#### Why I did it
src/sonic-swss
```
* ff524e6d - (HEAD -> master, origin/master, origin/HEAD) [dash] add a retry for an ACL rule creation if a tag is not created yet (#2972) (7 hours ago) [Yakiv Huryk]
* 620db3da - [ci] Allow partially success build artifact in PR checker pipeline. #2986 (3 days ago) [Liu Shilong]
* d357e6f1 - [copporch] Add safeguard during policer attribute update (#2977) (4 days ago) [Vivek]
* cb460394 - [fpmsyncd][WR] Relax the static schema constraint for ROUTE_TABLE (#2981) (5 days ago) [Vivek]
* a1ce21f6 - Change base directory referenced in coverage.xml (#2976) (6 days ago) [Lawrence Lee]
* 920959cf - [Dash] [UT] Add ZMQ test case for dash (#2967) (6 days ago) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Fix zebra leaking memory with fib suppress enabled. Porting the fix from
FRRouting/frr#14983
While running test_stress_route.py, systems with lower memory started to throw low memory logs. On further investigation, a memory leak has been found in zebra which was fixed in the FRR community.
#### Why I did it
src/sonic-gnmi
```
* 88e82d4 - (HEAD -> master, origin/master, origin/HEAD) Replace PFC_WD_TABLE with PFC_WD (#173) (8 days ago) [Zain Budhwani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/linkmgrd
```
* 79c3872 - (HEAD -> master, origin/master, origin/HEAD) [active-standby] Fix `show mux status` inconsistency introduced by orchagent rollback (#225) (24 hours ago) [Jing Zhang]
* ba913c0 - [warmboot] use config_db connector to update mux mode config instead of CLI (#223) (2 days ago) [Jing Zhang]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
Current YANG model of sonic-events-swss:chk_crm_threshold has the type uint8 for leaf used_cnt which is too small of a range to hold values of used_cnt which can greatly exceed that. Updating leaf type of used_cnt and free_cnt to match defined definition.
Changed to uint32 as per defined here: https://github.com/sonic-net/sonic-swss/blob/master/orchagent/crmorch.h#L99
##### Work item tracking
- Microsoft ADO **(number only)**:26091912
#### How I did it
Update leaf value
#### How to verify it
UT and sonic-mgmt PR checker
- Why I did it
Add support of a new 't1-smartswitch' topology to the sample config generator. The topology passed to sonic-cfggen utility as a parameter to generate sample configuration for Smart Switch:
sonic-cfggen -k <SKU> --preset t1-smartswitch ...
- How I did it
Extend sample config generator to support new topology and read Smart Switch specific data from hwsku.json.
- How to verify it
Run unit tests. The changes are covered with the new unit tests.
#### Why I did it
src/sonic-swss
```
* 6026b6d6 - (HEAD -> master, origin/master, origin/HEAD) [dash] add ACL group bind check for rule create/update (#2974) (88 minutes ago) [Yakiv Huryk]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/linkmgrd
```
* e420df4 - (HEAD -> master, origin/master, origin/HEAD) Exclude DbInterface in PR coverage check (#224) (5 hours ago) [Jing Zhang]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 427217b - (HEAD -> master, origin/master, origin/HEAD) Adding supported vendor PNs for remote CDB FW upgrade (#418) (2 hours ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-sairedis
```
* e7ad356 - (HEAD -> master, origin/master, origin/HEAD) [Azp]: Update dash api source from buildimage to submodule (#1330) (17 hours ago) [Ze Gan]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
SNMP query over IPv6 does not work due to issue in net-snmp where IPv6 query does not work on multi-nic environment.
To get around this, if snmpd listens on specific ipv4 or ipv6 address, then the issue is not seen.
We plan to configure Management IP and Loopback IP configured in minigraph.xml as SNMP_AGENT_ADDRESS in config_db., based on changes discussed in https://github.com/sonic-net/SONiC/pull/1457.
##### Work item tracking
- Microsoft ADO **(number only)**:26091228
#### How I did it
Modify minigraph parser to update SNMP_AGENT_ADDRESS_CONFIG with management and Loopback0 IP addresses.
Modify snmpd.conf.j2 to use SNMP_AGENT_ADDRESS_CONFIG table if it is present in config_db, if not listen on any IP.
Main change:
1. if minigraph.xml is used to configure the device, then snmpd will listen on mgmt and loopback IP addresses,
2. if config_db is used to configure the device, snmpd will listen IP present in SNMP_AGENT_ADDRESS_CONFIG if that table is present, if table is not present snmpd will listen on any IP.
