sonic-cfggen call is slow and this is taking place in the SONiC
boot up process. The change uses templates to assemble all required
vars into single template file. With this change, telemetry now calls
once into sonic-cfggen.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
Add related files to the device folder:
buffer config templates
pg lookup profile
port_config.ini
sai profile
sensor conf
plugins
Co-authored-by: Stephen Sun <stephens@mellanox.com>
This pull request was cherry picked from "#1238" to resolve the conflicts.
- Why I did it
Add support to specify source address for TACACS+
- How I did it
Add patches for libpam-tacplus and libnss-tacplus. The patches parse the new option 'src_ip' and store the converted addrinfo. Then the addrinfo is used for TACACS+ connection.
Add a attribute 'src_ip' for table "TACPLUS|global" in configDB
Add some code to adapt to the attribute 'src_ip'.
- How to verify it
Config command for source address PR in sonic-utilities
config tacacs src_ip <ip_address>
- Description for the changelog
Add patches to specify source address for the TACACS+ outgoing packets.
- A picture of a cute animal (not mandatory but encouraged)
**UT logs: **
UT_tacacs_source_intf.txt
Resubmitting the changes for (#4825) with fixes for sonic-bgpcdgd test failures
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
thermalctld throwing error messages because it is not yet fully configured, disabling it for now on arista platforms.
Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
also update submodule
* 01f810f 2020-07-02 | fix compiling issue for gcc8.3 (#1339) [lguohan]
* 9b13120 2020-07-03 | Fix in script to avoid orchagent crash when port down followed by fdb delete (#1340) [rupesh-k]
* 9b01844 2020-07-01 | [qosorch] Update QoS scheduler params for shaping features (#1296) [Michael Li]
* 86b5e99 2020-07-02 | [mirrororch] Port Mirroring implementation (#1314) [rupesh-k]
* c05601c 2020-06-24 | [portsyncd]: add debug message if a port cannot be found in port able (#1328) [lguohan]
* a0b6412 2020-06-23 | COPP_DEL_fix: DEL for one trap group from SONIC is resetting all the trap IDs (#1273) [SinghMinu]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
- Xilinx/pericom peripherals are not actively used in DellEMC S6100 switch.
- These peripherals are throwing PCIE corrected messages in some of the units and filling syslog.
- Since it is not usable disabling it at startup.
make swss build depends only on libsairedis instead of syncd. This allows to build swss without depending
on vendor sai library.
Currently, libsairedis build also buils syncd which requires vendor SAI lib. This makes difficult to build
swss docker in buster while still keeping syncd docker in stretch, as swss requires libsairedis which also
build syncd and requires vendor to provide SAI for buster. As swss docker does not really contain syncd
binary, so it is not necessary to build syncd for swss docker.
* [submodule]: update sonic-sairedis
* ccbb3bc 2020-06-28 | add option to build without syncd (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 4247481 2020-06-28 | install saidiscovery into syncd package [Guohan Lu]
* 61b8e8e 2020-06-26 | Revert "sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624)" (#630) [Danny Allen]
* 85e543c 2020-06-26 | add a README to tests directory to describe how to run 'make check' (#629) [Syd Logan]
* 2772f15 2020-06-26 | sonic-sairedis: Add support to sonic-sairedis for gearbox phys (#624) [Syd Logan]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
* Loopback IP changes for multi ASIC devices
multi ASIC will have 2 Loopback Interfaces
- Loopback0 has globally unique IP address, which is advertised by the multi ASIC device to its peers.
This way all the external devices will see this device as a single device.
- Loopback4096 is assigned an IP address which has a scope is within the device. Each ASIC has a different ip address for Loopback4096. This ip address will be used as Router-Id by the bgp instance on multi ASIC devices.
This PR implements this change for multi ASIC devices
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
If some table with a list of tuples (interface name, ip prefix) has ip prefixes without a mask length, it will cause issues in SONiC. For example quagga and frr will treat ipv4 address without a mask, so "10.20.30.40" address will be treated as "10.0.0.0/8", which is dangerous.
The fix here is that when pfx_filter get a tuple (interface name, ip prefix), where the ip prefix doesn't have prefix mask length, add a mask by default: "/32 for ipv4 addresses, /128 for ipv6 addresses".
Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>
* [sonic-buildimage] Changes to make network specific sysctl
common for both host and docker namespace (in multi-npu).
This change is triggered with issue found in multi-npu platforms
where in docker namespace
net.ipv6.conf.all.forwarding was 0 (should be 1) because of
which RS/RA message were triggered and link-local router were learnt.
Beside this there were some other sysctl.net.ipv6* params whose value
in docker namespace is not same as host namespace.
