- monit config broke by one monit upgrade
- abandon sed approach since it is suspestible to monit config changes
- use unixsocket instead of httpd due to a bug in 5.20.0
[build_debian] Generate checksum of ASIC config files
* Adds script to generate checksums for ASIC config files
* Adds step to build_debian that copies ASIC config checksum into SONiC filesystem
Signed-off-by: Danny Allen daall@microsoft.com
Docker version above 18 has inconsistent behaviour with qemu.
Hence using the same version 18 used in sonic-slave
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
ndisc6 gathers a few diagnostic tools for IPv6 networks including:
- ndisc6, which performs ICMPv6 Neighbor Discovery in userland,
- rdisc6, which performs ICMPv6 Router Discovery in userland,
- rltraceroute6, a UDP/ICMP IPv6 implementation of traceroute,
- tcptraceroute6, a TCP/IPv6-based traceroute implementation,
- tcpspray6, a TCP/IP Discard/Echo bandwidth meter,
- addrinfo, easy script interface for hostname and address resolution,
- dnssort, DNS sorting script.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [Makefile/slave docker] ARM arch doesn't support few packages
iproute2 is missing for ARM sonic-slave docker
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
ARM Architecture support in SONIC
make configure platform=[ASIC_VENDOR_ARCH] PLATFORM_ARCH=[ARM_ARCH]
SONIC_ARCH: default amd64
armhf - arm32bit
arm64 - arm64bit
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
This commit adds support for New feature management VRF using L3mdev. Added
commands to enable/disable management VRF. Config vrf add mgmt will enable
management VRF, enslave the eth0 device to the master device mgmt and restart
interfaces-configs in mgmt-vrf context.
management interface (eth0) can be configured using config interface eth0 ip
add command and removed using config interface eth0 ip remove command.
Requirement and design are covered in mgmt vrf design document. Currently show
command displays linux command output; will update show command display in next
PR after concluding what would be the output for the show commands. Added
metric for default routes in dhcp and static, any changes for metric will be
addressed subsequently after discussing.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
* Upgrade ifupdown2 to version 1.2.8
Required by ZTP to support ZTP over IPv6 transport
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
- What I did
Configure sshd to close all SSH connetions after 15 minutes of inactivity.
- How I did it
Set ClientAliveInterval to 900 (900 seconds = 15 minutes) and ClientAliveCountMax to 0
in /etc/ssh/sshd_config using augtool in build_debian.sh. In the process, I refactored the existing augtool command for sshd_config so as to add comments and empty lines to file for readability.
- How to verify it
Log into device via management port. Wait 15 minutes without sending a keystroke -- you should be automatically logged out.
* Added debug symbols to many debug dockers.
* For debug images *only*:
1) Archive source files into debug image
2) Archived source is copied into /src
3) Created an empty dir /debug
4) Mount both /src as ro & /debug as rw into every docker
5) Login banner will give some details on /src & /debug
6) Devs can copy core file into /debug and view it from inside a container.
7) Dev may create all gdb logs and other data directly into /debug.
* Dropped redundant REDIS_TOOLS per review comments.
* Added debug symbols to frr package and hence FRR based BGP docker.
* 1) Moved dbg_files.sh to scripts/
2) Src directories to archive are now collected from individual Makefiles.
3) Added few more debug symbols
4) Added few more debug dockers.
Here after no more changes except per review comments.
To debug:
Install required version of debug image in Switch or VM.
Copy core file into /debug of host
Get into Docker
gdb /usr/bin/<daemon> -c /debug/<your core file>
set directory /src/... <-- inside gdb to get the source
For non-in-depth debugging:
Download corresponding debug Docker image (docker-...-dbg.gz) to your VM
Load the image
Run image with entrypoint as 'bash' with dir containing core mapped in.
Run gdb on the core.
* [submodule] update sonic-linux-kernel
* update linux kernel version
* Fix many version strings
* update mellanox components (built with new kernel)
* [mlnx] add make files for SDK WJH libs
* Update arista driver submodule (#8)
Make the debian packaging point to a newer kernel version.
- What I did
Currently when the system is under memory pressure, the OOM killer kicks in and kills a rogue process. Killing a rogue process can cause the device to be un-healthy leading to blackholing of the traffic.
To avoid this, configure the OOM to do a kernel panic which will cause the device to reboot and come back up healthy.
- How I did it
Added the sysctl variable panic_on_oom and set the value to 2.
Setting it to 2 will ensure OOM killer to always do a kernel panic.
- Add ebtables package, and install some filter rules:
1. ebtables -A FORWARD -d BGA -j DROP
2. ebtables -A FORWARD -p ARP -j DROP
Basically, we let the ARP packets in the VLAN being forwarded by the ASIC,
kernel gets a copy of these ARP packets and the forwarding from Kenerl gets
dropped. So there is always only one copy of ARP/response in the VLAN.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
We are going to use initramfs hook for firmware upgrades
To install Arista hook:
- create folder /mnt/flash/<image dir>/platform/hooks/boot1/ from Aboot or
/host/<image dir>/platform/hooks/boot1/ from Sonic
- add executable script to created folder
* [build]: put stretch debian packages under target/debs/stretch/
* in stretch build phase, all debian packages built in that stage are placed under target/debs/stretch directory.
