#### Why I did it
When CPU is busy, the sonic_ax_impl may not have sufficient speed to handle the notification message sent from REDIS.
Thus, the message will keep stacking in the memory space of sonic_ax_impl.
If the condition continues, the memory usage will keep increasing.
#### How I did it
Add a monit file to check if the SNMP container where sonic_ax_impl resides in use more than 4GB memory.
If yes, restart the sonic_ax_impl process.
#### How to verify it
Run a lot of this command: `while true; do ret=$(redis-cli -n 0 set LLDP_ENTRY_TABLE:test1 test1); sleep 0.1; done;`
And check the memory used by sonic_ax_impl keeps increasing.
After a period, make sure the sonic_ax_impl is restarted when the memory usage reaches the 4GB threshold.
And verify the memory usage of sonic_ax_impl drops down from 4GB.
Change references to use bullseye instead of buster
Why I did it
Almost all daemons in 202211 and master uses bullseye, and sflow was easy to migrate.
How I did it
Replaced the references, built and tested in 202211.
How to verify it
Build with the changes, enable sflow:
admin@sonic:~$ sudo config sflow collector add test 1.2.3.4
admin@sonic:~$ sudo config sflow collector enable
tcpdump on 1.2.3.4 and see that UDP sFlow are being sent.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Change references to use bullseye instead of buster
Why I did it
Almost all daemons in 202211 and master uses bullseye, and NAT seems easy to migrate.
How I did it
Replaced the references, built with 202211 branch.
How to verify it
Not sure, it builds and tests pass as far as I can tell but I don't use the feature myself.
Signed-off-by: Christian Svensson <blue@cmd.nu>
catch system error and log as warning level instead of
error level in case interface was already deleted.
Why I did it
sflow process exited when failed to convert the interface index from interface name
How I did it
Added exception handling code and logged when OSError exception.
How to verify it
Recreated the bug scenario #11437 and ensured that sflow process not exited.
Description for the changelog
catch system error and log as warning level instead of
error level in case interface was already deleted.
Logs
steps :
root@sonic:~# sudo config vlan member del 4094 PortChannel0001
root@sonic:~# sudo config vlan member del 4094 Ethernet2
root@sonic:~# sudo config vlan del 4094
root@sonic:~#
"WARNING sflow#port_index_mapper: no interface with this name" is seen but no crash is reported
syslogs :
Jan 23 09:17:24.420448 sonic NOTICE swss#orchagent: :- removeVlanMember: Remove member Ethernet2 from VLAN Vlan4094 lid:ffe vmid:27000000000a53
Jan 23 09:17:24.420710 sonic NOTICE swss#orchagent: :- flushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 3
Jan 23 09:17:24.420847 sonic NOTICE swss#orchagent: :- recordFlushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 3
Jan 23 09:17:24.426082 sonic NOTICE syncd#syncd: :- processFdbFlush: fdb flush succeeded, updating redis database
Jan 23 09:17:24.426242 sonic NOTICE syncd#syncd: :- processFlushEvent: received a flush port fdb event, portVid = oid:0x3a000000000a52, bvId = oid:0x26000000000a51
Jan 23 09:17:24.426374 sonic NOTICE syncd#syncd: :- processFlushEvent: pattern ASIC_STATE:SAI_OBJECT_TYPE_FDB_ENTRY:*oid:0x26000000000a51*, portStr oid:0x3a000000000a52
Jan 23 09:17:24.427104 sonic NOTICE bgp#fpmsyncd: :- onRouteMsg: RouteTable del msg for route with only one nh on eth0/docker0: fe80::/64 :: eth0
Jan 23 09:17:24.427182 sonic NOTICE bgp#fpmsyncd: :- onRouteMsg: RouteTable del msg for route with only one nh on eth0/docker0: fd00::/80 :: docker0
Jan 23 09:17:24.428502 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: processing consolidated fdb flush event of type: SAI_FDB_ENTRY_TYPE_DYNAMIC
Jan 23 09:17:24.429058 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: fdb flush took 0.000606 sec
