing with the issue, manually patch minigraph.py with the change in PR and load minigraph succeeded.
Signed-off-by: Ying Xie ying.xie@microsoft.com
Added source interface support for NTP.
Also made NTP start on Mgmt-VRF by default when configured.
**- How I did it**
1) Updated hostcfg to listen to global config NTP and NTP_SERVER tables and restart ntp when ever the configuration changes. NTP table includes source interface configuration.
2) The ntp script updated to by default start on Mgmt-VFT when configured.
Signed-off-by: Prabhu Sreenivasan <prabhu.sreenivasan@broadcom>
* [Mellanox] Update SAI to 1.18.0
* [Mellanox] Update SDK to 4.4.2112
* Updated Mellanox SAI to 1.18.0.2
* Updated bcmsai debians to use SAI 1.7.1
* Updated Mellanox to use SAI 1.7.1
* Updated submodule sonic-sairedis using SAI 1.7.1
Co-authored-by: Vineet Mittal <vmittalmittal@microsoft.com>
Co-authored-by: Nazarii Hnydyn <nazariig@nvidia.com>
[vs] Add workaround for clean up macsec ports (#752)
[logfile]: Add handling of Sairedis rec filename (#747)
Update README.md
[meta] Fix stat_mode enums to sai_bulk_op_error_mode_t (#753)
[syncd][tests] Add syncd deprecated attribute value test (#751)
[vs] Skip MACsec clean up if /sbin/ip is not accessible (#750)
Configure enable -Wcast-align=strict when supported by compiler (#749)
[syncd] Translate depreacated attr enum values to new ones (#746)
[sairedis]vs SAI support for voq neighbor (#725)
[syncd] Translate removed RIDs in fdb notification (#734)
[syncd] Move syncd classes to syncd namespace (#742)
[vs] Use /sbin/ip absolute path for ip command in MACsecManager (#744)
[saidiscovery] Update saidiscovery to use VendorSai object and metadata (#736)
Remove Winline warning since it depends on external headers (#741)
[meta] Enable strict cast-align warning (#738)
[vs] Use meta class instead info when using unittests (#740)
[vs] Support flush entry type all on virtual switch (#735)
[vslib]: Add MACsec state to state base (#722)
[README.md] Update installation steps (#730)
Switch Capability support (#728)
[vs] Fail switch create when warm boot requested and no warm boot state (#739)
Dynamic Port breakout fix the crash, port down event processing after<80> (#727)
Code clean (#721)
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
- Why I did it
In some build machine, it may be not able to run as root during the build, only has root authority in docker containers.
- How I did it
Remove the sudo in Makefile
- How to verify it
cd src/sonic-build-hooks
make all
- Why I did it
The change is done to make sure the system initialization is done before updating the feature states
- How I did it
use the command "systemctl is-system-running --wait" to wait till system has finished booting up before updating the feature states
Commits include:
- 9935fca5 Fixed eeprom_tlvinfo.py to make it Python2/Python3 compatible (#155)
- 7e23e63 [y_cable] Skip ImportError in y_cable.py (#154)
Refactor determine-reboot cause code. Fix errors seen during determine-reboot-cause when sonic_platform package is not installed.
Add error handling for healthd service when sonic_platform package is not installed.
Tested on KVM where sonic_platform is not present, and the errors are not seen anymore in syslog.
This PR updates the following commits in master for
sonic-platform-daemons
b0be7ca [xcvrd] add unit test infrastructure and unit tests for xcvrd (#133)
8555077 [xcvrd] removing the delete notification message logic for command probe in mux cable driver (#134)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* Parse device type from <ElementType> first in <PngDec>
* Fall back to <Device> type attribute if no <ElementType> is found
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
- Why I did it
The sai.profile file in kvm images overrides the warmboot file with path /var/cache/sai_warmboot.bin. Since the directory /var/cache is not mounted in syncd, it will be cleared in an image upgrade, the warm-reboot image upgrade will fail if the file is put in the directory.
Fix#6183
- How I did it
Remove the path that overrides the default path. The warmboot file path will then be the default value /var/warmboot/sai-warmboot.bin. Since /var/warmboot/ is mounted by /host/warmboot/ in the host, it could survive an image upgrade.
- How to verify it
Tested warm reboot upgrading kvm image locally.
[dhcp-relay]: Prevent Buffer Overrun Of Malformed DHCP Packet
The add/strip relay agent options does not take into account the buffer
length and so it is possible to overrun the buffer. The issue will
result in contents from previous packet being added to the current one.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
- Why I did it
Advance swss submodule to pick up latest changes.
- How I did it
Including folowing changes:
[portsorch] adjust port initialized event back to notice (#1532)
Signed-off-by: Ying Xie ying.xie@microsoft.com
* Introduced a list console_device_types which contains the device types that support console management feature
* Inject CONSOLE_SWITCH:console_mgmt table with enabled:yes or enabled:no
Signed-off-by: Jing Kan jika@microsoft.com
* src/sonic-platform-daemons 73e6ddd...4da0bfc (3):
> Align style with PEP8 standards (#128)
> Support python3 for xcvrd, psud, thermalctld and syseepromd (#132)
> Import mock psu object for testing LED (#119)
This update brings in the following commits.