* for python-based debian packages, since they are really the same for jessie and stretch, they are placed under target/python-debs directory.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
When rebooting without the platform_reboot plugin, systemd takes a few
minutes to properly shutdown. It's blocking on some docker cleanup
operation.
As described by https://github.com/docker/for-linux/issues/421 there
is a race between docker.service and containerd.service.
docker needs containerd to properly stop the containers.
* [security kernel] Upgrade kernel from 4.9.110-3+deb9u2 to 4.9.110-3+deb9u6
short version: 4.9.0-7 to 4.9.0-8
See changelogs for security fixes:
https://tracker.debian.org/media/packages/l/linux/changelog-4.9.110-3deb9u6
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update sonic-linux-kernel submodule after it was merged
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* [baseimage] set default locale en_US.UTF-8
Signed-off-by: chenhu <chenhu@didichuxing.com>
* [baseimage]set default locale to en_US.UTF-8, clean all other unused
* [baseimage] update-locale after locale-gen
* correct update-locale command line
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [baseimage]: install picocom 3.1 in base image
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* add picocom to stretch build
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* fix slave.mk bug
Signed-off-by: Guohan Lu <gulv@microsoft.com>
stretch docker-engine in base image is not started by default
in the build process. Need to create empty /var/lib/docker
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* Fix potential blackholing/looping traffic and refresh ipv6 neighbor to avoid CPU hit
In case ipv6 global addresses were configured on L3 interfaces and used for peering,
and routing protocol was using link-local addresses on the same interfaces as prefered nexthops,
the link-local addresses could be aged out after a while due to no activities towards the link-local
addresses themselves. And when we receive new routes with the link-local nexthops, SONiC won't insert
them to the HW, and thus cause looping or blackholing traffic.
Global ipv6 addresses on L3 interfaces between switches are refreshed by BGP keeplive and other messages.
On server facing side, traffic may hit fowarding plane only, and no refresh for the ipv6 neighbor entries regularly.
This could age-out the linux kernel ipv6 neighbor entries, and HW neighbor table entries could be removed,
and thus traffic going to those neighbors would hit CPU, and cause traffic drop and temperary CPU high load.
Also, if link-local addresses were not learned, we may not get them at all later.
It is intended to fix all above issues.
Changes:
Add ndisc6 package in swss docker and use it for ipv6 ndp ping to update the neighbors' state on Vlan interfaces
Change the default ipv6 neighbor reachable timer to 30mins
Add periodical ipv6 multicast ping to ff02::11 to get/refresh link-local neighbor info.
* Fix review comments:
Add PORTCHANNEL_INTERFACE interface for ipv6 multicast ping
format issue
* Combine regular L3 interface and portchannel interface for looping
* Add ndisc6 package to vs docker
some platform drivers install blacklist.conf in /etc/modprobe.d.
Those configuration should be proprogated into initramfs to avoid
loading those blacklisted driver.
* [slave.mk]: Fix displaying username and password in build summary
We display contents of DEFAULT_USERNAME and DEFAULT_PASSWORD, while
image can be build with USERNAME and/or PASSWORD given on make(1)
command line. For example:
$ make USERNAME=adm PASSWORD=mypass target/sonic-broadcom.bin
Fix by displaying USERNAME and PASSWORD variables in build summary.
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co>
* [baseimage]: Improve default user account handling
There are couple of issues with current implementation of default
user account management in baseimage:
1) It uses DES to encrypt accounts password. Furthermore this
effectively limits password length to 8 symbols, even if more
provided with PASSWORD or DEFAULT_PASSWORD from rules/config.
2) Salt value for password is same on all builds even with different
password increasing attack surface.
3) During the build process password passed as command line parameter
either as plain text (if given to make(1) as "make PASSWORD=...")
or DES encrypted (if given to build_debian.sh) can be seen by
non-build users using /proc/<pid>/cmdline file that has group and
world readable permissions.
Both 1) and 2) come from:
perl -e 'print crypt("$(PASSWORD)", "salt"),"\n"')"
that by defalt uses DES if salt does not have format $<id>$<salt>$,
where <id> is hashing function id. See crypt(3) for more details on
valid <id> values.
To address issues above we propose following changes:
1) Do not create password by hands (e.g. using perl snippet above):
put this job to chpasswd(8) which is aware about system wide
password hashing policy specified in /etc/login.defs with
ENCRYPT_METHOD (by default it is SHA512 for Debian 8).
2) Now chpasswd(8) will take care about proper salt value.
3) This has two steps:
3.1) For compatibility reasons accept USERNAME and PASSWORD as
make(1) parameters, but warn user that this is unsafe.
3.2) Use process environment to pass USERNAME and PASSWORD variables
from Makefile to build_debian.sh as more secure alternative to
passing via command line parameters: /proc/<pid>/environ
readable only by user running process or privileged users like
root.
