1. remove container feature table
2. do not generate feature entry if the feature is not included
in the image
3. rename ENABLE_* to INCLUDE_* for better clarity
4. rename feature status to feature state
5. [submodule]: update sonic-utilities
* 9700e45 2020-08-03 | [show/config]: combine feature and container feature cli (#1015) (HEAD, origin/master, origin/HEAD) [lguohan]
* c9d3550 2020-08-03 | [tests]: fix drops_group_test failure on second run (#1023) [lguohan]
* dfaae69 2020-08-03 | [lldpshow]: Fix input device is not a TTY error (#1016) [Arun Saravanan Balachandran]
* 216688e 2020-08-02 | [tests]: rename sonic-utilitie-tests to tests (#1022) [lguohan]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Consolidate common SONiC Python-language functionality into one shared package (sonic-py-common) and eliminate duplicate code.
The package currently includes three modules:
- daemon_base
- device_info
- logger
This PR updates kubernetes version to 1.18.6 and kubernetes-cni version to 0.8.6
signed-off by: Isabel Li isabel.li@microsoft.com
Why I did it
Previous kubernetes-cni version (0.7.5) introduced Kubernetes Man In The Middle Vulnerability. “A vulnerability was found in all versions of containernetworking/plugins before version 0.8.6, that allows malicious containers in Kubernetes clusters to perform man-in-the-middle (MitM) attacks. A malicious container can exploit this flaw by sending rogue IPv6 router advertisements to the host or other containers, to redirect traffic to the malicious container.”
How I did it
Defined kubernetes-cni version to be 0.8.6 and updated kubernetes version to be 1.18.6
How to verify it
Check versions by running dpkg -l | grep kube
* [sonic-buildimage] Changes to make network specific sysctl
common for both host and docker namespace (in multi-npu).
This change is triggered with issue found in multi-npu platforms
where in docker namespace
net.ipv6.conf.all.forwarding was 0 (should be 1) because of
which RS/RA message were triggered and link-local router were learnt.
Beside this there were some other sysctl.net.ipv6* params whose value
in docker namespace is not same as host namespace.
So to make we are always in sync in host and docker namespace
created common file that list all sysctl.net.* params and used
both by host and docker namespace. Any change will get applied
to both namespace.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments and made sure to invoke augtool
only one and do string concatenation of all set commands
* Address Review Comments.
* Add secureboot support in boot0
* Initramfs changes for secureboot on Aboot devices
* Do not compress squashfs and gz in fs.zip
It doesn't make much sense to do so since these files are already
compressed.
Also not compressing the squashfs has the advantage of making it
mountable via a loop device.
* Add loopoffset parameter to initramfs-tools
* Run fsck filesystem check support prior mounting filesystem
If the filesystem become non clean ("dirty"), SONiC does not run fsck to
repair and mark it as clean again.
This patch adds the functionality to run fsck on each boot, prior to the
filesystem being mounted. This allows the filesystem to be repaired if
needed.
Note that if the filesystem is maked as clean, fsck does nothing and simply
return so this is perfectly fine to call fsck every time prior to mount the
filesystem.
How to verify this patch (using bash):
Using an image without this patch:
Make the filesystem "dirty" (not clean)
[we are making the assumption that filesystem is stored in /dev/sda3 - Please adjust depending of the platform]
[do this only on a test platform!]
dd if=/dev/sda3 of=superblock bs=1 count=2048
printf "$(printf '\\x%02X' 2)" | dd of="superblock" bs=1 seek=1082 count=1 conv=notrunc &> /dev/null
dd of=/dev/sda3 if=superblock bs=1 count=2048
Verify that filesystem is not clean
tune2fs -l /dev/sda3 | grep "Filesystem state:"
reboot and verify that the filesystem is still not clean
Redo the same test with an image with this patch, and verify that at next reboot the filesystem is repaired and becomes clean.
fsck log is stored on syslog, using the string FSCK as markup.
- create a file in files/image_config/ntp/ntp-systemd-wrapper to add mgmt vrf related start cmd for ntp service. So that the default /usr/lib/ntp/ntp-systemd-wrapper can be overriden during build time.
- modify build_debian.sh to cp files/image_config/ntp/ntp-systemd-wrapper to /usr/lib/ntp/ntp-systemd-wrapper during build time.