86c1108 Enable arm architecture to build in addition to amd64 (#37)
4acb2c3 fix bugs and enhance Transformer (#35)
49e5a22 ygot related enhancements and fixes (#34)
51224de Fix ietf yang search path for cvl schema builds (#32)
3c6cdb3 CVL Changes #8: 'must' and 'when' expression evaluation (#31)
dabf231 CVL Changes #7: 'leafref' evaluation (#28)
6f9535f CVL Changes #6: Customized Xpath Engine integration (#27)
5e2466b DB-Layer fixes/enhancements (#26)
9a27302 CVL Changes #4: Implementation of new CVL APIs (#22)
dbf1093 Translib support for authorization, yang versioning and Delete flag (#21)
80f369e CVL Changes #5: YParser enhancement (#23)
904ce18 CVL Changes #3: Multi-db instance support (#20)
9d24a34 CVL Changes #2: YValidator infra changes for evaluating xpath expression (#19)
f3fc40f CVL Changes #1: Initial CVL code reorganization and common infra changes (#18)
4922601 Bulk and RPC API support in translib (#16)
1d730df RFC7895 yang module library implementation (#15)
Update sonic-platform-common submodule:
* Make eeprom_tlvinfo.py Python3 compatible
**- Why I did it**
To get the latest changes which fix some python2 -> python3 migration errors.
[dataset] Add dataset "system uptime" into non-db client. (#52)
Adding new data set to query Sonic OS version. (#50)
[gnmi_server] Disregard EOF status for STREAM subs (#48)
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
[sairedis] Advance sairedis pointer to support cmd zmq flag
[meta] Use memcpy instead of cast to prevent strict-aliasing error (#723)
[vslib]Add MACsec forward and filters to HostInterfaceInfo (#719)
[vslib] Add StateBase function for MACsec (#717)
Add support for default zmq synchronous mode flag (#711)
[syncd] Code clean (#720)
[sairedis] Remove custom bulk fdb methods (#710)
[vslib]Add MACsec Filters (#713)
[vslib]Add MACsec Forwarder (#714)
[vslib]Add MACsec Manager (#715)
Add helper functions, findObjects and dumpObject (#716)
Code clean refactor (#712)
[vslib] Fix CorePortIndexMap log line (#708)
[meta] Use custom hash in SaiObjectCollection (#709)
Fix LGTM localtime function warnings (#707)
[vs] VoQ Switch objects initialization - Local Port OID mapping to System Ports (#703)
Code style refactor (#705)
[vs] Initialization of VOQ switch objects (#702)
[vs] SAI support for VOQ switches - Switch State Initialization (#701)
Add MACsec meta methods (#704)
[vs] SAI support for VOQ switches (#698)
[vs] SAI support for VOQ switches - Core Port Index Map File parser (#700)
[vs] SAI support for VoQ switch - Core Port Index Map Container (#699)
[syncd][sairedis] Change pub/sub model to push/pull in zmq notification (#695)
[syncd] Use lua script to update db when using bulk api (#690)
[syncd] Fix bulk api object type for next hop group members (#685)
Add FlexCounter for MACsec SA (#684)
- Kdump configurations stored and manipulated in ConfigDB are now processed
by hostcfgd and applied asynchronously
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
This PR updates the submodule sonic-platform-common, sonic-platform-daemons
For sonic-platform-common update following commits are added
a8823a3 [sonic_y_cable] add check_mux_direction api for y_cable (#151)
7c0301d Modular Chassis - APIs for midplane monitoring (#148)
6f7d8a0 Fix some LGTM alerts; Add LGTM badges to README.md (#146)
for sonic-platform-daemons update following commits are added
73e6ddd [xcvrd] replace check_active_linked_tor_side api to check_mux_direction (#131)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
swss:
- [port_rates][rif_rates] Fix port_rates.lua (#1520)
- Improve the way of handling BUFFER_PG during PFC storm (#1480)
- [Orchagent] Vxlanorch and Portsorch changes for EVPN VXLAN (#1264)
- [sub intf] ecmp hardware convergence acceleration at parent port oper status changes (#1492)
- [dvs/copp] Adjust policer checks in VS tests for default COPP policers (#1519)
- Flush ARP/neighbor entry on FDB flush when port L2-L3 (#1506)
- [intfmgr]: Add GARP support (#1503)
swss-common:
- [Dynamic buffer calc] Support dynamic buffer calculation (#361)
- README.md: Update build requirements (#414)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* src/sonic-utilities 6fabbed...3749f5e (7):
> [config vlan] Stop, reset-failed, then start dhcp_relay service (#1269)
> [show] Break some groups out into their own modules (#1259)
> Convert the output of 'arp -n' from bytes to str. (#1279)
> Fixing python porting errors in fdbshow, natshow and nbrshow (#1280)
> [pfcwd] Use floor division in Python3 (#1277)
> Modify fast-reboot script to use teamd service script (#1251)
> Add `show reboot-cause history` cli (#1210)
this PR updates the following Commits in sonic-platform-daemons
ab39059 [xcvrd] Fix y_cable state updates from 'failure' to 'unknown' on error conditions/events (#129)
5d74356 Clean some unused variables, check for multiAsic before calling initializeGlobalConfig (#130)
12b3628 [psud] Make sure psu leds are set on the first run (#125)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Changes for supporting vstest for VOQ system ports. The changes include:
(1)Use of chassis_db.json is avoided since the SYSTEM_PORT is made
available in virtual chassis linecard's default_config.json which will
be loaded during bootup
(2)Core port index map file is introduced and is copied from virtual chassis
directory to hwsku direcory by start.sh
(3)vs sai profile is modified to include core port index map file name
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
The issue was a typo introduced in #6006. In that change, the BGP allow list
configuration manager was updated to use a method of common ConfigMgr
for restarting peer groups. However, the method name 'restart_peers' was
used instead of the correct 'restart_peer_groups'.
This change updated the managers_allow_list.py to use correct method
'restart_peer_groups' for restarting peer groups.