So to make we are always in sync in host and docker namespace
created common file that list all sysctl.net.* params and used
both by host and docker namespace. Any change will get applied
to both namespace.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Address Review Comments and made sure to invoke augtool
only one and do string concatenation of all set commands
* Address Review Comments.
Updated the NAT iptables patch for 4.19 buster
Depends on PR : Azure/sonic-linux-kernel#147
1 Known issue:
With both NAT patch files for 4.19 buster kernel, seeing 1 display issue in iptables like explained below
On Docker NAT, iptables supported version is 1.6.0 and on base OS it’s 1.8.2. So seeing an display issue of which fullcone option is not showing in version 1.8.2 iptables output and no issues in functionality.
Display issue – For example of comparsion:
NAT Docker:
root@sonic:/home/admin# docker exec -it nat bash
root@sonic:/# iptables -t nat -nvL
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 to:1.1.1.1 fullcone
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 30 packets, 2749 bytes)
pkts bytes target prot opt in out source destination
Chain POSTROUTING (policy ACCEPT 30 packets, 2749 bytes)
pkts bytes target prot opt in out source destination
root@sonic:/#
Base OS:
root@sonic:/home/admin# iptables-legacy -t nat -nvL
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
1 36 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 to:1.1.1.1
Chain INPUT (policy ACCEPT 1 packets, 36 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 41 packets, 3572 bytes)
pkts bytes target prot opt in out source destination
Chain POSTROUTING (policy ACCEPT 41 packets, 3572 bytes)
pkts bytes target prot opt in out source destination
root@sonic:/home/admin#
To fix this issue, iptables need to update from 1.6.0 to 1.8.2 version and have to update the NAT docker from stretch to buster. Will raise a new PR with this.
Signed-off-by: Akhilesh Samineni akhilesh.samineni@broadcom.com
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
* Support for connecting to DB in namespace via IP:port ( using docker bridge network ) for applications in multi-asic platform.
* Added the default IP as 127.0.0.1 if the IPaddress derivation from interface fails.
Moved the localhost loopback IP binding logic into the supervisor.j2 file.
1. Upgrade SAI headers to v1.6.3
2. Fix traffic lost during FFB related to buffer config + optimize buffer config timing for FB
3. Add ACL fields BTH, IP flags
4. Add ACL infrastructure of different fields per ASIC type
Add changes for syslog support for containers running in namespaces on multi ASIC platforms.
On Multi ASIC platforms
Rsyslog service is only running on the host. There is no rsyslog service running in each namespace.
On multi ASIC platforms the rsyslog service on the host will be listening on the docker0 ip address instead of loopback address.
The rsyslog.conf on the containers is modified to have omfwd target ip to be docker0 ipaddress instead of loopback ip
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Since we can not refer a dir in sonic-buildimage while jenkins testing of sonic-utilities.
We need to create build dependency on sonic_yang_models PKG too.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
* Changes to make default route programming
correct in multi-asic platform where frr is not running
in host namespace. Change is to set correct administrative distance.
Also make NAMESPACE* enviroment variable available for all dockers
so that it can be used when needed.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Fix review comments
* Review comment to check to add default route
only if default route exist and delete is successful.
* [systemd-generator]: Fix the code to make sure that dependencies
of host services are generated correctly for multi-asic platforms.
Add code to make sure that systemd timer files are also modified
to add the correct service dependency for multi-asic platforms.
Signed-off-by: SuvarnaMeenakshi <sumeenak@microsoft.com>
* [systemd-generator]: Minor fix, remove debug code and
remove unused variable.
**- Why I did it**
System health feature requires to read ASIC temperature and threshold from platform API
**- How I did it**
Implement Chassis.get_asic_temperature and Chassis.get_asic_temperature_threshold by getting value from system fs.
This patch addresses the following issues:
1) Platform drivers were not loading in the latest images. Fixed
the intialization script to make sure that all the drivers are
loaded.
2) Getting rid of "pstore: crypto_comp_decompress failed, ret = -22!"
messages during the kernel boot, after moving to 4.19 kernel. The
solution is to remove the files under '/sys/fs/pstore' directory.
