[sonic-linkmgrd][202012] submodule update
0839af2 Longxiang Lyu Wed Jun 15 08:46:21 2022 +0800 [202012] Fix IP header checksum in handleSendSwitchCommand (#89)
afc4972 Jing Zhang Wed Jun 1 10:33:12 2022 -0700 Revert "Update log level for mux probing and mux state chance (#23)" (#85)
ed52d0a Longxiang Lyu Tue May 31 10:28:30 2022 +0800 Add a command line option to store logs into a separate file (#83)
sign-off: Jing Zhang zhangjing@microsoft.com
Update sonic-sairedis submodule to include cross-branch warmboot fix:
Azure/sonic-sairedis#1065: Support ACL action data object in remove dep tree:
This is required if some of the attributes on ACL action data
object are OID's and we need to catch their refrence when
removing object and it's dependency tree.
* [202012][Tunnel PFC][Fix bug] Fix bug and Tests for adding property 'sai_remap_prio_on_tnl_egress'
manual cherry-pick from https://github.com/Azure/sonic-buildimage/pull/11027
Fix a bug in the template
Add tests for adding property 'sai_remap_prio_on_tnl_egress', this
property should only be added in dual tor environment.
* merge change after sync from 202012 and remove a mistaken changes in cherry-pick
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
This fixes the build for armhf to be able to use '/device///installer.conf' files. Specifically, armhf needs support to be able to change the size of /var/log/ directory. It is hardcoded to 512 bytes on all armhf platforms currently. This change will allow any armhf platform to be able to use an installer.conf file to customize the installed image.
* Generate expected output with 300m cable len and compare against it
Signed-off-by: Neetha John <nejo@microsoft.com>
* Rewrite assert logic
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
This is a cherry-pick PR from master to 202012 branch
below is the original PR which merged to master.
#10716
How I did it
How to verify it
- Why I did it
Recent change to delay PMON service in case of fast/warm reboot introduce an issue when restarting only SWSS service after fast/warm reboot for Nvidia platform.
Since the timer is triggered only when the system boot, in a scenario when the system is after a fast/warm reboot and the user restart SWSS service, as part of syncd.sh script, PMON service will stop but the timer will not start again.
- How I did it
On syncd.sh script, in case of fast/warm indication, check if pmon.timer is running.
If it is running it means we are at the first boot and continue normally.
If it is not running, meaning the service was restarted, start the timer to keep the system behavior consistent.
- How to verify it
Run fast/warm reboot.
service swss restart.
Observe PMON service starting.
Why I did it
Fix the target directory not empty issue when publishing artifacts.
Some of the artifacts are published to $(Build.ArtifactStagingDirectory)/target/ before source code checked out.
Backport changes from #11018
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
As part of PCBB changes, we need to enable 2 extra lossless queues. The changes in this PR are done to adjust only the reserved sizes on Th2 for the additional 2 lossless queues
Calculations are done based on 40 downlinks for T1 and 16 uplinks for dual ToR
How to verify it
Verified that the rendering works fine on Th2 dut
Unit tests have been updated to reflect the modified buffer sizes when pcbb is enabled. There are existing testcases that will test the original buffer sizes when pcbb is disabled. With these changes, was able to build sonic-config-engine wheel successfully
Important fixes since 202012-v0.97:
V0.102:
Hwsku changes to Cisco-8102-C64
Fix for watermark clear issue
V0.101:
Fix for dhcp_relay test issue
V0.100:
Fix for container_autorestart test issue
V0.99:
Fix for everflow test issue
Fix for pfcwd test issue
Fix for copp test issue
V0.98:
Fix for qos_sai test issue
RDMA enhancements dev complete and content included in this drop (flow based VoQ, ECN, Alpha)
Signed-off-by: Kevin Wang <shengkaiwang@microsoft.com>
Support Tunnel PFC/pcbb feature on Broadcom platform.
How to verify it
Tested build target, successful
make target/docker-syncd-brcm.gz
manual run those tests after installing sai binary within image 20201231.67 on 7050CX3 (TD3) T0 DUT, all passed
fib/test_fib.py
vxlan/test_vxlan_decap.py
fdb/test_fdb.py
decap/test_decap.py
pfcwd/test_pfcwd_all_port_storm.py
acl/null_route/test_null_route_helper.py
acl/test_acl.py
vlan/test_vlan.py
platform_tests/test_reboot.py
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
This PR is to advance sonic-swss submodule for 202012 branch.