Signed-off-by: Xin Wang <xiwang5@microsoft.com>
- Why I did it
'always_enabled' feature can still be disabled/enabled.
- How I did it
When checking if a feature is 'always_enabled', check the cached state to prevent new change to be accepted.
Fix an issue where cache value is updated before all the check is done.
Restore 'always_enabled' value in config db if someone wants to change.
Signed-off-by: Ying Xie ying.xie@microsoft.com
- How to verify it
Without the fix, 'always_enabled' feature can be enabled or disabled without cli protection. With the protection, the change will be rejected properly.
6fabbedc8ba0f7961bec3ec0adf7bb9d5c71eb2b [consutil][test] Add unit tests for consutil clear command (#1274)
a4f663ea0d7b52eeb76d903b19119c34ab86b1e9 [show/fgnhg] Fix crash bug (#1272)
9f276b21b06423ad11d75fbe17f46a43723f62a5 [config][loopback] Fix Bug that cannot add loopback interface by CLI (#1276)
a5b78cf968e4e5c49b764f5a76bdea6d6532c8d3 [config][show] CLI support for interacting with muxcable (#1221)
8f3b22ed11e166ed24dcd2fb1ac61e227140c2af [connect][sonic-clear] Align the exit code with consutil for line commands (#1256)
cfb7a2269406e8cca354db8a579c401e97f66e9f Feature table cli command update (#1271)
5b8da561b8712e9785622a53a2898671ada9c76e Added Multi-ASIC support for show ip(v6) route (#1216)
a7f39b04eb4b14f56f14f9851d59b81ecd5285f8 Improve MockRedis _encode(): so it will work on all types of value (#1265)
8427caf28ea60af97d8eb1eb3ccb75e99bc54184 [config_mgmt.py]: Remove sort_data call, we do not need it now. (#1246)
9dc58eaa76d38a40f33d534b13442284f598852a [sonic-utilities] Fix show vnet [neighbors | routes [all | tunnel]] crashed issue (#1263)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Made changes so that Lldp docker start using py3 of sonic-db-syncd
submodule update sonic-db-syncd
5cc29a1b32d8d1f4dfbc967bfea2727c50a49c76 (HEAD -> master, origin/master, origin/HEAD) Changes to convert sonic-dbsyncd from python 2 to 3
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
- Why I did it
Fix issue #6043
- How I did it
We are disabling in container frr log. The log entries are sent to base image and are logged in /var/log/quagga/bgpd.log.
However, we need to remove the whole outchannel config block to avoid an error message raised by rsyslogd.
- How to verify it
Without the change, test_autorestart bgp container will fail on loganalyer errors. With the change, restarting bgp container is no longer generating error message and the test will pass.
The log generated by frr continued appearing in /var/log/quagga/bgpd.log
* [bgpcfgd]: Batch bgp updates.
vtysh -f command is slow. It is sometimes takes about 3 seconds.
When we need to run many vtysh -f commands that slows down the system.
Batch vtysh -f updates.
* Use correct file to import run_command
Submodule updates include the following commits:
* src/sonic-utilities 9dc58ea...f9eb739 (18):
> Remove unnecessary calls to str.encode() now that the package is Python 3; Fix deprecation warning (#1260)
> [generate_dump] Ignoring file/directory not found Errors (#1201)
> Fixed porstat rate and util issues (#1140)
> fix error: interface counters is mismatch after warm-reboot (#1099)
> Remove unnecessary calls to str.decode() now that the package is Python 3 (#1255)
> [acl-loader] Make list sorting compliant with Python 3 (#1257)
> Replace hard-coded fast-reboot with variable. And some typo corrections (#1254)
> [configlet][portconfig] Remove calls to dict.has_key() which is not available in Python 3 (#1247)
> Remove unnecessary conversions to list() and calls to dict.keys() (#1243)
> Clean up LGTM alerts (#1239)
> Add 'requests' as install dependency in setup.py (#1240)
> Convert to Python 3 (#1128)
> Fix mock SonicV2Connector in python3: use decode_responses mode so caller code will be the same as python2 (#1238)
> [tests] Do not trim from PATH if we did not append to it; Clean up/fix shebangs in scripts (#1233)
> Updates to bgp config and show commands with BGP_INTERNAL_NEIGHBOR table (#1224)
> [cli]: NAT show commands newline issue after migrated to Python3 (#1204)
> [doc]: Update Command-Reference.md (#1231)
> Added 'import sys' in feature.py file (#1232)
* src/sonic-py-swsssdk 9d9f0c6...1664be9 (2):
> Fix: no need to decode() after redis client scan, so it will work for both python2 and python3 (#96)
> FieldValueMap `contains`(`in`) will also work when migrated to libswsscommon(C++ with SWIG wrapper) (#94)
- Also fix Python 3-related issues:
- Use integer (floor) division in config_samples.py (sonic-config-engine)
- Replace print statement with print function in eeprom.py plugin for x86_64-kvm_x86_64-r0 platform
- Update all platform plugins to be compatible with both Python 2 and Python 3
- Remove shebangs from plugins files which are not intended to be executable
- Replace tabs with spaces in Python plugin files and fix alignment, because Python 3 is more strict
- Remove trailing whitespace from plugins files
Added new flag value 'always_enabled' for the state and auto-restart field of feature table
init_cfg.json is updated to initialize state field of database/swss/syncd/teamd feature and auto-restart field of database feature
as always_enabled
Once the state/auto-restart value is initialized as "always_enabled" it is immutable and cannot be change via feature config commands. (config feature..) PR#Azure/sonic-utilities#1271
hostcfgd will not take any action if state field value is 'always_enabled'
Since we have always_enabled field for auto-restart updated supervisor-proc-exit-listener
not to have special check for database and always rely on value from Feature table.
