Aravind Mani
54e32c1f30
[201811] Dell S6100:Add serial-getty service to monit ( #8410 )
...
Why I did it
serial-getty service exited in Dell S6100 device randomly.
How I did it
Added serial-getty to monit services.
How to verify it
Stop serial-getty in ssh session and check whether the service restarts or not.
2021-08-19 10:14:03 -07:00
Santhosh Kumar T
1952afdeed
[201811] DellEMC S6100 SSD Monitor porting changes ( #7290 )
...
Why I did it
To monitor the SSD health condition in DellEMC S6100 platform post upgrade.
A daemon is introduced to monitor the SSD every one hour.
To check for SSD status at boot time and at the time of cold-reboot.
All these changes are supported only for newer SSD firmware.
Porting changes from 201911 branch
Added a platform_reboot_pre_check script to prevent cold-reboot based on SSD status.
Depends on Azure/sonic-utilities#1557
2021-05-04 09:44:24 -07:00
Aravind Mani
7e6fa15784
Dell S6100 fix mux log issue ( #5413 )
...
IOM completion log was not seen in syslog.
2020-09-21 12:19:07 -07:00
Aravind Mani
bee516e370
Dell S6100- Fix PCA MUX attachment issue ( #5401 )
...
* Dell S6100- Fix PCA MUX attachment t issue
* Update s6100_i2c_enumeration.sh
* Update s6100_i2c_enumeration.sh
2020-09-20 20:05:53 -07:00
Santhosh Kumar T
a2cb92056a
Dell S6100 Port I2C changes to 201811 branch ( #5150 )
...
* Dell S6100 Port I2C changes to 201811 branch
* Update s6100_i2c_enumeration.sh
2020-08-18 14:38:28 -07:00
paavaanan
11920b37a0
[devices]: DellEMC S6100 Watchdog support ( #2835 )
2019-12-11 17:45:34 +00:00
sridhar-ravindran
d4758afdde
[DELL] S6100 Add PowerCycle Support for Last Reset Reason ( #3402 )
...
* [DELL] S6100 Add PowerCycle Support for Last Reset Reason
* handle first time boot properly
* S6000 Last Reboot Reason Fix
2019-09-09 22:33:32 -07:00
sridhar-ravindran
ba3d85e71f
[DELLEMC][S6000] 201811 Porting of Platform 2.0 Reboot Reason ( #3156 ) ( #3286 )
2019-08-07 11:08:03 -07:00
sridhar-ravindran
148df177ba
[devices]: DELL Platform 2.0 API Infra and Reboot Reason support in Z9100 & S6100 ( #3147 )
2019-07-23 15:22:16 -07:00
paavaanan
b54d7874c6
[devices]: DellEMC S6100/Z9100 sensor.conf update ( #2861 )
2019-05-09 16:55:37 +00:00
Ying Xie
5663c812e1
Revert "[devices]: Watchdog enable/disable in DellEMC S6100 ( #2730 )" ( #2817 )
...
This reverts commit 22d17da09c
2019-04-26 15:25:50 +00:00
paavaanan
034ac41e57
[devices]: Watchdog enable/disable in DellEMC S6100 ( #2730 )
2019-04-18 16:55:26 +00:00
padmanarayana
14a0297128
[devices]: Address Dell issue#46 : Adding MUX reset logic to fix probe failures ( #2356 )
2019-01-08 15:27:16 -08:00
paavaanan
bcd4e1e375
[devices]: Dell SMF driver hwmon number reorder fix for Dell S6100/Z9100 ( #2305 )
2018-12-04 20:55:37 -08:00
padmanarayana
c4154eb9a9
[devices]: Add GPIO interrupt enable for Z9100/S6100 and transceiver-plug-inout-event for Z9100 ( #2025 )
2018-09-09 00:13:19 -07:00
Shuotian Cheng
a99008356b
[dell]: Remove depmod -a from the platform initialization script ( #1954 )
...
depmod -a will be executed automatically after the package get installed
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
2018-08-22 17:12:05 -07:00
Guohan Lu
9047edc38e
[platform]: move dell platform modules into buildimage repo
...
Signed-off-by: Guohan Lu <gulv@microsoft.com>
2018-08-13 10:39:07 +00:00
