Commit Graph

35 Commits

Author SHA1 Message Date
lguohan
f3ca7c422f
[rsyslog]: use # to separate container name and program name in syslog message (#1918)
Previously use / to separate container name and program name.

However, in rsyslogd:

Precisely, the programname is terminated by either (whichever occurs first):

end of tag
nonprintable character
‘:’
‘[‘
‘/’
The above definition has been taken from the FreeBSD syslogd sources.

Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-12 22:23:58 -07:00
Qi Luo
7ba08e5bf6
Prefix docker container name to syslog syslogtag (program name) (#1810) 2018-06-25 10:48:42 -07:00
pavel-shirshov
a2a6aead4c [bgp]: Enable bgp soft-reconfiguration inbound for quagga templates (#1803)
* Enable bgp soft-reconfiguration inbound for quagga templates
2018-06-22 18:04:18 -07:00
pavel-shirshov
bbca58329b
Manually send SIGHUP to vtysh when the current session was disconnected (#1801)
* Manually send SIGHUP to vtysh when the current session was disconnected

* Address comments
2018-06-20 12:15:09 -07:00
Qi Luo
1c8bacb007
Fix comment typos (#1794)
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
2018-06-14 21:53:31 -07:00
pavel-shirshov
fae346f586
Don't create a pty to run vtysh inside of the docker container (#1792) 2018-06-14 12:11:29 -07:00
Joe LeVeque
832be7b8f4
[dockers] Prevent apt-get from installing suggested and recommended packages by default (#1666)
* [docker-base] Instruct apt-get to NOT install 'recommended' or 'suggested' packages

* Modify docker-fpm-quagga, docker-snmp-sv2 and docker-sonic-vs Dockerfile templates in order to properly install .deb dependencies

* REDIS_SERVER depends on REDIS_TOOLS; ensure REDIS_TOOLS is always installed before REDIS_SERVER
2018-05-02 11:46:21 -07:00
Taoyu Li
bebb7a0fa2 [zebra.conf] Fix template issue with multiple lo addresses (#1662)
* [zebra.conf] Fix template issue with multiple lo addresses

* Add unitest for Loopback1
2018-05-01 20:53:47 -07:00
pavel-shirshov
1ae4db3af7
Quagga: Use bgp keepalive and holdtime timers from configdb (#1661) 2018-04-30 16:52:22 -07:00
pavel-shirshov
f43580492f
quagga container processes could be restarted within a second (#1541) 2018-03-28 12:34:46 -07:00
Joe LeVeque
e1cb2ace36 [base image files] All 'docker exec' wrapper scripts now dynamically adjust their flags depending on whether or not they are run on a terminal (#1507) 2018-03-17 00:43:29 -07:00
Taoyu Li
dd7e9240c8 [dockers] Remove dependency to minigraph (#1179)
* Remove dependency to minigraph

* Remove -m in swssconfig.sh
2017-11-23 16:31:37 -08:00
nikos-li
f18ed0d35c [bgp]: Auto-completion, help (?), cmd navigation (up arrow) not working in vtysh on host system. (#1124) 2017-11-13 09:39:10 -08:00
Taoyu Li
8bc6b55331 [bgpd.conf] Fix template issue with multiple lo addresses (#1060) 2017-10-20 07:15:11 -07:00
Taoyu Li
7a0a2ea5d0 [bgpd.conf] Advertise /64 prefix for ipv6 lo addresses (#1050) 2017-10-17 18:28:27 -07:00
pavel-shirshov
9139c7fe64 Always start with Forwarding State flag set for bgpd (#963) 2017-09-19 12:27:18 -07:00
Shuotian Cheng
aa549f208c [bgp]: Fix the deployment_id with DEVICE_METADATA (#962) 2017-09-18 13:04:29 -07:00
Taoyu Li
2e3975d6ed [config] Fix an issue that bgp asn data type is not consistent (#953)
* Fix an issue that bgp asn data type is not consistent from minigraph parser and DB