In the emulated armhf environment, the function readdir()returns NULL on a ext4 file system directory. When running the libyang test cases, it will require to load the plugins from the files (such as metadata.so), because the readdir() is failing, the plugins can’t be loaded in the emulated armhf environment, so it causes libyang test error. This error is a combination of the following reasons.
• Emulation of a 32-bit target from a 64-bit host –> qemu from x86_64 to armhf
• Glibc version > 2.27 – Debian buster is using glibc 2.28
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
- Why I did it
The l2switch.j2 template does not include all fields for PORT. This could be incompatible with the 201911 image or later.
- How I did it
Update l2switch.j2 template and add a unit test.
- Why I did it
Add reboot history to State db so that can be used telemetry service
- How I did it
Split the process-reboot-cause service to determine-reboot-cause and process-reboot-cause
determine-reboot-cause to determine the reboot cause
process-reboot-cause to parse the reboot cause files and put the reboot history to state db
Moved to sonic-host-service* packages
- How to verify it
Performed unit test and tested on DUT
- Why I did it
frr is creating /var/log/frr/frr.log inside the frr docker and letting it grow. It will eventually exhaust hard drive space.
To fixe issue #5965
- How I did it
Remove rsyslog file outchannel so that frr won't generate /var/log/frr/frr.log inside the docker.
- How to verify it
Manually removed the outchannel and restart BGP docker, making sure that /var/log/frr/frr.log is no longer created inside the docker.
While restarting bgp docker, observed that base image /var/log/quagga/bgpd.log continued to grow and captured all FRR logs.
- Fix test_updater_thermal_check_min_max()
f6e5e5902e
- [sonic-platform-daemons] Add more physical entity information to DB for physical entity mib
14e586d676
Signed-off-by: Petro Bratash <petrox.bratash@intel.com>
Fix 259 alerts reported by the LGTM tool:
- 245 for Unused import
- 7 for Testing equality to None
- 5 for Duplicate key in dict literal
- 1 for Module is imported more than once
- 1 for Unused local variable
**- Why I did it**
We were building a custom version of Supervisor because I had added patches to prevent hangs and crashes if the system clock ever rolled backward. Those changes were merged into the upstream Supervisor repo as of version 3.4.0 (http://supervisord.org/changes.html#id9), therefore, we should be able to simply install the vanilla package via pip. This will also allow us to easily move to Python 3, as Python 3 support was added in version 4.0.0.
**- How I did it**
- Remove Makefiles and patches for building supervisor package from source
- Install Python 3 supervisor package version 4.2.1 in Buster base container
- Also install Python 3 version of supervisord-dependent-startup in Buster base container
- Debian package installed binary in `/usr/bin/`, but pip package installs in `/usr/local/bin/`, so rather than update all absolute paths, I changed all references to simply call `supervisord` and let the system PATH find the executable to prevent future need for changes just in case we ever need to switch back to build a Debian package, then we won't need to modify these again.
- Install Python 2 supervisor package >= 3.4.0 in Stretch and Jessie base containers
Update the sonic-swss submodule. The following are the commits in the submodule.
[dvs] Re-add runcmd_async command
5ba548cd759be4f0b1d1830ea038bf3c84e6f3f6
[dvs] Re-add copy_file method to DVS
86e11715819ac183a68aaf1deed6beabb259384b
Add a check for warm-restart, and do a clear only when warm-restart is enable.
fcb6c9de918d93967440b78bf7d5cd3a51bf7129
[Routeorch] Fix next hop group reference count in bulk operation
7a92100c1c1a344e67d4501cb7b98de557d0ea52
[orchagent][port] In case of successful port creation set log level to INFO
fea7ade74941a529505681e384f3437e873b1f7a
Copp Manager Changes
7b76d2e201f9f7d26cec7460f1335f7762b4ad01
[orchagent] Arm 32-bit arch compilation warning Fixes
bed79702c9da7957b775a0c960f67dd426db34d5
Revert: swss: flush g_asicState after each event is done #570
b9084a720d41daf1d717bcbe06f56e7a95111fa6
[dvs] Clean-up conftest.py
d6e15e955c91a6f077a913a617a336a314c6c91b
Update the sonic-swss-common submodule. The following are the commits in the submodule.
```
95f9e11 2020-11-19 | [pyext] allow to catch exceptions raised in python (#415) [Stepan Blyshchak]
5a718f9 2020-11-18 | [swig] translate C++ `del` to python `delete` (#416) [Qi Luo]
40b255b 2020-11-12 | Fix: SWIG dict.get() should have optional default value parameter (#413) [Qi Luo]
91e484d 2020-11-07 | Reduce notice logging (#412) [Qi Luo]
f5945ae 2020-11-05 | Mux Cable schema definitions for interaction between linkmanager and xcvrd (#411) [vdahiya12]
602f9c2 2020-11-05 | [lua] load lua script on demand (#409) [Dong Zhang]
d88412b 2020-11-04 | Rename hdel to del when using multiple keys as param (#410) [Kamil Cudnik]
e0c229a 2020-11-04 | CHASSIS_STATE_DB on control-card for chassis state (#395) [mprabhu-nokia]
a4e3ac8 2020-11-04 | Chassisd config table to store admin state (#388) [mprabhu-nokia]
```
* Add explicit default state into the constants.yml
* Enable/disable only peer-groups, available in the config
* Retrieve updates from frr before using configuration
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
Changes:
1.) yang models for device_metadata, device_neighbor, flex_counters, crm, versions.