Jan 23 09:17:24.431496 sonic NOTICE swss#orchagent: :- setHostIntfsStripTag: Set SAI_HOSTIF_VLAN_TAG_STRIP to host interface: Ethernet2
Jan 23 09:17:24.431675 sonic NOTICE swss#orchagent: :- flushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 2
Jan 23 09:17:24.431797 sonic NOTICE swss#orchagent: :- recordFlushFdbEntries: flush key: SAI_OBJECT_TYPE_FDB_FLUSH:oid:0x21000000000000, fields: 2
Jan 23 09:17:24.437009 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: processing consolidated fdb flush event of type: SAI_FDB_ENTRY_TYPE_DYNAMIC
Jan 23 09:17:24.437532 sonic NOTICE swss#orchagent: :- meta_sai_on_fdb_flush_event_consolidated: fdb flush took 0.000514 sec
Jan 23 09:17:24.437942 sonic NOTICE syncd#syncd: :- processFdbFlush: fdb flush succeeded, updating redis database
Jan 23 09:17:24.438065 sonic NOTICE syncd#syncd: :- processFlushEvent: received a flush port fdb event, portVid = oid:0x3a000000000a52, bvId = oid:0x0
Jan 23 09:17:24.438173 sonic NOTICE syncd#syncd: :- processFlushEvent: pattern ASIC_STATE:SAI_OBJECT_TYPE_FDB_ENTRY:*, portStr oid:0x3a000000000a52
Jan 23 09:17:24.440348 sonic NOTICE swss#orchagent: :- removeBridgePort: Remove bridge port Ethernet2 from default 1Q bridgeJan 23 09:17:29.782554 sonic NOTICE swss#orchagent: :- removeVlan: VLAN Vlan4094 still has 1 FDB entries
Jan 23 09:17:29.791373 sonic WARNING sflow#port_index_mapper: no interface with this name
Signed-off-by: Gokulnath-Raja <Gokulnath_R@dell.com>
Why I did it
Add AZP agent necessary packages to sonic-mgmt-docker
Remove Python 201811 venv
Update some packages in order to meet internal security requirements
How I did it
Update sonic-mgmt-docker file
How to verify it
sonic-mgmt-docker can run: bash, apt update, apt install and ping.
start.sh is under /azp with exec permission.
env-201811 venv is removed.
jinja2 is upgrade to 2.10.1
#### Why I did it
Bug in script that was passing in null as log level value if missing from config_db
#### How I did it
Added more robust conditional statement
#### How to verify it
1) Remove log_level from config db
2) config reload -y
3) telemetry should not crash
- Why I did it
Fixes#14236
When a redis event quickly gets outdated during port breakout, error logs like this are seen
Mar 8 01:43:26.011724 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': {'admin_status': 'down'}, 'Ethernet68': {'admin_status': 'down'}}}
Mar 8 01:43:26.012565 r-leopard-56 INFO ConfigMgmt: Writing in Config DB
Mar 8 01:43:26.013468 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': None, 'Ethernet68': None}, 'INTERFACE': None}
Mar 8 01:43:26.018095 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Configure Ethernet64 admin status to down
Mar 8 01:43:26.018309 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Delete Port: Ethernet64
Mar 8 01:43:26.018641 r-leopard-56 NOTICE lldp#lldpmgrd[32]: :- pops: Miss table key PORT_TABLE:Ethernet64, possibly outdated
Mar 8 01:43:26.018654 r-leopard-56 ERR lldp#lldpmgrd[32]: unknown operation ''
- How I did it
Only log the error when the op is not empty and not one of ("SET" & "DEL" )
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Currently the show and clear cli of dhcp_relayis may cause confusion.
How I did it
Add doc for it: [doc] Add docs for dhcp_relay show/clear cli sonic-utilities#2649
Add dhcp_relay config cli and test cases.
show dhcp_relay ipv4 helper
show dhcp_relay ipv6 destination
show dhcp_relay ipv6 counters
sonic-clear dhcp_relay ipv6 counters
How to verify it
Unit test all passed
It will allow us to have application called "mergecap" - which can merge multiple .pcap files into single .pcapng file and convert it to .pcap file
Signed-off-by: Petro Pikh <petrop@nvidia.com>
#### Why I did it
Remove dialout as critical process as it is no longer used in prod. As part of future work, can remove dialout completely
#### How I did it
Remove from critical process list
Why I did it
DHCPv6 relay config entry is not useful while del dhcpv6 relay config.
