Enable dbgsym package for dhcpmon.
Allow CFLAGS and LDFLAGS from environment variables to be used
in the dhcp6relay build. This makes sure that the -O2 flag from
dpkg-buildflags gets used.
Finally, enable all hardening flags in dpkg-buildflags for
dhcp6relay and dhcpmon. The change from the default set of flags is that
during linking, immediate binding of symbols is done instead of lazy
binding.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [y_cable] Support for initialization of new Daemon ycable to support
ycables
This PR also adds the commit in sonic-platform-daemons
94fa239 [y_cable] refactor y_cable to a seperate logic and new daemon from xcvrd (#219)
Why I did it
This PR separates the logic of Y-Cable from xcvrd. Before this change we were utilizing xcvrd daemon to control all aspects of Y-Cable right from initialization to processing requests from other entities like orch,linkmgr.
Now we would have another daemon ycabled which will serve this purpose.
Logically everything still remains the same from the perspective of other daemons.
it also take care aspects like init/delete daemon from Y-Cable perspective.
How I did it
To serve the purpose we build a new wheel sonic_ycabled-1.0-py3-none-any.whl and install it inside pmon.
We also initalize the daemon ycabled which serves our purpose for refactor inside pmon
How to verify it
Ran the changes with an image for dualtor tests on a 7050cx3 platform
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Need to be able to run smartctl when pmon docker is not running.
How I did it
Removed the pmon dependency for pmon as well as the command wrapper and added it to the debian-extension.
How to verify it
Stop pmon
Run smartctl from the host and verify it runs without error
As part of this, update the isc-dhcp package to match the Bullseye
version (this fixes some compile errors related to BIND), clean up some
of the build dependencies and runtime dependencies for debian packaging,
and use the default Boost version to compile against instead of
explicitly saying using 1.74.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Improve the Linux kernel build cache hit rate.
Current the the hit rate is around 85.8% (based on the last 3 month, 3479 PR builds totally, 494 PR build not hit).
We can improve the hit rate up to 95% or better.
The Linux kernel build will take really long time, most of the PRs are nothing to do with the kernel change. The remaining cache options should be enough to detect the Linux kernel cache status (dirty or not).
Correct thrift.0.13.0 dependent package name.
In previous code, the buildout target was named as PYTHON3_THRIFT_0_13_0
But when add the prackage to LIBTHRIFT_0_13_0, it typo as PYTHON_THRIFT_0_13_0
- Add INCLUDE_PINS to config to enable/disable container
- Add Docker files and supporting resources
- Add sonic-pins submodule and associated make files
Submission containing materials of a third party:
Copyright Google LLC; Licensed under Apache 2.0
#### Why I did it
Adds P4RT container to SONiC for PINS
The P4RT app is covered by this HLD:
https://github.com/pins/SONiC/blob/master/doc/pins/p4rt_app_hld.md
#### How I did it
Followed the pattern and templates used for other SONiC applications
#### How to verify it
Build SONiC with INCLUDE_P4RT set to "y".
Verify that the resulting build has a container called "p4rt" running.
You can verify that the service is up by running the following command on the SONiC switch:
```bash
sudo netstat -lpnt | grep p4rt
```
You should see the service listening on TCP port 9559.
#### Which release branch to backport (provide reason below if selected)
None
#### Description for the changelog
Build P4RT container for PINS
Bring in the following commit:
405f1df Use build profiles instead of distro version for Python 2 binding build (#558)
This change requires a corresponding change in this repo to set a build
profile to not build the python 2 bindings on Bullseye.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This pull request integrate audisp-tacplus to SONiC for per-command accounting.
#### Why I did it
To support TACACS per-command accounting, we integrate audisp-tacplus project to sonic.
#### How I did it
1. Add auditd service to SONiC
2. Port and patch audisp-tacplus to SONiC
#### How to verify it
UT with CUnit to cover all new code in usersecret-filter.c
Also pass all current UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add audisp-tacplus for per-command accounting.
#### A picture of a cute animal (not mandatory but encouraged)
* Add macsec-xpn-support iproute2 in syncd
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Polish code
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Remove useless files
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Add self-compiled iproute2 to docker sonic vs
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Enhance apt install for iproute2 dependencies
Signed-off-by: Ze Gan <ganze718@gmail.com>
HLD updated here: https://github.com/Azure/SONiC/pull/887
#### Why I did it
Command `monit summary -B` can no longer display the status for each critical process, system-health should not depend on it and need find a way to monitor the status of critical processes. The PR is to address that. monit is still used by system-health to do file system check as well as customize check.
#### How I did it
1. Get container names from FEATURE table
2. For each container, collect critical process names from file critical_processes
3. Use “docker exec -it <container_name> bash -c ‘supervisorctl status’” to get processes status inside container, parse the output and check if any critical processes exit
#### How to verify it
1. Add unit test case to cover it
2. Adjust sonic-mgmt cases to cover it
3. Manual test
#### Why I did it
Changes required for feature "Event Driven TechSupport Invocation & CoreDump Mgmt". [HLD](https://github.com/Azure/SONiC/pull/818 )
Requires: https://github.com/Azure/sonic-utilities/pull/1796.
Merging in any order would be fine.
Summary of the changes:
- Added the YANG Models for the new tables introduces as a part of this feature.
- Enhanced init_cfg.json with the default config required
- Added a compile Time flag which enables/disables the config required for this feature inside the init_cfg.json
- Enhanced the supervisor-proc-exit-listener script to populate `<feature>:<critical_proc> = <comm>:<pid>` info in the STATE_DB when it observes an proc exit notification for the critical processes running inside the docker.
This pull request add a bash plugin for TACACS+ per-command authorization
#### Why I did it
1. To support TACACS per command authorization, we check user command before execute it.
2. Fix libtacsupport.so can't parse tacplus_nss.conf correctly issue:
Support debug=on setting.
Support put server address and secret in same row.
3. Fix the parse_config_file method not reset server list before parse config file issue.
#### How I did it
The bash plugin will be called before every user command, and check user command with remote TACACS+ server for per-command authorization.
#### How to verify it
UT with CUnit cover all code in this plugin.
Also pass all current UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add Bash TACACS+ plugin.
#### A picture of a cute animal (not mandatory but encouraged)
Debian actually did a binNMU for snmpd, so to match the package version
we're building with the version in the offiical repos, that version
needs to be manually specified in the changelog.
