show ip interfaces is enhanced recently to support multi ASIC platforms in this PR- https://github.com/Azure/sonic-utilities/pull/1396 .
The ipintutil script as to run as sudo user, to get the ip interface from each namespace.
Add this script to the sudoer file so that show ip interface command is available for user with read-only permissions
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
The pcie configuration file location is under plugin directory not under platform directory.
#6437
- How I did it
Move all pcie.yaml configuration file from plugin to platform directory.
Remove unnecessary timer to start pcie-check.service
Move pcie-check.service to sonic-host-services
- How to verify it
Verify on the device
- Add support for `DCS-7050SX3-48YC8` and `DCS-7050SX3-48C8` platform
- Add support for more variants of `DCS-7280CR3-32[PD]4`
- Add Supervisor to Linecard consutil support
- Complete Watchdog platform API support
- Fix some PSU behavior on `DCS-7050QX-32` and `DCS-7060CX-32S`
- Fix SEU management on `DCS-7060CX-32S`
- Allow kernel modules to build up to linux 5.10
- Rename led color `orange` to `amber`
- Miscellaneous fixes
Update topology script to retrieve hwsku from minigraph
if hwsku information is not available in config_db.
Fix clean up of interfaces in msft_multi_asic_vs hwsku
topology script.
- Why I did it
When bringing up multi-asic VS switch, topology service is started during boot up.
Topology service starts a shell script which runs the topology script present in /usr/share/sonic/device// directory. To invoke hwsku specific script, the topology script tries to retrieve hwsku information from config_db.
During initial boot up config_db might not be populated. In order to start topology service before config_db is updated,
update topology script to get hwsku information from minigraph.xml if it is available.
This will be helpful to bring up multi-asic VS testbed by loading minigraph and starting topology service.
- How I did it
Update topology.sh script to retrieve hwsku information from minigraph.xml.
Fix clean up function on msft_multi_asic_vs toplogy script.
- How to verify it
single-asic VS - no change; topology service is only enabled for multi-asic VS.
multi-asic VS - Bring up multi-asic VS image, copy minigraph to vs image, start topology service. Topology service should be successful.
to test clean up function fix, start topology service - make sure interfaces are created and moved to the right namespaces.
stop topology service - make sure namespace do not have any interface and all front end interfaces are present in default namespace.
- What I did
All SWSS dependent services should stop before SWSS service to avoid future possible issues.
For example 'teamd' service will stop before to allow the driver unload netdev gracefully.
This is to stop all LAG's before restarting syncd service when running 'config reload' command.
- How I did it
Change the order of dependent services of SWSS.
- How to verify it
Run 'config reload' command.
Previously the operation failed when a large number of PortChannel configured on the system.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* Add *MUX_CABLE_TABLE* to set of tables to clear on SWSS start, which
will clear HW_MUX_CABLE_TABLE and MUX_CABLE_TABLE
* Order swss to start before pmon to ensure that DBs are cleared before
xcvrd (running inside pmon) starts and re-populates the tables
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Fix marvell-armhf build break
The azure-storage package depends on the cryptography package. Newer
versions of cryptography require the rust compiler, the correct version
for which is not readily available in buster. Hence we pre-install an
older version here to satisfy the azure-storage dependency.
Note: This is not a problem for other architectures as pre-built versions
of cryptography are available for those. This sequence can be removed
after upgrading to debian bullseye.
**- Why I did it**
To support FW upgrade on init.
**- How I did it**
Change timeout value
**- How to verify it**
I manually changed ASIC and Gearbox FW followed by hard reset in order for FW upgrade to take place on init.
Signed-off-by: liora <liora@nvidia.com>
- Why I did it
To move ‘sonic-host-service’ which is currently built as a separate package to ‘sonic-host-services' package.
- How I did it
- Moved 'sonic-host-server' to 'src/sonic-host-services' and included it as part of the python3 wheel.
- Other files were moved to 'src/sonic-host-services-data' and included as part of the deb package.
- Changed build option ‘INCLUDE_HOST_SERVICE’ to ‘ENABLE_HOST_SERVICE_ON_START’ for enabling sonic-hostservice at boot-up by default.
