Why I did it
When reboot the chassis by issuing "sudo reboot" on Supervisor card. The internal midplane communication xe0 should be shutdown to avoid double reboot on the linecard.
Added a udev link rule to disable the autoneg on AMD xgbe port Xe0 and Xe1 and make the setting in sync with the peer Broadcom greyhound ports.
How I did it
Modify the Nokia-7250IXRE specific reboot script on the Supervisor card to shutdown the internal interface xe0. Also move reboot linecard code to the top of the script to make sure the notification has been send to Linecard before shutdown the xe0 interface.
Introduced a new rule 80-net-by-driver.link to disable the autoneg on the AMD size. This change requires the latest NDK which contains the change to set the autoneg on the xe0 and xe1 port on the Greyhound.
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
Update sonic-platform submodule for Nokia-7250IXRE Platform. This requires the new NDK 22.9.8 and above
How I did it
Update submodule sonic-platform for Nokia-7250IXRE platform.
c9f316e Disparate process and thread-safe protection for MDIPC transport, and refactored presence logic to better align with SfpStateUpdateTask operation
a3486cc Added _get_module_bulk_info() and cache the info for 5 seconds to optimize the chassisd update.
4b2e729 Fixed the nokia_cmd show qfpga help display
7b87049 Fixed the nokia_cmd show midplane helper dispaly.
83eabea Add "nokia_cmd set ndk-monitor-action" and "nokia_cmd set ndk-log-level" commands
8aad7de Add nokia_cmd show ndk-version
d2c55e3 Modify the psu.py and module.py to optimize the psud running time
Signed-off-by: mlok <marty.lok@nokia.com>
1. SONIC 20220531.25 OC Failure: Everflow testcases failing due to SAI orchagent crash
2. SONIC 20220531.25 OC Failure: ACL IPv6 testcases.
3. TPID support
Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
* Support ACL interface type BmcData in minigraph parser
* Support ACL interface type BmcData in minigraph parser
* add unittest
* Add a global dict for storing the defination of custom acl tables
Fix per-command authorization failed issue when a command with wildcard match more than hundred files.
#### Why I did it
When user enable TACACS per-command authorization, and run a command with wildcard , if the command match more than hundreds of files, the per-command authorization will failed with following message:
*** authorize failed by TACACS+ with given arguments, not executing
The root cause of this issue is because bash will match files with wildcard and replace with wildcard args with matched files. when there are too many files, TACACS plugin will generate a big authorization request, which will be reject by server side.
##### Work item tracking
- Microsoft ADO **(number only)**: 18074861
#### How I did it
Fix bash patch file, use original user inputs as authorization parameters.
#### How to verify it
Pass all UT.
Create new UT to validate the TACACS authorization request are using original command arguments.
UT PR: https://github.com/sonic-net/sonic-mgmt/pull/8115
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [X] 202205
- [X] 202211
#### Tested branch (Please provide the tested image version)
- [x] 202205.258490-412b83d0f
- [x] 202211.71966120-1b971c54b5
#### Description for the changelog
Fix per-command authorization failed issue when a command with wildcard match more than hundred files.
* yang mode support for neighbor metadata
* add description in leaf node
* modify description
Co-authored-by: jcaiMR <111116206+jcaiMR@users.noreply.github.com>
Why I did it
Backport PR #14907 to 202205 branch
In order to reduce sonic build time, there is an option to acquire sonic slave docker(s) from artifact server (reduce sonic make configure time).
Current implementation supports only convention of:
<REGISTRY_SERVER>:<REGISTRY_PORT>/<SLAVE_BASE_IMAGE>:<SLAVE_BASE_TAG>
In case the SLAVE_BASE_IMAGE appear in internal path inside the server, the convention should be like that:
<REGISTRY_SERVER>:<REGISTRY_PORT><REGISTRY_SERVER_PATH>/<SLAVE_BASE_IMAGE>:<SLAVE_BASE_TAG>
When REGISTRY_SERVER_PATH (that is set on rules/config) will have to start with "/".
If REGISTRY_SERVER_PATH will not be set, the behavior will remain the same it works today.
Work item tracking
Microsoft ADO (number only):
How I did it
Add ability to set REGISTRY_SERVER_PATH and update the code for docker image tag and docker image pull accordingly
How to verify it
Use sonic slave docker image from artifact server in which the image is kept in internal folder and make sure it consume it.
* [minigraph] add support for changing T1 ports speed from 400G to 100G and vice-versa (#14505)
Open
[minigraph] add support for changing T1 ports speed from 400G to 100G and vice-versa
vdahiya12 wants to merge 9 commits into sonic-net:master from vdahiya12:dev/vdahiya/minigraph_parser
Conversation 10
Commits 9
Checks 18
Files changed 5
Conversation
vdahiya12
@vdahiya12 vdahiya12 commented 2 weeks ago •
On SONiC T1 cisco 8101 HwSku, the speed changes are done from 400G to 100G needs to be supported on 400G ports.
To enable this, along with speed change the port lanes need to be changed. This PR has the changes to update the port lanes when such speed change happens.