Buster still needs 5.7.3, because there's a ABI change between 5.7.3 and
5.9 for libsnmp, so for Buster, make sure that 5.7.3 is built, and for
Bullseye, make sure that 5.9 is built.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Remove Python 2 package installation from the base image. For container
builds, reference Python 2 packages only if we're not building for
Bullseye.
For libyang, don't build Python 2 bindings at all, since they don't seem
to be used.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
All docker containers will be built as Buster containers, from a Buster
slave. The base image and remaining packages that are installed onto the
host system will be built for Bullseye, from a Bullseye slave.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
The dhcp6relay rules file had a line overwriting a variable for
docker-dhcp-relay. Remove that line.
This line caused a limited impact where if some (many?) of the docker
containers were already built, except for dhcp-relay, and the build
failed or was interrupted, then dhcp-relay container would fail to build
because this variable was overwritten and the python3-swsscommon
wouldn't get installed into the slave container. Most builds would be
fine, though.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
In case an app.ext requires a dependency syncd^1.0.0, the RPC version of syncd will not satisfy this constraint, since 1.0.0-rpc < 1.0.0. This is not correct to put 'rpc' as a prerelease identifier. Instead put 'rpc' as build metadata in the version: 1.0.0+rpc which satisfies the constraint ^1.0.0.
- How I did it
Changed the way how to version in RPC and DBG images are constructed.
- How to verify it
Install app.ext with syncd^1.0.0 dependency on a switch with RPC syncd docker.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
This makes it possible to install the debug symbols if needed. Also install
the package into the debug version of sonic-dhcp-relay container.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
During warm reboot, linkmgrd would go away and so heartbeats will
be lost. This would result in standby link son peer ToR to pull the
link active. This is undesirable since we would not create tunnel
from the ToR that is being rebooted to the peer ToR. This PR
implicitly lock the state of the mux if config is not set to auto.
Also, orchagent does not initialize MUX to it hardware state, rather
it initilizes MUX to Unknown state. linkmgrd will detect this situation
and probe MUX state to correct orchagent state.
There a fix for the case when state os switched MUX is delayed. The
PR will poll the MUX for the new state. This is required to update
the state ds and hence create/tear tunnel.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Linkmgrd monitors link status, mux status, and link state. Has
the link becomes unhealthy, linkmgrd will trigger mux switchover
on a standby ToR ensuring uninterrupted service to servers/blades.
This PR is initial implementation of linkmgrd.
Also, docker-mux container hold packages related to maintaining and managing
mux cable. It currently runs linkmgrd binary that monitor and switches
the mux if needed.
This PR also introduces mux-container and starts linkmgrd as startup when
build is configured with INCLUDE_MUX=y
Edit: linkmgrd PR will follow.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Related work items: #2315, #3146150
This pull request add plugin support library to bash.
And we will create a TACACS+ plugin for bash in an other PR, which will bring per command authorization feature to bash.
Why I did it
To support TACACS per command authorization, we check user command before execute it.
How I did it
Add plugin support to bash.
How to verify it
UT with CUnit under bash project cover all new code in plugin.c.
Also pass all current UT.
Which release branch to backport (provide reason below if selected)
N/A
Description for the changelog
Add plugin support to bash.
Why I did it
Fix an issue on the Clearwater2 linecard.
When the linecard is started with a fresh image without configuration, phys would not be initialized.
How I did it
Added default_sku for Clearwater2 which prevents config-setup from failing to create a default config_db.json.
Added some extra logic in the phy-credo-init script to run the phy_config.sh of the hwsku pointed by default_sku if the DEVICE_METADATA.localhost.hwsku information is not populated in CONFIG_DB.
How to verify it
Booting an image with this change and without configuration will lead to the phys being initialized using the phy_config.sh from default_sku.
Why I did it
Pre-requisite: #8269
To be able to generate multi-asic KVM image.
To provide flexibility to generate single asic or both single and multi-asic images.
How I did it
Add a new build param, BUILD_MULTIASIC_KVM, if set to "y", the multi-asic VS target KVM images will be generated. If not, only single asic VS image will be generated.
Make changes to build_image.sh to generate 4-asic and 6-asic KVM images if BUILD_MULTIASIC_KVM parameter is set to y
How to verify it
Generate single-asic VS as currently done, no change in build steps:
make configure PLATFORM=vs
make target/sonic-vs.img.gz - will generate only single asic KVM image.
make BUILD_MULTIASIC_KVM=y target/sonic-vs.img.gz - will generate single asic and multi-asic KVM images.
should generate:
sonic-vs.bin
sonic-vs.img.gz
sonic-4asic-vs.img.gz
sonic-6asic-vs.img.gz
#### Why I did it
To bump thrift version to 0.13.0, to fix some dependencies issues.
#### How I did it
As there are dependencies between thrift and saithrinft server (bf3630316c/test/saithrift) which is used by syncd-rpc to update thrift version, I also need to make changes in saithrinft server, and then SAI ref point should be updated in sairedis, and then sairedis ref point should be updated too. It is too many change, so I decided to add thrift 0.13.0 as separeate target to be able to work and test father changes in saithrinft and one when appropriate changes will be merged to SAI and ref points will be updated I will squash this and the old thrift target. I was not able to build thrift deb pkg by original rules, so I copied `debian `folder from the old version and tune it for newer one.
#### How to verify it
```
make init
make configure PLATFORM=vs
make target/debs/buster/libthrift_0.13.0_amd64.deb
```
```
In version 3.0.0, If a broadcast address is specified in
/etc/network/interfaces, then when ifup is run, it will fail with an
error saying `'str' object has no attribute 'packed'`. This appears to
be because it expects all attributes for an interface to be "packable"
into a compact binary representation. However, it doesn't actually
convert the broadcast address into an IPNetwork object (other addresses
are handled).
Therefore, convert the broadcast address it reads in from a str to an
IPNetwork object.
Also explicitly specify the scope of the loopback address in
/etc/network/interfaces as host scope. Otherwise, it will get added as
global scope by default. As part of this, use JSON to parse ip's output
instead of text, for robustness.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Changes in the buffer template did not trigger a new sonic-config-engine wheel build and the cached build was used for the PR merge. When the new wheel build got trigged, few sonic-cfggen testcases started failing because of the changes made in the buffer templates.
How to verify it
Updated the dependency to include buffer templates and built sonic_config_engine-1.0-py3-none-any.whl. Testcase failure was seen as expected
- Why I did it
Make DHCP relay docker an extension. DHCP relay now carries dhcp relay commands CLI plugin and has a complete manifest.