[multi_asic][vs]: Add dependency in teamd service to start after topology service.
- Why I did it
In multi-asic VS, topology service is run after database service to set up the internal asic topology.
swss and syncd have a dependency to start after topology service is run so that the interfaces are moved to right namespace and created in the right namespace. In case of multi-asic vs, during the initial boot up, when there is no configuration added, teamd service starts and swss/syncd do not start as topology service does not start. Upon loading configuration using config_db or minigraph, swss and sycnd start up , but teamd is not restarted as swss is not stopped and started. This causes teamd to be in a bad state and requires a reload of config.
- How I did it
Add dependency in teamd service to start after topology service is completed.
- How to verify it
No change in single asic vs or platform.
No change in multi-asic regular image.
Change only in multi-asic VS. Bring up a multi-asic VS image without any configration, teamd service will fail to start due to dependency failure. Load minigraph, start topology service, load configuration, ensure all services come up.
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
- Why I did it
As of Azure/sonic-utilities#1297, subcommands of pcieutil have changed to remove the redundant pcie- prefix. This PR adapts calling applications (pcie-check) to the new syntax.
Resolves#6676
- How I did it
Remove pcie- prefix from pcieutil subcommands in calling applications
Also add pcieutil * to sudoers file, as pcieutil requires elevated permissions
A few issues where discovered with crashkernel on Arista platforms.
1) platforms using `docker_inram=on` would end up OOM in kdump environment.
This happens because the same initramfs is used by SONiC and the crashkernel.
With `docker_inram=on` the `dockerfs.tar.gz` is extracted in a `tmpfs` created for the occasion.
Since `dockerfs.tar.gz` weights more than 1.5G, it doesn't fit into the kdump environment and ends up OOM.
This OOM event can in turn trigger a panic.
2) Arista platforms with `secureboot` enabled would fail to load the crashkernel because the kernel parameter would be discarded on boot.
This happens because the `boot0` in secureboot mode is strict about kernel parameter injection.
3) The secureboot path allowlist would remove kernel crash reports.
4) The kdump service would fail on Arista products since `/boot/` is empty in `secureboot`
**- How I did it**
1) To prevent an OOM event in the crashkernel the fix is to avoid the codepaths in `union-mount` that create tmpfs and populate them. Some more codepath specific to Arista devices are also skipped to make the kdump process faster.
This relies on detecting that the initramfs is starting in a kdump environment and skipping some initialization.
The `/usr/sbin/kdump-config` tool appends a few kernel cmdline arguments when loading the crashkernel.
The most unique one is `systemd.unit=kdump-tools.service` which is used in a few initramfs hooks to set `in_kdump`.
2) To allow `kdump` to work in `secureboot` environment the cmdline generation in boot0 was slightly modified.
The codepath to load kernel parameters changed by SONiC is now running for booting in secure mode.
It was altered to prevent an append only behavior which would grow the `kernel-cmdline` at every reboot.
This ever growing behavior would lead `kexec` to fail to load the kernel due to a too long cmdline.
3) To get the kernel crash under /var/crash this path has to be added to `allowlist_paths`
4) The `/host/image-XXX/boot` folder is now populated in `secureboot` mode but not used.
**- How to verify it**
Regular boot:
- enable kdump
- enable docker_inram=on via kernel-params
- reboot
- generate a crash `echo c > /proc/sysrq-trigger`
- before: witness OOM events on the console
- after: crash kernel works and crash available under /var/crash
Secure boot:
- enable kdump
- reboot
- generate a crash `echo c > /proc/sysrq-trigger`
- before: witness no kdump
- after: crash kernel works and crash available under /var/crash
Co-authored-by: Boyang Yu <byu@arista.com>
fixesAzure/sonic-utilities#1389
With the recent changes in sudoer files. The show commands fails for the read-only users.
The problem here is the 'docker ps' is failing in the function [get_routing_stack()](8a1109ed30/show/main.py (L54)) therefore all the CLI commands are failing.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
The command sudo ip netns identify <pid> is used in function get_current_namespace
to check in the cli command is running in host context or within a namespace.