Co-authored-by: Bing Sun <Bing_Sun@dell.com>
do mount/umount in the chroot environment
install cron explicitly
install rasdaemon as a replacement for mcelog
switch python package docker-py to docker
- build SONIC_STRETCH_DOCKERS in sonic-slave-stretch docker
- build image related module in sonic-slave-buster docker.
This includes all kernels modules and some packages
Signed-off-by: Guohan Lu <lguohan@gmail.com>
* Install kubernetes worker node packages, if enabled.
* Minor updates
* Added some comments
* Updates per review comments.
Built a private image to test to work fine.
* Remove the removed file.
* Update per comments
Make a fix, as kubeadm no demands a higher version of kubelet & kubectl.
As kubeadm auto install kubectl & kubelet, removing explicit install is an easier/robust fix.
* Changes per review comments.
* Updates per comments.
1) Dropped helper & pod scripts
2) Made install verbose
* Drop creation of pods subdir, as this PR does not use them.
* From comments to 'n' per review comments.
* 1) kubeadm.conf is created as part of kubeadm package install. Hence dropped explicit copy.
We believe that the supervisord issue in face of clock rolling backwards
has been addressed. Therefore reverting change 2598 to allow ntp sync
to right clock at the start up time.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
This patch upgrade the kernel from version
4.9.0-9-2 (4.9.168-1+deb9u3) to 4.9.0-11-2 (4.9.189-3+deb9u2)
Co-authored-by: rajendra-dendukuri <47423477+rajendra-dendukuri@users.noreply.github.com>
* Changes in sonic-buildimage for the NAT feature
- Docker for NAT
- installing the required tools iptables and conntrack for nat
Signed-off-by: kiran.kella@broadcom.com
* Add redis-tools dependencies in the docker nat compilation
* Addressed review comments
* add natsyncd to warm-boot finalizer list
* addressed review comments
* using swsscommon.DBConnector instead of swsssdk.SonicV2Connector
* Enable NAT application in docker-sonic-vs
* [initramfs] Updated reuired tools for initramfs
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Updated required tools for initramfs
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [Platform] [Marvell] Platform specific debian package for et6448m device
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Removed auto-generated files
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Added mtd and uboot firmware tools package required for arm arch
Its been enabled to all arch including amd64
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Added mtd and uboot firmware tools package required for arm arch
Its been enabled to all arch including amd64
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Marvell arm modules update and platform config update
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [iniramfs] add initramfs uboot-utils hook script only for ARM
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
When database service is down, psud daemon throws an error because of DB connection reset, this because pmon service has no dependency with database service.
To resolve this issue, added database service dependency to the pmon service.
Also, increased the net.core.somaxconn value to 512 to solve the connection failure on the scaled setup.
* ZTP infrastructure changes to support DHCP discovery provisioning data
- Dynamically generate DHCP client configuration based on current ZTP state
- Added support to request and process hostname when using DHCPv6
- Do not process graphservice url dhcp option if ZTP is enabled, ZTP service
will process it
- Generate /e/n/i file with all active interfaces seeking address assignment
via DHCP. Only interfaces that are created in Linux will be added to /e/n/i.
Also DHCP is started only on linked up in-band interfaces.
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
* In the event of a kernel crash, we need to gather as much information
as possible to understand and identify the root cause of the crash.
Currently, the kernel does not provide much information, which make
kernel crash investigation difficult and time consuming.
Fortunately, there is a way in the kernel to provide more information
in the case of a kernel crash. kdump is a feature of the Linux kernel
that creates crash dumps in the event of a kernel crash. This PR
will add kermel kdump support.