It is installed as extension if INCLUDE_DHCP_REALY is set to y.
DEPENDS on #5939
- How I did it
Modify DHCP relay docker makefile and dockerfile. Make changes to sonic_debian_extension.j2 to install sonic packages.
I moved DHCP related CLI tests from sonic-utilities to DHCP relay docker.
This PR introduces a way to write a plugin as part of docker image and run the tests from cli-plugin-tests directory under docker directory.
The test result is available in target/docker-dhcp-relay.gz.log:
[ REASON ] : target/docker-dhcp-relay.gz does not exist NON-EXISTENT PREREQUISITES: docker-start target/docker-config-engine-buster.gz-load target/python-wheels/sonic_utilities-1.2-py3-none-any.whl-in
stall target/debs/buster/python3-swsscommon_1.0.0_amd64.deb-install
[ FLAGS FILE ] : []
[ FLAGS DEPENDS ] : []
[ FLAGS DIFF ] : []
============================= test session starts ==============================
platform linux -- Python 3.7.3, pytest-3.10.1, py-1.7.0, pluggy-0.8.0 -- /usr/bin/python3
cachedir: .pytest_cache
rootdir: /sonic/dockers/docker-dhcp-relay/cli-plugin-tests, inifile:
plugins: cov-2.6.0
collecting ... collected 10 items
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_plugin_registration PASSED [ 10%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_nonexist_vlanid PASSED [ 20%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_invalid_vlanid PASSED [ 30%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_invalid_ip PASSED [ 40%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_dhcp_relay_with_exist_ip PASSED [ 50%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_add_del_dhcp_relay_dest PASSED [ 60%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_remove_nonexist_dhcp_relay_dest PASSED [ 70%]
test_config_dhcp_relay.py::TestConfigVlanDhcpRelay::test_config_vlan_remove_dhcp_relay_dest_with_nonexist_vlanid PASSED [ 80%]
test_show_dhcp_relay.py::TestVlanDhcpRelay::test_plugin_registration PASSED [ 90%]
test_show_dhcp_relay.py::TestVlanDhcpRelay::test_dhcp_relay_column_output PASSED [100%]
=============================== warnings summary ===============================
/usr/local/lib/python3.7/dist-packages/tabulate.py:7
/usr/local/lib/python3.7/dist-packages/tabulate.py:7: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated, and in 3.8 it will stop working
from collections import namedtuple, Iterable
-- Docs: https://docs.pytest.org/en/latest/warnings.html
==================== 10 passed, 1 warnings in 0.35 seconds =====================
Why I did it
Allows users to host their own local docker registries and utilize them via the REGISTRY_SERVER and REGISTRY_PORT environmental variables
How I did it
Only set REGISTRY_SERVER and REGISTRY_PORT in rules/config if they are unset.
How to verify it
Export environmental variables REGISTRY_SERVER and REGISTRY_PORT to an alternative docker registry. Export the environmental variable ENABLE_DOCKER_BASE_PULL to y.
Ensure the required sonic-slave docker images are not present locally, but are available in the docker registry
Execute make init and make configure
Confirm that the appropriate docker images were pulled from the appropriate docker registry, and not built locally
#### Why I did it
I made this change to support warm/fast reboot for SONiC extension packages as per HLD Azure/SONiC#682.
#### How I did it
I extended manifest.json.j2 with new warm/fast reboot related fields and also extended sonic_debian_extension.j2 script template to generate the shutdown order files for warm and fast reboot.
Signed-off-by: Stepan Blyschak stepanb@mellanox.com
Why I did it
To support building DHCP relay as extension and installing it during build time.
How I did it
Created infrastructure. Users need to define their packages in rules/sonic-packages.mk
How to verify it
Together with #6531
Why I did it
To Fix SONiC build with INSTALL_DEBUG_TOOLS=y
How I did it
Fixed generate_manifest function to use version prefix in file names
How to verify it
Build SONiC with INSTALL_DEBUG_TOOLS=y
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
#### Why I did it
- To build flashrom properly with dependency tracking.
#### How I did it
- Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
- At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
- Currently flashrom builds only for Dell S6100 platforms.
Introduce new sonic-buildimage images for Broadcom DNX ASIC family.
sonic-broadcom-dnx.bin
sonic-aboot-broadcom-dnx.swi
How I did it
NO CHANGE to existing make commands
make init; make configure PLATFORM=broadcom; make target/sonic-aboot-broadcom.swi; make target/sonic-broadcom.bin
The difference now is that it will result in new broadcom images for DNX asic family as well.
sonic-broadcom.bin, sonic-broadcom-dnx.bin
sonic-aboot-broadcom.swi, sonic-aboot-broadcom-dnx.swi
Note: This PR also adds support for Broadcom SAI 5.0 (based on 1.8 SAI ) for DNX based platform + changes in platform x86_64-arista_7280cr3_32p4 bcm config files and platform_env.conf files
Why I did it
The SONiC switches get their docker images from local repo, populated during install with container images pre-built into SONiC FW. With the introduction of kubernetes, new docker images available in remote repo could be deployed. This requires dockerd to be able to pull images from remote repo.
Depending on the Switch network domain & config, it may or may not be able to reach the remote repo. In the case where remote repo is unreachable, we could potentially make Kubernetes server to also act as http-proxy.
How I did it
When admin explicitly enables, the kubernetes-server could be configured as docker-proxy. But any update to docker-proxy has to be via service-conf file environment variable, implying a "service restart docker" is required. But restart of dockerd is vey expensive, as it would restarts all dockers, including database docker.
To avoid dockerd restart, pre-configure an http_proxy using an unused IP. When k8s server is enabled to act as http-proxy, an IP table entry would be created to direct all traffic to the configured-unused-proxy-ip to the kubernetes-master IP. This way any update to Kubernetes master config would be just manipulating IPTables, which will be transparent to all modules, until dockerd needs to download from remote repo.
How to verify it
Configure a switch such that image repo is unreachable
Pre-configure dockerd with http_proxy.conf using an unused IP (e.g. 172.16.1.1)
Update ctrmgrd.service to invoke ctrmgrd.py with "-p" option.
Configure a k8s server, and deploy an image for feature with set_owner="kube"
Check if switch could successfully download the image or not.