How I did it
Remove dhcpv6_relay entry if it is empty and not check entry exist while adding dhcpv6 relay
Why I did it
dplane_fpm_nl is a new FPM implementation in FRR. The old plugin fpm will not have any new features implemented. Usage of the new plugin gives us ability to use BGP suppression feature and next hop groups in the future.
How I did it
Switch to dplane_fpm_nl zebra plugin from old fpm plugin which is not supported anymore
Remove stale patches for old fpm plugin and add similar patches for dplane_fpm_nl
How to verify it
Build and run on the switch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Currently the config cli of dhcpv4 is may cause confusion and config of dhcpv6 is missing.
How I did it
Add dhcp_relay config cli and test cases.
config dhcp_relay ipv4 helper (add | del) <vlan_id> <helper_ip_list>
config dhcp_relay ipv6 destination (add | del) <vlan_id> <destination_ip_list>
Updated docs for it in sonic-utilities: https://github.com/sonic-net/sonic-utilities/pull/2598/files
How to verify it
Build docker-dhcp-relay.gz with and without INCLUDE_DHCP_RELAY, and check target/docker-dhcp-relay.gz.log
#### Why I did it
Improve naming convention for bgp notification events and change type of leaf for sonic-events-host mem usage from uint64 to decimal64
#### How I did it
Replace "-" with "_"
Replace uint64 with decimal64
#### How to verify it
Run yang model unit tests
#### Description for the changelog
Change YANG model leaf naming convention for bgp notification
*Critical process for database-chassis is redis-chassis but critical_process contains hard-coded
to `redis` program always. Instead using jinja2 template to render critical process list based on database docker type. redis-chassis for database-chassis docker and redis for regular database docker.
if there is no request, you need to use curl to get data from bmc, and each query needs to start a curl process. pmon is a circular query, which will pull up multiple processes in a loop, which consumes a lot. Using request does not need to pull up the process.
Avoid traceback on sonic-clear command
sonic-clear dhcp6relay_counters
Traceback (most recent call last):
File "/usr/local/bin/sonic-clear", line 8, in <module>
sys.exit(cli())
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 764, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 717, in main
rv = self.invoke(ctx)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 1137, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 956, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "/usr/local/lib/python3.9/dist-packages/click/core.py", line 555, in invoke
return callback(*args, **kwargs)
File "/usr/local/lib/python3.9/dist-packages/clear/plugins/dhcp-relay.py", line 19, in dhcp6relay_clear_counters
counter = DHCPv6_Counter()
NameError: name 'DHCPv6_Counter' is not defined
- How I did it
Corrected the way to import using importlib
- How to verify it
Tested the sonic-clear command and verified no traceback is seen
- Why I did it
Support syslog rate limit configuration feature
- How I did it
Remove unused rsyslog.conf from containers
Modify docker startup script to generate rsyslog.conf from template files
Add metadata/init data for syslog rate limit configuration
- How to verify it
Manual test
New sonic-mgmt regression cases
Why I did it
To ensure, that after a BGP startup, dualtor T0 receives BGP updates before sending out BGP updates.
Please refer to sonic-net/SONiC#1161 for more details.
How I did it
add coalesce-time 10000 to the frr bgp startup config.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Why I did it
Platform interface doesn't provide all sensors and using it isn't effective
How I did it
Request sensors via http from BMC server and parse the result
How to verify it
Related daemon in pmon populates redis db, run this command to view the contents
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Fixes#12575 and #12575
How I did it
In the PR sonic-net/sonic-platform-daemons#311 chassisd updates to CHASSIS_FABRIC_ASIC_INFO with the fabric asic info.
Updating the asic_status.py to read from the correct table.
How to verify it
test on chassis
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
Upgrade the app-extension developer environments (sonic-sdk & sonic-sdk-bullseye) to bullseye
- How to verify it
Built an app-extension using these images and verified if it is up and running.
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
Why I did it
There were some changes in apt source code in version 2.1.9.
As a result apt used in bullseye (2.2.4) is intolerant to network issues.
This was fixed in 10631550f1 Already fixed version is used in bookworm (2.5.4)
And not yet affected version is used in buster (1.8.2.3)
How I did it
Set Acquire::Retries to 3 for sonic-slave-bullseye, docker-base-bullseye and final Debian image.