2.) Test cases for above yang models.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com:
The behavior of `subprocess.Popen()` changed in Python 3 such that stdin, stdout and stderr are treated as bytes by default. Adding the `universal_newlines=True` argument changes this behavior to return strings, matching the behavior of Python 2. The change is backward-compatible with Python 2, as well.
This should also fix the vsimage check build.
Commits include:
* src/sonic-platform-common a659219...e4883e5 (7):
> [PsuBase] Reference inherited member constant (#142)
> Thermalctld APIs for recording min and max temp (#131)
> Common power consumption and supply APIs for modular chassis (#136)
> [sonic-platform-base] Introduce APIs for modular chassis support (#124)
> Remove shebangs from non-executable Python files (#140)
> [sonic_eeprom] Make compatible with Python 2 and 3 (#127)
> Add unit test infrastructure (#139)
* src/sonic-platform-daemons 600d043...be21d91 (9):
> [psud] Import of mock libraries determined by environment variable (#117)
> [chassisd][thermalctld] Set testing env var at top of file, not in setup_function() (#114)
> [chassisd][thermalctld] Import os module, now needed for env var checking (#113)
> [chassisd][thermalctld] Import mock libraries based on environment variable (#112)
> [xcvrd] Fix the console-script xcvrd startup (#111)
> [Thermalctld] Update thermal info to CHASSIS_STATE_DB (#101)
> PSUd changes to compute power-budget for Modular chassis (#104)
> Introduce chassisd to monitor status of cards on chassis (#97)
> [xcvrd] support for integrating Credo Y cable Ports initialization and status updates with xcvrd. (#105)
Fixed TSA bugs:
1. TSA didn't advertise Loopback ipv6 address
2. TSA and TSB changed BGP dynamic and BGP monitors sessions
**- How to verify it**
Build an image and run on your DUT.
```
admin@str-s6100-acs-1:~$ TSA
System Mode: Normal -> Maintenance
admin@str-s6100-acs-1:~$ vtysh -c 'show bgp ipv4 neighbors 10.0.0.1 advertised-routes'
BGP table version is 6, local router ID is 10.1.0.32, vrf id 0
Default local pref 100, local AS 64601
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.1.0.32/32 0.0.0.0 0 32768 i
Total number of prefixes 1
admin@str-s6100-acs-1:~$ vtysh -c 'show bgp ipv6 neighbors fc00::a advertised-routes'
BGP table version is 6, local router ID is 10.1.0.32, vrf id 0
Default local pref 100, local AS 64601
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> fc00:1::/64 :: 0 32768 i
Total number of prefixes 1
admin@str-s6100-acs-1:~$ TSB
System Mode: Maintenance -> Normal
```
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
* Create new `PEER_SWITCH` table in config DB with info from minigraph
* Add `subtype` field to `DEVICE_METADATA` table and set value to `DualToR` if device is in a dual ToR setup
sonic-bgpcfgd build fails in the absence of Python 2, as it attempts to explicitly call sonic-cfggen using `/usr/bin/python2.7`. Also, it attempts to call sonic-cfggen using a local, relative path. Since the sonic-config-engine package is not installed, neither are its dependencies.
Now, we configure the Python 3 sonic-config-engine as a dependency of sonic-bgpcfgd, which ensures the Python 3 sonic-config-engine package and its dependencies are installed before sonic-bgpcfgd is built/tested.
Submodule updates include the following commits. Also adding sonic-swsscommon build dependencies where necessary.
* src/sonic-py-swsssdk 1ea30d2...9d9f0c6 (1):
> [SonicV2Connector] make decode_responses=True as default, so python2 application need no code change when migrated to python3(#93)
* src/sonic-snmpagent 6e4a796...57e54d9 (3):
> Interact with Redis by str instead of bytes, migrate to SonicV2Connector with `decode_responses=True` (#171)
> Add a test case for LLDP_LOC_CHASSIS.lldp_loc_man_addr has only one IPv6 address (#167)
> [LLDP]: Update init_db to load global database config (#166)
* src/sonic-utilities acfa824...b693cf6 (11):
> Remove SKU create pytest output directory before execution of the script (#1226)
> [show][techsupport][multi-ASIC] Add support to collect tech support on multi ASIC platform (#1193)
> [show] Fix `show ip bgp sum` (#1194)
> [sonic_sku_create] Move tests from sonic-utilities-tests/ folder to tests/ folder (#1222)
> Replace swsssdk.SonicV2Connector with swsscommon.SonicV2Connector (SWIG wrapper of C++ implementation) in production code (#1217)
> Copy missing values from INIT_CFG to config_db as part of db_migration task (#1209)
> [connect][clear] Support --devicename option for connect/clear line commands (#1214)
> [consutil][show] Remove root need from show line command (#1218)
> [Mellanox] SKU creator Tool (#1163)
> SONiC installer - fix string formatting during image type check (#1197)
> [show/fgnhg.py] Fix whitespace issues (#1211)
remove commit
850d0c6 2020-11-09 | [xcvrd] support for integrating Credo Y cable Ports initialization and status updates with xcvrd. (#105) (HEAD, origin/master, origin/HEAD) [vdahiya12]
fix issue #5907
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Treat devices that are ToRRouters (ToRRouters and BackEndToRRouters) the same when rendering templates
Except for BackEndToRRouters belonging to a storage cluster, since these devices have extra sub-interfaces created
Treat devices that are LeafRouters (LeafRouters and BackEndLeafRouters) the same when rendering templates
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
When forced mgmt routes are present, the issue fixed as part of #5754 is not complete.
