Why I did it
Ragile adapter ra-b6510-32c ra-b6510-48v8c ra-b6910-64c ra-b6920-4s to kernel 5.x
Signed-off-by: “pettershao” pettershao@ragilenetworks.com
- Why I did it
In case of warm/fast reboot, the hardware reboot cause will NOT be cleared because CPLD will not be touched in this flow. To not confuse the reboot cause determine logic, the leftover hardware reboot cause shall be skipped by the platform API, platform API will return the 'REBOOT_CAUSE_NON_HARDWARE' instead of the "hardware" reboot cause.
- How I did it
Check the proc cmdline to see whether the last reboot is a warm or fast reboot, if yes skip checking the leftover hardware reboot cause.
- How to verify it
a. Manual test:
- Perform a power loss
- Perform a warm/fast reboot
- Check the reboot cause should be "warm-reboot" or "fast-reboot" instead of "power loss"
b. Run reboot cause related regression test.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Enable Test sai api on bfn container with a lightweight container(saiserver).
How I did it
enable saiserver container on barefoot platform.
add docker-saiserver-bfn.mk for building saiserver container
in platform/barefoot/docker-saiserver-bfn, add necessary files that needs in saiserver container
How to verify it
Tested on Intel platform ec9516
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
- Why I did it
Support syslog rate limit configuration feature
- How I did it
Remove unused rsyslog.conf from containers
Modify docker startup script to generate rsyslog.conf from template files
Add metadata/init data for syslog rate limit configuration
- How to verify it
Manual test
New sonic-mgmt regression cases
- Why I did it
In order to prevent the sonic-mgmt/tests/platform_tests/sfp/test_sfputil.py test failing on the log analyzer step.
The mentioned test is performing the sfputil reset EthernetX for every interface on the SONiC switch, this action will flap the SFP device status (INSTERTED -> REMOVED -> INSTERTED).
The SONiC XCVRD daemon will catch this SFP device status change (because it is monitoring the presence status of the cable).
To judge the cable presence status, currently, we are still leveraging to read the first bytes of the EEPROM, and the EEPROM could be not ready at some moment and the SONiC XCVRD daemon will print the error log to Syslog:
ERR pmon#xcvrd: Error! Unable to read data for 'xx' port, page 'xx' offset 128, rc = 1, err msg: Sending access register
- How I did it
Change logging severity from ERR to WARNING
- How to verify it
Run the sonic-mgmt/tests/platform_tests/sfp/test_sfputil.py
OR much faster way to run the next script on the switch:
#!/bin/bash
START=0
END=248
for (( intf=$START; intf<=$END; intf+=8))
do
sfputil reset Ethernet"${intf}"
done
sfputil show presence
- Why I did it
Following code to judge whether a process is running inside a docker could get stuck on the simx platform
subprocess.Popen(["docker", "--version"],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
universal_newlines=True)
When it gets stuck, the config-chassisdb service can not be successfully started, thus the system can not be booted up.
root@sonic:/# service config-chassisdb status
config-chassisdb.service - Config chassis_db
Loaded: loaded (/lib/systemd/system/config-chassisdb.service; enabled; vendor preset: enabled)
Active: activating (start) since Thu 2022-12-15 09:23:02 UTC; 29min ago
Main PID: 571 (config-chassisd)
Tasks: 14 (limit: 9501)
Memory: 132.4M
CGroup: /system.slice/config-chassisdb.service
├─571 /bin/bash /usr/bin/config-chassisdb
├─575 /usr/bin/python3 /usr/local/bin/sonic-cfggen -H -v DEVICE_METADATA.localhost.platform
├─602 /bin/sh -c sudo decode-syseeprom -m
├─603 sudo decode-syseeprom -m
├─607 /usr/bin/python3 /usr/local/bin/decode-syseeprom -m
├─616 /bin/sh -c docker --version 2>/dev/null
└─617 docker --version
- How I did it
Use an alternative way to implement this function and issue can be avoided:
docker_env_file = '/.dockerenv'
return os.path.exists(docker_env_file) is False
- How to verify it
run regression on real hardware and simx platform.
Why I did it
Add two platform that support s3IP framework
How I did it
Add two platforms supporting S3IP SYSFS (TCS8400, TCS9400)
How to verify it
Manual test
Adding platform support for FS s5800-48t4s and s5800-48t8s-mars8p.
Both s5800-48t4s and s5800-48t8s-mars8p have 48 * 10/100/1000 Base-T ports, 4 * 10GE SFP+ Ports on Centec TsingMa.
s5800-48t4s is different from s5800-48t8s-mars8p in that:
The phy chip used by s5800-48t4s is Marvell 88e1680;
The phy chip used by s5800-48t4s-mars8p is Centec ctc21108;
Why I did it
Fixes#12634
Observing the following error while running 'sfputil show lpmode' command.