Ref: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1876035
Signed-off-by: Konstantin Vasin k.vasin@yadro.com
* [SAI PTF] SAI PTF docker support sai-ptf v2
Publish the sai-ptf docker.
Take part of the change from previous PR #11610 (already reverted as some cache issue)
Cause in #11610, added two new target in it, one is sai-ptf another one is syncd-rpc with sai-ptf v2, to make the upgrade with more clear target, use this one take the sai-ptf one.
Test one:
NOSTRETCH=y NOJESSIE=y make configure PLATFORM=vs
NOSTRETCH=y NOJESSIE=y NOBULLSEYE=y SAITHRIFT_V2=y make target/docker-ptf-sai.gz
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* remove useless change
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* remove useless parameters
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* remove useless change
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* Update azure-pipelines-build.yml
remove a useless option
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
- Why I did it
The values for config_db "docker_routing_config_mode" are:
separated: FRR config generated from ConfigDB, each FRR daemon has its own config file
unified: FRR config generated from ConfigDB, single FRR config file
split: FRR config not generated from ConfigDB, each FRR daemon has its own config file
This commit adds:
split-unified: FRR config not generated from ConfigDB, single FRR config file
- How I did it
In docker_init.sh, when split-unified is used, the FRR configs are not generated
from ConfigDB. What's more, "service integrated-vtysh-config" is configured in vtysh.conf.
- How to verify it
FRR config not overwritten when FRR container starts.
Signed-off-by: Arnaud le Taillanter <a.letaillanter@criteo.com>
bgpd.main.conf.j2: bugfix-9739
* Update bgpd.main.conf.j2 to gracefully handle the bgp configuration cases for when 'bgp_asn' is set to 'None', 'Null', or missing.
How I did it
Include a conditional statement to avoid configuring bgp in FRR when 'bgp_asn' is missing or set to 'None' or 'Null'
How to verify it
Configure 'bgp_asn' as 'None', 'Null' or have it missing from configurations and verify that /etc/frr/bgpd.conf does not have invalid bgp configurations like 'router bgp None'
Description for the changelog
Update bgpd.main.conf.j2 to gracefully handle the bgp configuration cases for when 'bgp_asn' is set to 'None', 'Null', or missing for bugfix 9739.
Signed-off-by: cchoate54@gmail.com
Why I did it
Unify the Debian mirror sources
Make easy to upgrade to the next Debian release, not source url code change required.
Support to customize the Debian mirror sources during the build
Relative issue: #12523
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`subprocess` is used with `shell=True`, which is very dangerous for shell injection.
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
#### How I did it
remove `shell=True`, use `shell=False`
Replace `os` by `subprocess`
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
closes#12343
Today in SONiC the notify-keyspace-events is from DbInterface class when application try do any configdb set.
In Chassis the chassis_db may not get any configdb set operations, so there is chance this configuration will never be set.
So the chassis_db updates from one line card will not be propogated to other linecards, which are doing a psubscribe to get these event.
How I did it
update the redis.conf to set notify-keyspace-events AKE so that the notify-keyspace-events are set when the redis instance is started
How to verify it
Test on chassis
Why I did it
Add the missing debian source bullseye-updates/buster-updates
The build failure as below, it is caused by the docker image debian:bullseye used the version 2.31-13+deb11u5, but the version only available in bullseye-update.
- Skip the interface status check if the interface does not exist. In the future, when the interface is created/comes up this check will be triggered again.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Why I did it
The Dockerfile of docker-sonic-mgmt became a little bit messy over time. Some packages are also a little bit too old. It would be better to do some cleanup and upgrade some important packages.
How I did it
Updated the dockerfile template for building docker-sonic-mgmt.
How to verify it
Locally built the docker-sonic-mgmt image and used it to run some test scripts.
Description for the changelog:
The build-essential package contains gcc and make. It's unnecessary to install them again.
The python-is-python2 package is included in the python package for Ubuntu 20.04. It's unnecessary to install it again.
Sort the apt and pip packages by alphabetic order.
Cleanup get-pip.py after installation.
Cleanup the python-scapy deb package after installation.
Ensure that the python pip, setuptools and wheel packages are up to date.
Install pytest-ansible from pip instead of from source code.
While installing docker-ce-cli, it's unnecessary to install curl and software-properties-common again.
Merged some pip install steps into one step.
Upgrade ansible from 2.8.12 to 2.9.27 for env-python3.