Added a preference(priority) field to forced mgmt route ip rules
Python 3 is more strict with `__slots__`. As per the [documentation](https://docs.python.org/3/reference/datamodel.html#notes-on-using-slots):
> \_\_slots\_\_ are implemented at the class level by creating descriptors (Implementing Descriptors) for each variable name. As a result, class attributes cannot be used to set default values for instance variables defined by \_\_slots\_\_; otherwise, the class attribute would overwrite the descriptor assignment.
This was apparently missed when making sonic-config-engine compliant with Python 3, and errors like the following would be seen:
```
tests/acl_loader_test.py:10: in <module>
from acl_loader.main import *
acl_loader/main.py:8: in <module>
import openconfig_acl
/usr/local/lib/python3.7/dist-packages/openconfig_acl.py:24: in <module>
class yc_state_openconfig_acl__acl_state(PybindBase):
E ValueError: '_pybind_generated_by' in __slots__ conflicts with class variable
```
To make Control plane ACLs handle case insensitive ACL rules. Currently, it handles only upper case ACL rules.
Co-authored-by: Madhan Babu <madhan@arc-build-server.mtr.labs.mlnx>
850d0c6 [xcvrd] support for integrating Credo Y cable Ports initialization and status updates with xcvrd. (#105)
600d043 [xcvrd] Add enum dependence back; Install 'enum34' conditionally based on Python version (#107)
af79326 [xcvrd] Remove log errors in single ASIC platforms with init Global config (#108)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
- Why I did it
Update the routine is_bgp_session_internal() by checking the BGP_INTERNAL_NEIGHBOR table.
Additionally to address the review comment #5520 (comment)
Add timer settings as will in the internal session templates and keep it minimal as these sessions which will always be up.
Updates to the internal tests data + add all of it to template tests.
- How I did it
Updated the APIs and the template files.
- How to verify it
Verified the internal BGP sessions are displayed correctly with show commands with this API is_bgp_session_internal()
Take tunnel info from `<TunnelInterface>` tag in minigraph, and create tables in config_DB:
```
"TUNNEL": {
"MUX_TUNNEL_0": {
"tunnel_type": "IPINIP",
"dst_ip": "26.1.1.10",
"dscp_mode": "uniform",
"encap_ecn_mode": "standard",
"ecn_mode": "copy_from_outer",
"ttl_mode": "pipe"
}
}
```
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
To consolidate host services and install via packages instead of file-by-file, also as part of migrating all of SONiC to Python 3, as Python 2 is no longer supported.
Fix#5812
LLDP conf Jinja2 Template does not verify IPv4 address and can use IPv6 version. This issue does not effect control LLDP daemon. Issue can be reproduced via `test_snmp_lldp` test. LLDP conf Jinja2 Template selects first item from the list of mgmt interfaces.
TESTBED_1 LLDP conf
```
# cat /etc/lldpd.conf
configure ports eth0 lldp portidsubtype local eth0
configure system ip management pattern FC00:3::32
configure system hostname dut-1
```
TESTBED_2 LLDP conf
```
# cat /etc/lldpd.conf
configure ports eth0 lldp portidsubtype local eth0
configure system ip management pattern 10.22.24.61
configure system hostname dut-2
```
TESTBED_1 MGMT_INTERFACE
```
$ redis-cli -n 4 keys "*" | grep MGMT_INTERFACE
MGMT_INTERFACE|eth0|10.22.24.53/23
MGMT_INTERFACE|eth0|FC00:3::32/64
```
TESTBED_2 MGMT_INTERFACE
```
$ redis-cli -n 4 keys "*" | grep MGMT_INTERFACE
MGMT_INTERFACE|eth0|FC00:3::32/64
MGMT_INTERFACE|eth0|10.22.24.61/23
```
Signed-off-by: Petro Bratash <petrox.bratash@intel.com>
Add a switch to route_check to control whether write log to syslog (#1215)
[consutil] Store console port state in STATE_DB (#1208)
[sfputil] Display 'N/A' for non-SFP ports (#1078)
Show FG_NHG CLI Commands Added (#1056)
[show] remove 'device2interface_dict' in show interface neighbor expected (#1188)
Add license file, remove third-party licenses file (#1192)
[fwutil]: Set min log priority to INFO. (#1191)
[CLI][show][platform] Added ASIC count in the output. (#1185)
fdbshow and nbrshow use SonicV2Connector with decode_responses=True, and remove all the decode() (#1187)
Remove stdeb.cfg; no longer used now that we build as wheel (#1182)
[counterpoll] Disable Counter Poll When Entering Fast Reboot (#1174)
Fixes the issue with show interface counters and for pfc and queue counters. (#1180)
[config/show] Add CLI support for proxy arp (#1168)
[consutil] Add brief option to show line command (#1176)
Modify fast-reboot script to use BGP service script to stop bgp service (#1177)
[config/console] Support update console configuration related commands (#1166)
[consutil] Fix issue where the show line command crash if no ttyUSB exists (#1173)
[watermarkstat] Add unit tests for watermarkstat show commands (#1157)
Fix exception for ipaddress in python2 (#1164)
[celestica] consutil to support customize tty device name (#1155)
Signed-off-by: Danny Allen <daall@microsoft.com>
- Convert config_checker, media_checker and platform_json_checker scripts to Python 3
- Reorganize imports per PEP8 standard
- Two blank lines precede functions per PEP8 standard
* Convert bgpcfgd to python3
Convert bgpmon to python3
Fix some issues in bgpmon
* Add python3-swsscommon as depends
* Install dependencies
* reorder deps
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
Changes:
-- ACL stage allow lower and upper.