This function is used for every CLI command and command sudo ip netns identify <pid> needs to be added in sudoer files to allow users with RO access to run show cli commands
This problem is not there on single asic platforms.
- How I did it
Add ip netns identify [0-9]* to sudoers file.
Following changes were done for ebtables:
- Support for Multi-asic platforms. Ebtable filters are installed in namespace for multi-asic and not host. On Single asic installed on host.
- For Multi-asic platforms we don't want to install on host otherwise Namespace-to-Namespace communication does not happens since ARP Request are not forwarded.
- Updated to use text file to restore ebtables rules then the binary format. Rules are restore as part of Database docker init instead of rc.local
- Removed the ebtable service files for buster as not needed as filters are restored/installed as part of database docker init.
All the binaries are pre-installed with ebtables* binary are same as ebatbles-legacy-*
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
The Portchannels were not getting cleaned up as the cleanup activity was taking more than 10 secs which is default docker timeout after which a SIGKILL will be send.
Fixes#6199
To check if it works out for this issue in 201911 ? #6503
This issue is significantly seen in master branch compared to 201911 because the Portchannel cleanup takes more time in master. Test on a DUT with 8 Port Channels.
master
admin@str-s6000-acs-8:~$ time sudo systemctl stop teamd
real 0m15.599s
user 0m0.061s
sys 0m0.038s
Sonic 201911.v58
admin@str-s6000-acs-8:~$ time sudo systemctl stop teamd
real 0m5.541s
user 0m0.020s
sys 0m0.028s
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
- Why I did it
This PR has the changes to support having different swss.rec and sairedis.rec for each asic.
The logrotate script is updated as well
- How I did it
Update the orchagent.sh script to use the logfile name options in these PRs(Azure/sonic-swss#1546 and Azure/sonic-sairedis#747)
In multi asic platforms the record files will be different for each asic, with the format swss.asic{x}.rec and sairedis.asic{x}.rec
Update the logrotate script for multiasic platform .
- Why I did it
Initially, we used Monit to monitor critical processes in each container. If one of critical processes was not running
or crashed due to some reasons, then Monit will write an alerting message into syslog periodically. If we add a new process
in a container, the corresponding Monti configuration file will also need to update. It is a little hard for maintenance.
Currently we employed event listener of Supervisod to do this monitoring. Since processes in each container are managed by
Supervisord, we can only focus on the logic of monitoring.
- How I did it
We borrowed the event listener of Supervisord to monitor critical processes in containers. The event listener will take
following steps if it was notified one of critical processes exited unexpectedly:
The event listener will first check whether the auto-restart mechanism was enabled for this container or not. If auto-restart mechanism was enabled, event listener will kill the Supervisord process, which should cause the container to exit and subsequently get restarted.
If auto-restart mechanism was not enabled for this contianer, the event listener will enter a loop which will first sleep 1 minute and then check whether the process is running. If yes, the event listener exits. If no, an alerting message will be written into syslog.
- How to verify it
First, we need checked whether the auto-restart mechanism of a container was enabled or not by running the command show feature status. If enabled, one critical process should be selected and killed manually, then we need check whether the container will be restarted or not.
Second, we can disable the auto-restart mechanism if it was enabled at step 1 by running the commnad sudo config feature autorestart <container_name> disabled. Then one critical process should be selected and killed. After that, we will see the alerting message which will appear in the syslog every 1 minute.
- Which release branch to backport (provide reason below if selected)
201811
201911
[x ] 202006
* [warm boot finalizer] only wait for enabled components to reconcile
Define the component with its associated service. Only wait for components that have associated service enabled to reconcile during warm reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
**- Why I did it**
This PR aims to monitor the running status of each container. Currently the auto-restart feature was enabled. If a critical process exited unexpected, the container will be restarted. If the container was restarted 3 times during 20 minutes, then it will not run anymore unless we cleared the flag using the command `sudo systemctl reset-failed <container_name>` manually.