#### How to verify it
config_db.json created from minigraph.xml for single asic VS image with mgmt and Loopback IP addresses.
```
"SNMP_AGENT_ADDRESS_CONFIG": {
"10.1.0.32|161|": {},
"10.250.0.101|161|": {},
"FC00:1::32|161|": {},
"fec0::ffff:afa:1|161|": {}
},
.....
snmpd listening on the above IP addresses:
admin@vlab-01:~$ sudo netstat -tulnp | grep 161
tcp 0 0 127.0.0.1:3161 0.0.0.0:* LISTEN 71522/snmpd
udp 0 0 10.250.0.101:161 0.0.0.0:* 71522/snmpd
udp 0 0 10.1.0.32:161 0.0.0.0:* 71522/snmpd
udp6 0 0 fec0::ffff:afa:1:161 :::* 71522/snmpd
udp6 0 0 fc00:1::32:161 :::* 71522/snmpd
```
#### Why I did it
src/sonic-sairedis
```
* cd41369 - (HEAD -> master, origin/master, origin/HEAD) [Link Event Damping] Serialization/deserialization logic for link event (#1322) (2 days ago) [Ashish Singh]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-restapi
```
* 24d440f - (HEAD -> master, origin/master, origin/HEAD) [build] Fix Makefile didn't set go build target file. #151 (39 minutes ago) [Liu Shilong]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Signed-off-by: Nazarii Hnydyn nazariig@nvidia.comCloses#17345
This W/A was proposed by Nvidia FRR team before the long term solution is ready.
Why I did it
A W/A to fix default route installation during LAG member flap
Work item tracking
N/A
How I did it
Disabled FRR next hop group support
How to verify it
Do LAG member flap
### Why I did it
1. Protobuf 3.21 has been released in the Debian bookworm
2. Update submodule sonic-swss and sonic-dash-api because they include related updates.
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
1. In the protobuf.mk, If it isn't bullseye, ignore to compile the protobuf package
2. Move sonic-swss commits:
```
fd852084 (HEAD, origin/master, origin/HEAD) [dashrouteorch]: Rename dash route namespace (#2966)
```
3. Move sonic-dash-api and move build chain to its submodule
```
d4448c7 (HEAD, origin/master, origin/HEAD, master) [azp]: Add multi-platform artifacts (#11)
8a5e5cc [debian]: Add debian package (#10)
d96163a [misc]: Add dash utils and its tests (#9)
```
#### How to verify it
Check Azp
Fix can't access IPV6 address via management interface because 'default' route table does not add to route lookup issue.
#### Why I did it
When device set with IPV6 TACACS server address, and shutdown all BGP, device can't connect to TACACS server via management interface.
After investigation, I found the IPV6 'default' route table does not add to route lookup:
admin@vlab-01:~$ ip -6 rule list
1001: from all lookup local
32765: from fec0::ffff:afa:1 lookup default
32766: from all lookup main
admin@vlab-01:~$
As compare:
admin@vlab-01:~$ ip -4 rule list
1001: from all lookup local
32764: from all to 172.17.0.1/24 lookup default
32765: from 10.250.0.101 lookup default
32766: from all lookup main
32767: from all lookup default <== 'default' route table exist in IPV4 route lookup
Issue fix by add 'default' route table to route lookup with following command:
admin@vlab-01:~$ sudo ip -6 rule add pref 32767 lookup default
admin@vlab-01:~$ ip -6 rule list
1001: from all lookup local
32765: from fec0::ffff:afa:1 lookup default
32766: from all lookup main
32767: from all lookup default <== 'default' route table been added to IPV6 route lookup
admin@vlab-01:~$
##### Work item tracking
- Microsoft ADO: 25798732
#### How I did it
When management interface using 'default' route table, add 'default' route table to IPV6 route lookup.
#### How to verify it
Pass all UT.
Add new UT to cover this change.
Manually verify issue fixed:
### Tested branch (Please provide the tested image version)
- [x] master-17281.417570-2133d58fa
#### Description for the changelog
Fix can't access IPV6 address via management interface because 'default' route table does not add to route lookup issue.
