Update SDK 4.4.1956 and FW *.2008.1956
Bugs fixes:
1. Link | Clear operational speed when link is not active
2. Spectrum-2, SN3800 | On rare occasion, link flapping due to bad BER causes traffic loss
3. Spectrum-3 | On rare occasion, link flapping due to bad BER causes traffic loss as a result of new PAM4 link maintenance flow on Spectrum-3 devices
4. Shared Buffers | On rare occasion, modifying shared buffers on a system with split port while traffic is running may cause the firmware to get stuck
5. Spectrum-3, SN4700 | Fence may fail while running 400GbE 8x port when modifying mirror session configurations under traffic
- SN3800 vs Cisco9236 - no link copper or optics - start sending IDLE before PHY_UP for specific OPNs
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
SAI:
Fix ECMP max groups logic
add set issu log level for spc2/spc3, as now issu is supported
set vlan max swid = 0 on sdk init, as only single swid is needed, for efficient resource usage
Fix traffic lost during FFB related to buffer config + optimize buffer config timing for FB
Add ACL fields BTH, IP flags
Add ACL infrastructure of different fields per ASIC type
Add port stat ether rx/tx oversize pkts
SDK/FW:
Added support for Finisar 100GbE SWDM Transceiver FTLC9152RGPL.
Spectrum-2 Added support for 10G BaseT modules
Added link LED support for SN4600C.
Counters | In SDK debug dump, the incorrect counter type appears for vtraps.
WJH | Without any traffic or events on the idle system, the CPU load is constantly above 4%
WJH | WJH filter currently cannot filter by PORT for buffer drop reason.
Spectrum | ACL, Unbind, Lazy Delete | Running Lazy Delete together with auto_unbind may cause rate condition errors. To work work with Lazy Delete use new INIT parameter "acl_manual_unbind" so that ACLs will notbe removed automatically when binding point is deleted.
Spectrum | ISSU | In ISSU mode, when querying for the number of configurable buffers, using the API sx_api_cos_port_buff_type_get with the count parameter as 0, the API returns the number for NORMAL mode instead.
Spectrum-2 | BER | BER monitor counts raw errors instead of effective errors
Spectrum-2 | BER | Connecting to ConnectX-5 adapter card with copper splitter cable MCP7H50-V001R30 in 1
Spectrum-2 | Cables | Link flaps in 200GbE with AOM Optic cable MMA1T00-VS
Spectrum-3 | Speeds, Link | When moving from a 400GbE link to a 1GbE link, packets may drop for 1msec right after link up
Spectrum-3 | Cables, Speeds | Using 400GbE with 3rd party systems is not supported
Spectrum-3 | LAG | After a while, LAG members become out of sync with one another
Spectrum-3 | VLAN, Ports | Packets with VLAN headers are sent to
Update SAI/SDK/FW and MSN4700 device files to support 8 lanes 400G
Update SAI to 1.16.3
Update SDK to 4.4.0914
Update FW to *.2007.1112
Update MSN4700 device files to support 8 lanes 400G
update FW to xx_2000_3298
update SAI to 1.16.0
update Spectrum-1 and Spectrum-2 buffer pool size according to the new SDK default config change.
modified: ../../device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/buffers_defaults_t0.j2
modified: ../../device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/buffers_defaults_t1.j2
modified: ../../device/mellanox/x86_64-mlnx_msn3700-r0/ACS-MSN3700/buffers_defaults_t0.j2
modified: ../../device/mellanox/x86_64-mlnx_msn3700-r0/ACS-MSN3700/buffers_defaults_t1.j2
modified: fw.mk
modified: mlnx-sai.mk
modified: mlnx-sai/SAI-Implementation
modified: sdk-src/sx-kernel/Switch-SDK-drivers
modified: sdk.mk
signed-off by kebol@mellanox.com
Integrating official Mellanox SDK/FW release as a pre condition for getting new Mellanox SAI release with hash changes (inner field) and 3k VXLAN scale. As well as bug fix for Spectrum LP mode and Spectrum 2 PFC WD
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
* [submodule] update sonic-linux-kernel
* update linux kernel version
* Fix many version strings
* update mellanox components (built with new kernel)
* [mlnx] add make files for SDK WJH libs
* Update arista driver submodule (#8)
Make the debian packaging point to a newer kernel version.
- Update SAI (added support of SN2740 profile).
- Update SDK to version 4.2.3130.
- Update FW to version 13.1224.0140.
- Update HW MGMT to version 1.0.0160.
* Build improvements
Fix dependencies
Add configuration options
Automatically build sonic-slave
* Set default number of jobs to 1
* Auto generate target/debs directory
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Automatically remove sonic-slave container after exit
* Silence clean-logs
* Add SONIC_CLEAN_TARGETS to clean
* Use second expansion for clean dependencies
* Avoid creating empty log files
Remove log file on flush instead of writing empty string
* Put dpkg install inside lock
Use same lock as debian install targets do to avoid
race condition in dpkg installation
* Remove redirect to log from docker save
* Add .platform dependency to all and clean targets
* Remove header and footer from clean targets
* Disable messages for SONIC_CLEAN_TARGETS
* Exit with error if dpkg-buildpackage fails
* Set new location for debs in build_debian.sh
* Add recipe for docker-database
* Update redis version to 3.2.4
* Add support for p4 platform
* Add recipe for snmpd
* Add slave targets to phony and make all target default
* Remove build.sh from thrift
* Add versioning to team, nl, hiredis and initramfs
* Change sonic-slave to support snmpd build from sources
* Remove src/tenjin
* Add recipe for lldpd
* Add recipe for mpdecimal
* Remove hiredis directory on rebuild
* Add recipe for Mellanox hw management
* Remove generic image from all targets for Mellanox
* Add support for python wheels
* Add lldp and snmp dockers
* Sync docker-database to include libjemalloc
* Fix asyncsnmp variable name
* Change default build configuration
Redirect output to log files by default
Set number of jobs to nproc value
Do not print dependencies
Fix logging to print log of failed job into console
* Use docker inspect to check if sonic-slave image exists
* Use config in slave.mk directly
* Disable color output by default
* Remove sswsdk dependency from lldp and snmp dockers
* Fix comment in py wheels install targets
* Add dependency between two versions of sswsdk
* Add containers to mellanox platform
lldp, snmp and database containers
* Add recipe for team docker
* Add team docker to mellanox platform
* Encrypt password passed to build_debian.sh
* Update mellanox SAI version
Make version and revision setting only in main recipe
* Fix error handling in makefiles
As makefiles use .ONESHELL we should add -e
option to shell options in order to exit after any command fails
* Add recipe for platform monitor image
* Add platfotm monitor to mellanox targets
* Ignore submodules when building base image