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
The program name in critical_processes file must match the program name defined in supervisord.conf file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* src/sonic-platform-common 75698a8...82bbeab (9):
> [sfputil] Make SfpUtilHelper.get_physical_to_logical noexcept as in SfpUtilBase (#96)
> [sfp_base] Update return value documentation of channel-specific methods (#98)
> [sfp] Tweak key names of some transceiver info fields (#97)
> fix typo: portconfig.ini to port_config.ini (#94)
> [chassis_base] Add platform API support for system LED (#91)
> Add PCIe check commad (#64)
> [sfputilbase.py] Don't try to print EEPROM sysfs file name if we failed to read from it (#81)
> [sfputilbase | sfputilhelper] Add support of platform.json (#72)
> [eeprom] Add try-except to catch the IOError (#85)
* src/sonic-platform-daemons 0f4fd83...abe115e (2):
> [xcvrd] Tweak some transceiver info key names (#62)
> [psud][thermalctld] Always get fan/PSU LED status from platform API to avoid status inconsistencies (#59)
* src/sonic-utilities fd7781b...16a33f2 (9):
> [config] Fix syntax error (#966)
> [config] Fix indentation level in _get_disabled_services_list() (#965)
> a4e64d1 [sonic_installer] Refactor sonic_installer code (#953)
> 90efd62 [Show | Command Reference] Add Port breakout Show Command (#859)
> [sfpshow][mock_state_db] Tweak key names of some transceiver info fields (#958)
> [show] Add missing verbose option to "show line" (#961)
> [filter-fdb] Check VLAN Presence When Filter FDB (#957)
> [master]fix #4716 show ipv6 interfaces neighbor_ip is N/A issue (#948)
> Fix for command. show interface transceiver eeprom -d Ethernet (#955)
Note: sonic-utilities update fixes#4716
Issue: Port with AOC cable does not come up when "sfputil reset <port_name>" is executed.
Modified the incorrect mask used in reset API to resolve the issue.
* c60b1f4 2020-06-26 | e1000: Do not perform reset in reset_task if we are already down (#148) (HEAD -> master, origin/master, origin/HEAD) [lguohan]
* c6aeedd 2020-06-25 | Updated NAT kernel patch for 4.19 buster (#147) [Akhilesh Samineni]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
Initially, the critical_processes file contains either the name of critical process or the name of group.
For example, the critical_processes file in the dhcp_relay container contains a single group name
`isc-dhcp-relay`. When testing the autorestart feature of each container, we need get all the critical
processes and test whether a container can be restarted correctly if one of its critical processes is
killed. However, it will be difficult to differentiate whether the names in the critical_processes file are
the critical processes or group names. At the same time, changing the syntax in this file will separate the individual process from the groups and also makes it clear to the user.
Right now the critical_processes file contains two different kind of entries. One is "program:xxx" which indicates a critical process. Another is "group:xxx" which indicates a group of critical processes
managed by supervisord using the name "xxx". At the same time, I also updated the logic to
parse the file critical_processes in supervisor-proc-event-listener script.
**- How to verify it**
We can first enable the autorestart feature of a specified container for example `dhcp_relay` by running the comman `sudo config container feature autorestart dhcp_relay enabled` on DUT. Then we can select a critical process from the command `docker top dhcp_relay` and use the command `sudo kill -SIGKILL <pid>` to kill that critical process. Final step is to check whether the container is restarted correctly or not.
The current stdout file which also includes the dut logs are very verbose and noisy.
We have manually installed it in the sonic-mgmt docker in our organization and tuned the pytest settings to produce very helpful and concise logs.
pytest-html plugins can be used to post-process the output in various ways based on our different and unique organizational needs.
Hence proposing to add this pkt to the docker file
**- Why I did it**
After discussed with Joe, we use the string "/usr/bin/syncd\s" in Monit configuration file to monitor
syncd process on Broadcom and Mellanox. Due to my careless, I did not find this bug during the
previous testing. If we use the string "/usr/bin/syncd" in Monit configuration file to monitor the
syncd process, Monit will not detect whether syncd process is running or not.
If we ran the command `sudo monit procmactch “/usr/bin/syncd”` on Broadcom, there will be three
processes in syncd container which matched this "/usr/bin/syncd": `/bin/bash /usr/bin/syncd.sh
wait`, `/usr/bin/dsserve /usr/bin/syncd –diag -u -p /etc/sai.d/sai.profile` and `/usr/bin/syncd –diag -
u -p /etc/sai.d/said.profile`. Monit will select the processes with the highest uptime (at there
`/bin/bash /usr/bin/syncd.sh wait`) to match and did not select `/usr/bin/syncd –diag -u -p
/etc/sai.d/said.profile` to match.
Similarly, On Mellanox Monit will also select the process with the highest uptime (at there
`/bin/bash /usr/bin/syncd.sh wait`) to match and did not select `/usr/bin/syncd –diag -u -p
/etc/sai.d/said.profile` to match.
That is why Monit is unable to detect whether syncd process is running or not if we use the string “/usr/bin/syncd” in Monit configuration file. If we use the string "/usr/bin/syncd\s" in Monit configuration file, Monit can filter out the process `/bin/bash /usr/bin/syncd.sh wait` and thus can correctly monitor the syncd process.
**- How I did it**
**- How to verify it**
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
sonic-utils has sonic-yang-mgmt as build time deps, which inturn installs libyang.
libyang is needed to run newly added test.
If sonic-yang-mgmt is already built then libyang will not be installed in slave docker
without this PR and test will not run.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