-- ACL include services leaf-list.
-- PORT include pfc_asym leaf.
-- PORT fec alloe none as per code.
-- 3 Tests for above changes.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
ec96868 2020-11-03 | Fix: treat DBConnector timeout=0 as infinite timeout (#408) [Qi Luo]
b4b8334 2020-11-03 | Add lua script for redis multi keys api hmset and del (#406) [Kamil Cudnik]
swss:
* d7643f2 2020-11-01 | [tlm_teamd]: Make the destionation for std::transform() to use std::back_inserter() for allocating new space for the copied objects (#1490) (HEAD, origin/master, origin/HEAD) [pavel-shirshov]
* 7fa7cd6 2020-10-31 | [vstest]: stablize fgnhg test (#1491) [lguohan]
* 9b0696e 2020-10-29 | Create vnet tunnel map only if it doesn't exist (#1482) [Prince Sunny]
* 0481e99 2020-10-29 | [acl] Update CRM to include LAG bindings for ACL tables (#1487) [Danny Allen]
sairedis
* 5df11f5 2020-11-01 | [syncd] Lower bulk missing api message level from error to info (#687) (HEAD, origin/master, origin/HEAD) [Kamil Cudnik]
* dc73a1d 2020-10-30 | [saiplayer] Fix log messages (#686) [Kamil Cudnik]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
* Build and install openssh from source
* Copy openssh deb package to dest folder
* Update make rule
* Update sonic debian extension
* Append empty line before EOF
* Update openssh patch
* Add openssh-server to base image dependency
* Fix indent type
* Fix comments
* Use commit id instead of tag id and add comment
Signed-off-by: Jing Kan jika@microsoft.com
FixAzure/SONiC#551
When eth0 IP address is configured, an ip rule is getting added for eth0 IP address through the interfaces.j2 template.
This eth0 ip rule creates an issue when VRF (data VRF or management VRF) is also created in the system.
When any VRF (data VRF or management VRF) is created, a new rule is getting added automatically by kernel as "1000: from all lookup [l3mdev-table]".
This l3mdev IP rule is never getting deleted even if VRF is deleted.
Once if this l3mdev IP rule is added, if user configures IP address for the eth0 interface, interfaces.j2 adds an eth0 IP rule as "1000:from 100.104.47.74 lookup default ". Priority 1000 is automatically chosen by kernel and hence this rule gets higher priority than the already existing rule "1001:from all lookup local ".
This results in an issue "ping from console to eth0 IP does not work once if VRF is created" as explained in Issue 551.
More details and possible solutions are explained as comments in the Issue551.
This PR is to resolve the issue by always fixing the low priority 32765 for the IP rule that is created for the eth0 IP address.
Tested with various combinations of VRF creation, deletion and IP address configuration along with ping from console to eth0 IP address.
Co-authored-by: Kannan KVS <kannan_kvs@dell.com>
Added new MultiASIC util method "get_back_end_interface_set()" to speed up back-end interface check by allowing caller to cache the back-end intf into a set. This way the caller can use this set for all subsequent back-end interface check requests instead of each time need to read from redis DB which become a scaling issue for cases such as checking for thousands of nexthop routes for filtering purpose.
Why/How I did:
Make sure first error syslog is triggered based on FAULT TOLERANCE condition.
Added support of repeat clause with alert action. This is used as trigger
for generation of periodic syslog error messages if error is persistent
Updated the monit conf files with repeat every x cycles for the alert action
Update the sonic-swss submodule. The following are the commits in the submodule.
[neighorch] Remove pending DEL operation after SET operation for the same key
2265f548386929b7827d1079efd453128f1ec1f9
[NAT]: Update nat entries to use nat_type to support DNAT Pool changes.
8696e939f973895ead4731ad499a72f257a3b510
[intfsorch] Init proxy_arp variable while adding router interface.
1da3c773762fa637a5ea47017715361bede50a4a
To consolidate host services and install via packages instead of file-by-file, also as part of migrating all of SONiC to Python 3, as Python 2 is no longer supported, convert caclmgrd to Python 3 and add to sonic-host-services package
95b1696 [xcvrd] Remove dependence on enum; Add 'sonic-py-common' as dependencies in setup.py (#106)
61ed24e [thermalctld] Print exception using repr(e) to get more information (#103)
8507085 [psud] Fix psud logging (#98)
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
* Initial commit for BGP internal neighbor table support.
> Add new template named "internal" for the internal BGP sessions
> Add a new table in database "BGP_INTERNAL_NEIGHBOR"
> The internal BGP sessions will be stored in this new table "BGP_INTERNAL_NEIGHBOR"
* Changes in template generation tests with the introduction of internal neighbor template files.
Update the sonic-sairedis submodule. The following are the commits in the submodule.
[syncd_init_common.sh] Use template file to retrieve vars (#683)
0bf336a3e895167357d5d2e5a988471e115522e8
[syncd/FlexCounter]:Fix last remove bug (#679)
4d21a264d5956501bf69ad3a89ea2ebccd369654
a659219 [SONIC_SFP] adding abstract methods for reading and writing the eeprom address space within platform api (#126)
848f4a6 Add third-party licenses (#138)
c2ecd9a Add license file (#137)
403747a [sonic-platform-common] Add new platform API for SONiC Physical MIB Extension feature (#134)
19b8545 [sonic_y_cable] fix the unpacking (#135)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* Fix for LLDP advertisments being sent with wrong information.
Since lldpd is starting before lldpmgr, some advertisment packets might sent with default value, mac address as Port ID.