**- How I did it**
We will employ Monit to monitor a script. This script will generate the expected running container list and compare it with the current running containers. If there are containers which were expected to run but were not running, then an alerting message will be written into syslog.
**- How to verify it**
I tested this feature on a lab device `str-a7050-acs-3` which has single ASIC and `str2-n3164-acs-3` which has a Multi-ASIC. First I manually stopped a container by running the command `sudo systemctl stop <container_name>`, then I checked whether there was an alerting message in the syslog.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
In scenario where upgrade gets config from minigraph, it could miss tacacs credentials as they are not in minigraph. Hence restore explicitly upon load-minigraph, if present.
- Why I did it
Upon boot, when config migration is required, the switch could load config from minigraph. The config-load from minigraph would wipe off TACACS key and disable login via TACACS, which would disable all remote user access. This change, would re-configure the TACACS if there is a saved copy available.
- How I did it
When config is loaded from minigraph, look for a TACACS credentials back up (tacacs.json) under /etc/sonic/old_config. If present, load the credentials into running config, before config-save is called.
- How to verify it
Remove /etc/sonic/config_db.json and do an image update. Upon reboot, w/o this change, you would not be able ssh in as remote user. You may login as admin and check out, "show tacacs" & "show aaa" to verify that tacacs-key is missing and login is not enabled for tacacs.
With this change applied, remove /etc/sonic/config_db.json, but save tacacs & aaa credentials as tacacs.json in /etc/sonic/. Upon reboot, you should see remote user access possible.
- Make PDDF code compliant with both Python 2 and Python 3
- Align code with PEP8 standards using autopep8
- Build and install both Python 2 and Python 3 PDDF packages
swss/teamd/syncd services were changed to always enabled
in commit fad481edc1 as a workaround
for not letting hostcfgd start service during the bootup process.
commit 317a4b3410 introduce
wait till full system bootup before updating feature states in hostcfgd.
Thus, workaround introduced in commit fad481ed can be removed
Signed-off-by: Guohan Lu <lguohan@gmail.com>
To limit IO and space usage on the flash device the boot0 script makes sure the SWI is in memory.
Because SONiC maps /tmp on the flash, some logic is required to make sure of it.
However it is possible for some provisioning mechanism to already download the swi in a memory file system.
This case was not handled properly by the boot0 script.
It now detect if the image is on a tmpfs or a ramfs and keep it there if that is the case.
The cleanup method has been updated accordingly and will only cleanup
the mount path if it's below /tmp/ as to not affect user mounted paths.
- How I did it
Check the filesystem on which the SWI pointed by swipath lies.
If this filesystem is a ramfs or a tmpfs the move_swi_to_tmpfs becomes a no-op.
Made sure the cleanup logic would not behave unexpectedly.
- How to verify it
In SONiC:
Download the swi under /tmp and makes sure it gets moved to /tmp/tmp-swi which gets mounted for that purpose.
Make sure /tmp/tmp-swi gets unmounted once the install process is done.
Create a new mountpoint under /ram using either ramfs or tmpfs and download the swi there.
Install the swi using sonic-installer and makes sure the image doesn't get moved by looking at the logs.
Signed-off-by: Prabhu Sreenivasan prabhu.sreenivasan@broadcom
What I did
Added support for snat, dnat and ipmc resources under CRM module.
How I did it
New feature NAT adds new resources snat_enty and dnat_entry that needs to be monitored. ipmc_entry tracks IP multicast resources used by switch.
How to verify it
sonic-utilities tests and crm spytest
* First cut image update for kubernetes support.
With this,
1) dockers dhcp_relay, lldp, pmon, radv, snmp, telemetry are enabled
for kube management
init_cfg.json configure set_owner as kube for these
2) Each docker's start.sh updated to call container_startup.py to register going up
As part of this call, it registers the current owner as local/kube and its version
The images are built with its version ingrained into image during build
3) Update all docker's bash script to call 'container start/stop/wait' instead of 'docker start/stop/wait'.
For all locally managed containers, it calls docker commands, hence no change for locally managed.