Changes include
eef993f [202012][cherry-pick]Update orchagent to support new field pfcwd_sw_enable (#2302)
ab675b3 [202012][cherry-pick] Support tunnel traffic QoS remapping (#2246)
Signed-off-by: bingwang <bingwang@microsoft.com>
Why I did it
As part of PCBB changes, we need to enable 2 extra lossless queues. The changes in this PR are done to adjust only the reserved sizes on Th2 for the additional 2 lossless queues
Calculations are done based on 40 downlinks for T1 and 16 uplinks for dual ToR
How to verify it
Verified that the rendering works fine on Th2 dut
Unit tests have been updated to reflect the modified buffer sizes when pcbb is enabled. There are existing testcases that will test the original buffer sizes when pcbb is disabled. With these changes, was able to build sonic-config-engine wheel successfully
Signed-off-by: Neetha John <nejo@microsoft.com>
* [Tunnel PFC] Add property for tunnel PFC
Replace the config.bcm file with j2 template file
- Add 'sai_remap_prio_on_tnl_egress=1' property when device metadata local
- Host subtype is 'dualtor'
- Change sai.profile foe the new config.bcm.j2
Why I did it
Introduce 2 sub jobs for kvmtest t0 job in sonic-mgmt repo in PR Azure/sonic-mgmt#4861
But in sonic-buildimage repo, because section parameter is null, it always run the part 2 test scripts in kvmtest t0 job.
It missed the part 1 test scripts in kvmtest.sh.
How I did it
Split kvmtest t0 job into two sub jobs such as sonic-mgmt repo and run them in parallel to save time.
How to verify it
Submit PR will trigger the pipeline to run.
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
(cherry picked from commit 44028723ef)
Co-authored-by: Zhaohui Sun <94606222+ZhaohuiS@users.noreply.github.com>
* Use buster-backports version
* Use dget dsc file instead source repo
* Update make files
* Upgrade openssh-client to 8.4 in base image
* Remove useless installation
* Install openssh-server from buster-backports in build_debian
* Update dev buster package version list
Signed-off-by: Jing Kan jika@microsoft.com
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
This PR adds the following commits are added in sonic-platform-common
ac25515 (HEAD -> 202012, origin/202012) [Credo][Ycable] changes for
synchronizing executing Telemetry API's when mux toggle is inprogress
(#280)
fb304c1 [sonic_ssd] Nokia-7215: "show platform ssdhealth" not showing
health percent (#279)
8bfe9c0 [Credo][Ycable] improve logging for Server Powered off/Faulty
cables (#272)
The following commits are added in sonic-platform-daemons
6695c55 (HEAD -> 202012, origin/202012) [ycabled] fix the posting for
mux_cable_static_info per downlink when ycabled is spawned;
synchronizing executing Telemetry API (#257)
6a315ae (HEAD -> 202012, origin/202012) [ycabled] Fix some syntax
warnings in ycabled (#263)
Why I did it
Cherry-pick of: #7632
portconfig.py gets PORT table from config_db if it is present. If not, port_config.ini files are parsed.
For multi-asic platform, if namespace is passed to get_port_config(), config_db connection was done to host namespace always and not to asic specific namespace.
Provides fix for: #7161
How I did it
Modify db connection function to connect to namespace config_db.
How to verify it
Unit-test passed.
Verified on multi-asic VS platform.
Why I did it
To remove the ipmihelper.py in S5248f directory to prevent the image label being marked 'dirty', due to the file being replaced by the ipmihelper.py in common folder during build.
How I did it
Remove ipmihelper.py in S5248f directory.
How to verify it
Build a broadcom image and verify that the tracked files are not modified.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
Description for the changelog
DellEMC S5248f : Remove duplicate ipmihelper.py
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
There was a typo in hwsku specified as part of #10889
How I did it
Replaced with the correct hwsku
How to verify it
test_cfggen.py is passing
This reverts commit 15cf9b0d70.
Why I did it
Revert the PR #10775, for it has impact on onie installation.
It is caused by the symbol links not supported in some of the onie unzip.
We will enable after fixing the issue, see #10914
#### Why I did it
To ensure that some internal testcases do not break due to external changes
#### How to verify it
Ran test_cfggen.py with the changes and it passed
Why I did it
It is not necessary to trigger the publish pipeline when build is failed.
How I did it
Remove the condition in the azp task, change to use template condition.