#### Why I did it
The PR checkers do not re-run the sonic-config-engine test cases, caused by some of the config files changes not detected.
https://sonic-jenkins.westus2.cloudapp.azure.com/job/mellanox/job/buildimage-mlnx-all/660/console
…
07:13:24 ======================================================================
07:13:24 ERROR: test_bgpd_quagga (tests.test_j2files.TestJ2Files)
07:13:24 ----------------------------------------------------------------------
…
07:13:24 ======================================================================
07:13:24 ERROR: test_zebra_quagga (tests.test_j2files.TestJ2Files)
07:13:24 ----------------------------------------------------------------------
…
07:13:24 error: Test failed: <unittest.runner.TextTestResult run=161 errors=2 failures=0>
07:13:24 [ FAIL LOG END ] [ target/python-wheels/sonic_config_engine-1.0-py2-none-any.whl ]
07:13:24 make: *** [slave.mk:603: target/python-wheels/sonic_config_engine-1.0-py2-none-any.whl] Error 1
07:13:24 Makefile.work:292: recipe for target 'target/sonic-mellanox.bin' failed
07:13:24 make[1]: *** [target/sonic-mellanox.bin] Error 2
07:13:24 make[1]: Leaving directory '/data2/johnar/workspace/mellanox/buildimage-mlnx-all'
07:13:24 Makefile:7: recipe for target 'target/sonic-mellanox.bin' failed
07:13:24 make: *** [target/sonic-mellanox.bin] Error 2
See PR: https://github.com/Azure/sonic-buildimage/pull/7476
#### How I did it
Add the depended files.
See src/sonic-config-engine/tests/test_j2files.py
Why I did it
This PR adds changes in sonic-config-engine to consume configuration data in SONiC Yang schema and generate config_db entries
How I did it
Add a new file sonic_yang_cfg_generator .
This file has the functions to
parse yang data json and convert them in config_db json format.
Validate the converted config_db entries to make sure all the dependencies and constraints are met.
Add a new option -Y to the sonic-cfggen command for this purpose
Add unit tests
This capability is support only in sonic-config-engine Python3 package only
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
Signed-off-by: Yong Zhao yozhao@microsoft.com
Why I did it
Currently we leveraged the Supervisor to monitor the running status of critical processes in each container and it is more reliable and flexible than doing the monitoring by Monit. So we removed the functionality of monitoring the critical processes by Monit.
How I did it
I removed the script process_checker and corresponding Monit configuration entries of critical processes.
How to verify it
I verified this on the device str-7260cx3-acs-1.
- Why I did it
To give SONiC Application Extension developers an environment to run and develop their apps.
- How I did it
Created sonic-sdk and sonic-sdk-buildenv dockers and their dbg versions.
- How to verify it
Build:
$ make -f slave target/sonic-sdk.gz target/sonic-sdk-buildenv.gz
#### Why I did it
Fix https://github.com/Azure/sonic-telemetry/issues/71
#### How I did it
Added memory limit for telemetry docker.
Historical docker memory usage shows telemetry docker consuming 150-200MB memory. Adding some extra buffer.
Platform library changes
- Fix the use of /proc/modules during testing, fixes#7463
- Add `libsfp-eeprom.so` build to read/write xcvr eeproms in C
- Add some more reboot-cause information
- Write down temperature hw thresholds to the sensors
- Report software thresholds through platform api
- Writ `port_name sysfs` file of optoe`
- Tests enhancements
- Fix dependency issues for chassis provisioning
Platform configuration changes
- Add `pcie.yaml` configuration for a few platforms
- Mount `libsfp-eeprom.so` inside `pmon`
- Fix `Arista-7050SX3-48C8` and `Arista-7050SX3-48YC8' platform and hwsku
- Miscellaneous fixes
Co-authored-by: Boyang Yu <byu@arista.com>
Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
This PR is part of SONiC Application Extension
Depends on #5938
- Why I did it
To provide an infrastructure change in order to support SONiC Application Extension feature.
- How I did it
Label every installable SONiC Docker with a minimal required manifest and auto-generate packages.json file based on
installed SONiC images.
- How to verify it
Build an image, execute the following command:
admin@sonic:~$ docker inspect docker-snmp:1.0.0 | jq '.[0].Config.Labels["com.azure.sonic.manifest"]' -r | jq
Cat /var/lib/sonic-package-manager/packages.json file to verify all dockers are listed there.
Why I did it
Support readonly version of the command vtysh
How I did it
Check if the command starting with "show", and verify only contains single command in script.
#### Why I did it
To build flashrom properly with dependency tracking.
#### How I did it
Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
Compiling ethtool from source is causing ethtool unit tests to fail on ARM Platforms.
These tests are failing: (By default netlink-interface is enabled while compiling ethtool)
Link: ([Test File Link](https://salsa.debian.org/kernel-team/ethtool/-/blob/debian/1%255.9-1/test-cmdline.c#L28))
```
FAIL: test-cmdline
==================
E: ethtool 16_char_devname! returns 1
E: ethtool
127_char_devname0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcde returns 1
E: ethtool --change devname xcvr external returns 0
E: ethtool --change devname speed 100 duplex half port tp autoneg on advertise 0x1 phyad 1 xcvr external wol p sopass 01:23:45:67:89:ab msglvl 1 returns 0
FAIL test-cmdline (exit status: 1)
```
Tested this on Local ARM Emulated Container:
```
(Docker Container Emulating ARM)
vkarri@3a03c70eed35:/tmp/ethtool$ ./ethtool 16_char_devname!
netlink interface initialization failed, device name longer than 15 not supported
vkarri@3a03c70eed35:/tmp/ethtool$ echo $?
1 (Expected 0)
vkarri@3a03c70eed35:~/ethtool$ ./ethtool 16_char_devnameee
netlink interface initialization failed, device name longer than 15 not supported
Checked for dependencies: (all are present)
vkarri@3a03c70eed35:~/ethtool$ apt-cache policy libmnl0
libmnl0:
Installed: 1.0.4-2
Candidate: 1.0.4-2
Version table:
*** 1.0.4-2 500
500 http://deb.debian.org/debian buster/main armhf Packages
500 http://packages.trafficmanager.net/debian/debian buster/main armhf Packages
100 /var/lib/dpkg/status
vkarri@3a03c70eed35:~/ethtool$ apt-cache policy libc6
libc6:
Installed: 2.28-10
Candidate: 2.28-10
Version table:
*** 2.28-10 500
500 http://deb.debian.org/debian buster/main armhf Packages
500 http://packages.trafficmanager.net/debian/debian buster/main armhf Packages
100 /var/lib/dpkg/status
```
#### How I did it
Disabled netlink-interface for ethtool.