Before change:
--------------
hash1
-----
# u='admin'
# p="$(LANG=C perl -e 'print crypt("YourPaSs", "salt"),"\n"')"
^^^^^^^^
8 symbols
# echo "$u:$p" | chpasswd -e
# getent shadow admin
admin:sazQDkwgZPfSk:17680:0:99999:7:::
^^^^^^^^^^^^^
Note the hash (DES encrypted password)
hash2
-----
# u='admin'
# p="$(LANG=C perl -e 'print crypt("YourPaSsWoRd", "salt"),"\n"')"
^^^^^^^^^^^^
12 symbols
# echo "$u:$p" | chpasswd -e
# getent shadow admin
admin:sazQDkwgZPfSk:17680:0:99999:7:::
^^^^^^^^^^^^^
Hash is the same as for "YourPaSs"
After change:
-------------
hash1
-----
# echo "admin:YourPaSs" | chpasswd
# getent shadow admin
admin:$6$1Nho1jHC$T8YwK58FYToXMFuetQta7/XouAAN2q1IzWC3bdIg86woAs6WuTg\
^^^^^^^^
Note salt here
ksLO3oyQInax/wNVq.N4de6dyWZDsCAvsZ1:17681:0:99999:7:::
hash2
-----
# echo "admin:YourPaSs" | chpasswd
# getent shadow admin
admin:$6$yKU5g7BO$kdT02Z1wHXhr1VCniKkZbLaMPZXK0WSSVGhSLGrNhsrsVxCJ.D9\
^^^^^^^^
Here salt completely different from case above
plFpd8ksGNpw/Vb92hvgYyCL2i5cfI8QEY/:17681:0:99999:7:::
Since salt is different hashes for same password different too.
hash1
-----
# LANG=C perl -e 'print crypt("YourPaSs", "\$6\$salt\$"),"\n"'
^^^^^
We want SHA512 hash
$6$salt$qkwPvXqUeGpexO1vatnIQFAreOTXs6rnDX.OI.Sz2rcy51JrO8dFc9aGv82bB\
yd2ELrIMJ.FQLNjgSD0nNha7/
hash2
-----
# LANG=C perl -e 'print crypt("YourPaSsWoRd", "\$6\$salt\$"),"\n"'
$6$salt$1JVndGzyy/dj7PaXo6hNcttlQoZe23ob8GWYWxVGEiGOlh6sofbaIvwl6Ho7N\
kYDI8zwRumRwga/A29nHm4mZ1
Now with same "salt" and $<id>$, and same 8 symbol prefix in password, but
different password length we have different hashes.
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co>
* Support OS9 -> SONiC fast-reboot migration
* Address review comments. Update NOS mac in EEPROM and net.rules for eth0
* Address review comments. Update sonic-platform-modules-dell to fac81d...
* Fix script for POSIX compliance
* Reduce SONiC migration partition from 8G to 1G.
* Changes to create 1G partition with ability to resize post migration.
* Remove redundant changes in varlog
* Use findfs to interpret root. Move resize in case cmdline params are reordered
* Upgrade linux-image version
* Add missing dependency of igb
* Fix mft build rule
* Add missing dependency of ixgbe
* [Broadcom]: Update OpenNSL modules to be compatible with kernel 3.16.0-5 (#3)
* [Nephos] Update SDK version to support new kernel module 3.16.0-5 (#4)
* [mellanox]: Update URL for SDK (#5)
* Add switch ASIC vendor and platforms for Nephos
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* Advance sonic-sairedis submodule to include #271 (Add Nephos ASIC)
* Framework to plugin Organization specific scripts
* Framework to plugin Organization specific scripts
* Framework to plugin Organization specific scripts
* add getopt option to organization script
moving to initramfs unifies disk allocate on different platforms.
use fallocate instead of dd to speed up the disk allocation.
By default, mkfs.ext4 has -E discard option which discards the blocks
at the mkfs time, also speed up the initialization time.
* [core dump] pass unix time to coredump-compress script
Currently we only have program name (e.g. bgpd) and PID in the core file
name. PID could collide especially after docker restart or recreate.
Passing the unix time to coredump-compress so it could also add time to
the core file name.
* [utilities] include the change to coredump_compress script
* [quagga] enable core dump for bgpd and zebra
bgpd and zebra downgrade their privilege shortly after started. For that
sysctrl kernel.suid_dumpable needs to be set to 2, so that they can dump
core.
Note that fs.suid_dumpable SHOULD NOT be set to 1. Which will bypass all
system security.
* Add monit for disk>85% into pmon docker
* Revert "Add monit for disk>85% into pmon docker"
This reverts commit 9cbbf591c08bce4b52a0f68cbbddae102d7fc614.
* Install monit in base image
* [build]: Include SONiC version into installer.
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Append dirty if contains local changes
Signed-off-by: marian-pritsak <marianp@mellanox.com>
* Update config
* Use correct name for kernel version field
* Update sysDescription.j2
- Create /var/run/redis/ folder on the host
- Install Python client for Redis on the host
- Mount /var/run/redis/ as read/write from host for all dockers
- Enable accessing the database everywhere including on the host and from remote
Signed-off-by: Shuotian Cheng <shuche@microsoft.com>