Upgrade pytest to 7.1.3 for env-python3.
Add ncclient package to evn-python3.
* Add smartmontools to pmon docker
* Set smartmontools to install version 7.2-1 in pmon to match host; clean up smartmontools build files
* Add comments on smartmontools version for both host and pmon
- Why I did it
Fixes#11431
- How I did it
dhcp6relay binds to ipv6 addresses configured on these vlan interfaces
Thus check if they are ready before launching dhcp6relay
- How to verify it
Unit Tests
Tested on a live device
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
The python packages azure-kusto-data and azure-kusto-ingest packages for python2 are too old and not really used. The python3 environment has newer version of these packages installed. This change is to deprecate these two packages for python2 in docker-sonic-mgmt image.
How I did it
Removed the lines for installing old version of packages azure-kusto-data and azure-kusto-ingest in python2 in the Dockerfile template.
Signed-off-by: Xin Wang <xiwang5@microsoft.com>
Why I did it
test_sai_qos failed because of the following error:
"stderr_lines": [
"Traceback (most recent call last):",
" File \"/usr/bin/ptf\", line 522, in <module>",
" test_modules = load_test_modules(config)",
" File \"/usr/bin/ptf\", line 413, in load_test_modules",
" mod = imp.load_module(modname, *imp.find_module(modname, [root]))",
" File \"saitests/switch.py\", line 19, in <module>",
" import switch_sai_thrift",
"ImportError: No module named switch_sai_thrift"
],
It's because test_sai_qos runs ptf script which imports switch_sai_thrift, switch_sai_thrift is installed from python-saithrift_0.9.4_amd64.deb.
For master image, the deb file is for python3, but ptf only has virtual python3 environment, that's why we add --system-site-packages to allow virtual env to access system site-packeges.
Add thrift package in docker ptf virtual python3 env, because currently env-python3 doesn't have thrift module which is needed in switch_sai_thrift.
How I did it
Enable --system-site-packages for virtual py3 env in ptf docker and install thrift for test_qos_sai
How to verify it
load and login ptf conatiner
dpkg - i python-saithrift_0.9.4_amd64.deb
source /root/env-python3/bin/activate
python
import switch_sai_thrift.switch_sai_rpc
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
With this PR in, you flap BGP and use events_tool to see the published events.
With telemetry PR #111 in and corresponding submodule update done in buildimage, one could run gnmi_cli to capture BGP flap events.
Why I did it
In latest syncd container, it is installed bullseye, can't find command '/usr/bin/python'.
Some scripts such as test_copp still calls /usr/bin/python in syncd.
Submitted the change in #11807 for syncd docker, but it's better to add it in bullseye base docker.
How I did it
Install python-is-python3 package in bullseye base docker to resolve this issue, whatever run python or python3, it will run /usr/bin/python3, will not cause the error of can't find command '/usr/bin/python'
How to verify it
run python in syncd container.
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
Why I did it
Migrate FRR to bullseye
How I did it
Makefile and docker config changes to refer to bullseye instead of buster.
How to verify it
Build bullseye frr docker.
Co-authored-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
At SWSS docker init time, check the device subtype and enable tunnel packet handler only if it is dualtor
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
#### Why I did it
The default stable version of rsyslog on bullseye has a bug about rate limit. It causes rate limit not work. The bug has been fixed on backport version 8.2206.0-1~bpo11+1.
Buster has no such issue.
#### How I did it
Upgrade rsyslog from 8.2110.0 to 8.2206.0-1~bpo11+1
#### How to verify it
Manual test
*The initial commit for the P4RT docker hard coded all the flags which makes it difficult to configure at runtime. Reading them from the CONFIG_DB allows for more flexibility.
ping command is not working inside PMON docker (bullseye)
Use case: chassisd checks for module reachability inside PMON for "show chassis modules midplane-status" CLI, and on Cisco chassis, this uses ping command to check network reachability
#### Why I did it
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
#### How I did it
Change flush_unused_database code to use swsscommon API:
Change get_instancelist to getInstanceList.
Change get_dblist to getDbList.
#### How to verify it
Pass all E2E test.
Manually check syslog make sure error log not exist and swss, syncd, bgp service started.