An extension to the CLI utilities config and show is provided to
configure and manage kdump:
- enable / disable kdump functionality
- configure kdump (how many kernel crash logs can be saved, memory
allocated for capture kernel)
- view kernel crash logs
* Makefile: ARM kernel support from sonic-linux-kernel
* Fix for multiarch build docker spawn
Platform: Install the DTB deb for the platform
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
This commit adds NTP support for management VRF using L3mdev. Config vrf add
mgmt will enable management VRF, enslave the eth0 device to the master device
mgmt, stop ntp service in default, restart interfaces-configs and restart ntp
service in mgmt-vrf context. Requirement and design are covered in mgmt vrf
design document.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
* [cron.d] Create cron job to periodically clean-up core files
* Create script to scan /var/core and clean-up older core files
* Create cron job to run clean-up script
Signed-off-by: Danny Allen <daall@microsoft.com>
* Update interval for running cron job
* Respond to feedback
* Change syslog id
- monit config broke by one monit upgrade
- abandon sed approach since it is suspestible to monit config changes
- use unixsocket instead of httpd due to a bug in 5.20.0
[build_debian] Generate checksum of ASIC config files
* Adds script to generate checksums for ASIC config files
* Adds step to build_debian that copies ASIC config checksum into SONiC filesystem
Signed-off-by: Danny Allen daall@microsoft.com
Docker version above 18 has inconsistent behaviour with qemu.
Hence using the same version 18 used in sonic-slave
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
ndisc6 gathers a few diagnostic tools for IPv6 networks including:
- ndisc6, which performs ICMPv6 Neighbor Discovery in userland,
- rdisc6, which performs ICMPv6 Router Discovery in userland,
- rltraceroute6, a UDP/ICMP IPv6 implementation of traceroute,
- tcptraceroute6, a TCP/IPv6-based traceroute implementation,
- tcpspray6, a TCP/IP Discard/Echo bandwidth meter,
- addrinfo, easy script interface for hostname and address resolution,
- dnssort, DNS sorting script.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [Makefile/slave docker] ARM arch doesn't support few packages
iproute2 is missing for ARM sonic-slave docker
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
ARM Architecture support in SONIC
make configure platform=[ASIC_VENDOR_ARCH] PLATFORM_ARCH=[ARM_ARCH]
SONIC_ARCH: default amd64
armhf - arm32bit
arm64 - arm64bit
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
This commit adds support for New feature management VRF using L3mdev. Added
commands to enable/disable management VRF. Config vrf add mgmt will enable
management VRF, enslave the eth0 device to the master device mgmt and restart
interfaces-configs in mgmt-vrf context.
management interface (eth0) can be configured using config interface eth0 ip
add command and removed using config interface eth0 ip remove command.
Requirement and design are covered in mgmt vrf design document. Currently show
command displays linux command output; will update show command display in next
PR after concluding what would be the output for the show commands. Added
metric for default routes in dhcp and static, any changes for metric will be
addressed subsequently after discussing.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
* Upgrade ifupdown2 to version 1.2.8
Required by ZTP to support ZTP over IPv6 transport
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
- What I did
Configure sshd to close all SSH connetions after 15 minutes of inactivity.
- How I did it
Set ClientAliveInterval to 900 (900 seconds = 15 minutes) and ClientAliveCountMax to 0
in /etc/ssh/sshd_config using augtool in build_debian.sh. In the process, I refactored the existing augtool command for sshd_config so as to add comments and empty lines to file for readability.
- How to verify it
Log into device via management port. Wait 15 minutes without sending a keystroke -- you should be automatically logged out.
* Added debug symbols to many debug dockers.
* For debug images *only*:
1) Archive source files into debug image
2) Archived source is copied into /src
3) Created an empty dir /debug
4) Mount both /src as ro & /debug as rw into every docker
5) Login banner will give some details on /src & /debug
6) Devs can copy core file into /debug and view it from inside a container.
7) Dev may create all gdb logs and other data directly into /debug.
* Dropped redundant REDIS_TOOLS per review comments.
* Added debug symbols to frr package and hence FRR based BGP docker.
* 1) Moved dbg_files.sh to scripts/
2) Src directories to archive are now collected from individual Makefiles.
3) Added few more debug symbols
4) Added few more debug dockers.
Here after no more changes except per review comments.
To debug:
Install required version of debug image in Switch or VM.
Copy core file into /debug of host
Get into Docker
gdb /usr/bin/<daemon> -c /debug/<your core file>
set directory /src/... <-- inside gdb to get the source
For non-in-depth debugging:
Download corresponding debug Docker image (docker-...-dbg.gz) to your VM
Load the image
Run image with entrypoint as 'bash' with dir containing core mapped in.
Run gdb on the core.