Even though Netlink is not available, it doesn't seem to impact what ethtool was supposed to do. In fact the older version which was in use before this PR [#5725](https://github.com/Azure/sonic-buildimage/pull/5725) did not have netlink support and everything seemed to work well
Article on Netlink-Support for ethtool: https://lwn.net/Articles/783633/
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
* Updating version of hsflow daemon to apply
fix, which resolves problem of switching
between IPv4 and IPv6, in case when the
IPv4 has deleted for the interface.
The new release of hsflowd contains the fix for the issue: sflow/host-sflow@2703ecb
How I did it
HSFLOWD_VERSION env variable has changed in the rules to be pointed to the latest release of hsflowd.
How to verify it
sudo config sflow enable
sudo config loopback add Loopback1
sudo config int ip add Loopback1 a84f:97ff:fea7:33a5::fe80/64
sudo config int ip add Loopback1 192.168.101.1/24
sudo config sflow agent-id add Loopback1
sudo config sflow collector add Collector1 192.168.101.1
sudo config sflow collector add Collector2 a84f:97ff:fea7:33a5::fe80
use sudo sflowtool -p 6343 -l for checking sflow data
remove and add again the ipv4 entry of Loopback1.
hsflowd should change agent ip from IPv4 to IPv6 and wise versa, depending on IPv4 entry present or not.
Switching between IPs is being performed by hsflowd, based on IP address priority ranking.
Signed-off-by: Maksym Belei <Maksym_Belei@jabil.com>
Update FRR to 7.5.1. The following is a list of new commits.
```
df7ab485b FRRouting Release 7.5.1
f4ed841b8 Merge pull request #8187 from opensourcerouting/rpmfixes-75
86d5a20e3 Merge pull request #8193 from mjstapp/fix_signals_7_5
b339cc149 lib: avoid signal-handling race with event loop poll call
0f7b432c3 lib: add debug output for signal mask
c0290c86d lib: add sigevent_check api
7a5348665 doc: Fix CentOS 7 Documentation
2a8e69f48 Merge pull request #8064 from donaldsharp/foo
cf4d1a744 redhat: Fix changelog incorrect date format
b78dcb209 Merge pull request #8181 from idryzhov/7.5-zebra-blackhole
2032e7e72 zebra: don't use kernel nexthops for blackhole routes
e52003567 bgpd: When deleting a neighbor from a peer-group the PGNAME is optional
aa86a6a6f Merge pull request #8161 from mjstapp/fix_sa_7_5_backports
13a8efb4b Merge pull request #8156 from idryzhov/7.5-backports-2021-02-26
58911c6ed lib: Free memory leak in error path in clippy
556dfd211 lib: use right type for wconv() return val
bd9caa8f1 lib: fix some misc SA warnings
683b3fe3f lib: register dependency between control plane protocol and vrf nb nodes
b45248fb6 lib: add definitions for vrf xpaths
7b9f10d04 lib: add ability to register dependencies between northbound nodes
9c240815c bgpd: Bgp peer group issue
d1b43634b bgpd: upon bgp deletion, do not systematically ask to remove main bgp
f5d1dc55e bgpd: Fix crash when we don't have a nexthop
c2e463478 frr-reload: rpki context exiting uses exit and not end
f11db1698 bgpd: Blackhole nexthops are not reachable
c628e94ff staticd: fix vrf enabling
49b079ef1 staticd: fix nexthop creation and installation
0077038e9 staticd: fix nexthop validation
be3dfbbc7 zebra: use AF_INET for protocol family
```
This package was outdated and did not properly install on buster due to dependency changes.
This version should work on all DCS-7280CR3*-32[PD]4 platforms.
Signed-off-by: Samuel Angebault <staphylo@arista.com>
- Made python2 to python3 changes
- Removed ord() func as python3 return int instead of str
- Had to change chr(..) to bytes([..]) function while using ctypes class methods
Update FRR 7.5 head. The following is a list of new commits.
```
e2f17ae47ad047e66923c2ff1e84c9ba10d4ad38 Merge pull request #8096 from idryzhov/7.5-backports-2021-02-16
380341362ced8e317c18b7395acb012de1f23acd ospf6d: Don't send hellos on loopback interface
7fa78b659f8e720466e0df62689327ea4b9ff867 bgpd: send correct BMP down message when nht fails
385faf6c079a41def1e6eb882cbfd50047559644 [filter]: change return code for errors
d9a0e9a2934f2f75c64496fe4c724a18aa581fcb bfdd: fix session lookup
08afa0a75311a4e8cb2a18116384b603f7f2d751 ospf6d : fix issue in ecmp inter area route
2299afa1a9128d87d5169742b993c0ada575eb83 ospfd: Prevent duplicate packet read in certain vrf situations
ff42a28af659ee61c0efb877b10738a5812f4bc2 vrf: use wrappers to change VRF_CONFIGURED flag
2bdc59ca21da2d67b77ec70a2fadffbca60690cd vrf: mark vrf as configured when entering vrf node
b9611f65a71adc0b8fa14a5a4d1a8f44e04dcd85 ospf6d: Fix LSA formatting out-of-bounds access
610ebf56913fa56167b0a2a127b07afe020a1efe bfdd: Prevent use after free ( again )
35b0cd5d753dda9aa70ea1c06db61a8d4b8671e3 *: Fix usage of bfd_adj_event
95b8915d0f4de3eae5438632ecd0827061ef48e8 ospf6d: Fix LSA formatting inconsistent retvals
49d73d8be84dbd23d767697474019165e511786c pimd: SGRpt prune received during prune didn't override holdtime
1d0d19afa9bb7cd4bc476d00c887876bc04eee95 eigrpd: Correctly set the mtu for eigrp packets sent
bbb08db69f8eb554d23b4920c1c1e3982d8d2a91 zebra: Prevent sending of unininted data
0813d650a8120458ab7d9317061f3864dbc6f2f7 ospf6d: prevent use after free
2f2e981d967b36b240fca82fea8a961d927ef43c lib: Prevent unininted usage of data
6171becdb391ea5b88916a3a28b04b555e1fc518 bfdd: Prevent storage of ifp pointer that has been deleted
9ebb41cf4bb51e0872796530bf8c7a4d819053db bfdd: Prevent unininited data transmittal
72e16db6fea3629111537f9eb10c86f2d275adcb eigrpd: Prevent uninitialized value from being used
72b61a5bb09d59c3cc0d1d401d51de96949dff52 zebra: disallow resolution to duplicate nexthops
1083bae40b00c0ed2c9f3521ae1ab9675a87202e bgpd: Initialize bgp_notify.raw_data before passing to bgp_notify_receive()
31df7314310416f10c133dcfe9c4586edadf3fbb doc: ebgp-requires-policy requires manuall session clearing
ecc8ec678d2d8a1c3d1d50a22732f9fc4bad689c watchfrr: fix SA warning