4) Introduced a new ctrmgrd service, that helps with transition between owners as kube & local and carry over any labels update from STATE-DB to API server
5) hostcfgd updated to handle owner change
6) Reboot scripts are updatd to tag kube running images as local, so upon reboot they run the same image.
7) Added kube_commands.py to handle all updates with Kubernetes API serrver -- dedicated for k8s interaction only.
Added source interface support for NTP.
Also made NTP start on Mgmt-VRF by default when configured.
**- How I did it**
1) Updated hostcfg to listen to global config NTP and NTP_SERVER tables and restart ntp when ever the configuration changes. NTP table includes source interface configuration.
2) The ntp script updated to by default start on Mgmt-VFT when configured.
Signed-off-by: Prabhu Sreenivasan <prabhu.sreenivasan@broadcom>
Certain platform specific packages sonic-platform-xyz, installs files onto rootfs, which would be placed on read-write mount path on /host/image-name/rw/...
when ntpd starts it tries to do read access on /usr/bin /usr/sbin/ /usr/local/bin , which inturn links further to the read-write mount path also.
Where ntpd would get below Apparmor Warning message
LOG:-
audit: type=1400 audit(1606226503.240:21): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/image-HEAD-dirty-20201111.173951/rw/usr/local/bin/" pid=3733 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1606226503.240:22): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/image-HEAD-dirty-20201111.173951/rw/usr/sbin/" pid=3733 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1606226503.240:23): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/image-HEAD-dirty-20201111.173951/rw/usr/bin/" pid=3733 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Fix:
Add rw/.. mount path similar to root path access provided for ntpd in /etc/apparmor.d/usr.sbin.ntpd
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Fixes#5663
- Why I did it
It's currently possible for the SNMP timer to conflict with config reload (specifically if the timer triggers while config reload is stopping the SWSS service). config reload triggers SWSS to shutdown, which causes SNMP to shutdown, which conflicts with the SNMP timer causing SNMP to startup. See the linked issue for more details.
- How I did it
Including the After ordering dependency forces the SNMP timer to wait until SWSS finishes stopping, preventing the conflict. If there is an ordering dependency between two units (e.g. one unit is ordered After another), if one unit is shutting down while the other is starting up, the shutdown will always be ordered before the startup. In this case, that means that the SNMP timer is forced to wait for the SWSS shutdown to complete. Only then can the SNMP timer proceed. See here for more details.
It's important to note that the After dependency will not cause SWSS to be started when the SNMP timer fires (assuming that SWSS has not yet been started). The existing Requisite dependency in the SNMP service will also not cause SWSS to be started, instead it will cause the SNMP service to fail if SWSS is not active.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Install the 'wheel' package in host OS (along with python3 and python3-distutils which are also needed for building some Python packages) to eliminate error messages like the following:
```
Running setup.py bdist_wheel for watchdog: started
Running setup.py bdist_wheel for watchdog: finished with status 'error'
Complete output from command /usr/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-Qd3K08/watchdog/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/pip-wheel-0AHpMe --python-tag cp27:
usage: -c [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: -c --help [cmd1 cmd2 ...]
or: -c --help-commands
or: -c cmd --help
error: invalid command 'bdist_wheel'
----------------------------------------
Failed building wheel for watchdog
```
These error messages appear to have no impact on the image build, because the Python package seems to still get installed successfully afterward, just the building of a wheel package fails. Therefore, this is more of a cosmetic fix than an actual bug.
This is an addendum to https://github.com/Azure/sonic-buildimage/pull/6182.
Also upgrade pip and install more recent version of setuptools package via PyPI.
HLD: Azure/SONiC#646
In modular chassis, add CHASSIS_STATE_DB on control card
Why I did it
Modular Chassis has control-cards, line-cards and fabric-cards along with other peripherals. Control-Card CHASSIS_STATE_DB will be the central DB to maintain any state information of cards that is accessible to control-card/
How I did it
Adding another DB on an existing REDIS instance running on port 6380.
Create new file to "sysctl.d" with desired panic conditions.
It will trigger a vmcore dump using kdump-tools on these situations.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
The default /etc/default/kdump-tools file provided by the kdump-tools
package doesn't set a value for KDUMP_CMDLINE_APPEND.