* [submodule] update sonic-linux-kernel
* update linux kernel version
* Fix many version strings
* update mellanox components (built with new kernel)
* [mlnx] add make files for SDK WJH libs
* Update arista driver submodule (#8)
Make the debian packaging point to a newer kernel version.
- What I did
Currently when the system is under memory pressure, the OOM killer kicks in and kills a rogue process. Killing a rogue process can cause the device to be un-healthy leading to blackholing of the traffic.
To avoid this, configure the OOM to do a kernel panic which will cause the device to reboot and come back up healthy.
- How I did it
Added the sysctl variable panic_on_oom and set the value to 2.
Setting it to 2 will ensure OOM killer to always do a kernel panic.
- Add ebtables package, and install some filter rules:
1. ebtables -A FORWARD -d BGA -j DROP
2. ebtables -A FORWARD -p ARP -j DROP
Basically, we let the ARP packets in the VLAN being forwarded by the ASIC,
kernel gets a copy of these ARP packets and the forwarding from Kenerl gets
dropped. So there is always only one copy of ARP/response in the VLAN.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
We are going to use initramfs hook for firmware upgrades
To install Arista hook:
- create folder /mnt/flash/<image dir>/platform/hooks/boot1/ from Aboot or
/host/<image dir>/platform/hooks/boot1/ from Sonic
- add executable script to created folder
* [build]: put stretch debian packages under target/debs/stretch/
* in stretch build phase, all debian packages built in that stage are placed under target/debs/stretch directory.
* for python-based debian packages, since they are really the same for jessie and stretch, they are placed under target/python-debs directory.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
When rebooting without the platform_reboot plugin, systemd takes a few
minutes to properly shutdown. It's blocking on some docker cleanup
operation.
As described by https://github.com/docker/for-linux/issues/421 there
is a race between docker.service and containerd.service.
docker needs containerd to properly stop the containers.
* [security kernel] Upgrade kernel from 4.9.110-3+deb9u2 to 4.9.110-3+deb9u6
short version: 4.9.0-7 to 4.9.0-8
See changelogs for security fixes:
https://tracker.debian.org/media/packages/l/linux/changelog-4.9.110-3deb9u6
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update sonic-linux-kernel submodule after it was merged
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* [baseimage] set default locale en_US.UTF-8
Signed-off-by: chenhu <chenhu@didichuxing.com>
* [baseimage]set default locale to en_US.UTF-8, clean all other unused
* [baseimage] update-locale after locale-gen
* correct update-locale command line
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [baseimage]: install picocom 3.1 in base image
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* add picocom to stretch build
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* fix slave.mk bug
Signed-off-by: Guohan Lu <gulv@microsoft.com>
stretch docker-engine in base image is not started by default
in the build process. Need to create empty /var/lib/docker
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* Fix potential blackholing/looping traffic and refresh ipv6 neighbor to avoid CPU hit
In case ipv6 global addresses were configured on L3 interfaces and used for peering,
and routing protocol was using link-local addresses on the same interfaces as prefered nexthops,
the link-local addresses could be aged out after a while due to no activities towards the link-local
addresses themselves. And when we receive new routes with the link-local nexthops, SONiC won't insert
them to the HW, and thus cause looping or blackholing traffic.
Global ipv6 addresses on L3 interfaces between switches are refreshed by BGP keeplive and other messages.
On server facing side, traffic may hit fowarding plane only, and no refresh for the ipv6 neighbor entries regularly.
This could age-out the linux kernel ipv6 neighbor entries, and HW neighbor table entries could be removed,
and thus traffic going to those neighbors would hit CPU, and cause traffic drop and temperary CPU high load.
Also, if link-local addresses were not learned, we may not get them at all later.
It is intended to fix all above issues.
Changes:
Add ndisc6 package in swss docker and use it for ipv6 ndp ping to update the neighbors' state on Vlan interfaces
Change the default ipv6 neighbor reachable timer to 30mins
Add periodical ipv6 multicast ping to ff02::11 to get/refresh link-local neighbor info.
* Fix review comments:
Add PORTCHANNEL_INTERFACE interface for ipv6 multicast ping
format issue
* Combine regular L3 interface and portchannel interface for looping
* Add ndisc6 package to vs docker
some platform drivers install blacklist.conf in /etc/modprobe.d.
Those configuration should be proprogated into initramfs to avoid
loading those blacklisted driver.