9d9365d161979a031de817c1fbcab6508dfee013 watchfrr: fix crash on missing optional argument
907e600d63c1c5b6bda40b0a08344a72533b1787 pimd: Prevent use after free
b47374f0e95d99c93bfe2d14afe55219a9fda455 doc: Update bgp doc for more rfc-8212 talk
4fbeef60cc8dc5362ff84fc91d1a4e343e4e32c7 docker: centos 7, 8 yang bump and repo fixes
808e6d731f330df4a91fdfd6df6a3c8dce1651a6 docker: prefer alpine:latest for building
91b3c471f1c48818370a0f218add917f0d46aa47 Merge pull request #8092 from donaldsharp/7.5_track
60be43c0bf63c16ca42008fa802d0a2050f3fce2 Merge pull request #8090 from ton31337/fix/static_network_vrf_7.5
1f6785aa60cc57a5c8d5de98c9c09a344a0c9262 ospf6d: Track wait_timer and disable when needed
c89e326be91312bed066eb2447ea8944e25a225e bgpd: Check for peer->su_remote if not NULL when handling IPv6 nexthop
15e070f6448870c98c030b6b5013ad8750d8918b Merge pull request #8047 from pguibert6WIND/nhrp_shortcut_routes_75
912994efec94082ae7d8c5e014c410964bea19f4 Merge pull request #8034 from qlyoung/fix-gnu-readline-bracketed-paste-7.5.1
9f50536993f1eb900fbfbe98d21b8c072bbd9c15 nhrpd: replace nhrp route nexthop with onlink route when prefix=nh
8c185008246db31c34574d7b79358001ac411f84 nhrpd: shortcut routes installed with nexthop.
c46c87d19758040bc3f3902ab8e4a0f1bb908721 vtysh: disable bracketed paste in readline
20b35e4c3386de798f3b0cb9f2a7e6b04d995485 Merge pull request #8018 from ton31337/fix/drop_aggregate_as_attribute_if_malformed_7.5
fa25d7327fd64613cc7530aba2edfcde038da074 bgpd: Unset only aggregator flag when AGGREGATOR_AS is 0
3ee9a3726fe1a526d946c1978487a4509fe98f29 bgpd: Drop aggregator_as attribute if malformed in case of BGP_AS_ZERO
be88595c6a2011f0e882bfa663baa61c86ede14e Merge pull request #8005 from opensourcerouting/snap-libyang1-fix-75
fd840ad37f2e836b210c6e60fc6325a4c3e495ce snapcraft: Update rtrlib to 0.7.0
3d00552fa9aedb96acd7ea773bc14fd2b77e7e0f snapcraft: Fix passthrough path for Libyang 1.x
```
- Introduced TS common file in docker as well and moved common functions.
- TSA/B/C scripts run only in BGP instances for front end ASICs.
In addition skip enforcing it on route maps used between internal BGP sessions.
admin@str--acs-1:~$ sudo /usr/bin/TSA
System Mode: Normal -> Maintenance
and in case of Multi-ASIC
admin@str--acs-1:~$ sudo /usr/bin/TSA
BGP0 : System Mode: Normal -> Maintenance
BGP1 : System Mode: Normal -> Maintenance
BGP2 : System Mode: Normal -> Maintenance
- Why I did it
To move ‘sonic-host-service’ which is currently built as a separate package to ‘sonic-host-services' package.
- How I did it
- Moved 'sonic-host-server' to 'src/sonic-host-services' and included it as part of the python3 wheel.
- Other files were moved to 'src/sonic-host-services-data' and included as part of the deb package.
- Changed build option ‘INCLUDE_HOST_SERVICE’ to ‘ENABLE_HOST_SERVICE_ON_START’ for enabling sonic-hostservice at boot-up by default.
* Remove makefile and
As part of #6046 we have moved to python3 of dbsyncd.
Cleanup the python2 makefile and dependency.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Revert "Remove makefile and dependency for python2 of dbsyncd."
This reverts commit ceaa4f8dd9.
* Fix
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Bump version number to 2.0.32-1 to include a fix for a memory-leak
found during testing. A wrong API is used to free the cJSON
data-structure, which only frees the first pointed-to structure.
The proper API should recursively free all structures.
Signed-off-by: Garrick He <garrick_he@dell.com>
Some commands used during build will prompt user interactively, but this is not expected during build. Since most output is collected into log file, user could not see the prompt and feel the build process hangs.
- How I did it
Use mv command in non interactive mode
Redirect stdin to null if command output is collected into log file.
This commit fixes a typo in the fix delivered in PR #6538
syncd fails on the armhf platform within sonic-config-engine/portconfig.py when importing the following
'from swsscommon.swsscommon import ConfigDBConnector'
- combine docker-ptf-saithrift into docker-ptf docker
- build docker-ptf under platform vs
- remove docker-ptf for other platforms
Signed-off-by: Guohan Lu <lguohan@gmail.com>
- Support for non-template based FRR configurations (BGP, route-map, OSPF, static route..etc) using config DB schema.
- Support for save & restore - Jinja template based config-DB data read and apply to FRR during startup
**- How I did it**
- add frrcfgd service
- when frr_mgmg_framework_config is set, frrcfgd starts in bgp container
- when user changed the BGP or other related table entries in config DB, frrcfgd will run corresponding VTYSH commands to program on FRR.
- add jinja template to generate FRR config file to be used by FRR daemons while bgp container restarted
**- How to verify it**
1. Add/delete data on config DB and then run VTYSH "show running-config" command to check if FRR configuration changed.
1. Restart bgp container and check if generated FRR config file is correct and run VTYSH "show running-config" command to check if FRR configuration is consistent with attributes in config DB
Co-authored-by: Zhenhong Zhao <zhenhong.zhao@dell.com>
**- Why I did it**
To enable running Pytest unit tests before building the Python 3 sonic-platform-common package
**- How I did it**
- Add Python 3 sonic-config-engine package as a dependency of Python 3 sonic-platform-common package (needed for both runtime and unit tests)
- No longer disable unit tests when building Python 3 sonic-platform-common package
The only Python code in the SwSS package, restore_neighbors.py, was recently converted to Python 3 and most dependencies were updated as part of #6207. However, the SwSS makefile still listed the Python 2 version of the swsscommon package as a dependency. This caused Python 2-related packages to be installed in containers unnecessarily.