* Fix test typo
2017-09-13 21:23:06 -07:00
Taoyu Li
c9cc7aea41 [configdb] Migrate minigraph configurations to DB (#942)
Modify minigraph parser output format so it fit DB schema
Modify configuration templates to fit new schema
Systemd services dependencies are modified so database starts before any configuration consumer
2017-09-12 14:13:27 -07:00
sihuihan88
127a73aac3 [quagga]: Disable ipv4 over ipv6 and enable ipv6 over ipv4 peer group (#922)
* [bgpd]:disable ipv4 over ipv6 and enable ipv6 over ipv4 peer group

* update as comments
2017-08-30 13:06:02 -07:00
Taoyu Li
e4502527d0 Revert "Migrate DEVICE_METADATA to db (#919)" (#928)
This reverts commit 44502b217b.
2017-08-29 17:03:31 -07:00
Taoyu Li
44502b217b Migrate DEVICE_METADATA to db (#919) 2017-08-29 10:47:25 -07:00
Joe LeVeque
ed66588473 [docker-fpm-quagga]: Manage Quagga processes (zebra, bgpd) using supervisor instead of watchquagga (#900) 2017-08-21 13:55:59 -07:00
zhenggen-xu
c52e876697 Fix the network command for ipv6 vlan interfaces (#894) 2017-08-16 21:12:32 -07:00
Taoyu Li
a2fe0212be [ConfigDB] Move all BGP configuration into DB (#861)
- BGP data read from minigraph.py now match DB schema
- BGP templates are updated
- bgpcfgd can now deal with runtime neighbor create/delete
2017-08-08 16:23:58 -07:00
Taoyu Li
b6efe438b5 Introduce ConfigDB (#808)
* [cfggen] Support reading from and writing to configdb
* [bgp] Move bgp_admin_state to configdb, support dynamic admin state change
* [sonic-utilities] Adapt configDB for admin status, support config save and config load
2017-08-01 19:02:00 -07:00
sihuihan88
1176508858 [bgpd]: support multiple peer range in single peer group (#807) 2017-07-13 15:03:10 -07:00
Joe LeVeque
f49cac086f Remove extra trailing newlines at EOF (#804)
Files now end with a single newline
2017-07-12 20:54:37 -07:00
lguohan
4bdcac8e4f [bgp]: move allowas-in into ipv6 section to enable allowas-in for ipv6 (#741) 2017-06-22 19:50:24 -07:00
sihuihan88
3268946de5 [BGPD]: add bgp dynamic neighbor configuration (#708)
* add bgp dynamic neighbor configuration

* [bgpd]: update as comments

* update as comment

* update to deployment_id_asn_map

* minor change
2017-06-21 18:52:50 -07:00
Taoyu Li
95906a6490 [installer] Copy old config files rather than only minigraph (#730) 2017-06-21 11:02:25 -07:00
Taoyu Li
5e6620e19e [bgp] Save bgp admin state (#690)
* [bgp] Save admin state and set default state to shutdown

* Set default behavior to no shutdown

* Add build option SHUTDOWN_BGP_ON_START

* Script change for default admin state to be on

* Address CR comments to bgp_neighbor script

* Fix script bug
2017-06-12 11:05:22 -07:00
Joe LeVeque
d5c13c0a83 [dockers]: Disable autorestart on all supervisor processes inside containers (#580) 2017-05-09 17:37:08 -07:00
Joe LeVeque
8f348399f5 [Dockers]: Manage all Docker containers with Supervisord (#573)
- Consolidate config.sh and start.sh scripts into one script (start.sh)
 - Solve issue #435 - All dockers now run supervisord as their ENTRYPOINT
 - All stdout/stderr output from processes managed by supervisord is now sent to syslog instead of their own files
 - Supervisord log messages are now also sent to syslog
 - Removed unused smartmontools package from docker-platform-monitor
2017-05-08 15:43:31 -07:00
Rodny Molina
d30fbf1d72 [build]: Adding support for Free-Range-Routing stack. (#510)
- Extending SONiC building infrastructure to provide users
           with greater flexibility, by allowing them to elect a
           routing-stack different than the default one (quagga). The desired
           routing-stack will be defined in rules/config file.

         - As part of these changes I'm adding support for
           Free-Range-Routing (FRR) stack. Quagga will continue to be
           the default routing-stack.

Signed-off-by: Rodny Molina <rodny@linkedin.com>
2017-04-20 09:12:27 -07:00