* [slave.mk]: Fix displaying username and password in build summary
We display contents of DEFAULT_USERNAME and DEFAULT_PASSWORD, while
image can be build with USERNAME and/or PASSWORD given on make(1)
command line. For example:
$ make USERNAME=adm PASSWORD=mypass target/sonic-broadcom.bin
Fix by displaying USERNAME and PASSWORD variables in build summary.
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co>
* [baseimage]: Improve default user account handling
There are couple of issues with current implementation of default
user account management in baseimage:
1) It uses DES to encrypt accounts password. Furthermore this
effectively limits password length to 8 symbols, even if more
provided with PASSWORD or DEFAULT_PASSWORD from rules/config.
2) Salt value for password is same on all builds even with different
password increasing attack surface.
3) During the build process password passed as command line parameter
either as plain text (if given to make(1) as "make PASSWORD=...")
or DES encrypted (if given to build_debian.sh) can be seen by
non-build users using /proc/<pid>/cmdline file that has group and
world readable permissions.
Both 1) and 2) come from:
perl -e 'print crypt("$(PASSWORD)", "salt"),"\n"')"
that by defalt uses DES if salt does not have format $<id>$<salt>$,
where <id> is hashing function id. See crypt(3) for more details on
valid <id> values.
To address issues above we propose following changes:
1) Do not create password by hands (e.g. using perl snippet above):
put this job to chpasswd(8) which is aware about system wide
password hashing policy specified in /etc/login.defs with
ENCRYPT_METHOD (by default it is SHA512 for Debian 8).
2) Now chpasswd(8) will take care about proper salt value.
3) This has two steps:
3.1) For compatibility reasons accept USERNAME and PASSWORD as
make(1) parameters, but warn user that this is unsafe.
3.2) Use process environment to pass USERNAME and PASSWORD variables
from Makefile to build_debian.sh as more secure alternative to
passing via command line parameters: /proc/<pid>/environ
readable only by user running process or privileged users like
root.
Before change:
--------------
hash1
-----
# u='admin'
# p="$(LANG=C perl -e 'print crypt("YourPaSs", "salt"),"\n"')"
^^^^^^^^
8 symbols
# echo "$u:$p" | chpasswd -e
# getent shadow admin
admin:sazQDkwgZPfSk:17680:0:99999:7:::
^^^^^^^^^^^^^
Note the hash (DES encrypted password)
hash2
-----
# u='admin'
# p="$(LANG=C perl -e 'print crypt("YourPaSsWoRd", "salt"),"\n"')"
^^^^^^^^^^^^
12 symbols
# echo "$u:$p" | chpasswd -e
# getent shadow admin
admin:sazQDkwgZPfSk:17680:0:99999:7:::
^^^^^^^^^^^^^
Hash is the same as for "YourPaSs"
After change:
-------------
hash1
-----
# echo "admin:YourPaSs" | chpasswd
# getent shadow admin
admin:$6$1Nho1jHC$T8YwK58FYToXMFuetQta7/XouAAN2q1IzWC3bdIg86woAs6WuTg\
^^^^^^^^
Note salt here
ksLO3oyQInax/wNVq.N4de6dyWZDsCAvsZ1:17681:0:99999:7:::
hash2
-----
# echo "admin:YourPaSs" | chpasswd
# getent shadow admin
admin:$6$yKU5g7BO$kdT02Z1wHXhr1VCniKkZbLaMPZXK0WSSVGhSLGrNhsrsVxCJ.D9\
^^^^^^^^
Here salt completely different from case above
plFpd8ksGNpw/Vb92hvgYyCL2i5cfI8QEY/:17681:0:99999:7:::
Since salt is different hashes for same password different too.
hash1
-----
# LANG=C perl -e 'print crypt("YourPaSs", "\$6\$salt\$"),"\n"'
^^^^^
We want SHA512 hash
$6$salt$qkwPvXqUeGpexO1vatnIQFAreOTXs6rnDX.OI.Sz2rcy51JrO8dFc9aGv82bB\
yd2ELrIMJ.FQLNjgSD0nNha7/
hash2
-----
# LANG=C perl -e 'print crypt("YourPaSsWoRd", "\$6\$salt\$"),"\n"'
$6$salt$1JVndGzyy/dj7PaXo6hNcttlQoZe23ob8GWYWxVGEiGOlh6sofbaIvwl6Ho7N\
kYDI8zwRumRwga/A29nHm4mZ1
Now with same "salt" and $<id>$, and same 8 symbol prefix in password, but
different password length we have different hashes.