AttributeError: 'Sfp' object has no attribute 'get_power_set'
Root Cause: get_power_set() is defined for QSFP28 and QSFP+ i.e. Sff8636 and Sff8634. However, the function is not defined in the optoe_base class.
How I did it
To use get_power_set(), we need to initialise the 'api' via get_xcvr_api() and then use it to run get_power_set().
- Consolidating multiple read functions in a PSU driver on the basis of byte, word or block read,
- Enhancing PDDF parsing script support for CPU and PCH temperature reading,
- Adding missing methods in PDDF common APIs
Why I did it
- PSU driver changes are to optimize the code and increase the code coverage
- PDDF parser script enhancements to accommodate the CPU and PCH temp reading using hwmon device path
- Some of the new APIs were missing from the PDDF common platform classes
How I did it
Added code changes and verified them on AS7816 adn AS7726 platforms.
Why I did it
Provide CPLD and FPGA driver framework that complies with s3ip sysfs specification
How I did it
1、 The framework module provides register and unregister interface and implementation.
2、 The framework will help you create the sysfs node
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Update ECMP calculator README file with new instructions how to run the calculator.
How I did it
Update README file.
How to verify it
Read README file.
docker-sonic-vs doesn't have the infra needed for the syslog rate limit
configuration, so it's not going to be rendering jinja templates to
overwrite /etc/rsyslog.conf. This also means that syslog messages would
get logged twice (because both the default /etc/rsyslog.conf file and
/etc/rsyslog.d/50-default.conf are telling it to log to syslog).
Therefore, keep the custom static /etc/rsyslog.conf file for docker-sonic-vs.
Fixessonic-net/sonic-swss#2570.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
How I did it
1、 demo driver will call the s3ip kernel framework interface
How to verify it
run the demo ,it will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
The user framework module complies with s3ip sysfs specification
How I did it
1、 create a s3ip_sysfs service
2、 the s3ip_sysfs service call the “s3ip_sysfs_tool.sh” to install kernel module and run s3ip_load.py
3、 s3ip_load.py will parse the s3ip_sysfs_conf.json configuration file and create /sys_switch/ directory
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Provide slot and switch_rootsysfs driver framework that complies with s3ip sysfs specification
How I did it
1、 The framework module provides register and unregister interface and implementation.
2、 The framework will help you create the sysfs node
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Provide SYSLED and watchdog driver framework that complies with s3ip sysfs specification
How I did it
1、 The framework module provides register and unregister interface and implementation.
2、 The framework will help you create the sysfs node
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Provide a sensor driver framework that complies with s3ip sysfs specification
How I did it
1、 The framework module provides register and unregister interface and implementation.
2、 The framework will help you create the sysfs node
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Provide a transceiver driver framework that complies with s3ip sysfs specification
How I did it
1、 The framework module provides register and unregister interface and implementation.
2、 The framework will help you create the sysfs node
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Provide a Fan driver framework that complies with s3ip sysfs specification
How I did it
1、 The framework module provides register and unregister interface and implementation.
2、 The framework will help you create the sysfs node
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Provide a PSU driver framework that complies with s3ip sysfs specification
How I did it
1、 The framework module provides register and unregister interface and implementation.
2、 The framework will help you create the sysfs node
How to verify it
A demo driver base on this framework will display the sysfs node wich conform to the s3ip sysfs specification
Why I did it
Platform interface doesn't provide all sensors and using it isn't effective
How I did it
Request sensors via http from BMC server and parse the result
How to verify it
Related daemon in pmon populates redis db, run this command to view the contents
- Why I did it
Remove TODO comments which are no longer needed
- How I did it
Remove TODO comments which are no longer needed
- How to verify it
Only comment change
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Why I did it
How I did it
How to verify it
* 03.Version-cache - framework environment settings
It defines and passes the necessary version cache environment variables
to the caching framework.
It adds the utils script for shared cache file access.
It also adds the post-cleanup logic for cleaning the unwanted files from
the docker/image after the version cache creation.
* 04.Version cache - debug framework
Added DBGOPT Make variable to enable the cache framework
scripts in trace mode. This option takes the part name of the script to
enable the particular shell script in trace mode.
Multiple shell script names can also be given.
Eg: make DBGOPT="image|docker"
Added verbose mode to dump the version merge details during
build/dry-run mode.
Eg: scripts/versions_manager.py freeze -v \
'dryrun|cmod=docker-swss|cfile=versions-deb|cname=all|stage=sub|stage=add'
* 05.Version cache - docker dpkg caching support
This feature caches all the deb files during docker build and stores them
into version cache.
It loads the cache file if already exists in the version cache and copies the extracted
deb file from cache file into Debian cache path( /var/cache/apt/archives).
The apt-install always installs the deb file from the cache if exists, this
avoid unnecessary package download from the repo and speeds up the overall build.