This fix hold the packets from being sent by the lldpd until all interfaces are well configured by the lldpmgrd.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* Fix comments
* Fix unit-test output caused a failure during build
* Add 'run_cmd' function and use it
* Resume lldpd even if port init timeout reached
Advance sonic-swss-common submodule by adding the following commits
3ec30ef Deprecate RedisClient and remove unused header file (#399)
165a679 Schema update for BGP internal neighbor table (#389)
262e330 Fix SonicV2Connector interfaces (#396)
Advance sonic-sairedis submodule by adding the following commits
bc3e044 [Sai]: Change Sai::set log to level INFO (#680)
b16bc8b Clean code: remove unused header file (#678)
40439b4 [syncd] Remove depreacated dependency on swss::RedisClient (#681)
1b6fc2e [syncd] Add supports of bulk api in syncd (#656)
a9f69c1 [syncd] Add to handle FDB MOVE notification (#670)
c7ef5e9 [gbsyncd] exit with zero when platform has no gearbox (#676)
57228fd [gbsyncd]: add missing python dependency (#675)
02a57a6 [vs] Add CRM SAI attributes to virtual switch interface (#673)
609445a fix boot type for fast boot (#674)
1325cdf Add support for saiplayer bulk API and add performance timers (#666)
1d84b90 Add ZeroMQ communication channel between sairedis and syncd (#659)
017056a Support System ports config (#657)
0f3668f Enable fabric counter for syncd's FlexCounter (#669)
Find LogicalLinks in minigraph and parse the port information. A new field called `mux_cable` is added to each port's entry in the Port table in config DB:
```
PORT|Ethernet0: {
"alias": "Ethernet4/1"
...
"mux_cable": "true"
}
```
If a mux cable is present on a port, the value for `mux_cable` will be `"true"`. If no mux cable is present, the attribute will either be omitted (default behavior) or set to `"false"`.
Current implementation of logger class is based on standard python syslog library.
Thus, logger class can be instantiated in different places and share the same context across the entire process.
This means that reducing log severity level will affect other modules which use logging facility.
**- Why I did it**
* To fix syslog implicit min priority override
**- How I did it**
* Added per instance log severity check
**- How to verify it**
1. Run code snippet
```
from sonic_py_common import logger
log1 = logger.Logger(log_identifier='myApp1')
log1.set_min_log_priority_debug()
log1.log_error("=> this is error")
log1.log_warning("=> this is warning")
log1.log_notice("=> this is notice")
log1.log_info("=> this is info")
log1.log_debug("=> this is debug")
log2 = logger.Logger(
log_identifier='myApp2',
log_facility=logger.Logger.LOG_FACILITY_DAEMON,
log_option=(logger.Logger.LOG_OPTION_NDELAY | logger.Logger.LOG_OPTION_PID)
)
log2.log_error("=> this is error")
log2.log_warning("=> this is warning")
log2.log_notice("=> this is notice")
log2.log_info("=> this is info")
log2.log_debug("=> this is debug")
```
2. Sample output:
```
Oct 23 15:08:30.447301 sonic ERR myApp1: => this is error
Oct 23 15:08:30.447908 sonic WARNING myApp1: => this is warning
Oct 23 15:08:30.448305 sonic NOTICE myApp1: => this is notice
Oct 23 15:08:30.448696 sonic INFO myApp1: => this is info
Oct 23 15:08:30.449063 sonic DEBUG myApp1: => this is debug
Oct 23 15:08:30.449442 sonic ERR myApp2[19178]: => this is error
Oct 23 15:08:30.449819 sonic WARNING myApp2[19178]: => this is warning
Oct 23 15:08:30.450183 sonic NOTICE myApp2[19178]: => this is notice
```
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
**- Why I did it**
Install all host services and their data files in package format rather than file-by-file
**- How I did it**
- Create sonic-host-services Python wheel package, currently including procdockerstatsd
- Also add the framework for unit tests by adding one simple procdockerstatsd test case
- Create sonic-host-services-data Debian package which is responsible for installing the related systemd unit files to control the services in the Python wheel. This package will also be responsible for installing any Jinja2 templates and other data files needed by the host services.
**- Why I did it**
On teamd docker restart, the swss and syncd needs to be restarted as there are dependent resources present.
**- How I did it**
Add the teamd as a dependent service for swss
Updated the docker-wait script to handle service and dependent services separately.
Handle the case of warm-restart for the dependent service
**- How to verify it**
Verified the following scenario's with the following testbed
VM1 ----------------------------[DUT 6100] -----------------------VM2, ping traffic continuous between VMs
1. Stop teamd docker alone
> swss, syncd dockers seen going away
> The LAG reference count error messages seen for a while till swss docker stops.
> Dockers back up.
2. Enable WR mode for teamd. Stop teamd docker alone
> swss, syncd dockers not removed.
> The LAG reference count error messages not seen
> Repeated stop teamd docker test - same result, no effect on swss/syncd.
3. Stop swss docker.
> swss, teamd, syncd goes off - dockers comes back correctly, interfaces up
4. Enable WR mode for swss . Stop swss docker
> swss goes off not affecting syncd/teamd dockers.
5. Config reload
> no reference counter error seen, dockers comes back correctly, with interfaces up
6. Warm reboot, observations below
> swss docker goes off first
> teamd + syncd goes off to the end of WR process.
> dockers comes back up fine.
> ping traffic between VM's was NOT HIT
7. Fast reboot, observations below
> teamd goes off first ( **confirmed swss don't exit here** )
> swss goes off next
> syncd goes away at the end of the FR process
> dockers comes back up fine.
> there is a traffic HIT as per fast-reboot
8. Verified in multi-asic platform, the tests above other than WR/FB scenarios