Search code in Azure make sure there all similer case are fixed in this PR.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
What I did:
Following changes done for packet based chassis:-
1> Run arp_update on LC's to resolve static route nexthops over backend
port-channel interfaces.
2> On Supervisor make sure arp_update exit gracefully
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
Signed-off-by: Yong Zhao yozhao@microsoft.com
Why I did it
This PR aims to check in the commit f2b11e4 introduced by the update related to gNMI python client.
How I did it
I changed the Dockfile.j2 such that the update of gNMI client script will be checked in when ptf docker image is built.
How to verify it
A PTF container image was built and then loaded on a testbed. I checked the update of gNMI client script was checked in.
#### Why I did it
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### How I did it
Change code to use swsscommon.
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
Keysight provide a new version with some snappi API source code related fix: snappi[ixnetwork,convergence]==0.7.44
How I did it
Upgrade snappi version to 0.7.44
How to verify it
Whether it's installed in sonic-mgmt docker container
- Why I did it
To provide an ability to suppress ASAN false positives and have a clean ASAN report for docker-sonic-vs/mlnx-syncd/orchagent docker
- How I did it
Added the "print_suppressions=0" to ASAN configs.
- How to verify it
add a suppression to some ASAN-enabled component (the suppression should catch some leak)
build with ENABLE_ASAN=y
run a test and see that the ASAN report is empty instead of having the suppression summary
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
* [BGP]Adding configuration knob to allow advertise Loopback ipv6 /128 prefix
By default when IPv6 address is configured with /128 as subnet mask in Loopback0 interface, it will be advertised as prefix with /64 subnet.
To control this behavior a new field 'bgp_adv_lo_prefix_as_128' is introduced in DEVICE_METADATA table which when set to true will advertise prefix with /128 subnet as it is.
What/Why I did:
Issue1: By setting up of ipvlan interface in interface-config.sh we are not tolerant to failures. Reason being interface-config.service is one-shot and do not have restart capability.
Scenario: For example if let's say database service goes in fail state then interface-services also gets failed because of dependency check but later database service gets restart but interface service will remain in stuck state and the ipvlan interface nevers get created.
Solution: Moved all the logic in database service from interface-config service which looks more align logically also since the namespace is created here and all the network setting (sysctl) are happening here.With this if database starts we recreate the interface.
Issue 2: Use of IPVLAN vs MACVLAN
Currently we are using ipvlan mode. However above failure scenario is not handle correctly by ipvlan mode. Once the ipvlan interface is created and ip address assign to it and if we restart interface-config or database (new PR) service Linux Kernel gives error "Error: Address already assigned to an ipvlan device." based on this:https://github.com/torvalds/linux/blob/master/drivers/net/ipvlan/ipvlan_main.c#L978Reason being if we do not do cleanup of ip address assignment (need to be unique for IPVLAN) it remains in Kernel Database and never goes to free pool even though namespace is deleted.
Solution: Considering this hard dependency of unique ip macvlan mode is better for us and since everything is managed by Linux Kernel and no dependency for on user configured IP address.
Issue3: Namespace database Service do not check reachability to Supervisor Redis Chassis Server.
Currently there is no explicit check as we never do Redis PING from namespace to Supervisor Redis Chassis Server. With this check it's possible we will start database and all other docker even though there is no connectivity and will hit the error/failure late in cycle
Solution: Added explicit PING from namespace that will check this reachability.
Issue 4:flushdb give exception when trying to accces Chassis Server DB over Unix Sokcet.
Solution: Handle gracefully via try..except and log the message.
Why I did it
There is a bug that the Port attributes in CONFIG_DB will be cleared if using sudo config macsec port add Ethernet0 or sudo config macsec port del Ethernet0
How I did it
To fetch the port attributes before set/remove MACsec field in port table.
Signed-off-by: Ze Gan <ganze718@gmail.com>
Fixes#9279
- Why I did it
Part of larger effort to move all SONiC systems to bullseye
- How I did it
1. Update container makefiles with correct dependencies
2. Update container Dockerfile with correct base image
3. Update container Dockerfile with correct apt dependencies
4. Update any other makefiles with dependencies to remove python2 support
5. Minor changes to support bullseye / python3
- How to verify it
Run regression on the switch:
1. Verify PTF community tests work
2. Verify syncd runs and all ports come up / pass traffic
3. Verify all platform tests succeed