The cache file is selected based on the SHA value of version dependency
files.
Signed-off-by: maipbui <maibui@microsoft.com>
Dependency: [PR (#12065)](https://github.com/sonic-net/sonic-buildimage/pull/12065) needs to merge first.
#### Why I did it
1. `eval()` - not secure against maliciously constructed input, can be dangerous if used to evaluate dynamic content. This may be a code injection vulnerability.
2. `subprocess()` - when using with `shell=True` is dangerous. Using subprocess function without a static string can lead to command injection.
3. `os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content.
4. `is` operator - string comparison should not be used with reference equality.
5. `globals()` - extremely dangerous because it may allow an attacker to execute arbitrary code on the system
#### How I did it
1. `eval()` - use `literal_eval()`
2. `subprocess()` - use `shell=False` instead. use an array string. Ref: [https://semgrep.dev/docs/cheat-sheets/python-command-injection/#mitigation](https://semgrep.dev/docs/cheat-sheets/python-command-injection/#mitigation)
3. `os` - use with `subprocess`
4. `is` - replace by `==` operator for value equality
5. `globals()` - avoid the use of globals()
Why I did it
Initial implementation of Watchdog platform plugin for BMC-based boards
How I did it
How to verify it
Run platform_tests/test_reload_config.py
*Replaced BRCM SDK's psample support flag(PSAMPLE_SUPPORT) with linux kernel psample module support config flag(CONFIG_PSAMPLE) in saibcm-modules.
*Replaced BUILD_PSAMPLE conditioanl check with CONFIG_PSAMPLE to build psample callback library(psample-cb.o), only if psample config is enabled in linux kernel.
*Cleaned up PSAMPLE_SUPPORT related commented code.
Signed-off-by: haris@celestica.com
Signed-off-by: haris@celestica.com
Why I did it
SIGTERM takes more than 10 seconds to be processed, so psud is stopped by SIGKILL, this causes unexpected behavior since data base is not cleared
How I did it
Decorate get_presence api to cancel it on SIGTERM signal in order to avoid long processing.
How to verify it
test_pmon_psud_stop_and_start_status
test_pmon_psud_term_and_start_status
1d53bf4 Skip platform NDK health check two times in watchdog.sh
d68297c Added code to shutdown the channel after the grpc call also fixed the show fp-status command
0769efe Impelemented the module API to return the correct eeprom info for fabric card.
171569c Remove explicit logger identifier for transceiver module operations; use inherited id
6c4d651 Corrected the log messages for firmware install
Signed-off-by: mlok <marty.lok@nokia.com>
- Why I did it
Added ECMP calculator tool.
- How I did it
New files were added.
- How to verify it
Manual tests performed according to tests chapter in HLD
Automated tests will be added by verification.
Why I did it
support multi-platform device tree for default dtb may not suitable on all vender hardware designs.
How I did it
use onie_platform variable to load device tree blob
Why I did it
smartctl tool is available only in PMON docker. Hence, the tool may be not accessible incase PMON docker goes down.
Using iSMART_64 tool to fetch the SSD firmware version and device model information.
How I did it
Replacing smartctl with iSMART_64.
Signed-off-by: maipbui <maibui@microsoft.com>
Dependency: [https://github.com/sonic-net/sonic-buildimage/pull/12065](https://github.com/sonic-net/sonic-buildimage/pull/12065)
#### Why I did it
`subprocess.Popen()` and `subprocess.run()` is used with `shell=True`, which is very dangerous for shell injection.
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
`getstatusoutput` is dangerous because it contains `shell=True` in the implementation
#### How I did it
Replace `os` by `subprocess`, use with `shell=False`
Remove unused functions
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
The [xml.etree.ElementTree](https://docs.python.org/3/library/xml.etree.elementtree.html#module-xml.etree.ElementTree) module is not secure against maliciously constructed data.
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
`subprocess.getstatusoutput` is dangerous because include shell=True in the implementation
#### How I did it
Remove xml. Use [lxml](https://pypi.org/project/lxml/) XML parsers package that prevent potentially malicious operation.
Replace `os` by `subprocess`
Use command as an array instead of string
Use `getstatusoutput_noshell` in `sonic_py_common` lib
- Why I did it
Add support for compiling Spectrum-4 ASIC firmware to the SONiC image
Add support for Spectrum-4 ASIC firmware upgrade
- How I did it
Update Mellanox fw make files to include Spectrum-4 ASIC firmware binaries.
Update firmware upgrade scripts to be able to detect Spectrum-4 ASIC.
- How to verify it
Run regression tests
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Add SDK hash calculator Debian and update SDK makefile to compile it.
- How I did it
SDK hash calculator Debian will be used by ECMP calculator (PR #12482)
- How to verify it
Compile sonic-buildimage and verify SDK hash calculator Debian exist in target folder.