1. Fixes the missing DPKG file for gbsyncd-vs package
2. Fixes the softlink issue on the Platform-common and ztp package
3. Fixes the PYTHNON_DEBS list is missing for DBG dockers.
Fix#119
when parallel build is enable, multiple dpkg-buildpackage
instances are running at the same time. /var/lib/dpkg is shared
by all instances and the /var/lib/dpkg/updates could be corrupted
and cause the build failure.
the fix is to use overlay fs to mount separate /var/lib/dpkg
for each dpkg-buildpackage instance so that they are not affecting
each other.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
The HLD about MACsec feature is at :
https://github.com/Azure/SONiC/blob/master/doc/macsec/MACsec_hld.md
- How to verify it
This PR doesn't set MACsec container automatically start, You should manually start the container by docker run docker-macsec
wpa_supplicant binary can be found at MACsec container.
This PR depends on the PR, WPA_SUPPLICANT, and The MACsec container will be set as automatically start by later PR.
Signed-off-by: zegan <zegan@microsoft.com>
build frr dbg image force to install frr in the build process
which breaks the current build and is uneccessary.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
frr build requires libyang 1.0.184 which conflicts with
libyang 1.0.73. Solution here is to compile frr and libyang 1.0.184
first, and then uninstall libyang 1.0.184 after frr build.
Then, compile libyang 1.0.73 and all packages depend on it later.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
python2 is end of life and SONiC is going to support python3. This PR is going to support:
1. Build pmon daemons with python3
2. Install and run python3 version pmon daemons
**- How I did it**
1. Change pmon daemons make files to build bothe python2 and python3 whl
2. Change docker-platform-monitor make files to install both python2 and python3 whl
3. Change pmon docker startup files to start pmon daemons according to the supported platform API version
- add config option ENABLE_DOCKER_BASE_PULL to pull sonic-slave docker from registry
- use REGISTRY_PORT, REGISTRY_SERVER to specify docker registry
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
As part of migrating SONiC codebase from Python 2 to Python 3
**- How I did it**
- No longer install Python 2 in docker-base-buster or docker-config-engine-buster.
- Install Python 2 and pip2 in the following containers until we can completely eliminate it there:
- docker-platform-monitor
- docker-sonic-mgmt-framework
- docker-sonic-vs
- Pin pip2 version <21 where it is still temporarily needed, as pip version 21 will drop support for Python 2
- Also preform some other cleanup, ensuring that pip3, setuptools and wheel packages are installed in docker-base-buster, and then removing any attempts to re-install them in derived containers
* First cut image update for kubernetes support.
With this,
1) dockers dhcp_relay, lldp, pmon, radv, snmp, telemetry are enabled
for kube management
init_cfg.json configure set_owner as kube for these
2) Each docker's start.sh updated to call container_startup.py to register going up
As part of this call, it registers the current owner as local/kube and its version
The images are built with its version ingrained into image during build
3) Update all docker's bash script to call 'container start/stop/wait' instead of 'docker start/stop/wait'.
For all locally managed containers, it calls docker commands, hence no change for locally managed.
4) Introduced a new ctrmgrd service, that helps with transition between owners as kube & local and carry over any labels update from STATE-DB to API server
5) hostcfgd updated to handle owner change
6) Reboot scripts are updatd to tag kube running images as local, so upon reboot they run the same image.
7) Added kube_commands.py to handle all updates with Kubernetes API serrver -- dedicated for k8s interaction only.
HLD: Azure/SONiC#646
Introducing chassisd process to monitor status of the control, line and fabric cards in a modular chassis.
- Why I did it
Modular Chassis has control-cards, line-cards and fabric-cards along with other peripherals. Chassisd will be a central entity that has visibility of the entire chassis.
- How I did it
Chassisd process will monitor cards in the main thread. Another configuation_handling_task is created to listen to CONFIG_DB for admin_status up/down events. The monitored status is persisted in REDIS-DB.
libxslt-dev and libz-dev are dependencies for lxml==4.6.1 which is required for pyangbind==0.8.1
lxml-4.6.2-cp37-cp37m-manylinux1_x86_64.whl is directly downloaded in amd64 whereas in arm this is built from lxml-4.6.2.tar.gz
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
python2 is end of life and SONiC is going to support python3. This PR is going to support:
1. Mellanox SONiC platform API python3 support
2. Install both python2 and python3 verson of Mellanox SONiC platform API or pmon and host side
Barefoot platform vendors' sonic_platform packages import the Python 'thrift' library. Previously, our custom-built package was being installed in the PMon container and host OS. However, we are only building a Python 2 version of that package, which was only intended for use with saithrift.
Fixes#6077
The soinc-frr module has src/sonic-frr/frr submodule. The FRR sub module dependency files are not added to the DPKG file tracking. The patch includes the following.
- Included the submodule dependency files
- Removes the symbolic files.
It fixes the following error during build.