The default kdump command line arguments need to be set in order
to extend them to use additional arguments required for SONiC
platforms.
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
libxslt-dev and libz-dev are dependencies for lxml==4.6.1 which is required for pyangbind==0.8.1
lxml-4.6.2-cp37-cp37m-manylinux1_x86_64.whl is directly downloaded in amd64 whereas in arm this is built from lxml-4.6.2.tar.gz
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
**- Why I did it**
To support dynamic buffer calculation.
This PR also depends on the following PRs for sub modules
- [sonic-swss: [buffermgr/bufferorch] Support dynamic buffer calculation #1338](https://github.com/Azure/sonic-swss/pull/1338)
- [sonic-swss-common: Dynamic buffer calculation #361](https://github.com/Azure/sonic-swss-common/pull/361)
- [sonic-utilities: Support dynamic buffer calculation #973](https://github.com/Azure/sonic-utilities/pull/973)
**- How I did it**
1. Introduce field `buffer_model` in `DEVICE_METADATA|localhost` to represent which buffer model is running in the system currently:
- `dynamic` for the dynamic buffer calculation model
- `traditional` for the traditional model in which the `pg_profile_lookup.ini` is used
2. Add the tables required for the feature:
- ASIC_TABLE in platform/\<vendor\>/asic_table.j2
- PERIPHERAL_TABLE in platform/\<vendor\>/peripheral_table.j2
- PORT_PERIPHERAL_TABLE on a per-platform basis in device/\<vendor\>/\<platform\>/port_peripheral_config.j2 for each platform with gearbox installed.
- DEFAULT_LOSSLESS_BUFFER_PARAMETER and LOSSLESS_TRAFFIC_PATTERN in files/build_templates/buffers_config.j2
- Add lossless PGs (3-4) for each port in files/build_templates/buffers_config.j2
3. Copy the newly introduced j2 files into the image and rendering them when the system starts
4. Update the CLI options for buffermgrd so that it can start with dynamic mode
5. Fetches the ASIC vendor name in orchagent:
- fetch the vendor name when creates the docker and pass it as a docker environment variable
- `buffermgrd` can use this passed-in variable
6. Clear buffer related tables from STATE_DB when swss docker starts
7. Update the src/sonic-config-engine/tests/sample_output/buffers-dell6100.json according to the buffer_config.j2
8. Remove buffer pool sizes for ingress pools and egress_lossy_pool
Update the buffer settings for dynamic buffer calculation
python2 is end of life and SONiC is going to support python3. This PR is going to support:
1. Mellanox SONiC platform API python3 support
2. Install both python2 and python3 verson of Mellanox SONiC platform API or pmon and host side
ntp-systemd-wrapper file from files/image_config/ntp was not getting picked up. Added a line on sonic_debian_extension.j2 to copy over the file from files/image_config/ntp after installing the debian package.
Signed-off-by: Prabhu Sreenivasan <prabhu.sreenivasan@broadcom.com>
- Why I did it
Move frr logs from syslog from the directory /var/log/quagga/.log to /var/log/frr/log
- How I did it
Updated the rsyslog config files.
- How to verify it
Verified the logs come into the file zebra.log and bgpd.log in the DIR /var/log/frr/log
- Allow platform specific reboot script to be called after crash kernel has
finished copying the kernel vmcore
- Disable pcie advanced features when running crash kernel. This improves
reliability of the crash kernel to successfully create a vmcore and also
reboot
- Allow crash kernel to reboot if a panic is seen while it is generating a
vmcore
- Fix crash kernel to use the SONiC specific /usr/local/bin/reboot script
instead of the Linux reboot command /sbin/reboot
- Use sonic_platform as the kernel command line parameter to pass platform identifier string
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
In order to install a SONiC image on top of a NVMe SSD disc properly with ONIE we must configure it properly on the installer.sh script.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
- Enhance eeprom parsing robustness on corrupted fields
- Add chassis provisioning service
- Disable CPU sleep state on some systems
- Complete refactor for FanSlots
- Fix module unload while still in use