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co>
* Support OS9 -> SONiC fast-reboot migration
* Address review comments. Update NOS mac in EEPROM and net.rules for eth0
* Address review comments. Update sonic-platform-modules-dell to fac81d...
* Fix script for POSIX compliance
* Reduce SONiC migration partition from 8G to 1G.
* Changes to create 1G partition with ability to resize post migration.
* Remove redundant changes in varlog
* Use findfs to interpret root. Move resize in case cmdline params are reordered
* Upgrade linux-image version
* Add missing dependency of igb
* Fix mft build rule
* Add missing dependency of ixgbe
* [Broadcom]: Update OpenNSL modules to be compatible with kernel 3.16.0-5 (#3)
* [Nephos] Update SDK version to support new kernel module 3.16.0-5 (#4)
* [mellanox]: Update URL for SDK (#5)
* Add switch ASIC vendor and platforms for Nephos
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* Advance sonic-sairedis submodule to include #271 (Add Nephos ASIC)
* Framework to plugin Organization specific scripts
* Framework to plugin Organization specific scripts
* Framework to plugin Organization specific scripts
* add getopt option to organization script
moving to initramfs unifies disk allocate on different platforms.
use fallocate instead of dd to speed up the disk allocation.
By default, mkfs.ext4 has -E discard option which discards the blocks
at the mkfs time, also speed up the initialization time.
* [core dump] pass unix time to coredump-compress script
Currently we only have program name (e.g. bgpd) and PID in the core file
name. PID could collide especially after docker restart or recreate.
Passing the unix time to coredump-compress so it could also add time to
the core file name.
* [utilities] include the change to coredump_compress script
* [quagga] enable core dump for bgpd and zebra
bgpd and zebra downgrade their privilege shortly after started. For that
sysctrl kernel.suid_dumpable needs to be set to 2, so that they can dump
core.
Note that fs.suid_dumpable SHOULD NOT be set to 1. Which will bypass all
system security.
* Add monit for disk>85% into pmon docker
* Revert "Add monit for disk>85% into pmon docker"
This reverts commit 9cbbf591c08bce4b52a0f68cbbddae102d7fc614.
* Install monit in base image
* [build]: Include SONiC version into installer.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Append dirty if contains local changes
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Update config
* Use correct name for kernel version field
* Update sysDescription.j2
- Create /var/run/redis/ folder on the host
- Install Python client for Redis on the host
- Mount /var/run/redis/ as read/write from host for all dockers
- Enable accessing the database everywhere including on the host and from remote
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
The reason is that /etc/network/interfaces file is in base image. After booting,
docker-swss is not ready and thus the empty VLAN interfaces cannot be created
when the brctl is pointing to the binary inside the swss docker.
Add the bridge-utils into the base image and add bridge_ports none to the
/etc/network/interfaces file so that after boot-up the empty VLAN interfaces
will be created to let the members to join later.
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
- Add a functionality to get SNMP community from DHCP (option 224)
- Add a functionality to get minigraph from http service instead of using default minigraph
- The url for graph service is passed through DHCP option 225
- This feature is by default disabled. Modify rule/config to enable it on build time, or modify /etc/sonic/graph_service_url on run time.
- Fix a bug that getting hostname from DHCP is not working correctly
* Single image
* Fix review comments
* Update syncd service. Add HW mgmt to Mellanox single image.
* Add single image template for Broadcom platform.
SKU should be provided during configure:
make configure PLATFORM=broadcom SKU=Force10-S6000
* Add single image template for Cavium platform.
SKU should be provided during configure:
make configure PLATFORM=cavium SKU=AS7512
* Add description to sonic_debian_extension.j2 file.
This commit will convert the existing file system of flash drive on Arista switches from VFAT to EXT4 in the booting of SONiC. It will take the whole flash and therefore remove the recovery partition. There is a check in the script making sure that the conversion operation will not happen on a non-Arista switch or if the existing file system is not VFAT.