>>> fatal: not a git repository (or any of the parent directories): .git
"SONIC_DPKG_CACHE_METHOD" : "cache"
"DPKG_CACHE_PATH" : "/var/cache/sonic/artifacts"
Made changes so that Lldp docker start using py3 of sonic-db-syncd
submodule update sonic-db-syncd
5cc29a1b32d8d1f4dfbc967bfea2727c50a49c76 (HEAD -> master, origin/master, origin/HEAD) Changes to convert sonic-dbsyncd from python 2 to 3
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Submodule updates include the following commits:
* src/sonic-utilities 9dc58ea...f9eb739 (18):
> Remove unnecessary calls to str.encode() now that the package is Python 3; Fix deprecation warning (#1260)
> [generate_dump] Ignoring file/directory not found Errors (#1201)
> Fixed porstat rate and util issues (#1140)
> fix error: interface counters is mismatch after warm-reboot (#1099)
> Remove unnecessary calls to str.decode() now that the package is Python 3 (#1255)
> [acl-loader] Make list sorting compliant with Python 3 (#1257)
> Replace hard-coded fast-reboot with variable. And some typo corrections (#1254)
> [configlet][portconfig] Remove calls to dict.has_key() which is not available in Python 3 (#1247)
> Remove unnecessary conversions to list() and calls to dict.keys() (#1243)
> Clean up LGTM alerts (#1239)
> Add 'requests' as install dependency in setup.py (#1240)
> Convert to Python 3 (#1128)
> Fix mock SonicV2Connector in python3: use decode_responses mode so caller code will be the same as python2 (#1238)
> [tests] Do not trim from PATH if we did not append to it; Clean up/fix shebangs in scripts (#1233)
> Updates to bgp config and show commands with BGP_INTERNAL_NEIGHBOR table (#1224)
> [cli]: NAT show commands newline issue after migrated to Python3 (#1204)
> [doc]: Update Command-Reference.md (#1231)
> Added 'import sys' in feature.py file (#1232)
* src/sonic-py-swsssdk 9d9f0c6...1664be9 (2):
> Fix: no need to decode() after redis client scan, so it will work for both python2 and python3 (#96)
> FieldValueMap `contains`(`in`) will also work when migrated to libswsscommon(C++ with SWIG wrapper) (#94)
- Also fix Python 3-related issues:
- Use integer (floor) division in config_samples.py (sonic-config-engine)
- Replace print statement with print function in eeprom.py plugin for x86_64-kvm_x86_64-r0 platform
- Update all platform plugins to be compatible with both Python 2 and Python 3
- Remove shebangs from plugins files which are not intended to be executable
- Replace tabs with spaces in Python plugin files and fix alignment, because Python 3 is more strict
- Remove trailing whitespace from plugins files
**- Why I did it**
We were building a custom version of Supervisor because I had added patches to prevent hangs and crashes if the system clock ever rolled backward. Those changes were merged into the upstream Supervisor repo as of version 3.4.0 (http://supervisord.org/changes.html#id9), therefore, we should be able to simply install the vanilla package via pip. This will also allow us to easily move to Python 3, as Python 3 support was added in version 4.0.0.
**- How I did it**
- Remove Makefiles and patches for building supervisor package from source
- Install Python 3 supervisor package version 4.2.1 in Buster base container
- Also install Python 3 version of supervisord-dependent-startup in Buster base container
- Debian package installed binary in `/usr/bin/`, but pip package installs in `/usr/local/bin/`, so rather than update all absolute paths, I changed all references to simply call `supervisord` and let the system PATH find the executable to prevent future need for changes just in case we ever need to switch back to build a Debian package, then we won't need to modify these again.
- Install Python 2 supervisor package >= 3.4.0 in Stretch and Jessie base containers
sonic-bgpcfgd build fails in the absence of Python 2, as it attempts to explicitly call sonic-cfggen using `/usr/bin/python2.7`. Also, it attempts to call sonic-cfggen using a local, relative path. Since the sonic-config-engine package is not installed, neither are its dependencies.
Now, we configure the Python 3 sonic-config-engine as a dependency of sonic-bgpcfgd, which ensures the Python 3 sonic-config-engine package and its dependencies are installed before sonic-bgpcfgd is built/tested.
Submodule updates include the following commits. Also adding sonic-swsscommon build dependencies where necessary.
* src/sonic-py-swsssdk 1ea30d2...9d9f0c6 (1):
> [SonicV2Connector] make decode_responses=True as default, so python2 application need no code change when migrated to python3(#93)
* src/sonic-snmpagent 6e4a796...57e54d9 (3):
> Interact with Redis by str instead of bytes, migrate to SonicV2Connector with `decode_responses=True` (#171)
> Add a test case for LLDP_LOC_CHASSIS.lldp_loc_man_addr has only one IPv6 address (#167)
> [LLDP]: Update init_db to load global database config (#166)
* src/sonic-utilities acfa824...b693cf6 (11):
> Remove SKU create pytest output directory before execution of the script (#1226)
> [show][techsupport][multi-ASIC] Add support to collect tech support on multi ASIC platform (#1193)
> [show] Fix `show ip bgp sum` (#1194)
> [sonic_sku_create] Move tests from sonic-utilities-tests/ folder to tests/ folder (#1222)
> Replace swsssdk.SonicV2Connector with swsscommon.SonicV2Connector (SWIG wrapper of C++ implementation) in production code (#1217)
> Copy missing values from INIT_CFG to config_db as part of db_migration task (#1209)
> [connect][clear] Support --devicename option for connect/clear line commands (#1214)
> [consutil][show] Remove root need from show line command (#1218)
> [Mellanox] SKU creator Tool (#1163)
> SONiC installer - fix string formatting during image type check (#1197)
> [show/fgnhg.py] Fix whitespace issues (#1211)
This change introduces PDDF which is described here: https://github.com/Azure/SONiC/pull/536
Most of the platform bring up effort goes in developing the platform device drivers, SONiC platform APIs and validating them. Typically each platform vendor writes their own drivers and platform APIs which is very tailor made to that platform. This involves writing code, building, installing it on the target platform devices and testing. Many of the details of the platform are hard coded into these drivers, from the HW spec. They go through this cycle repetitively till everything works fine, and is validated before upstreaming the code.
PDDF aims to make this platform driver and platform APIs development process much simpler by providing a data driven development framework. This is enabled by:
JSON descriptor files for platform data
Generic data-driven drivers for various devices
Generic SONiC platform APIs
Vendor specific extensions for customisation and extensibility
Signed-off-by: Fuzail Khan <fuzail.khan@broadcom.com>
Add Python 3 sonic-yang-mgmt package as a dependency in sonic-utilities makefile.
Recently updated the sonic-utilities Jenkins build environment [here](https://github.com/Azure/sonic-build-tools/pull/185) to begin running tests on the Python 3 version of the sonic-utilities package. However, the build is failing because it attempts to copy the Python 3 sonic-yang-mgmt package from the artifacts of the latest VS build, but the package does not exist because there are no targets which specify it as a dependency. This PR will ensure the Python 3 package is built during the image build process.
* Convert bgpcfgd to python3
Convert bgpmon to python3
Fix some issues in bgpmon
* Add python3-swsscommon as depends
* Install dependencies
* reorder deps
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
* Build and install openssh from source
* Copy openssh deb package to dest folder
* Update make rule
* Update sonic debian extension
* Append empty line before EOF
* Update openssh patch
* Add openssh-server to base image dependency
* Fix indent type
* Fix comments
* Use commit id instead of tag id and add comment
Signed-off-by: Jing Kan jika@microsoft.com
- Change `/run/arista` mount to pmon by `/var/run/platform_cache`
- Python3 by default for Arista platform initialisation
- Fix outstanding py2/3 compatibility issues (eeprom mostly)
- Use pytest for unit testing
- Miscellaneous modular fixes