Basically if Banwidth in minigraph.xml intends to enable a 100G speed on a 400G port, then the appropriate lane change and speed change needs to be invoked in mingraph parser
Example if port_config.ini dicatates the speed to be 400G and minigraph has 100G speed, then this changeneeds to be accommodated
Ethernet96 1536,1537,1538,1539,1540,1541,1542,1543 etp12 12 400000 0
<DeviceLinkBase>
<ElementType>DeviceInterfaceLink</ElementType>
<EndDevice>ARISTA01T2</EndDevice>
<EndPort>Ethernet1</EndPort>
<StartDevice>Device-8101-01</StartDevice>
<StartPort>etp12</StartPort>
<Bandwidth>100000</Bandwidth>
</DeviceLinkBase>
These platforms today have 400g port with 8 serdes lines, and 100g will operate with 4 serdes lane. When the port speed changes from 400G to 100G the first 4 lanes will be used for 100G port.
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* add all
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* fix unit
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
---------
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Remove 'kvmtest-t0' and 'kvmtest-t1-lag' test jobs since all the test jobs are required (continueOnError: false) already, and will only enable one of classical and testbedV2 tests, no need to do an unnecessary 'or' compute test job.
Change agent pool to reduce cost and avoid congestion
Work item tracking
Microsoft ADO (number only): 21199881
src/sonic-platform-common
* c97af3c - (HEAD -> 202205, origin/202205) Modify sfputil show fwversion to include build version for active/inactive FW version fields (#367) (2 days ago) [mihirpat1]
* 7705a20 - Adding electrical for 800G and 100G (#365) (2 days ago) [mihirpat1]
* d0038fc - SFF-8472: Fix tx_disable_channel to avoid write to read-only bit (#364) (2 days ago) [mihirpat1]
* 518a471 - fix get module hardware minor revision (#361) (2 days ago) [Qingxiao Ren]
src/sonic-platform-daemons
* f913e9c - (HEAD -> 202205, origin/202205) [CMIS] Add power up duration for power up timeout (#345) (2 hours ago) [ChiouRung Haung]
src/sonic-sairedis
* 7f6abdd - (HEAD -> 202205, origin/202205) Revert "Ignore removing switch for mellanox platform due to known limitation (#1216)" (#1231) (8 days ago) [Junchao-Mellanox]
Why I did it
refine reproducible build.
How I did it
Fix reset map variable in bash.
Ignore empty web file md5sum value.
If web file didn't backup in azure storage, use file on web.
How to verify i
Fix watchdog reboot cause for wolverine linecard
Fix PSU fan speed of 0% by adding max RPM to most psu descriptions
Add product DCS-7060DX5-64
Add product DCS-7060DX5-32
What/Why I did:
Allow traffic with source and destination as chassis eth1-midplane ip. Needed for Supervisor Redis-db connection (Redis packet has source and destination ip as eth1-midpane) after we load acl.json that has catch-all drop rule. Changes are generic and not specific to supervisor and applies on LC also.
Made multi_asic_ns_to_host_fwd as False for ACL service for External Client. This flag is needed for service SSH and SNMP where traffic can come in namespace over front-panel ports and we need to send the traffic in host where corresponding docker/service are running. There is no use-case of External client service for multi-asic as of now. Having flag as True creates failure when we try to load acl.json.
Why I did it
Release Notes for Cisco 8101-32FH-O:
· Enable CMIS
· Enable Subport for Static Breakout
How I did it
Update platform version to 202205.2.2.2 (equivalent to 202205-v0.16)
src/sonic-utilities
* ece22b7d - (HEAD -> 202205, origin/202205) Revert "[GCU] Add PFC_WD RDMA validator (#2781)" (4 minutes ago) [Ying Xie]
* 7d16b184 - Remove the no use new line in show version (#2792) (21 hours ago) [xumia]
* 3a880a2b - Support to display the SONiC OS Version in the command show version (#2787) (21 hours ago) [xumia]
* a5199f75 - [voq][chassis][generate_dump] [BCM] Dump only the relevant BCM commands for fabric cards (#2606) (21 hours ago) [saksarav-nokia]
* 2410d364 - Fixed a bug in "show vnet routes all" causing screen overrun. (#2644) (#2801) (
Updated asic_port_names for all Arista LC SKUs to follow latest naming
conventions to remove redundant ASICx suffix. For
Arista-7800R3-48CQ2-C48, added the asic_port_name mapping.
Co-authored-by: kenneth-arista <93353051+kenneth-arista@users.noreply.github.com>
Why I did it
[Build] Support to use the snapshot mirror for debian base image
How I did it
If the MIRROR_SNAPSHOT=n, then use the default mirror http://deb.debian.org/debian
If the MIRROR_SNAPSHOT=y, then use the snapshot mirror, for instance http://packages.trafficmanager.net/snapshot/debian/20230330T000330Z/.
How to verify it
+ scripts/build_debian_base_system.sh amd64 bullseye ./fsroot-vs
I: Target architecture can be executed
I: Retrieving InRelease
I: Checking Release signature
I: Valid Release signature (key id A4285295FC7B1A81600062A9605C66F00D6C9793)
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Checking component main on http://packages.trafficmanager.net/snapshot/debian/20230331T000125Z...
I: Retrieving libacl1 2.2.53-10
Co-authored-by: xumia <59720581+xumia@users.noreply.github.com>
