src/linkmgrd
* d7ab364 - (HEAD -> 202205, origin/202205) [warmboot] config all interfaces back to `auto` if reconciliation times out (#220) (29 minutes ago) [Jing Zhang]
src/sonic-platform-common
* ade83aa - (HEAD -> 202205, origin/202205) [202205] Fix issue: should use 'Value' column to calculate the health percentage for Virtium SSD (#385) (4 weeks ago) [Junchao-Mellanox]
previously, get_num_asics() returns the maximum number of asics. however, the asic_count
should be actual number of asics populated which can be get from get_asic_presence_list().
ADO: 25158825
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* [buffers] Add create_only_config_db_buffers.json for MLNX devices (not MSFT SKU), inject it at the start of the swss docker
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
* [buffers] Align the sonic-device_metadata.yang
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
---------
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Microsoft ADO (25266920)
sonic-mgmt xoff test was failing for [100g,120km]. Needed to update total headroom pool size when 100G line card is used as T2 uplink.
This size was calculated assuming 100g is used for downlink so cable length was 2km whereas it can also be used for uplink (cable length - 120km). so we need to do calculation based on 120km not 2km. Although it will be some wastage for 2km scenario but it should cover both cases.
What I did:
Fixes: #16468
Why I did:
On Some chassis there is no dedicated eth1-midplane interface on supervisor for supervisor and LC communication but instead Linux bridge br1 is used for that. Because of this changes that were done to white-list traffic over eth1-midplane would not work.
How I did:
To fix this we are using altname property of ip link command to set eth1-midplane as altname of br interface. This is done to keep design generic across chassis and between supervisor and LC also. IP-table rules are updated to get parent/base interface name of eth1-midplane.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Why I did it
Zebra core sometimes seen during config reload. Series of route-map deletions and then re-adds, and this triggers the hash table to realloc to grow to a larger size, then subsuquent route-map operations will be against a corrupted hash table.
Issue is seen when we have BFD Enable on Static Route table we see Static route-map being created/deleted based on bfd session state. However issue itself is very generic from FRR perspective.
Thie issue has detailed core info sonic-net/sonic-frr#37 . This PR fixes this issue.
Fixes#sonic-net/sonic-frr#37
Work item tracking
Microsoft ADO (17952227):
How I did it
This fix is already in Master frr/8.2.5. Porting this fix to 202205 branch to address this Zebra core.
sonic-net/sonic-frr@5f503e5
Solution:
The whole purpose of the delay of deletion and the storage of the route-map is to allow the using protocol the ability to process the route-map at a later time while still retaining the route-map name( for more efficient reprocessing ). The problem exists because we are keeping multiple copies of deletion events that are indistinguishable from each other causing hash havoc.
How to verify it
Verified running sonic-mgmt test, doing multiple config reloads.
* [minigraph] remove number of lanes check for changing speed from 400G to 100G and set speed setting before lane reconfiguration (#15721)
8111 800G interface, split to 2x400G (each has 4 lanes) fails to change interface speed from 400G to 100G during deploy mg. In minigraph.xml, the interface speed configuration is good, but fails to generate the right value to config_db.json.
In order to support this SKU the speed transitioning should support both 4 lanes and 8 lanes in the port_config.ini.
Why I did it
before this change for a 400G to 100G transition, in all cases except when lanes are 8, we would continue and the line
ports.setdefault(port_name, {})['speed'] = port_speed_png[port_name]
would not be executed, hence the default speed will never be set for a case and config_db will not be updated,
where speed is transitioning from 400G to 100G or 40G, but lanes are not equal to 8.
In order for those cases to pass where lanes are not specifically 8, we need the change
Work item tracking
24242657
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* fix UT
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
---------
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Bmc is a valid neighbor type in minigraph, however it was missing from the YANG model definition. Usually, the Bmc type device can be neighbor of BmcMgmtToRRouter. This PR is to introduce this type.
Co-authored-by: Yaqiang Zhu <zyq1512099831@gmail.com>
How I did it
Update Yang definition of ACL_TABLE_TYPE.
Update existing testcase.
Add new testcase to cover lowercase key scenario.
How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
Co-authored-by: Zhijian Li <zhijianli@microsoft.com>
Why I did it
According to ACL-Table-Type-HLD, the value type of MATCHES, ACTIONS and BIND_POINTS should be list instead of string. Opening this PR to update the definition of BMCDATA and BMCDATAV6.
How I did it
Update the definition of BMCDATA and BMCDATAV6 in minigraph-parser.
How to verify it
Verified by UT and build SONiC image.
Co-authored-by: Zhijian Li <zhijianli@microsoft.com>
How I did it
Fix the regex for L4 port range in openconfig_acl.py.
How to verify it
Build image and install on Arista-720DT DUT, then try the repro steps in #16189 and confirmed the ACL rule be setup correctly:
Co-authored-by: Zhijian Li <zhijianli@microsoft.com>
src/sonic-linux-kernel
* db00eb9 - (HEAD -> 202205, origin/202205) PATCH] net: allow user to set metric on default route learned via Router Advertisement (#326) (2 days ago) [abdosi]
src/sonic-utilities
* 1ed5b5a9 - (HEAD -> 202205, origin/202205) Add transceiver status CLI to show output from TRANSCEIVER_STATUS table (cherry-pick to 202205) (#2950) (4 days ago) [longhuan-cisco]
* ba327726 - Fix in config override when all asic namespaces not present in golden_config_db (#2946) (4 days ago) [judyjoseph]
How I did it
Update Yang definition of IN_PORTS and OUT_PORTS to string.
Since we cannot split the string with comma (,) and validate each substring is a valid SONiC port name. The only restriction for them is must be a string.
How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
Build a SONiC image based on 202205 branch and installed on physical DUT. Re try the steps in [Yang] Incorrect definition of IN_PORTS and OUT_PORTS in sonic-acl.yang #16190 and can see below success response:
Co-authored-by: Zhijian Li <zhijianli@microsoft.com>
src/sonic-platform-common
* a6dd67e - (HEAD -> 202205, origin/202205) Comment out tx power validation check and program the passed value (#389) (29 hours ago) [abdosi]
Adding yang model for CONFIG_DB table MUX_LINKMGR|SERVICE_MGMT.
sign-off: Jing Zhang zhangjing@microsoft.com
Co-authored-by: Jing Zhang <zhangjing@microsoft.com>