#### Why I did it
src/sonic-platform-common
```
* d09e009 - (HEAD -> master, origin/master, origin/HEAD) APIs to help in finding NPU SI settings (#410) (18 minutes ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-host-services
```
* e8ae2af - (HEAD -> master, origin/master, origin/HEAD) [featured]: Add database services for DPU (#84) (24 hours ago) [Ze Gan]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
To fix the EVPN type5 failure seen in FRR when there are multipaths for nexthop. The type5 routes were queued
show ip route vrf Vrf1
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF Vrf1:
B>q 5.5.5.0/24 [200/0] via 30.0.0.2, Vlan100 onlink, weight 1, 00:00:40
q via 40.0.0.3, Vlan100 onlink, weight 1, 00:00:40
C>* 10.0.0.0/24 is directly connected, Vlan10, 00:00:43
B>q 100.0.0.0/24 [200/0] via 30.0.0.2, Vlan100 onlink, weight 1, 00:00:40
q via 40.0.0.3, Vlan100 onlink, weight 1, 00:00:40
Work item tracking
Microsoft ADO (number only):
How I did it
Porting the FRR fixFRRouting/frr#14835
How to verify it
Validated EVPN multipath with the scenario and confirmed its working.
The format of the media_settings.json file was updated to support the Port SI Per Speed Enhancements. Since media_checker is the validator for the media_settings.json file, it needs to be updated to align with the new format.
How I did it
I added six new SI parameter names introduced as part of the Port SI Per Speed Enhancements. Additionally, I implemented handling for the new hierarchy level (lane_speed_key) in the updated media_settings.json format while maintaining backward compatibility with vendors whose JSON does not support port SI per speed.
How to verify it
I locally built the Debian package using 'make target/debs/bullseye/sonic-device-data_1.0-1_all.deb,' and it completed successfully. Jenkins also built the entire image, which includes the media_checker as part of its process.
* Update sonic-utilities to master branch version
sonic-utilities was (intentionally) pointing to a commit on a fork,
since merging sonic-utilities's changes for Bookworm first onto the
master branch would result in PR checker failures. Now that
sonic-buildimage is on master branch and the Bookworm changes in
sonic-utilities have been merged into master, sonic-utilties can now
point to master.
17e77fe2 Revert "Run yang validation in unit test (#3025)" (#3055)
96dd5559 [dhcp_relay] Fix dhcp_relay counter display issue (#3054)
6dfeee69 [sflow][db_migrator] Egress Sflow support (#3020)
02a588b7 Don't collect /proc/sched_debug
d7ec3251 Fix error about having a mutable default for field headers in dataclass
0ab3ab91 Fix test execution on Bookworm (#3041)
ef8f6f83 Specify test dependencies under extra_requires
61c44e80 Update python packages
1e813105 [wol] Implement wol command line utility (#3048)
8ebc56a0 [sonic_installer]: Improve exception handling: introduce notes. (#3029)
3610ce93 [sonic-package-manager] Fix YANG validation failure on upgrade when feature has constraints in YANG model on FEATURE table (#2933)
cfd2dd39 Add container rsyslog.conf to the sys dump (#3039)
c4b07828 Support new platform in generic configuration update (#3038)
a8d236c8 [fast-reboot-filter-routes.py] Remove click and improve error reporting (#3030)
75199c0f [sonic-package-manager] insert newline in /etc/sonic/generated_services.conf (#3040)
cd855698 [VOQ][saidump] Modify generate_dump: replace save_saidump with save_saidump_by_route_size (#2972)
f1e24ae5 GCU support for Cisco-8000 features (#3010)
67e1c3dc Update GCU rsyslog validator (#3012)
253b7975 [sonic-package-manager] do not modify config_db.json (#3032)
177dd8e8 [sonic-package-manager] add generated service to /etc/sonic/generated_services.conf (#3037)
62fcd77a Configure NTP according to extended configuration (#2835)
ced09404 [dualtor_neighbor_check] Adjust zero-mac check condition (#3034)
a4eeb698 [config] config reload should generate sysinfo if missing (#3031)
e01fc891 Run yang validation in unit test (#3025)
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
src/sonic-host-services
```
* 445ec8b - (HEAD -> master, origin/master, origin/HEAD) Revert "Add support to make determine/process reboot-cause services restartable (#86)" (#89) (31 hours ago) [anamehra]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* e2d9f87 - (HEAD -> master, origin/master, origin/HEAD) Add dynamic sensor logic for fixed and psu presence/state checking in thermalctld (#401) (27 hours ago) [Gregory Boudreau]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 14408ca3 - (HEAD -> master, origin/master, origin/HEAD) [Chassis][master][orchagent] : Added test case to verify WRED profile on system ports (#2954) (9 hours ago) [vmittal-msft]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-mgmt-common
```
* d96bfcd - (HEAD -> master, origin/master, origin/HEAD) YANG tree generator and linter (#113) (6 hours ago) [faraazbrcm]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 2efe97e - (HEAD -> master, origin/master, origin/HEAD) Fix VDM freeze and unfreeze needed for PM stats collection (#402) (3 hours ago) [jaganbal-a]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-sairedis
```
* 9621316 - (HEAD -> master, origin/master, origin/HEAD) [syncd] Remove notify pointers manual handling (#1326) (19 hours ago) [Kamil Cudnik]
```
#### How I did it
#### How to verify it
#### Description for the changelog
This change was submitted directly to 202205 but it's also needed in master and 202305 with SAI9.x
#13346
There has been a couple CSPs for this as well:
CS00012273013 - [7.1][J2, J2c+] Disable SA Equals DA trap on DNX
CS00012320965 - SAI9.2: iBGP doesn't work due to SA_EQUALS_DA trap
If SA_EQUALS_DA trap is enabled iBGP won't work as the Ethernet-IB0 ports are expected to get packets with SA==DA.
In the VOQ chassis design, for outgoing control plane packets, the packets goes the recycle port for routing, therefore the dmac of the packet should be the asic router mac. The source mac is assigned by the kernel, so it is also the asic router mac.
Why I did it
sonic_dhcp_server.whl contains not only dhcp_server functionality but also part of dhcp_relay functionality, the existing naming is not appropriate.
#### Why I did it
src/sonic-sairedis
```
* 4ee9c25 - (HEAD -> master, origin/master, origin/HEAD) Add TestSwitch missing attribute (#1327) (12 hours ago) [noaOrMlnx]
* 4cbbeed - Add SAI Notification support for host_tx_ready (#1307) (18 hours ago) [noaOrMlnx]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss-common
```
* 8dc6218 - (HEAD -> master, origin/master, origin/HEAD) Add STATE_TRANSCEIVER_INFO_TABLE_NAME to shcema.h (#824) (12 hours ago) [noaOrMlnx]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-mgmt-common
```
* 268b67c - (HEAD -> master, origin/master, origin/HEAD) Integrating the transformer infra GET optimization, Request context cancel handling and other bug fixes (#111) (2 hours ago) [Balachandar Mani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Modify j2 template files in docker-dhcp-relay. Add dhcprelayd to group dhcp-relay instead of isc-dhcp-relay-VlanXXX, which would make dhcprelayd to become critical process.
In dhcprelayd, subscribe FEATURE table to check whether dhcp_server feature is enabled.
2.1 If dhcp_server feature is disabled, means we need original dhcp_relay functionality, dhcprelayd would do nothing. Because dhcrelay/dhcpmon configuration is generated in supervisord configuration, they will automatically run.
2.2 If dhcp_server feature is enabled, dhcprelayd will stop dhcpmon/dhcrelay processes started by supervisord and subscribe dhcp_server related tables in config_db to start dhcpmon/dhcrelay processes.
2.3 While dhcprelayd running, it will regularly check feature status (by default per 5s) and would encounter below 4 state change about dhcp_server feature:
A) disabled -> enabled
In this scenario, dhcprelayd will subscribe dhcp_server related tables and stop dhcpmon/dhcrelay processes started by supervisord and start new pair of dhcpmon/dhcrelay processes. After this, dhcpmon/dhcrelay processes are totally managed by dhcprelayd.
B) enabled -> enabled
In this scenaro, dhcprelayd will monitor db changes in dhcp_server related tables to determine whether to restart dhcpmon/dhrelay processes.
C) enabled -> disabled
In this scenario, dhcprelayd would unsubscribe dhcp_server related tables and kill dhcpmon/dhcrelay processes started by itself. And then dhcprelayd will start dhcpmon/dhcrelay processes via supervisorctl.
D) disabled -> disabled
dhcprelayd will check whether dhcrelay processes running status consistent with supervisord configuration file. If they are not consistent, dhcprelayd will kill itself, then dhcp_relay container will stop because dhcprelayd is critical process.
Why I did it
Fixing CVEs CVE-2023-46752 CVE-2023-46753 CVE-2023-47234 CVE-2023-47235
Work item tracking
Microsoft ADO (number only):
How I did it
Porting the fixes in the below PRs
FRRouting/frr#14645FRRouting/frr#14716
How to verify it
Running regression
